Okay so I made (tried to make) a USB OTG cable by taking the metal off the outside of the USB connector, then cutting and reconnecting the cable with red on black and green on white so it would be the same polarity as a female USB. i plugged a flash drive up and nothing happened.
Here is where my retarded moment comes in: I HOOKED IT UP TO THE COMPUTER WITH THE POLARITY REVERSED!!!!
Now it wont even boot up. :crying:
I have a HTC One (AT&T).
PLEASE HELP!!!
I also don't want to send it back because this will be the third phone in 3 months (1st: xperia tl soft bricked returned 2nd: xperia tl hard bricked returned 3rd: i hope it will still work, but i need your help). . i will take ANYTHING except for taking it apart (that's why there is geek squad but that costs money and I'm broke).
if i need to go into more detail i will but please tell me or else i wont know.
wires:
red----------black
white----------green
black----------red
green----------white
i think it blew a fuse, but if so how would i fix it? does it even have a fuse?:crying:
Oh dear! You've lived up to your name anyway. The phone is frazzled!
Next time get a schematic of the cable wiring or buy a cable. It'll be cheaper in the end.
Your phone shop should replace the phone though - just don't tell them your story
CtrlAltDelIrl said:
Oh dear! You've lived up to your name anyway. The phone is frazzled!
Next time get a schematic of the cable wiring or buy a cable. It'll be cheaper in the end.
Your phone shop should replace the phone though - just don't tell them your story
Click to expand...
Click to collapse
that is not what i wanted to hear but thank you anyways. :crying: :crying:
maybe since it wont boot up at&t wont have any way to know about the unlocked bootloader and cyanogenmod (they let me get a new phone for free even after rooting and bricking both my xperia tl's. All i had to do was say that the update broke itor the battery wouldn't hold any charge.) But I JUST got it two or three days ago so I feel very crappy now.
at least i have google voice on my computer and kindle fire.
WHY DIDN'T I WATCH THE STUPID VIDEO!!!! the answer is i am a freaking idiot.
When you say "phone shop", does best buy fit in that category? or is there any possible way to fix it from home?
Related
Unfortunately, my cat chewed off my 40-pin usb charging cable and I'm going nuts atm... so has anyone found anywhere that might sell a cable like this? I looked pretty much all the online places and they're none existence, perhaps if i take it to local phone shops, will they be able to solder it up?
jc.extreme said:
Unfortunately, my cat chewed off my 40-pin usb charging cable and I'm going nuts atm... so has anyone found anywhere that might sell a cable like this? I looked pretty much all the online places and they're none existence, perhaps if i take it to local phone shops, will they be able to solder it up?
Click to expand...
Click to collapse
To be honest i do not think they sell those separately yet
My first guess is to call Asus directly, and tell them what happened and they might send you a new one or let you buy one over the phone if you feel comfortable doing that
Or even contact them on Facebook they actually monitor that very well
As for the cable splice, i am not sure of any phone shops that would do that, at least in my area, maybe a electronics repair shop would be better, probably charge you an arm and a leg though
If i had bought a dock with my transformer, i would send you my extra cable
SlimDan22 said:
If i had bought a dock with my transformer, i would send you my extra cable
Click to expand...
Click to collapse
No extra cable with the dock...unless I got shorted one.
So I spent over an hour talking on the phone with them this morning, apparently, they don't even have a part number for the cable, I even had to convince them that this doesn't sell in the local shops first. Now they're saying there'll be a "special" team which will contact me within 24 hours to solve the problem. Sigh...I knew asus support sucks and was hoping the product to last long without needing support but...
jc.extreme said:
So I spent over an hour talking on the phone with them this morning, apparently, they don't even have a part number for the cable, I even had to convince them that this doesn't sell in the local shops first. Now they're saying there'll be a "special" team which will contact me within 24 hours to solve the problem. Sigh...I knew asus support sucks and was hoping the product to last long without needing support but...
Click to expand...
Click to collapse
Asus were brilliant for us when my Mum had a problem with her Eee PC a couple of years back - screen failed, got a brand new one within a week. Couldn't argue at all!
It does seem vary by product, hopefully they'll contact me soon.
jc.extreme said:
So I spent over an hour talking on the phone with them this morning, apparently, they don't even have a part number for the cable, I even had to convince them that this doesn't sell in the local shops first. Now they're saying there'll be a "special" team which will contact me within 24 hours to solve the problem. Sigh...I knew asus support sucks and was hoping the product to last long without needing support but...
Click to expand...
Click to collapse
Don't tell them your cat chewed it. You're better off saying it's defective and the store won't take it back and demand a replacement. When they get yours back they'll charge you for the cat-chewed cable and everyones happy.
Telling them it was your fault will not get anything done quickly, because they don't have to give you a new one. Try it the other way around and at least you can get a working cable and they'll charge the money it would have cost to sell it to you.
Hope it all works out.
ddrstreak said:
No extra cable with the dock...unless I got shorted one.
Click to expand...
Click to collapse
My bad, i thought the dock came with a cable because that would be the most obvious thing to include , guess i was wrong lol
I called again later and on the third time was able to get a RMA for it, sent it to the service center right afterwards so hopefully I can get a phone call sometimes next week about the payment. But from what they said, it seems like they don't have these things on stock for replacement, kinda sucks since I'll be out of country in a week and half.
I've never repaired a cable before, so I haven't a clue what I'm talking about, but if the wires inside of the cable are color coded, I bet with a pair of wire strippers and a little solder and electrical tape, you might be able to do the job yourself.
hotelmode said:
I've never repaired a cable before, so I haven't a clue what I'm talking about, but if the wires inside of the cable are color coded, I bet with a pair of wire strippers and a little solder and electrical tape, you might be able to do the job yourself.
Click to expand...
Click to collapse
I peaked through the opening of the cable, the wires were extremely small where I could not see the inner metal wires within the cables and they seem like un-strippable (so thin that I'm afraid to break it with typical wire stripper), also there're metal wires on the outside wrapping the inner cables which are also damaged. Just gonna give up and let them send me a new one.
ASUS suggested website
BTW, one of the reps were telling me to go to this website and check if they have the cables in stock http://www.asusparts.eu/index.php
I think this will be the first place to have them if any charging/replacement kits would be available. However, currently there're nothing related to the TF.
jc.extreme said:
Unfortunately, my cat chewed off my 40-pin usb charging cable and I'm going nuts atm... so has anyone found anywhere that might sell a cable like this? I looked pretty much all the online places and they're none existence, perhaps if i take it to local phone shops, will they be able to solder it up?
Click to expand...
Click to collapse
Now bad is it? If the 40 pin end is intact I could fix it.
~DC
hotelmode said:
I've never repaired a cable before, so I haven't a clue what I'm talking about, but if the wires inside of the cable are color coded, I bet with a pair of wire strippers and a little solder and electrical tape, you might be able to do the job yourself.
Click to expand...
Click to collapse
I'm planning to pinout the 40 pin at some point. If I send you postage would you send it to me?
~DC
I wish you replied earlier, I sent it through RMA back to ASUS last friday :S
Unfortunately they are not available yet. But here is a link for the power cord.
http://www.excaliberpc.com/606705/asus-transformer-tf101-ac-adapter.html
Gary_S said:
Unfortunately they are not available yet. But here is a link for the power cord.
http://www.excaliberpc.com/606705/asus-transformer-tf101-ac-adapter.html
Click to expand...
Click to collapse
I found out that they listed them over last weekend, also sent them an email asking when the cables will be available.
They replied:
transformer is now delayed to mid-June.
Sorry to have to give you the bad news...
But im not sure if they're talking about the tablet or cables, gonna ask them again and see what they reply.
Sorry you are having to cope with the problem. It's got to be very frustrating. I'm waiting for my TF to arrive from Amazon. It will be at least a month from order to delivery, but that's got to be less frustrating than having it in your hands, and not being able to use it.
I'm sure the USB connection for charging uses only 3 or 4 wires, so it might be relatively easy to temporarily wire it, but at best, it would be highly vulnerable to breakage. I think you made the right choice to RMA it back and get a new one.
I have a quick question for anyone that already has a charging cable. Approximately how long is it? I looked at the picture in the link, with it wrapped up, but it doesn't look very long. Anything less than 6' will be less than perfect for me, although I could use a USB extension cable if necessary.
My power adapter died on me today!! I can charge with usb from my PC and now im using an old iphoneac adapter to charge with. It is really slow though, gained 1% in about 10 minutes....
rcm_rx7 said:
My power adapter died on me today!! I can charge with usb from my PC and now im using an old iphoneac adapter to charge with. It is really slow though, gained 1% in about 10 minutes....
Click to expand...
Click to collapse
Find a universal USB charger for an iPad. It should charge the TF while powered off, or at least with the screen off. It will take longer to charge, of course, but it should do the job.
Guys, I'm convinced the usb connector on my 9 month old TP is defective and gets worse each time I use it. I had bought a touchstone charger to ease the connector wear but still, I was eventually having problems with USB data connectivity using store bought cables. I even sent my TP in to fix the connector and when I got it back, still no USB connectivity. Just a completely wiped TP. So HP sent me one of their "genuine" silver dot cables and low and behold it worked fine. (My original cable was lost)
Now, months later, I'm having problems with the USB data connection again. I either get the "Not enough current message" in WebOS or no MTP USB symbol in CM9. Sometimes the PC will chime positively but with an error message (can't detect device). I received another genuine HP cable and it behaves the same as the other one. Inserting them normally, they appear to be in tight, the PC will chime but Windows will say that there's a problem, can't detect device. The only way to get it to work is to insert the microusb side at a 45 degree angle tilted downward and hold it in for 5 seconds, then (ever so slowly) release the pressure to the connector. 50% of the time I'll get a Windows message that says the USB is degraded and run slower than normal (which I think means it thinks its in USB1.1 slow xfer mode) and 50% it works fine at USB 2.0 (until I pull the cable out of the connector). I also have 2 store bought cables that won't ever successfully connect to USB with the TP but work fine with my Samsung cell in both charging and xferring music over to the phone.
So what I'm getting at here is that no standard microusb cable is the same and that there must be something special about the HP genuine one. Do these cables have a resistor on pin 4 ID tied to GND pin 5? Even so, I think what is wearing the most is pins 1 & 2 and maybe 3 (VCC and the data pins) which is why it may only work by concentrating on seating those pins first. Does it make sense that the 'can't detect device' message comes up with just the data lines and ground connected but no VCC? For that matter, why would the battery symbol in CM9 always show the lightning bolt assuming pin 1 VCC is not connected?
I'd appreciate any responses from other members here since I believe without USB the TP could be bricked in case some boot code gets corrupt and you are forced into WebOS recovery mode. This has never happened to me yet and I've installed a lot of nightlies but it COULD happen, no guarantees. What is inevitable is my connector will eventually wear out and my TP will only live until the bootloader DOES get corrupt, hopefully later than sooner. This could be the case with all TP's. Just imagine if in a couple of years everyone's TP's USB port goes bad. Sounds like the devs should figure out a way to fix a bricked TP wirelessly, if that's at all possible.
Thanks,
synchron
One of my Touchpad's had the same problem in Webos it said using wrong charger may not charge or something similar and with Android ie nightly the charging signal came up but it did not charge.
I spoke to HP and pointed out that I have 2 Tablets and that swapping leads or chargers made no difference all combinations worked on one but not the other.
They agreed to fix it and replaced the part. It is now working fine. And as with yours my computer failed to recognize the tablet properly.19 times out of 20 on the one time it did I was able to back up and remove Android before HP picked it up.
I would send it back under warranty or if that has expired state that it was preexisting. Otherwise as you said it is going to become pretty much unusable.
Don't let them fob you off.
Good luck
spaceosc said:
if u bought it during the fire sale u have about a week till (8/20) the one year warranty expires.
http://kb.hpwebos.com/wps/portal/kb/na/touchpad/touchpad/wifi/supportservices/page_en.html
go to palm support and CHAT with them. do not call cuz that cost money.
once u get an RMA they will send a box and take care of Shipping.
then go here to wipe and remove android
http://forum.xda-developers.com/showthread.php?t=1426244
once wiped send it in and your speaker will be fixed, it will take about a week.
Click to expand...
Click to collapse
from another thread
sstar said:
One of my Touchpad's had the same problem in Webos it said using wrong charger may not charge or something similar and with Android ie nightly the charging signal came up but it did not charge.
I spoke to HP and pointed out that I have 2 Tablets and that swapping leads or chargers made no difference all combinations worked on one but not the other.
They agreed to fix it and replaced the part. It is now working fine. And as with yours my computer failed to recognize the tablet properly.19 times out of 20 on the one time it did I was able to back up and remove Android before HP picked it up.
I would send it back under warranty or if that has expired state that it was preexisting. Otherwise as you said it is going to become pretty much unusable.
Don't let them fob you off.
Good luck
Click to expand...
Click to collapse
spaceosc said:
from another thread
Click to expand...
Click to collapse
Thanx for your prompt responses. I bought my TP at the 2nd fire sale through BB in early Nov so I still got a few more months but I would rather wait a bit more since they did nothing the 1st time around. I think the connector is on some daughter board along with the vibrate device which is soldered to the main board. Doesn't sound like a big deal to repair it. Still, what makes the HP cable different then the others? Are there known cables I can get online that might be made better to always work and make better contact than the HP ones?
Synchron
synchron50 said:
Thanx for your prompt responses. I bought my TP at the 2nd fire sale through BB in early Nov so I still got a few more months but I would rather wait a bit more since they did nothing the 1st time around. I think the connector is on some daughter board along with the vibrate device which is soldered to the main board. Doesn't sound like a big deal to repair it. Still, what makes the HP cable different then the others? Are there known cables I can get online that might be made better to always work and make better contact than the HP ones?
Synchron
Click to expand...
Click to collapse
dont wait, ive sent my TP in 3 times, 1st time for charging port, 2nd for a crack around the speaker, 3rd for a busted speaker.
spaceosc said:
dont wait, ive sent my TP in 3 times, 1st time for charging port, 2nd for a crack around the speaker, 3rd for a busted speaker.
Click to expand...
Click to collapse
Thanks for your advice. Did they fix everything that was intended? Was turn around time no longer than 2 weeks for each repair? When was your last repair (busted speaker) done? Is your serial number the same or did you ever get a replacement (meaning a refurbished one) back?
Thanks
synchron50 said:
Thanks for your advice. Did they fix everything that was intended? Was turn around time no longer than 2 weeks for each repair? When was your last repair (busted speaker) done? Is your serial number the same or did you ever get a replacement (meaning a refurbished one) back?
Thanks
Click to expand...
Click to collapse
i keep track of the serials and they always came back the same. i have more than one pad and i asked for one to be replaced completely. we will see if that happens. but they fix only what u ask for and nothing else.
it can take longer depending on Weekends. takes 2 days to get your box, then 2 days to get it to HP, then 3- 4 days to get your fixed unit. its all done thru UPS, cant send it out on the weekends or receive it
spaceosc said:
i keep track of the serials and they always came back the same. i have more than one pad and i asked for one to be replaced completely. we will see if that happens. but they fix only what u ask for and nothing else.
it can take longer depending on Weekends. takes 2 days to get your box, then 2 days to get it to HP, then 3- 4 days to get your fixed unit. its all done thru UPS, cant send it out on the weekends or receive it
Click to expand...
Click to collapse
Thanks, you are giving me hope to try again while my warranty is still good. Maybe I'll put a big note on the screen PLEASE REPLACE USB CONNECTOR - wouldn't hurt.
Synchron50
I know this is really old, but im finding my self with similar issues and no warrenty
synchron50 said:
Guys, I'm convinced the usb connector on my 9 month old TP is defective and gets worse each time I use it. I had bought a touchstone charger to ease the connector wear but still, I was eventually having problems with USB data connectivity using store bought cables. I even sent my TP in to fix the connector and when I got it back, still no USB connectivity. Just a completely wiped TP. So HP sent me one of their "genuine" silver dot cables and low and behold it worked fine. (My original cable was lost)
Now, months later, I'm having problems with the USB data connection again. I either get the "Not enough current message" in WebOS or no MTP USB symbol in CM9. Sometimes the PC will chime positively but with an error message (can't detect device). I received another genuine HP cable and it behaves the same as the other one. Inserting them normally, they appear to be in tight, the PC will chime but Windows will say that there's a problem, can't detect device. The only way to get it to work is to insert the microusb side at a 45 degree angle tilted downward and hold it in for 5 seconds, then (ever so slowly) release the pressure to the connector. 50% of the time I'll get a Windows message that says the USB is degraded and run slower than normal (which I think means it thinks its in USB1.1 slow xfer mode) and 50% it works fine at USB 2.0 (until I pull the cable out of the connector). I also have 2 store bought cables that won't ever successfully connect to USB with the TP but work fine with my Samsung cell in both charging and xferring music over to the phone.
So what I'm getting at here is that no standard microusb cable is the same and that there must be something special about the HP genuine one. Do these cables have a resistor on pin 4 ID tied to GND pin 5? Even so, I think what is wearing the most is pins 1 & 2 and maybe 3 (VCC and the data pins) which is why it may only work by concentrating on seating those pins first. Does it make sense that the 'can't detect device' message comes up with just the data lines and ground connected but no VCC? For that matter, why would the battery symbol in CM9 always show the lightning bolt assuming pin 1 VCC is not connected?
I'd appreciate any responses from other members here since I believe without USB the TP could be bricked in case some boot code gets corrupt and you are forced into WebOS recovery mode. This has never happened to me yet and I've installed a lot of nightlies but it COULD happen, no guarantees. What is inevitable is my connector will eventually wear out and my TP will only live until the bootloader DOES get corrupt, hopefully later than sooner. This could be the case with all TP's. Just imagine if in a couple of years everyone's TP's USB port goes bad. Sounds like the devs should figure out a way to fix a bricked TP wirelessly, if that's at all possible.
Thanks,
synchron
Click to expand...
Click to collapse
Hi all. I know this thread is really old, but I'm finding myself dealing with similar issues. And I'm obviously out of warranty. I can't get windows, linux, or Toolbox to pick up the USB. I'm actually in a worse case scenario mention here and am stuck in meboot, TWRP, and WebOS recovery, because I had wiped the rom. It must be an issue with the USB port, I've lost track of my original Hp touchpad OEM cable, and have tried every USB cable I can find. Any help would be appreciated.
Somehow the micro usb port on the phone (the charger) has been mashed up inside, i think it may have been due to someone trying to fit the wrong charger into it.
a shop said it'd have to get sent away,
i was wondering if their is a place to send it to get fixed or it it fixable ?
atm im having to charge another battery with a docking station and swap battery's because it wont charge,
it did work a little earlier on today, charging. but i can see the insides are pretty well destroyed.
it looks like the piece can be removed and a new one soldered on,
any ideas ?
thanks.
Honestly, if somone on here knows how to fix hardware issues I am sure they can lend you a hand but otherwise you will have to go to a repair shop and have it serviced. Just make sure that everything is complete stock and bootloader is in locked state just to be safe. If you don't want to send it back through the mail you can always take to a sprint authorized repair shop.
If you want to attempt it yourself here you go
http://www.youtube.com/watch?v=jxiv3x88eRg
http://www.youtube.com/watch?v=fdxrPWrVgR8
http://www.youtube.com/watch?v=I-HlZQKQzoQ
http://www.ebay.co.uk/itm/New-HTC-E...K_Replacement_Parts_Tools&hash=item20ca337adf
Thanks guys, ive been looking online and some places seem to say they can fix it,
that video is just jokes, he faffs around with the thing im sure he ha no idea what hes doing.
ive found usb ports for other htc models just not the evo 3d.
ive realised it is quite a common problem
its charging via my docking station... just. obviously the internals of the micro usb are mashed up, and i know the replacement needs to be soldered on,
ive looked on some websites but cannot find anywhere to fix it.
its ok atm as its charging via dock, and i have a spare battery, also i can just take out my sd card to add stuff but it i rather annoying abd id like it fixed asap.
You could always use WiFi file explorer,of course WiFi is required but you can read and write the sdcard from your ip address,
Signature (Don't ask me for help, couldn't careless if your phone explodes)
strange thing is its connecting via my dock.. and charging, eventho the insides of the micro usb are mashed up..
it wont work with any other cable just in the dock...
im guessing the dock pin is slightly larger thus allowing a connection ?
Hey, I ran into a funny/dumb situation. I was on a trip and broke my micro usb port on the S3 and it was crucial for me to use the phone that couple of days (it was drained) so I found out that I can pin the wires from a regular USB cable (+ and -) out of my laptop to my battery while it was in the phone so it worked for a few times i got the charge. But then after the 5th(ish) charging the phone is not switching on... Yeah, I know, I probably fried my main board on the S3. The question is, is it worth to get it fixed? I really liked that phone though, I was not planning to change it until the S6 came out or something. Is it just waste of money and I should look out for a newer one or can fix it for a reasonable price?
Could you suggest something guys? Would really appreciate your help.
Thanks.
New motherboard is more expensive than a second hand phone would be.
So I fell on the ground with the phone hanging on a neckband around my neck at the time of the fall; screen is busted... Let me remind you phone was NOT rooted yet (I bought it the night before, didn't get to it YET), with a trick found on YouTUBE connecting an OTG USB adapter to the phone and connecting any USB mouse to this OTG adapter, then this broken screen will have a little cursor/arrow light up;
Obviously, after that you can do whatever with a cursor coming up on this broken screen and with normal clicks you are all set...
But now is another problem......
In order for me to be able to take a full backup of that broken LG and to be able to load it on to this one, I would need to have the phone ALSO plugged in with my PC at one point of time.... now here is a dilemma... mouse is already there.
And I’m %100 sure that there has to be a workaround for this situation. Maybe there is an app in store that can do this for you? I can’t be the first to bust my screen, right?
Can't find a link for my G3, but this very simular. http://podfob.com/products/samsung-galaxy-s6-podfob
Thanx folks
P.S. Later tonight I'll be getting my new LG replacment phone. So please, give me your advice??