hi all,
im new to android and i successfully rooted the tablet (if anyone is having trouble rooting T10, im more then happy to help), and now id like to put a custom rom on it of course , but the problem is there arent any that are specifically for Alcatet T10. Id like to try cyanogen or AOKP, but they all focus on specific devices and since there arent any for T10 i dont know which one to chose. More specifically id like to know where does T10 fits in similarity or what not with the other models (tablet, phones) and if there are any that are similar can i use that ROM to install on T10. I just need to know if something bad can happen if I use ROM which is not specifically for T10, and if something goes wrong can I return to stock ROM?
any help is very appriciated, tnx in advance
tablet specs are:
Operating System : Android 4.0.3 Ice Cream Sandwich
Application Processor : Rockchip RK2918
CPU : 1GHz Cortex A8
System Memory : 1 GB DDR3
Storage Capacity : 4 GB NAND Flash
Wi-Fi : 802.11 b/g/n
Audio & Video Play : Built-in audio chip, 1080P HD playback
External Interface : Micro USB, Micro SD
Battery : 3000 mAh, 3.7V Lithium
Camera : Front camera 0.3Mpixel
wiki,cyanogenmod,org/w/P1c_Info --- remove coma and put dots
Samsung Galaxy Tab (CDMA) official cynogenmod ROM
what do you think about this one? its the most similar, has the same CPU, and T10 has 512Mb more RAM
a simple yes/no/maybe would suffice
Rooting T10
Hi,
I am at my wit's end. Trying to root the Alcatel T10. Each time I put it in debut mode and plug it in the USB, my pc just gives the "beep-beep-beep" of device not connected. On my device manager screen, the device shows as Other devices | one, and any attempt to install and/or update drivers just end in miserable failure.
In the past I have successfully rooted my Samsung Galaxy Gio, and Pocket, and unbricked my son's phone after he tried the same, so I'm not completely clueless in this regard. I just cannot get my T10 to connect to my PC in debug mode...
Any and all help will really be appreciated.
Since you say you have successfully rooted yours, maybe you can just point me in the right direction.
Thanks!
Hey guys,
This is my 1st post here ever.
The only time I fiddled around with rooting an android phone was more than a year ago when I had an AT&T Samsung infuse. I followed very detailed instructions on how to root it and upgrade it. It worked like a charm and I'm so grateful to all of you experts trying to help newbies.
A friend of mine went to China last month and brought me a Samsung s3 clone.
The phone is factory unlocked BUT
1. It doesn't have the original google play application. It has a similar logo which leads to a Chinese app store.
2. Google mail account application is missing
3. The phone supports only Chinese, Korean and English languages. (I'd like to use it in different ones)
So I need to re-install a good Android version that has all the Android features that I'm missing
I thought it would be easy to find instructions on how to do it it here, but unfortunately I wasn't lucky to find a direct and clear step -by step instructions for my phone model
Phone: Samsung Galaxy S3 GT-i9300
Model #: mtk6515_ics2
Android version: 4.0.4
Base band version: MAUI.11AMD.W12.22.SP.V14
Kernel Version: 3.0.13
[email protected]#1
Build Number: ALPS.ICS2.MP.V1.18
Custom Build Version: V15.12
Please help!
Is there anybody out there?
Is there anybody out there? :crying:
Hey man,
unfortunately I don't think anyone can help you rooting/changing roms as it's a replica and there isn't a real development for it.
BUT as for the play store you can DL the apk directly from here:
http://www.androidpolice.com/2013/05/14/download-latest-google-play-store-4-1-6/
As for the phone language, after installing the google play store look for:
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
and choose the language of your wishing. That is in case that your phone supports it.
If you mean by google mail account the gmail app then in that case:
http://www.androidpolice.com/2013/0...ith-slide-out-navigation-and-brand-new-inbox/
BTW for future references - try to make a search for yourself I'm sure you could've find those in less than a minute
Cheers.
Thanx
Thanx a lot for your effort and concern.
I downloaded the latest google play apk, I installed it, but it wasn't working apparently because "google login service" and "google services framework" were missing too!
So I downloaded them, but they needed to be installed in system/apps.
I downloaded "root explorer" which should help me accessing the system folder.
I copied&pasted the apps in system/apps but a message says "your phone should be rooted first in order to paste" came out.
So back to square1
On the other hand, I tried to disactivate some of the annoying Chinese applications that came with the system using "root app delete", and guess what?
I get the same message that I should root this phone first.
So how can I root this bloody thing???
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
eytan123 said:
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
Click to expand...
Click to collapse
I wish I could follow your advise. The shop is 4000 miles away in China.
There is a google store app installed, but it's fake. It has a similar icon but with different proportions. The problem is that it's in Chinese and it deals with chinese applications.
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
eytan123 said:
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
Click to expand...
Click to collapse
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
festerzio said:
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
Click to expand...
Click to collapse
If you flash recovery from different device, there's a big chance you brick it
Try to use MTKDroidTools to root it, its pretty safe.
As @lolet said correct, you can possibly brick your phone...
That's why I advise you to ask in the thread I've linked onto, there are fellows there with much more experience than myself with rooting your device.
I guess in the last couple of years I've flashed hundreds of times but only on samsung, htc and motorolas.
Cheers
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
zver16 said:
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
Click to expand...
Click to collapse
please this firmware link ,,,
So ...
I just flash my tablet with a closer model firmware, not the original factory.
It s an chinesse tablet EKEN a70h model a23 procesor from Allwinner
Everything it s ok till now, at list working camera,and gsensor problem.
In hardware info device app, not even show me the camera drivers .
Question : How can i edit kernel to fix those ???
( I know,flashing other firmwares then those for model type may cause running errors but i didn"t find the original firmware for my model so... i try this one and it works 80%.)
10x in advance
I have bought android chinese mobile phone and I need someone to guide me on how to install custom ROM on it. I have been searching for the last 4 days on all websites that support chinese clone phones trying to find a ROM for my phone but I have realized that my phone is not a clone of any other phone, it is simply chinese android phone without any brand name or private fake brand names.
The phone has the following specs:
Fabricante: G+ Modelo: S6 Chipset: MTK6595, CPU: 2.5GHZ Architecture: ARM Cortex-A7 Oct-Core, Ram: 4MB, Memory: 16MB , Android:4.4.3 (with lots of chinese apps) - Obs.: Antutu
I can install custom recovery and root the phone, this is not a problem at all. The problem I'm facing is finding a ROM for my phone. So, What I need is, just a ROM that will work on my phone. Since my phone doesn't belong to any brand name!
Q- Can I just flash any ROM of those chinese ROMS that are available on the internet for MTK6595 without changing the current kernel on the phone? as I believe all chinese phones that run same MTK chipset number has the same interface and everything else!
Q- Is there a universal ROM that can just be installed on any device without touching the kernel (just like installing windows on your computer)?
In your reply, please make sure your reply is detailed and don't make me guess steps in between.
Thank you
i have this iphone 8+ clone and tried rooting it with kingroot, kingoroot, iroot, drphone and mtk droid tool but wont work. i cant backup stock rom until i manage to brick it. so went on searching for stock rom and tried several but nothing works. sometimes it only boot upto logo or just plain white screen usually it say 4030 or not enough space until i found one that works but the camera and flash is not working it says cant connect to the camera i checked settings-app-app running-app installed but there is no app. i tried installing camera apk but still the same is there a way to fix this or can you recommend other stock rom i could try. i dont know what to do next hope someone can help.
THANKS IN ADVANCE
iphone 8 plus clone
Model : MN4A2ZP/A
Build number : LMY47I test-keys
Build date UTC : 20180508-032544
Android v : 5.1
Kernel v : 3.10.72
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P2
Hardware : MT6580M
i flashed
MT6580__iPhone8__MN4A2ZPA__iPhone8__5.1__ALPS.L1.M P6.V2.19_BENRUI6580.WE.L_P2.rar
and now my phone is booting normally and everything seems more responsive but camera and flash not working.
i tried this and several others but doesnt work
Iphone 8 Clone Firmware [mtkfirmware.net] --error4030
S209_8P_H_EN_V0.0.5
MT6580__Symphony__V120__V120__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P89
iPhone_8_Plus_Clone_MT6580_V2.6_20180118 --not enough space
iphone i8 plus mt6580 clone firmware --soft brick (4032)
Iphone 8 Clone Firmware [mtkfirmware.net] --soft brick
MT6580__iPhone__8_Plus__iPhone__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m
Need Help : Correct Firmware
marad1024 said:
i have this iphone 8+ clone and tried rooting it with kingroot, kingoroot, iroot, drphone and mtk droid tool but wont work. i cant backup stock rom until i manage to brick it. so went on searching for stock rom and tried several but nothing works. sometimes it only boot upto logo or just plain white screen usually it say 4030 or not enough space until i found one that works but the camera and flash is not working it says cant connect to the camera i checked settings-app-app running-app installed but there is no app. i tried installing camera apk but still the same is there a way to fix this or can you recommend other stock rom i could try. i dont know what to do next hope someone can help.
THANKS IN ADVANCE
iphone 8 plus clone
Model : MN4A2ZP/A
Build number : LMY47I test-keys
Build date UTC : 20180508-032544
Android v : 5.1
Kernel v : 3.10.72
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P2
Hardware : MT6580M
i flashed
MT6580__iPhone8__MN4A2ZPA__iPhone8__5.1__ALPS.L1.M P6.V2.19_BENRUI6580.WE.L_P2.rar
and now my phone is booting normally and everything seems more responsive but camera and flash not working.
i tried this and several others but doesnt work
Iphone 8 Clone Firmware [mtkfirmware.net] --error4030
S209_8P_H_EN_V0.0.5
MT6580__Symphony__V120__V120__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P89
iPhone_8_Plus_Clone_MT6580_V2.6_20180118 --not enough space
iphone i8 plus mt6580 clone firmware --soft brick (4032)
Iphone 8 Clone Firmware [mtkfirmware.net] --soft brick
MT6580__iPhone__8_Plus__iPhone__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m
Click to expand...
Click to collapse
same here but i have blank LCD problem, have you got correct firmware bro? [email protected]
vikas7144 said:
same here but i have blank LCD problem, have you got correct firmware bro? [email protected]
Click to expand...
Click to collapse
Yeah, I have the very same model and ROM but (when I flashed this ROM) I ended up with the blank LCD issue.
I've tried several lk.bin files (someone told me that it is a resolution problem, and should install another lk.bin) but can not fix the problem.
Any suggestion?
Thanks in advance
[email protected]