Related
Hi everyone, i am new at this forum and android devices, i searched for 2 days but cannot find exact answers for my problem
I bought an iphone 4s clone which the seller said that name is Gooapple V5 3G, android 2.3.5 is installed on it, but when i installed antutu benchmark and look at the system info, it is written:
Phone Model:
Parrot
Brand:
Mediatek
CPU Hardware:
MT6573
CPU Model:
ARMv6 Processor
CPU Frequency:
634.06 MHz
Screen Resolution:
320x480
......
Android Version:
2.3.5
Build Number:
ALPS.GB.FDD2.MP.V3.9
Kernel:
Linux version 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) #1 PREEMPT Thu Jun 28 14:01:43 CST 2012
and when i push '-' and power button together first Mediatek appears and after choosing version:
BB Chip: MT6573
MS Board. : lightning73_gg
Modem Ver. : MAUI.11AMD.W11.37.SP.V2, 2011/10/14 02.55
UBoot Ver. : 2010.06
......
is written.
First of all i am looking a rom which is android 4 for this phone. I searched for that and i saw that there are some phones with android 4.0 which has the MT6573 cpu. Do you know are there any rom like this which i can install on it? Are gooapple v5 3g roms compatible to this phone?
Also i installed the usb drivers for this phone and rooted the device, but i cant reach the sd card from pc, in my computer there occurs a removable device but not accesible. What is the solution of this?
Thanks
first of all, there are no mt6573 based smartphones out there, running android 4.0 . maybe someone is porting ICS to the mt6573, but right now i can not find 4.0 for it. there are phones put there with faked Android version, such as 4.0.9 or something.
yes, you can install different Roms on your device, but you have to port them first.
I have no answer for your question, maybe the SD card has a switch for read only?
i used wrong rom and lost the system of the device, now i need correct rom, is there anyone who has correct rom of this?
http://forum.xda-developers.com/showthread.php?p=28811045
you should take a look in this thread..
Chrizzly92 said:
http://forum.xda-developers.com/showthread.php?p=28811045
you should take a look in this thread..
Click to expand...
Click to collapse
i know this but this device is not gooapple
ahh sorry, my fault. i just flight over your post, it was late. mybe some aditional informaton ( pictures of the phone, the back, the back without battery...
those version numbers or names can be faked easily, it is hard to say what phone you have with the given information. greets, chris
you have to reflash your stock firmware.
i found the rom that works correct but i dont like ios interface on it. now i m looking for a rom which has android interface
use this tool to backup your current working firmware:
http://forum.xda-developers.com/showthread.php?t=1683883
and upload your Rom somewhere ( i only need boot.img and system.img ). I'm interested in the IOS interface and i can port almost all available mt6573 ROM's to your device.
I am currently working on a custom Rom with Cyanogenmod Settings,DSP manager, ICS themed , ext2 support and much more.
if you are interested, i can make you a flashable zipfile.
w w w.4shared-china.com/rar/GyMPoJuc/mt6375-236gps_backup.html
this is the rom i m using on my phone, all .img files in it
i dont like ios interface because it has lots of differences from real ios interface, text characters, icons, menus have lots of mistakes
and also roms for this device work too slow, is it possible to make lite and android gui custom rom for this device?
look at the pictures in my last post, this is a custom ROM made by me. the Mt6573 isn't that fast, but i tried to make a fast ROM for it.
it is working pretty fast right now, no chinese apps and a lot of customization you can do . there are a lot of ROM's out there, some are good, some are pretty bad. like i said, i can make a flashable zip for your device, so you can try out my ROM.
i can try if you can make a zip for me, this would really help me
also i have another problem with the rom which i gave the link of it, the network problem
if the gsm signal become too low, restricted access changed - voice service blocked error occurs, in my home and office signal is too low so i cant use the phone, do you know any solution for this?
i will make one asap, maybe your networking problems are gone with my ROM. im from Germany, have no problems here with the signal at all.
maybe your smartphone is just ****ed up, we will see later.
you got these problem too, before you got the new ROM? maybe the Baseband drivers are wrong or something...
Press VOL + and power toegether, what Recovery shows up? a standart mediatek one or do you already have a custom recovery?
i didnt use the phone with sim card before this rom so i dont know
recovery screen is standard mediatek
there you go! this is a clockworkmod recovery for your phone. just flash it with Flashtool and try it out! flashing a new rom becomes pretty easy with it. hope it will work, give me a quick response if it isn't working.
edit:
some minor tips: dont flash the preloader in any case, this could damage your phone, if it is the wrong one!!!
and always make a backup of the existing images!
i flashed with flashtool and didnt flashed preloader, dsp_bl, changed the recovery.img with the one you gave, nothing changed same ios gui, did i do something wrong?
do you have whole new rom for this device which includes all the image files in it? the one i shared here is too slow and some problems
the file i given you is ONLY the recovery, after flashing try it out with phone off and hold VOL+ and POWER, the recovery screen shows up with clockworkmod recovery.
the fully rom ( including boot.img and system.img) needs more work, i haven't the time to do it yet. just give me a day for it. porting a Rom to a diffrent screenresolution needs more work, cause my device is 480x800 pixels, yours only 320x480. i have to say, there can be some failures because of the different resolution, but this can be fixed easily.
the custom recovery i gave you is necessary for flashing new roms easily.
Hello,
I have a problem with the goophone i6 . I decided to reinstall the rom and after flashing roms to reloads (I tried a few / several) - but there is a problem with touch screen - for each new ROM touch screen crazy (something like in this link - youtube.com/watch?v=fflpQZX55M8 - attach a link to the cpu-z ( images70.fotosik.pl/785/bdb924969c415752.jpg )
I restored my rom from a backup ( CWM ) and the problem also appeared (if you think that not everything is removed from memory and a file kernel / driver remains?)
Do you think that the problem can cause the kernel ??
now MTK droid root & tools shows me
kernel v: 3.4.5-447903 ([email protected]) (gcc version 4.6.x-google 20,120,106 (prelelase) (GCC) # 1 SMP Tue Oct 14, 2014 4:07:41 p.m. CT
Previously I had:
3.4.5 kernel (eng.wangsongsong.1414117532)
images70.fotosik.pl/785/bdb924969c415752.jpg
Is the fault of the display driver?
Have you any ideas?
UP
Might be kernel problem, can you ask seller for rom?
dev.nul01 said:
Might be kernel problem, can you ask seller for rom?
Click to expand...
Click to collapse
yes, I got a rom from the seller but I suspect that he does not know because he sent me an official rom goophone which reacts in the same way .
I have the iPhone 6 goophone mtk6582 metal back. I am getting a bootloop when charged and when i press the hol n the back between th camera the screen is on but black. I have tried everything with sp tools. i cant even get that program to run, i plug it in and nothing happens. i tried mtk tools and this is how got into the problem i have, i think i flashed the boot and the recovery img. please can someone help me out. i have skype and teamveiwer so you can see if i am doing anything wrong. i was trying to flash the kitkat 4.2.2 but really i would just like it to work again. thanks in advace
Hello,
i recently bought a smartphone from Ali.
It's a MPIE M15 with MTK6595 (CPU-z is agree). Here's the specs :
Android Version : 5.0.0
Baseband : MOLY.WR8.W1315.MD.WG.MP.V43, 2014/09/17 10:10
Kernel : 3.4.67 [email protected] #1
Build Number : A100-HYDY 20150627-155331
Custom Build Version : 1435391497
Hardware : mt6595
After test, it's already rooted, i can access to Android Recovery.
The problem is that the installed rom is a Chinese Android version.
i want to install the factory Android Lollipop, but i cant find any version for my phone.
CyanogenMod installation via recovery have a OTA error..
So with my specs, is that possible to run another rom, like the Official Android (5.1?) and how to do it?
Thanks for your answer
Update
I understand that i have to install a custom recovery, but now i have a new problem..
MTK Droid Tools says the hardware is fake in Kernel or Firmware rolleyes not corresponding to the phone..
How to format all the phone, i want the Android Official Firmware on it, how to do that please ?..
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Ksaverii said:
OK MTK Droid Tools recognize my phone now. I do the backup for a custom TWRP recovery. if anyone know a link the original image of android .zip, thank you to tell me..
i continue :cyclops:
Click to expand...
Click to collapse
Please write if you find the program Im interested in purchasing that phone, but don't want to learn chinese
By the way, how that phone looks like in real life? All options works normally?
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components.
It's sold for a MTK6595, in fact it's a MTK6572. Same for Android, it's KitKat, not Lollipop. Not sure about the RAM (maybe 2Go). 1 virus app (AVG). Chinese stuff installed. I bought it 85$ from Ali (i understand now^^). The Camera is sh**, really! (but photo is not a prob for me).
Im not an experimented dev, the phone seems to be block somewhere, it's very hard to launch a custom recovery. I extracted the Stock ROM with MTK Droid Tools.
Finally, I install a custom recovery after a day of search, the Carvil Touchscreen and make it stable for the mPie. Now i want to install a Custom Rom on it, after replace the boot.img from Stock to Port, i have to modify the kernel, i will see..
If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Ksaverii said:
Hello, after two days working on the phone, i'm almost there.
First, this phone is faking his own components... If i managed a custom rom to get worked, i will post a tuto, if someones are interested
i continue :cyclops:
Click to expand...
Click to collapse
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
keramik said:
Thanks for response. I wanted that phone for my kid, to let him play android games instead of killing my own phone with that trash
Click to expand...
Click to collapse
I found a original custom rom for this on needrom, but the phone still faking his hardware.. The kernel is fake and i don't know what to do now.
It's not a Mpie M15 (fake), it's a Mpie Mp S-168, on KK.
If anybody got scammed with the Mpie M15, i backup my device 10 times, i have a stock rom for
How to install a genuine kernel to a MT6572 (MT6595 is fake) ?
Thanks
Hello. I also bought the phone. now we have to change the firmware. if you have the opportunity to specify where to get the firmware for this phone?
Hello all,
I recently bought an allcall rio from gearbest and like any smartphone that comes from gearbest it arrived with some bloatware (google admob) which made the phone terribly slow. Because i had some experience flashing roms on my OPO. I tried to flash a ROM that I found on allcall forum (in which they said was updated and didn't contain any bloatware). I followed their tutorial but touch became unresponsive so now I have to use an optical mouse with OTG cable in order to operate the phone. Later I tried to flash again another ROM, an older one that i found on needROM site but somehow ended having to de-solder the battery to flash "official" rom again. After flashing this last ROM, I was able to use the phone (with optical mouse only) and applied the OTA update available hoping that would solve the touch problem, but it didn't.
This is a MT6580A based phone, with android 7.0.
Appreciate any help
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
NMPG said:
Hello all,
allcall rio MT6580A based phone, with android 7.0.
Appreciate any help
Click to expand...
Click to collapse
Hi this is for sure firmware problem so try this one to flush but before that Wipe cache partition from recovery .
http://www.mediafire.com/file/cks7q7saekoosc0/AllCall_Rio_MT6580_20170808_7.0.zip
Good luck
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
G_0phy said:
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
Click to expand...
Click to collapse
Also you can try with another firmware :
http://www.mediafire.com/file/fm6wto42klr4w4d/AllCall_S1_MT6580_20180817_8.1.0.zip
Good Luck
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
I also flashed Teddy Lo ROM with success, but with same result, everything boots fine but still no touch screen... I think I may have messed up the partitions... maybe something persists on some dark corner of phone that doesn't allow to overwrite when flashing new ROMs to get LCD and touch screen drivers...
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
nkomarn said:
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
Click to expand...
Click to collapse
I flashed almost every allcall rio mt6580 ROMs I could find out there with the same result... Don't know what to do anymore
Teddy Lo said:
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
Click to expand...
Click to collapse
No, it's MT6580, phone works, even touchscreen works (talking about S1 X) but LCD drivers are different...
bought this iphone 8 plus clone and well i had problems with language, it's all in chinese. so i started experimenting and now i messed the phone up to the point where only thing i can do is flash it using flashtool
Info i have:
Cpu MTK6582
1GB RAM
Android 4.4
Baseband v: MOLY.WR8.W1431.MD.TG.SP.V1
Step 1: Download and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Illia73 said:
Hi, Thanks Ramiki for your response.
The firmware that you put a link for me is iPhone 8 clone, but my device is iPhone 8 plus clone, in addition, the one that you mentioned is mt6580, mine is mt6582. are there any differences between them for flashing firmware?
Click to expand...
Click to collapse
Sorry sorry :| My fault. Clone Iphone 8 Plus S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
ramiki said:
Step 1: and extract the iPhone 8 plus Clone stock firmware on your computer.
Step 2: After extracting, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install USB Driver on your Computer
STEP 4 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 5: In the Download Tab, you should click on the scatter-loading button
STEP 6 : After that Locate the scatter file
After that connect your device to your computer using a USB cable. Then The flashing will begin automatically
Click to expand...
Click to collapse
ramiki said:
Sorry sorry :| My fault. Clone S209_8P_H_EN_V0.2.5
is this goophone or original copy of iphone?
they Dont mention whether rom is mt6580 or 6582. so try
Click to expand...
Click to collapse
It's original copy of iPhone. thanks a million Ramiki
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
redmachodevil said:
The firmware posted above by Ramiki was for a version running the MT6580 chip and NOT the MT6582 Chip. Can someone please be kind enough to post the CORRECT firmware or to explain how to modify the one posted above to successfully load?
Click to expand...
Click to collapse
please I have the same problem with you can you help me with flash for i phone 8 plus chip mtk 6582?
use this firmware will solve your problem
https://drive.google.com/uc?id=1qK5zLQOPHmUPn4drni57A3W4_HDu85N9&export=download
Illia73 said:
Afrer I installed the firmware for iPhone 8 plus clone, it shows black screen but it works, I see nothing just some sounds and touches which means it's working. I also tried volume down + power key, and any other keys to wipe data but nothing changed. and then also redownloaded my backup firmware, and again nothing changed. it doesn't even show logo screen. what should I do?
Click to expand...
Click to collapse
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Need Help : Correct Firmware
MuhammadJihad said:
I flashed my iphone 8 clone with a firmware 7.0 , the screen went black . any help plz?
Click to expand...
Click to collapse
Hi
kindly help the same problem with me i have flashed my device with wrong firmware got from various sites hence device screen got black but its working i think there is any LCD Driver issue, now i am unable to find correct firmware for my device even i have tried around 15-20 different different flash files but not working. please help me to get it back. i have taken snapshot of device info before it got bricked, please have below details and help me please.
Brand : iphone8
Model : MN4A2ZPA
Android : 5.1
Kernel Version : Linux version 3.10.72 ([email protected]) (gcc version 4.8 (GCC) #1 SMP PREEMPT Wed jan 17 18:19:09 CST 2018
CPU : MT6580M
Resolution : 960 x 540
RAM : 512MB
ROM : 2GB
please provide if anybody have correct firmware
Great.
But we need the password to unzip the file
Could you...?
Thank you
Needed firmware iphone 8 plus clone a match
I can't run flashing because it's type not match.
I have type firmware code-516 while the target need type code-519.., Where I get the type please help me?
Hi,
I have an Iphone 8 clone (mt6582) that had a very laggy ios inteface so i flashed another ROM and lost radio signal (unknon baseband).
So i found after lots of reasearch 2 roms:
- 1st one had a working baseband but no ios UI and a little laggy(not as much as original one)
- 2nd one has an IOS 10 fluid interface but no radio
I tried to make a copy of NVRAM from 1st one using diferent tehnique to put it on 2nd rom but didn't worked,
Can anyone help me please?
I have to mention the original firmware was reporting:
-IOS 11.2.6 (15D100)
- Model: MNRJ2CH/A
-the MTK Droid Tools were reporting that inside the kernel was modified the info to show MT6589 instead of MT6582
build data was 2015/05/15 (i saw couple of clones with this date)