Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Why not Zip FIle?
Myrmid0n said:
Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Click to expand...
Click to collapse
\
Why cant you install through Zip File??
Search for the file on d-h.st and install it!!
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?[/QUOTE]
Myrmid0n said:
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
Click to expand...
Click to collapse
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Myrmid0n said:
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Click to expand...
Click to collapse
Hmm.
Add solved to your thread then
Sent from my GT-I9100 using Tapatalk 2
same problem here ... i also got error like this ...
Related
Hi, after trying out some custom roms like CM9-10 and Omega my phone suddenly started rebooting. It lets me enter the PIN and starts up but after a qouple of seconds it reboots again.
The wierd part is that it autostarts after I insert the battery, but I can enter both CWM and Download mode.
I have tried enter CWM and do a wipe but phone reboots in the middle of the process, same goes when trying to flash CM9 or any other rom I have on the internal SD.
I have also tried following a Swedish guide to restore it to stock using Odin, but after adding the PDA and pressing start I get a Fail in Odin to, something about NAND write fails.
Does anyone have a solution for me? Should I tick re-partition or do something other in Odin?
I would suggest boot into recovery. Wipe Dalvik cache. Flash Rom. Wipe both caches. reboot.
Sent from my GT-I9300 using xda premium
Do you have international galaxy s3 (gt-i9300)?
jnr21 said:
Do you have international galaxy s3 (gt-i9300)?
Click to expand...
Click to collapse
Well I think so, it was sold in Sweden.
The problem is that it reboots doing most of the actions in CWM, I think I have managed to wipe Dalvik but as soon as I try to install a rom it just reboots.
I also tried rooting again using Odin 1.85 but it fails with that version too.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
burton6666 said:
Well I think so, it was sold in Sweden.
The problem is that it reboots doing most of the actions in CWM, I think I have managed to wipe Dalvik but as soon as I try to install a rom it just reboots.
I also tried rooting again using Odin 1.85 but it fails with that version too.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
If all else fails get yourself a S3 USB Jig. I bought one, funnily enough it arrived today from Hong Kong and it only cost something like 2,50€ delivered free. Then install a stock rom.
burton6666 said:
Hi, after trying out some custom roms like CM9-10 and Omega my phone suddenly started rebooting. It lets me enter the PIN and starts up but after a qouple of seconds it reboots again.
The wierd part is that it autostarts after I insert the battery, but I can enter both CWM and Download mode.
I have tried enter CWM and do a wipe but phone reboots in the middle of the process, same goes when trying to flash CM9 or any other rom I have on the internal SD.
I have also tried following a Swedish guide to restore it to stock using Odin, but after adding the PDA and pressing start I get a Fail in Odin to, something about NAND write fails.
Does anyone have a solution for me? Should I tick re-partition or do something other in Odin?
Click to expand...
Click to collapse
If your Nand is corrupt i dont think you can get out of it......99 percent of the time if you can get into download mode your good. but if you having Nand Write issues, i dont know if there is a coming back from that.
hope thats not the case and another member can shed some better light on the subject.
Nand. See posts regarding. PIT today.
jje
Sent from my GT-I9300 using xda premium
JJEgan said:
Nand. See posts regarding. PIT today.
jje
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Could you post a link to that thread? I found this one and have tried flashing some of the PIT-files but it does not work. Or should I flash some other files at the same time?
Ok, following one guide witch seams to fix my problem is that I need a 3-part firmware. Every Firmware I have downloaded contains:
boot, cache, hidden, modem, recovery, system -if I extract them one extra time. Is that right? Where should I load them in odin in that case? If not could anyone direct me to a download-page for 3-part firmwares? (I downloaded the last one from samfirmware.com)
It is very strange that the core functions kind of work as I can boot normaly into the system and even run an app if I am fast, then reboot.
Downloadmode works untill I try to flash something.
CWM works until I try to do a Wipe or flash a rom, I can wipe dalvik and some other stuff, but not cache, data and some other. I noticed that You could partition sdcard from CWM should I try that? and if so what should i select in the next screen about partition size?
Hi guys, forgive me about my bad english but i'm not english....ok, let's start with my problem.
Today i want to clean my gs3 because i want to make it return to standard condition (i had a 4.2.2 rom). So i follow a guide of an italian android forum (yes i'm italian) to make a deep clean. The problem is now, when i try to flash a stock rom with odin. I put the phone in download mode (in the counter i have only 2), odin recognize it and i press start, but the process stop and says this
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
the nand write fail, i think. I've tried a lot of thing, such as change pc or change cable, but always the same error. At least i try with the pit procedure, but always the same error. I can only enter in download mode rigght now, and when i swich on the phone normally it says "firmware upgrade encoutered an issue, Plese select recovery mode in Kies and try again.
I try the way by kies, but it didn't recognise the phone.
Plese, help me, i'm desperate....
what phone model? what file
Glebun said:
what phone model? what file
Click to expand...
Click to collapse
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
trasposone said:
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
Click to expand...
Click to collapse
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
you can't bump your thread more than once every 24 hours, it's against the rules.
if you flashed a pit file, you need to send it to ser
trasposone said:
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
Click to expand...
Click to collapse
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
slaphead20 said:
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
Click to expand...
Click to collapse
As well as slappy's suggestion, also post what it says for 'product name' when in download mode (if you can boot into download mode)..
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Otamoe said:
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Click to expand...
Click to collapse
First of all READ. As everybody is saying Ok first question, when You go download mode can you see model name - 9300GT ? If so that means everygthing is solveable.
Next you have messed something and You need to step by step check it. If You want to still work on CM11 you need to flash CF-Root-SGS3-v6.4 to make sure that on the level of recovery everything is ok.
http://forum.xda-developers.com/showpost.php?p=27049380&nocache=1&z=1947389626875519
Than try to flash again Your ROM. We will see where this will bring You.
Thx for reply. So i can see model name in download mode GT-9300 and as you said i try to flash that kernel...
odin said:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
When I used to be having such problem I was trying to chaoticlly flash everything. Now I can say that this was stupid. Every sytuation is diffrent but some are simmiliar.
Try this topic at least You will be having stock rom with fully func. S3 If it helps you than you will go with Custom ROM otherwise>>> Root and than ROM.
http://forum.xda-developers.com/showthread.php?t=2563562
If this will not solve the problem we will see other oppurtunities.
I cannot flash anything with odin.. when i try so odin stays forever like this:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Gate11 said:
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Click to expand...
Click to collapse
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
exonerare said:
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
Click to expand...
Click to collapse
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Gate11 said:
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Click to expand...
Click to collapse
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
exonerare said:
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
Click to expand...
Click to collapse
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Gate11 said:
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Click to expand...
Click to collapse
Follow this video https://www.youtube.com/watch?v=4NMTWvXQPjk
Read the description.
Good Luck.
exonerare said:
Follow this video
Read the description.
Good Luck.
Click to expand...
Click to collapse
That's what I was doing actually, i'm trying to download a new ROM now.
doesn't work, any other idea please?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
rp158 said:
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
Click to expand...
Click to collapse
The links are dead :/
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
rp158 said:
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
Click to expand...
Click to collapse
I know me.ga but the files were deleted.
@Gate11, shame, then take this german site to download or search by yourself.
hey guys,
I don't have a recovery mode (getting white screen instead). only download mode.
I downloaded the correct firmware and tried install and it failed (in system.img) and requested a PIT file.
I downloaded the PIT file and it got failed again.. I tried to install this twrp thing and still not good.
This is what I get when I try to install pit + twrp (auto reboot, re-partition and f. reset time are checked):
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
Edit:
I've tried with the nand checked aswell and got this:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea?
Thank you guys!
Have you tried different cables, are you using a USB port on the motherboard?.
The drivers work because it sees the phone in odin.
Are you loading the stock firmware AND the pit file at the same time?.
If you can answer yes to all of those then it's a bin job.
I don't recommend trying to flash a pit and TWRP at the same time. I only recommend using a pit file, when necessary, with stock firmware.
shivadow said:
Have you tried different cables, are you using a USB port on the motherboard?.
The drivers work because it sees the phone in odin.
Are you loading the stock firmware AND the pit file at the same time?.
If you can answer yes to all of those then it's a bin job.
Click to expand...
Click to collapse
Yes, tried a different cable.
Yes, I used a USB port on the motherboard
Yes it's a stock, and tried separately and didn't work.
Damn
audit13 said:
I don't recommend trying to flash a pit and TWRP at the same time. I only recommend using a pit file, when necessary, with stock firmware.
Click to expand...
Click to collapse
I tried to use only the pit but all i get is that error. It didn't matter if I used a TWRP / stock firmware.
Don't flash using only the pit file.
Flash twrp or stock ROM without pit.
If flashing the stock firmware on its own fails or it says about a pit partition in odin then load both the pit file and the stock firmware at the same time. If it fails to flash them you can safely assume the phone has a corrupt nand and is dead.
You can also try flashing older versions of the recovery, twrp or cwmr. The last official cwmr was the most stable for me and helped me recover from a f*ked twrp that caused the e:failed to mount errors.
If it can take a flash of any type it might be recoverable. Just because it fails a flash doesn't mean its dead dead, just borked beyond the usual capability of the average Joe bloggs..
I would recommend, just for the fact it can't get any worse than what it already is, find the stock firmware in separate files along with the last official cwmr and flash them one by one and when you get the fail errors you'll know exactly what part of the nand is faulty. Basically just mess with it until you kill it. If it jumps into life in the meanwhile then you got lucky and should put a ticket on the lottery!.
Hope this helps inspire a bit of confidence!.
audit13 said:
Don't flash using only the pit file.
Flash twrp or stock ROM without pit.
Click to expand...
Click to collapse
I tried it, didn't manage to succeed.
shivadow said:
If flashing the stock firmware on its own fails or it says about a pit partition in odin then load both the pit file and the stock firmware at the same time. If it fails to flash them you can safely assume the phone has a corrupt nand and is dead.
You can also try flashing older versions of the recovery, twrp or cwmr. The last official cwmr was the most stable for me and helped me recover from a f*ked twrp that caused the e:failed to mount errors.
If it can take a flash of any type it might be recoverable. Just because it fails a flash doesn't mean its dead dead, just borked beyond the usual capability of the average Joe bloggs..
I would recommend, just for the fact it can't get any worse than what it already is, find the stock firmware in separate files along with the last official cwmr and flash them one by one and when you get the fail errors you'll know exactly what part of the nand is faulty. Basically just mess with it until you kill it. If it jumps into life in the meanwhile then you got lucky and should put a ticket on the lottery!.
Hope this helps inspire a bit of confidence!.
Click to expand...
Click to collapse
Hahaha thanks mate, I guess I'll just give up and deliver this phone the place it belongs - hell!
Thanks for the help tho, It will be easier to win the lottery as you wrote