hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
hoenens said:
hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
Click to expand...
Click to collapse
Almost every kernel dev provides a .tar version of his kernel for initial rooting / custom recovery install.
Per example apolo, gustavo and dorimanx.
Grab one of these, flash trough Odin and start from there.
Hint, you need at least CWM 6.0.45 for installing cm11.
Regards.
Tapatalked from my Galaxy SII
Y u no guys read op?
Imo if u read u will be safe.
It has been said several times that u need latest cwm for installing kitkat.
Sent from my GT-I9100 using Tapatalk 2
Where to get this latest version of CMW?
hoenens said:
Where to get this latest version of CMW?
Click to expand...
Click to collapse
Flash any cm10.2 rom
Sent from my GT-I9100 using Tapatalk 2
Fixed!
Ok,, i don't know how i did it.. but i got it fixd now i have the latest nighly installed without anyproblem
hoenens said:
Ok,, i don't know how i did it.. but i got it fixd now i have the latest nighly installed without anyproblem
Click to expand...
Click to collapse
Good! Now please add [SOLVED] in your title and spell Status right please
Related
Tell me how to install the Siyah Kernel the right way..... i have tried it 3 times already it gives me a unfortunately the process com.android.phone has stopped on boot... evrytime so i had to reinstall my rom which is the CM 10.1 and Gapps. and reset factory thingie ervything it jus wont work Could Someone PLease give me a link which is for my version of phone ... and tell me how exactly to install it.. i just use cclockworkmod thing and flash the zip from int storage.. i got the Sgs2 version from the offical website of Siyah :C pls somebody help..
leondestiny said:
Tell me how to install the Siyah Kernel the right way..... i have tried it 3 times already it gives me a unfortunately the process com.android.phone has stopped on boot... evrytime so i had to reinstall my rom which is the CM 10.1 and Gapps. and reset factory thingie ervything it jus wont work Could Someone PLease give me a link which is for my version of phone ... and tell me how exactly to install it.. i just use cclockworkmod thing and flash the zip from int storage.. i got the Sgs2 version from the offical website of Siyah :C pls somebody help..
Click to expand...
Click to collapse
The version you are trying to flash does not support cm10.1...you have to flash siyah vsync patched version..download and install the v5 from here http://sourceforge.net/projects/cm10i9100vsync/files/kernel/
pasanjay said:
The version you are trying to flash does not support cm10.1...you have to flash siyah vsync patched version..download and install the v5 from here http://sourceforge.net/projects/cm10i9100vsync/files/kernel/
Click to expand...
Click to collapse
omg thank u so much man it worked *___* it feels so much faster now x'D THank You Very much !!!! ))
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
machokingjim said:
Guys I am using a Samsung galaxy s2 gt i9100 running jelly bean 4.1.2 stock xwlst firmware and i rooted my phone using the one click root using exploits. I am all new to this rooting process and so i installed titanium backup and i was trying to remove playstore inorder to install modded play store and all of a sudden my device rebooted and now its stuck with the boot screen. So i tried to flash canogenmod 10.2 for the first time and used clock work mod recovery. I wiped my memory cleared the cache(couldnt find dalvik cache and the advanced menu either) and applied the latest cyanogen mod 20130827 from the cyanogenmod.org using my external sdcard. It displayed assert failed )==gti9100t status 7 error. I can assure you that i downloaded the international version of the cyanogenmod and not any other variant. Kindly help me with a solution or a link to the correct cyanogenmod rom package. Thank you. Looking forward to an earlier response sorry if i had posted in a wrong section. i am new to the forum
Click to expand...
Click to collapse
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Laurentiu27 said:
ok donw get worry u have to update cwmr to the latest version so u dont get that annoing 7 error
btw i succeded instal cyanogen and omega with twrp...allso got 7 error on cyanogen mod with cwmr
Click to expand...
Click to collapse
so it doesnt matter what type of kernel we are using??
and now i tried flashing a paranoid rom and it is returning E:signature verification failed. please help me with something. Thank you
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Cornhelius said:
the kernel will flash with new ROM so the old kernel isn't important, it's delete in flash process.
I've the same problem whit cwmr6, but using cwmr 5.5 it seems resolved.
Click to expand...
Click to collapse
so what can i do for now to gain my access to the phone? It doesnt show me anything except for the boot screen.
problem solved
hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
hoenens said:
hey guys,
Well i wanted to install CM 11 nightly ( also tried snapshot cm11), but when it was preparing to install it came up with an Status 7 error.
I have tried to intall it fo over 8 timesnow.
Als what happend, when i get the error and then reboot the phone, i only can get back into CMW and not into the android version intalld on it, so i installed stock android back to t and tired and tried and tied again... .
But i canot find an fix it ..
I am trying to root the Phone now,, and guess what.. i cannot get it rooted... HELP!?
Can someone help me please to fix this poblem?
Click to expand...
Click to collapse
U cant root it by autoroot file from chain fire I think u can reroot by that by properly following instructions. .and about cm11 problem u have to have latest cmw or philz recovery. .again u can download it via odin or yr existing recovery(zip file) or odin(tar)...
Sent from my GT-I9300 using xda app-developers app
Ok,, so how do I can root it?
Because telleing how it's not been done won't help me now.
I realy aprieciate your reply but this is not helping me atm haha.
Can you also tell me where I can find the right file to root my device and where to get that LATSEST version of WMC?
hoenens said:
Ok,, so how do I can root it?
Because telleing how it's not been done won't help me now.
I realy aprieciate your reply but this is not helping me atm haha.
Can you also tell me where I can find the right file to root my device and where to get that LATSEST version of WMC?
Click to expand...
Click to collapse
Just flash a supersu zip file in recovery...Just Google it...latest is 1.86 I guess. ..
Sent from my GT-I9300 using xda app-developers app
Hey if you flashed fix permission emulator then you havent got any problem
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
Well.. I have a problem that is: When I try to get the CM11 with CWM i got Error (Status 7) but managed to fix it by deleting the very first line in the updater-script.
Now I start to get Error (Status 6) and I don't know why.
I have the lastest Recovery and Im trying to flash the lastest SNAPSHOT edition of CM11.
Thanks in advance.
Brokenn said:
Well.. I have a problem that is: When I try to get the CM11 with CWM i got Error (Status 7) but managed to fix it by deleting the very first line in the updater-script.
Now I start to get Error (Status 6) and I don't know why.
I have the lastest Recovery and Im trying to flash the lastest SNAPSHOT edition of CM11.
Thanks in advance.
Click to expand...
Click to collapse
Status 7 is normally caused by the updater script and can be solved by using latest cwm recovery or try Twrp or PhilZ recovery.
tallman43 said:
Status 7 is normally caused by the updater script and can be solved by using latest cwm recovery or try Twrp or PhilZ recovery.
Click to expand...
Click to collapse
Okay, thanks. I thought about using TWRP, but PhilZ Recovery.. I'll try it.
Just fixed my phone because I bricked it again and I literally have no idea how. (Most probably one of the common S3 bugs)
And about the CWM version, I had the lastest one but as I said above, I'll try the other 2.
Nevermind, it gives me the Status 7 on PhilZ too..
Brokenn said:
Nevermind, it gives me the Status 7 on PhilZ too..
Click to expand...
Click to collapse
Stupid question I know but are you flashing the right Cm11 version for your phone?
tallman43 said:
Stupid question I know but are you flashing the right Cm11 version for your phone?
Click to expand...
Click to collapse
Im pretty sure its the right version, btw I get the Status 7 when I try to flash Hypermax v9 too..
Brokenn said:
Im pretty sure its the right version, btw I get the Status 7 when I try to flash Hypermax v9 too..
Click to expand...
Click to collapse
Mmm. What model phone have you got?
tallman43 said:
Mmm. What model phone have you got?
Click to expand...
Click to collapse
The i9300 (International) one.
Brokenn said:
The i9300 (International) one.
Click to expand...
Click to collapse
OK lol just checking give twrp a try and also look at this >> http://forum.xda-developers.com/showthread.php?t=2302599 <<
"Noob friendly ways.." That gave me a good chuckle..
Well, Ill try TWRP tomorrow. Ill let you know if it worked. Anyway, Ive done the deletion of "assert();",didnt work, im sure its the right version and its even the Snapshot edition so even less chances its from them.
No better.. Ive checked and I have the codename for it as "m0", I had the lastest versions of these Recoveries and the right versions for CM11 and Hypermax, still no clue why it doesnt work..
Ill reinstall my PC and Ill try the Windows Installer for CM11 maybe it'll work, too bad its a hassle to try that installer on XP (since Im using a pretty old laptop with XP and Linux atm)
Ill let u know about everything releated to this since there might be others with the same problem.
This was the second time I tried flashing a ROM but I get to learn things fast since Im very experienced with IT releated stuff
tnx for info
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
andreyus said:
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
Click to expand...
Click to collapse
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
andreyus said:
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
Click to expand...
Click to collapse
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
tallman43 said:
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
Click to expand...
Click to collapse
ive tried that for lots of times , so now im using this cm10.2 its working fine but i want to try a custom rom
anyway thanks for help mate
The recovery version must be the culprit. Why dont you install twrp from playstore? There's an app called TWTP manager. After installing twrp dont let the app reboot for you. Reboot it first then reboot into recovery the second time. Then try to install another rom
Sent from my SM-N910T using XDA Free mobile app