Hi , I have No.1 S6 .Today I installed rom liors v2.0.5 and the finite installation I can not run the phone. I change check that all file's checked and i no uncheck the preloader.Lights up red LED on the right.In device manager this fone connected as MTK USB PORT. SP FLASH TOOL is error 4032 and 4001 .My phone is brick? I FLASH WRONG PRELOADER;(( sorry for my english.
How unbrick with test point???
spec:
Unlock Phones:Yes
Model Number:S6
Touch Screen Type:Capacitive Screen
Item Condition:New
SIM Card Quantityual SIM Cards
Band Mode:2SIM/Dual-Bands
RAM:1G
CPU:Quad Core
Battery Capacity(mAh):2600mah
Size:136.6x69.8x7.9mm
ROM:4G
Display Size:5.0
Operation System:Android
Feature:GPS Navigation,Email,FM Radio,MP3 Playback,Touchscreen,QWERTY Keyboard,Bluetooth,Wi-Fi,Memory Card Slots,Video Player,TV Receive,Message
Design:Bar
Camera:13.0MP
CPU Manufacturer:MTK 6589
Display Resolution:1280x720
Thickness:Ultra Slim(<9mm)
Camera Type:Front & Back Camera
Cellular:GSM/WCDMA
Screen LCD Type:IPS
Language:English
Display Color:Color
Color:Black
Battery Typeetachable
Talk Time:4-5 hours
Brand Name:no1
Unlock Phones:Yes
Related
hi all ,
i have bought a phone to a website from china but have a problem with the phone , when start i cant do anything have a message said me " launche application crashed " and always have this message i cant go to settings for reset , i have do factory mode and do a card flash , have reset but not repair my problem after many research not find the real name to the phone for repair this i just said is a : ALPS I9200 have MTK6575 CPU and 512mb of ram and 152mo of rom is single sim card and android 4.0.3
i have take picture for show you , thank you for your help , sorry for my english if is bad iam french .
Hello,
Somehow i've bricked my Cosmo K9190 S4 mini clone MTK6572. The Smart Phone Flash Tool isn't recognise the device as MTK Vcomxxx. The phone appears and disappears in the network adapters devices as: alcatel single rndis interface #3.
Do i reaminate this phone?
Thanks,
Device : Acer Liquid Z320 (model no. T012) Android 5.1.1
So my friends device got bootloop after he install something that he can't explained (maybe something like luckypatcher / incompability xposed installer etc). Now after flash to it's stock from this site (vache-andr*id[dot]com) with firmware file Acer_AV0L0_T012_1.005.00_PA_GEN1 the device boot up and run nicely, but the problem at it's network. He can only connect to 2G (or EDGE if you will), and when i change it to 3G only the signal lost / no service / empty bar with " ! " symbol in the middle of network bar. I have check all the error like null imei etc but no error i have found so far. Here is what status has show on my device @3G Only :
Service state :
XL Axiata: out of service
IMEI1: (same as at the devices box)
IMEI2: (same as at the devices box)
for dev who want to get my logcat i have provide the file in the attachment. Please i'm really really depressed for working this device almost 14 hour's and have no clue for fixing it. I have try flashing NON-HLOS.bin file from it's firmware file via fastboot (after i unlock the bootloader with " fastboot oem unlock " command) but still same error. i double check the imei and it's still same as it writen on device's box (both first and second imei). I google up but all the repair tool is only for Mediatek which the device i have working on it is Qualcomm so i don't want to broke the device too far and keep searching another way.
hi all
I have allready bought brand new Blackview P10000 pro smartphone.
It was on oreo 8.1, and I wanted to downgrade to 7.1, get stock firmware, flashed it by SP Flash Tool, and now I have two problems:
1) No active SIM ports - I tryied to put IMEIs by Engeenering mode, but there is no CDS Info menu, so tryied Maui META, but my P10000 can't connect to this program...
2) at the right-top corner there is a text message: '未写入key' which mean 'not written key'. How to turn this off? It dissapears when I kill all of the proccess, but I still don't know which apk it is.
Most important is SIM problem for sure...
Can anybody help?
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Yunyhx said:
Hello to the community,
I need urgent help with my P Smart 2019 (POT-LX1). Briefly some info, have the P Smart 2019 cheap auctioned as defective with software error. The previous owner said he had tried a board software / flash file (.xml) to flash unfortunately he no longer knows which it was exactly.
After that, the P smart 2019 no longer started and it is displayed a different boot logo (Huawei Ascend) he has then started several attempts with different firmware (dload) and (.xml) all without proper success. P smart 2019 now starts again but as boot logo is still Huawei Ascend and the firmware seems to be only a board dignose firmware. In Settings --> System --> About Phone is no model ( unknown )
Device name "PAN
Build number "POT-LX1-BD 1.0.0.53
EMUI version 5.0
Android version 7.0
IMEI 00000000000000
CPU - Octa-Core 1.8Ghz
Ram - 2GB
internal storage 11GB free /16GB total (but should be 64GB)
what or which firmware / board software do I have to flash that everything is recognized correctly again and the correct boot logo is displayed?
that should be feasible... I hope. I am familiar with the process of Test Point flash only I do not see through the whole firmware and board software at Huawei more... POT-LX1 or POT-L21 then the various board flash file (.xml).
EDIT: the eRecovery language is chinese!
Would be more than grateful if someone could help me there times something. despair slowly.
please excuse my bad english.
LG and thanks
Click to expand...
Click to collapse
Nobody any Idea?