Finally, I registered today and this is my first post!
I have read this forum for some time and searched not only this forum but googled but couldn't find clear answers for my questions on the BeanStalk ROM which I love so much. I have tried bunch of other ROMs but none of them satisfied me in terms of stability.
Here are issues of the Beanstalk ROM on my Galaxy Note (Telus) and questions.
4.3 (tested latest few builds)
1. With turnning off most of options such as phone, data, wifi, NFC (annoying, default should be disabled for me), the battery life is good
2. Under the battery usage graph, Awake is off when it is supposed to be for example at night in sleep setting as mentioned above.
3. Sometimes, the screen won’t turn off automatically after set time-out, for example 1min, and even with the power button. Reboot or reboot in recovery mode doesn't help. This happened this afternoon at work and had to power off until coming back home to re-flash. Does anyone knows why this happens and how to fix it?
4.4 (tested latest few builds)
1. I also tried to turn off all the communications and wake up settings (same as I have done with 4.3), but couldn't make the Awake bar in the Battery graph off. Something seems to keep waking the phone. Couldn't find what it was so far. Any idea?
2. Well, this is known issue, but the video recording doesn’t work. The latest build released yesterday seems to find a work around with Camera MX though.
If the 'Awake' issue can be fixed, I would be happy with 4.4.
I'm not a big fan of NFC and looks to me just a battery drainer, but it keeps turnning back on after uncheck. One tip to fix this (bad) behavior I found somewhere in this forum was to uncheck and without leaving the setting screen and reboot using power button.
Hope someone can answer my questions.
Thanks.
Stock Video Camera patch by polluti0n
jeonlab said:
Finally, I registered today and this is my first post!
I have read this forum for some time and searched not only this forum but googled but couldn't find clear answers for my questions on the BeanStalk ROM which I love so much. I have tried bunch of other ROMs but none of them satisfied me in terms of stability.
Here are issues of the Beanstalk ROM on my Galaxy Note (Telus) and questions.
4.3 (tested latest few builds)
1. With turnning off most of options such as phone, data, wifi, NFC (annoying, default should be disabled for me), the battery life is good
2. Under the battery usage graph, Awake is off when it is supposed to be for example at night in sleep setting as mentioned above.
3. Sometimes, the screen won’t turn off automatically after set time-out, for example 1min, and even with the power button. Reboot or reboot in recovery mode doesn't help. This happened this afternoon at work and had to power off until coming back home to re-flash. Does anyone knows why this happens and how to fix it?
4.4 (tested latest few builds)
1. I also tried to turn off all the communications and wake up settings (same as I have done with 4.3), but couldn't make the Awake bar in the Battery graph off. Something seems to keep waking the phone. Couldn't find what it was so far. Any idea?
2. Well, this is known issue, but the video recording doesn’t work. The latest build released yesterday seems to find a work around with Camera MX though.
If the 'Awake' issue can be fixed, I would be happy with 4.4.
I'm not a big fan of NFC and looks to me just a battery drainer, but it keeps turnning back on after uncheck. One tip to fix this (bad) behavior I found somewhere in this forum was to uncheck and without leaving the setting screen and reboot using power button.
Hope someone can answer my questions.
Thanks.
Click to expand...
Click to collapse
In the beanstalk developing thread there's a patch by polluti0n fixing issues with the stock camera.
http://forum.xda-developers.com/showthread.php?t=2535857&highlight=video+recording+patch&page=61
I see it's late since you've asked but I'm new here myself and while looking for answers to some questions I had I saw your thread, so hope it helps.
wavv.drama said:
In the beanstalk developing thread there's a patch by polluti0n fixing issues with the stock camera.
http://forum.xda-developers.com/showthread.php?t=2535857&highlight=video+recording+patch&page=61
I see it's late since you've asked but I'm new here myself and while looking for answers to some questions I had I saw your thread, so hope it helps.
Click to expand...
Click to collapse
Thank you for your reply. Since I posted these questions, there were few times of Beanstalk ROM updates and now my phone is very stable. I'm very happy with the last build. I'm also using polluti0n's patch for the video issue. Since I updated the build on 3/7, there has not been a single reboot. So far soooo good. As a new member with less than 10 posts, I can't post any reply and thank Patch Adams for his great work. I could just click the Thank button.
Thank you.
jeonlab said:
Thank you for your reply. Since I posted these questions, there were few times of Beanstalk ROM updates and now my phone is very stable. I'm very happy with the last build. I'm also using polluti0n's patch for the video issue. Since I updated the build on 3/7, there has not been a single reboot. So far soooo good. As a new member with less than 10 posts, I can't post any reply and thank Patch Adams for his great work. I could just click the Thank button.
Thank you.
Click to expand...
Click to collapse
Glad to see that more and more people are following the patch's thread with beanstalk for the i717, and also glad to hear your phone is working fine. I also suffer from the junior member restriction so I read and try and see what I can do to follow quietly but see if eventually could be of some help. As a kind of fyi you might wanna see what I believe they might work on from the most recent comments in the beanstalk i717 thread:
galaxys2root.com/galaxy-s2-roms/beanstalk-rom-with-android-4-4-2-for-galaxy-s2-gt-i9100sgh-t989
I found this while trying to find beanstalk for a friend who has an S2 T989 and realized that the version they have there is using diablo kernel rather than CM or PAC.. from the time I had to play around with it while I flashed it on my friends S2 it seems to be very smooth, like the one patch built for the i717. Pollution was mentioning something about maybe using diablo on the next build, so we'll see if it happens. Also, although totally unrelated I realized that the version used on the link above from galaxys2root is slightly more advanced build-wise than the version here.
Enjoy your day!
wavv.drama said:
Glad to see that more and more people are following the patch's thread with beanstalk for the i717, and also glad to hear your phone is working fine. I also suffer from the junior member restriction so I read and try and see what I can do to follow quietly but see if eventually could be of some help. As a kind of fyi you might wanna see what I believe they might work on from the most recent comments in the beanstalk i717 thread:
galaxys2root.com/galaxy-s2-roms/beanstalk-rom-with-android-4-4-2-for-galaxy-s2-gt-i9100sgh-t989
I found this while trying to find beanstalk for a friend who has an S2 T989 and realized that the version they have there is using diablo kernel rather than CM or PAC.. from the time I had to play around with it while I flashed it on my friends S2 it seems to be very smooth, like the one patch built for the i717. Pollution was mentioning something about maybe using diablo on the next build, so we'll see if it happens. Also, although totally unrelated I realized that the version used on the link above from galaxys2root is slightly more advanced build-wise than the version here.
Enjoy your day!
Click to expand...
Click to collapse
Thank you for your reply. I'm also glad to see more people who has i717 are interested in Beanstalk ROM. I have flashed so many ROMs for far whenever it gives me an error or reboots but Beanstalk is the longest one I'm using right now. I also expecting better versions with the new builds with diablo kernal or the updated CM (hopefully with video recording).
Cheers!
Camera MX
jeonlab said:
Finally, I registered today and this is my first post!
I have read this forum for some time and searched not only this forum but googled but couldn't find clear answers for my questions on the BeanStalk ROM which I love so much. I have tried bunch of other ROMs but none of them satisfied me in terms of stability.
Here are issues of the Beanstalk ROM on my Galaxy Note (Telus) and questions.
4.3 (tested latest few builds)
1. With turnning off most of options such as phone, data, wifi, NFC (annoying, default should be disabled for me), the battery life is good
2. Under the battery usage graph, Awake is off when it is supposed to be for example at night in sleep setting as mentioned above.
3. Sometimes, the screen won’t turn off automatically after set time-out, for example 1min, and even with the power button. Reboot or reboot in recovery mode doesn't help. This happened this afternoon at work and had to power off until coming back home to re-flash. Does anyone knows why this happens and how to fix it?
4.4 (tested latest few builds)
1. I also tried to turn off all the communications and wake up settings (same as I have done with 4.3), but couldn't make the Awake bar in the Battery graph off. Something seems to keep waking the phone. Couldn't find what it was so far. Any idea?
2. Well, this is known issue, but the video recording doesn’t work. The latest build released yesterday seems to find a work around with Camera MX though.
If the 'Awake' issue can be fixed, I would be happy with 4.4.
I'm not a big fan of NFC and looks to me just a battery drainer, but it keeps turnning back on after uncheck. One tip to fix this (bad) behavior I found somewhere in this forum was to uncheck and without leaving the setting screen and reboot using power button.
Hope someone can answer my questions.
Thanks.
Click to expand...
Click to collapse
Hi! So the last thing you want to see is a reply saying I have the same issues. I was wondering what Camera MX is? My phone will not record on BS either along with youtube and any other video unable to play. It just keeps loading until it gives up. I noticed you hadn't listed youtube videos as a problem. Did you find a fix for it? Ill post back if I find anything.
Rookybounce said:
Hi! So the last thing you want to see is a reply saying I have the same issues. I was wondering what Camera MX is? My phone will not record on BS either along with youtube and any other video unable to play. It just keeps loading until it gives up. I noticed you hadn't listed youtube videos as a problem. Did you find a fix for it? Ill post back if I find anything.
Click to expand...
Click to collapse
Currently, I have the latest Beanstalk ROM 4.4.4 (7/11 version) with polluti0n camera patch and the camera works fine with video recording. :good:
Related
First off here is my info:
Phone: AT&T Samsung Galaxy Note i717
ROM: Cyanogenmod 10 quincyatt nightly build 12/23 (in attempt to remedy my problem)
Using this guide http://forum.xda-developers.com/showthread.php?t=1958944&highlight=install+cyanogenmod in installed the 11//14 stable build initially without too much trouble.
I did find right away that I was unable to locate any camera application or any way to access it other than the lockscreen shortcut.
When I attempted to use the shortcut from the lockscreen it simply does nothing. It doesn't crash my phone, but it also does not open my camera.
I also tried installing a couple of camera applications from the play store and they start up, but the camera never activates.
This problem persisted even when I upgraded to todays nightly build 12/23, also so far I have noticed no new problems with this build as opposed to the 11/14 stable build.
I have searched for a solution for this problem in the forums, and perhaps I missed something, if that is the case then please direct me to the proper thread.
I tried posting this in the development section only to find out that I am unable to (I've been using this site for a while but never needed to register to ask a question).
If anyone has had this problem and/or knows how to fix it I would greatly appreciate your input.
I apologize if I have left anything out, if I have then let me know and I will get back to you as soon as I can.
Edit: I updated to the 12/24 nightly build today and it appears to have resolved the camera issue right away. If anyone else is having this problem then I hope this helps.
ill give $5 to the person that fixes this.
tatzelworm said:
First off here is my info:
Phone: AT&T Samsung Galaxy Note i717
ROM: Cyanogenmod 10 quincyatt nightly build 12/23 (in attempt to remedy my problem)
Using this guide http://forum.xda-developers.com/showthread.php?t=1958944&highlight=install+cyanogenmod in installed the 11//14 stable build initially without too much trouble.
I did find right away that I was unable to locate any camera application or any way to access it other than the lockscreen shortcut.
When I attempted to use the shortcut from the lockscreen it simply does nothing. It doesn't crash my phone, but it also does not open my camera.
I also tried installing a couple of camera applications from the play store and they start up, but the camera never activates.
This problem persisted even when I upgraded to todays nightly build 12/23, also so far I have noticed no new problems with this build as opposed to the 11/14 stable build.
I have searched for a solution for this problem in the forums, and perhaps I missed something, if that is the case then please direct me to the proper thread.
I tried posting this in the development section only to find out that I am unable to (I've been using this site for a while but never needed to register to ask a question).
If anyone has had this problem and/or knows how to fix it I would greatly appreciate your input.
I apologize if I have left anything out, if I have then let me know and I will get back to you as soon as I can.
Edit: I updated to the 12/24 nightly build today and it appears to have resolved the camera issue right away. If anyone else is having this problem then I hope this helps.
Click to expand...
Click to collapse
I have the same problem.
Fixed?
James Musacchio said:
I have the same problem.
Click to expand...
Click to collapse
Well as I stated in my edit, the 12/24 nightly appears to have fixed this issue so far as i can tell. Also updated to the 12/25 nightly and the camera still works. One bad thing about this is that I have experienced more than a few reboots, but my phone starts up so fast afterwards that its a small price to pay for having my camera back.
As always, make a backup before you flash the newest nightly but I haven't seen too many problems other than the occasional crash of a couple apps and the unfortunate reoccurring crash of Apollo which is annoying.
Let me know if this fixes your issue, if it does then I'm glad I could help.
Tried CM10 nightly myself tonight, and was quite happy with it, until ....
Random reboots ....5 in 3 hours.
Camera is good, but the menu button was iffy ....
It's getting better, but I'm gonna stay with my backup for a bit longer I think ....g
12/25 is a bit sketchy
gregsarg said:
Tried CM10 nightly myself tonight, and was quite happy with it, until ....
Random reboots ....5 in 3 hours.
Camera is good, but the menu button was iffy ....
It's getting better, but I'm gonna stay with my backup for a bit longer I think ....g
Click to expand...
Click to collapse
Yeah I decided to try the 12/25 build and didn't notice any improvements from the 12/24. Ironically about an hour after my last post my phone then went into a reboot loop that I couldn't stop until I removed my battery. I had to boot into cwm recovery and then reflash the 12/24 build. So far this is the most stable nightly that allows for the camera to work without causing too many issues besides one incident I had the first day I flashed it.
I recommend people stay away from 12/25 as it was extremely unstable in my experience. I may try the 12/26 build simply because I can, but I'll definitely keep the 12/24 on hand if that fails as well.
WHEN POSTING IN THIS THREAD:
DO NOT SPAM
ONLY POST QUESTIONS YOU HAVE REGARDING ISSUES YOU DO NOT SEE IN THIS FAQ
"Q" and "A" SOLUTIONS THAT SHOULD BE INCLUDED IN THIS THREAD
ISSUES WITH CURRENT SOLUTIONS IN THIS THREAD THAT DIDN'T SOLVE A PROBLEM
OR ANY QUESTIONS YOU HAVE REGARDING CM10.1 ITSELF! I HOPE TO FILL THIS THREAD UP WITH MANY MORE Q AND A SOLUTIONS TO HELP OTHER USERS AND DECREASE UNNECESSARY POSTS IN DEVELOPER SECTIONS! IF YOU CAN CONTRIBUTE: PLEASE FEEL FREE TO DO SO!
-------------------------------------------------------------------------------------------------------
Q: I flashed CM10.1 but my GPS won't lock. Is there a solution?
A: Absolutely!
(Optional) Use TitaniumBackup to backup your apps+data
Use Recovery to Backup your current state (System, Data, Boot)
Flash a Sense ROM of any kind (I use MeanBean)
(Don't forget to do your wipes, of course)
*Once booted into a Sense ROM*
Make sure your GPS is turned ON and open up Google Maps
Wait for your GPS to lock
Reboot into Recovery and Restore your Backup
(Don't forget to do your wipes, of course)
*Once booted back onto your CM10.1*
Make sure GPS is turned ON and open up Google Maps
Your GPS should now lock.
Q: I noticed screen tearing (glitch-like symptoms) on my CM10.1. Is there a solution?
A: Absolutely!
Go into Developer Options
Scroll down to "Disable HW Overlays"
Check the box to disable
Screen tearing is now gone.
NOTE! You will need to do this on each reboot!
Q: Developer Options don't exist on my CM10.1. Is it hidden?
A: Kind of.
Go into About
Scroll all the way down and tap the build 7 times
You will notice a message saying Developer Options was unlocked.
Q: How do I get the Play Store on my CM10X?
A: You'll need to download a compatible GApps (Google Apps
You can find the latest GApps in this thread
Q: Why isn't my WiFi connecting?
A: That issue is usually caused by your router. Simply reset or unplug your router for 15 seconds and try again.
Q: I installed an AOSP kernel and my phone has been rebooting. Why is that?
A: The kernel may not be supported with your current ROM.
Some kernels have a voltage script provided by the builder. Ask the developer if there is one available.
You can also download Kernel Tuner from the Play Store to change voltage.
Q: Voltage? Kernel Tuner? What now...?
A: Within' Kernel Tuner you will want to go into Voltage and use the "All +12.5 mV" which will up the Voltage in all areas. I found that having 192MHz at 900mV will make CM10.1 plenty stable while not affecting battery life significantly. ROM and Kernel may very. Do some Trial and Error to see what is suitable for you
Q: My internal storage says I have less than I really should. Did I ruin my internal SD Card?
A: No. Don't panic.
All you need to do is Wipe your Internal Storage.
Backup your files if you don't want to lose them, of course.
Problem should be solved.
Issue usually occurs when flashing from Sense to AOSP or flashing numerous ROM's in a short period of time.
Q: Where can I find the latest Deck Builds?
A: http://forum.xda-developers.com/showthread.php?t=2110920
You can also check the iRC channel (info in the thread above)
Also, search Google for "CM10 EVO LTE irc" and click the first link
Q: Should I flash Nightly Builds or Deck's Builds?
A: Nightly Builds are official CM builds which don't include all of Deck's maintenance, tweaks, etc... You'll find that Deck's Builds just happen to be more stable.
I feel like this was a waste of time. Lol.
Bump reserve.
CM 10.1 battery life
Delakit said:
I feel like this was a waste of time. Lol.
Bump reserve.
Click to expand...
Click to collapse
I've been using CM 10.1 ever since it first came out .I love it but the only problem i got is the terrible battery life I've been experiencing .It has gotten lot worst over time now my phone barely last a couple of hours per charge.Is there any advice you can give me to get better battery life?
ive done clean and dirty installs to find a solution but still get the same result and i've never use another kernel with the ROM. The best battery life i've experience with my phone was with stock rom when i used to get 24hrs on one charge .i'm seriously thinking about going back to stock but i love CM10.1
PLEASE HELP A BROTHA OUT
hakeem0996 said:
I've been using CM 10.1 ever since it first came out .I love it but the only problem i got is the terrible battery life I've been experiencing .It has gotten lot worst over time now my phone barely last a couple of hours per charge.Is there any advice you can give me to get better battery life?
ive done clean and dirty installs to find a solution but still get the same result and i've never use another kernel with the ROM. The best battery life i've experience with my phone was with stock rom when i used to get 24hrs on one charge .i'm seriously thinking about going back to stock but i love CM10.1
PLEASE HELP A BROTHA OUT
Click to expand...
Click to collapse
That is pretty weird. I had that problem on the EVO 3D before. Were you or are you using any custom kernel, kernel tuner, or scripts at all?
I know, too, that the battery does seem to drain a bit fast at first but then it gets more subtle. MeanBean has been draining me worse than CM10.1 right now.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Delakit said:
That is pretty weird. I had that problem on the EVO 3D before. Were you or are you using any custom kernel, kernel tuner, or scripts at all?
I know, too, that the battery does seem to drain a bit fast at first but then it gets more subtle. MeanBean has been draining me worse than CM10.1 right now.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Click to expand...
Click to collapse
Im not using anything extra,just the ROM as is . Also tried MeanBean got about 5 to 6 hours on one charge but still isnt anywhere close to 24 hrs on one charge with stock ROm
hakeem0996 said:
Im not using anything extra,just the ROM as is . Also tried MeanBean got about 5 to 6 hours on one charge but still isnt anywhere close to 24 hrs on one charge with stock ROm
Click to expand...
Click to collapse
MeanBean has never treated me well on battery life no matter what I do. Not on my replacement anyway. On my other LTEvo it was working great. But... CM10.1's battery life shouldn't be that bad. Could always use Kernel Tuner to manage the CPU and Gov. a bit. Trial and error until you find a satisfied combination. I generally use Ondemand as opposed the interactive. I noticed Ondemand gave me better battery life. Haven't done much with the CPU speeds in a while so I'm not going to be too much help there... I also use System Panel to monitor apps, system, memory, and use its built-in task killer.
Delakit said:
MeanBean has never treated me well on battery life no matter what I do. Not on my replacement anyway. On my other LTEvo it was working great. But... CM10.1's battery life shouldn't be that bad. Could always use Kernel Tuner to manage the CPU and Gov. a bit. Trial and error until you find a satisfied combination. I generally use Ondemand as opposed the interactive. I noticed Ondemand gave me better battery life. Haven't done much with the CPU speeds in a while so I'm not going to be too much help there... I also use System Panel to monitor apps, system, memory, and use its built-in task killer.
Click to expand...
Click to collapse
ill give it a try.thanks
How to disable shutter sound?
In older versions of CM there used to be an option in system settings to disable the shutter sound in the camera app. I can't seem to find any options either in the camera settings or in the system settings for this in CM10.1. Anyone know if this is there or not? Or is it coming in a future version?
---------- Post added at 03:58 PM ---------- Previous post was at 03:51 PM ----------
hakeem0996 said:
ill give it a try.thanks
Click to expand...
Click to collapse
I had some trouble with apps wakelocking (for lack of a better word) when I first installed CM10.1. You can identify some of those with the wakelock detector app.
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
Thanks for putting this post together. I have always used Sense but have been wanting to try a CM10.1 ROM. This information is very helpful.
A question that I have is what bugs or issues are currently associated with CM10.1? Most of the CM10.1 ROMs under Bug List say "Any bugs currently in latest CM10.1." Is there a centralized place that lists all of the issues? Thanks.
1TonyC said:
Thanks for putting this post together. I have always used Sense but have been wanting to try a CM10.1 ROM. This information is very helpful.
A question that I have is what bugs or issues are currently associated with CM10.1? Most of the CM10.1 ROMs under Bug List say "Any bugs currently in latest CM10.1." Is there a centralized place that lists all of the issues? Thanks.
Click to expand...
Click to collapse
The only thing I noticed going wrong was my background will occasionally disappear (go black). Sometimes it will pulsate or strobe. Only happens when I sleep the phone while in Messages, and wake the phone. After unlocking, the background will either be black, be black for a while and all of the sudden pop my background image back up, or just act normal. I have no customizations or anything so I'm not sure why this occurs. Otherwise, the Vertical orientation option for the App Drawer is still messy as it always has been. That's all I've noticed but I haven't tested the music player yet .
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
nebhead said:
In older versions of CM there used to be an option in system settings to disable the shutter sound in the camera app. I can't seem to find any options either in the camera settings or in the system settings for this in CM10.1. Anyone know if this is there or not? Or is it coming in a future version?
---------- Post added at 03:58 PM ---------- Previous post was at 03:51 PM ----------
I had some trouble with apps wakelocking (for lack of a better word) when I first installed CM10.1. You can identify some of those with the wakelock detector app.
https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector
Click to expand...
Click to collapse
Power Shutter? If so, that's in the Camera app settings. Click the bottom-right screen-button and choose the bottom-center settings screen-button. I also have apps that'll randomly open when I wake the phone but I figured that was just because of the phone being in my pocket, turning on, and going to the app. It will open to the clock.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Delakit said:
Power Shutter? If so, that's in the Camera app settings. Click the bottom-right screen-button and choose the bottom-center settings screen-button. I also have apps that'll randomly open when I wake the phone but I figured that was just because of the phone being in my pocket, turning on, and going to the app. It will open to the clock.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Click to expand...
Click to collapse
Actually, not referring to Power-Shutter. I'm referring to the actual sound that is made when you take a photo. It's a bit jarring/annoying to have it "dleep!" when I take photos. Back in CM7 I remember that we could turn that sound off.
Delakit said:
I feel like this was a waste of time. Lol.
Bump reserve.
Click to expand...
Click to collapse
Any source of info or attempt to help folks that either dont know or cant figure things out on their own is never a waste of time bro. Thanks
*Information IS the most dangerous weapon of all*
nebhead said:
Actually, not referring to Power-Shutter. I'm referring to the actual sound that is made when you take a photo. It's a bit jarring/annoying to have it "dleep!" when I take photos. Back in CM7 I remember that we could turn that sound off.
Click to expand...
Click to collapse
I looked everywhere and couldn't find an option. I really don't have the time to dig further into the actual coding either, unfortunately.
Delakit said:
I looked everywhere and couldn't find an option. I really don't have the time to dig further into the actual coding either, unfortunately.
Click to expand...
Click to collapse
Thanks for trying. If anyone else knows or has time to check it would be greatly appreciated.
only issue ive been getting since the 4/13 buld and as well as the 4/16 build is my phone fcs when someone calls. really annoying. especially since not even running a kernel only stock . and have done a few full wipes and clean installs. been diving me nuts
kaos420 said:
only issue ive been getting since the 4/13 buld and as well as the 4/16 build is my phone fcs when someone calls. really annoying. especially since not even running a kernel only stock . and have done a few full wipes and clean installs. been diving me nuts
Click to expand...
Click to collapse
Odd. Never had that issue before. Bad download?
Sent from my EVO using xda app-developers app
When I flashed CM 10.1 the only thing that worked was power button and volume. The screen was unresponsive, my bootloader is unlocked and I'm s-off hboot 2.09
Sent from my EVO using xda premium
WOLF26915 said:
When I flashed CM 10.1 the only thing that worked was power button and volume. The screen was unresponsive, my bootloader is unlocked and I'm s-off hboot 2.09
Sent from my EVO using xda premium
Click to expand...
Click to collapse
And as you'll find stated numerous times: the latest touchpanel firmware isn't yet supported with most, if not all, AOSP ROM's. S-OFF, which will make you downgrade, and you'll be able to use your AOSP ROM's. And then you can update to the latest firmware minus the tp update.
... Sent from my 'Oops! Should've bought the S3!' via XDA-Developers App.
Hi xda Community,
at first - BIG THANKS TO ALL OF YOU ACTIVE CUSTOM ROM GUYS!!
With all your FAQs, Videos and postings, you made it possible - and easy - for me, to get rid of the annoying Sony ROM by rooting and installing a custom rom.
Currently I am running CM10 FXP230 on my Xperia U. I know it is not a stable version, but still a great improvement in speed for me and also the first ROM i discovered during my internet research for an alternative to the slow stock sony stuff.
However, i am facing some problems during the daily usage of my phone, perhaps one of you can support me during finding a solution for some of them.
1. Updating ROM
Pretty basic question, just need a confirmaton that i understood it the right way. I download the new Version of the custom rom (e.g.fxp232), copy the zip onto the smartphone and reboot into recovery mode. There i use CMW to first wipe cache and delvik cache, then select and install new version from zip.
Correct way so far?
What about the Google Apps? Do i have to reinstall them too?
Do i have to backup the SD card data and my apps,?
2. The Camera Fix
At the beginning i thought that i could live with an inverted camera due to the fact, that i am not taking many of them with my phone. but during the last weeks i had to face the facts - its important from time to time :cyclops:
During my search in this forum i found a user linking to a file called "FXP231_CM10_CamReverse_Fix".
Does this work only with FXP231, or also earlier and later versions?
How do I install it, like gApps in CMW?
3. Alarm Clock
I am using my phone as an alarm clock almost every day. Its plugged in to recharge during the night. Sometimes the phone crashes during the night time and the alarm is not going off. The display turns dark, no reaction to any button i plress, only the little signal light at the top right is glowing constantly. I have to take out the battery every time and make the same changes in settings over and over again.
Is this the "deepsleep" problem everyone is talking about? Is it connected to the cpu settings - I did select "conservative" there. Whats causing the problem?
4. Dial Pad
Every time i am dialing an unknown number the touchpad is hardly responding. It can take up to 5 minutes to enter all numbers and dial. I already deactivated the T9 contact search, still no improvement. Anyone any similar expieriences?
5.General Custom ROM Question
During my journey through this Community I found out, that there are a lot of different roms available. Some - with only minor changes - based on other custom roms, some based on sony.....whatever. Right now i am totally confused that ROM to use (if the above mentioned problems cant be solved!!)
I just need a quiet fast and reliable ROM to use in daily life - well this is everyones wish i guess......
So what am I doing with my phone? Basically I am just using my phone to call people, use whatsapp, check mails, manage my appointments and take a spontaneus picture from time to time. No Video, Twitter, Facebook, Games and what else is out there...........and no big experiments and time to backup, upgrade and reset my phone stuff every week.
Should I go back to CM9?
Cant I install a "normal google android" rom? Might sound stupid, but isnt there some kind of "pure" rom for all phones, that gives you the same comfort as the sony stock rom (-> update and functionality) ?
Even if there is not THE correct answert to this question, maybe some of you can at least suggest some interesting ROMs, that might fit
uff.....long wall of text, hopefully I could point out my problems good enough to motivate you to spent your time to answer them.
phil.star said:
Hi xda Community,
at first - BIG THANKS TO ALL OF YOU ACTIVE CUSTOM ROM GUYS!!
With all your FAQs, Videos and postings, you made it possible - and easy - for me, to get rid of the annoying Sony ROM by rooting and installing a custom rom.
Currently I am running CM10 FXP230 on my Xperia U. I know it is not a stable version, but still a great improvement in speed for me and also the first ROM i discovered during my internet research for an alternative to the slow stock sony stuff.
However, i am facing some problems during the daily usage of my phone, perhaps one of you can support me during finding a solution for some of them.
1. Updating ROM
Pretty basic question, just need a confirmaton that i understood it the right way. I download the new Version of the custom rom (e.g.fxp232), copy the zip onto the smartphone and reboot into recovery mode. There i use CMW to first wipe cache and delvik cache, then select and install new version from zip.
Correct way so far?
What about the Google Apps? Do i have to reinstall them too?
Do i have to backup the SD card data and my apps,?
2. The Camera Fix
At the beginning i thought that i could live with an inverted camera due to the fact, that i am not taking many of them with my phone. but during the last weeks i had to face the facts - its important from time to time :cyclops:
During my search in this forum i found a user linking to a file called "FXP231_CM10_CamReverse_Fix".
Does this work only with FXP231, or also earlier and later versions?
How do I install it, like gApps in CMW?
3. Alarm Clock
I am using my phone as an alarm clock almost every day. Its plugged in to recharge during the night. Sometimes the phone crashes during the night time and the alarm is not going off. The display turns dark, no reaction to any button i plress, only the little signal light at the top right is glowing constantly. I have to take out the battery every time and make the same changes in settings over and over again.
Is this the "deepsleep" problem everyone is talking about? Is it connected to the cpu settings - I did select "conservative" there. Whats causing the problem?
4. Dial Pad
Every time i am dialing an unknown number the touchpad is hardly responding. It can take up to 5 minutes to enter all numbers and dial. I already deactivated the T9 contact search, still no improvement. Anyone any similar expieriences?
5.General Custom ROM Question
During my journey through this Community I found out, that there are a lot of different roms available. Some - with only minor changes - based on other custom roms, some based on sony.....whatever. Right now i am totally confused that ROM to use (if the above mentioned problems cant be solved!!)
I just need a quiet fast and reliable ROM to use in daily life - well this is everyones wish i guess......
So what am I doing with my phone? Basically I am just using my phone to call people, use whatsapp, check mails, manage my appointments and take a spontaneus picture from time to time. No Video, Twitter, Facebook, Games and what else is out there...........and no big experiments and time to backup, upgrade and reset my phone stuff every week.
Should I go back to CM9?
Cant I install a "normal google android" rom? Might sound stupid, but isnt there some kind of "pure" rom for all phones, that gives you the same comfort as the sony stock rom (-> update and functionality) ?
Even if there is not THE correct answert to this question, maybe some of you can at least suggest some interesting ROMs, that might fit
uff.....long wall of text, hopefully I could point out my problems good enough to motivate you to spent your time to answer them.
Click to expand...
Click to collapse
First of all, this is a long question and you must donate me for answering. Haha. Just joking but you need to consider yourself and get experiences.
1. Reboot CWM and install the ROm amd Gapps needs to be reinstalled.
Wipe dalvik cache and cache then reboot. You're updated.
2. It is for FXP231 and so you must install 231 in order to have fixed
3. Go to deepsleep so much in CM10. Some said pretty awesome because it saves battery but it is in deep sleep so you can't really control your phone no more. Like you can't awake in the morning because you are in deep sleep.so hard to wake up. And yes your problem is deep sleep.
4. Use Go Dialer or Touchpal Dialer. Download from Play Store. It will make you better. Stock is still laggy and under development.
5. I run SlimCM which is CM9 and everything works except sound bug and FM Radio. Sound bug can be fix with Viper4Android. Run CM9 which is great, fast and stable.
And I really want to advice you is find out more yourself. It's more getting trouble but you will become more awesome I answer your question short so don't mind me about that but if you need anything, just quote and ask. Bye.
Sent from my Xperia U using Tapatalk 2
Sorry for asking again, but most times i just dont have the needed phrase to search for - combines with 50+ pages of results it really drives me crazy sometimes. After making a, lets say really stupid mistake, installing the rom in the beginning, it took me almost ages to find the threat to return to the beginning and reinstall it properly.
Little Zed said:
First of all, this is a long question and you must donate me for answering. Haha. Just joking but you need to consider yourself and get experiences.
3. Go to deepsleep so much in CM10. Some said pretty awesome because it saves battery but it is in deep sleep so you can't really control your phone no more. Like you can't awake in the morning because you are in deep sleep.so hard to wake up. And yes your problem is deep sleep.
Click to expand...
Click to collapse
^
Thanks a lot for reading and answering my questions anyway, you got yourself a honest "thanks button klick" as a reward :laugh:
Okay, so now i know that "my deepsleep problem" is kind of a reversed version of almost everyone eleses deepsleep problem. Everyone wants his phone to enter deepsleep, i want to prevent that.
Will this app solve the problem? Deep Sleep Battery Saver
I mean, if I can set the phone to "wake up" short before my alarm time it might work, right?
I read something about Apps causing the problem, especially messenger apps. Can anyone verify that information, or is it some random guess?
Edit:
Also I found out, that the Phone should not enter deepsleep while being charged. Unfortunately this seems to happen to mine over and over again.
phil.star said:
Sorry for asking again, but most times i just dont have the needed phrase to search for - combines with 50+ pages of results it really drives me crazy sometimes. After making a, lets say really stupid mistake, installing the rom in the beginning, it took me almost ages to find the threat to return to the beginning and reinstall it properly.
^
Thanks a lot for reading and answering my questions anyway, you got yourself a honest "thanks button klick" as a reward :laugh:
Okay, so now i know that "my deepsleep problem" is kind of a reversed version of almost everyone eleses deepsleep problem. Everyone wants his phone to enter deepsleep, i want to prevent that.
Will this app solve the problem? Deep Sleep Battery Saver
I mean, if I can set the phone to "wake up" short before my alarm time it might work, right?
I read something about Apps causing the problem, especially messenger apps. Can anyone verify that information, or is it some random guess?
Edit:
Also I found out, that the Phone should not enter deepsleep while being charged. Unfortunately this seems to happen to mine over and over again.
Click to expand...
Click to collapse
DS battery saver is the one for some phones that cannot go into deepsleep. It force the phone to Deep Sleep with some profiles to make your phone not deaf. Good app and I'm using it.
Blah blah blah, anyway, it's the ROM problem I think but you can simply reply FXP's CM10 about the fix No worries. I think you can fix nothing at this stage. And also I thought Alarm app crashing amd screen not waking up is not only the Deep Sleep issues but also the rom bug of excessive Deep Sleep or alarm app not fully functional. Please reply to the rom thread and wait for answer! High Five!!
Sent from my Xperia U using Tapatalk 2
Cyanogenmod 12.0 Semi-Official
HTC Evo 4G LTE ( jewel )
Basic Overview
Source built Cyanogenmod 12.0 hot off the server. No changes at all to anything. Sync and build.
This has not been officially released as of yet. Still very early code, there will be random bugs, and missing features still. They are coming.
Please refrain from reporting bugs because of this. Thank you.
Besides that It seems good enough for a "Daily Driver". No major malfunctions, just the random glitches as the code evolves as normal.
Requirements:
S-Off, HBOOT 2.10+ & 4.13.651.4 Firmware Update to function correctly. @Captain_Throwback's TWRP 2.7.1.0b , 2.8.0.x, 2.8.1.x recoveries recommended.
NPL recovery though. That's the only catch here.
Installation...
Wipe, reboot recovery.
Install CM-12.0, reboot.
One it finishes booting, reboot to recovery.
Install gapps, wipe dalvik & cache, reboot.
Profit
ROM Source: https://github.com/CyanogenMod/android/tree/cm-12.0
Original Kernel Source: https://github.com/CyanogenMod/android_kernel_htc_msm8960/tree/cm-12.0
Bugs...
Superuser settings cause Settings to FC currently. But remains functional.
Previous Release:
https://www.androidfilehost.com/?fid=95832962473395998
Current Release:
https://www.androidfilehost.com/?fid=95832962473397836
Current Release Gapps:
https://www.androidfilehost.com/?fid=95832962473397837
Partner Builds & Sub-projects
Partner Builds:
11-29-2014 Build: https://www.androidfilehost.com/?fid=95832962473394878 by @fizbanrapper
And it begins...
First Android 5.0 ROM for Jewel that works... And based off of one of the best Android 4.4.4 ROMs there was for Jewel as well. Enjoy everyone. Much more to come.
Cool. Sounds good. I may give it a try, just to say that I have 5.0. But I would like to have the camera working... But it is probably something that I can live with.
I've tried a flash, for the first time I experienced stuck in the boot, after I restarted again and then succeed, what becomes of bugs on camera?I have tried to take a picture with my camera and it worked fine, but I want to report that when opening the case of mobile networks in settings force close , thanks for dev , sorry for my bad english
ermariio said:
I've tried a flash, for the first time I experienced stuck in the boot, after I restarted again and then succeed, what becomes of bugs on camera?I have tried to take a picture with my camera and it worked fine, but I want to report that when opening the case of mobile networks in settings force close , thanks for dev , sorry for my bad english
Click to expand...
Click to collapse
First off, great work beating me to the punch on this. I was tinkering with CM 12 code all month.
Secondly, I can repeat what was said previously. I got a bootloop the first time, but after I turned it off, it booted up fine.
ocarinaz64 said:
First off, great work beating me to the punch on this. I was tinkering with CM 12 code all month.
Secondly, I can repeat what was said previously. I got a bootloop the first time, but after I turned it off, it booted up fine.
Click to expand...
Click to collapse
same here but it is running great so far
Ok. Camera bugs. I don't know. I just cut what lines out the compiler broke because of. And I have no cam. Idk why. My mobile network seems fine.. But come on guys. This is early code, so there's going to be bugs I have no control over. That would be more CMs thing. I just am basically doing what LSX64 did. No boot loop for me either. Weird...
I was saying this rom is running great thanks for the hard work. :good: I didn't expect to see a 5.0 rom for this phone. so thanks again for this rom.
jarheadusmc67 said:
I was saying this rom is running great thanks for the hard work. :good: I didn't expect to see a 5.0 rom for this phone. so thanks again for this rom.
Click to expand...
Click to collapse
Ok. No worries. I didn't either. So when I got it to even fire up.. I knew what I had to do. 5.0 for everyone, and making it a UnityROM, just a bonus
Does LTE work?
Psycario said:
Does LTE work?
Click to expand...
Click to collapse
I have no idea. I think so.. I have no LTE where I live
jarheadusmc67 said:
I was saying this rom is running great thanks for the hard work. :good: I didn't expect to see a 5.0 rom for this phone. so thanks again for this rom.
Click to expand...
Click to collapse
I can say that as long as I've got my Jewel, and as long as the code works, I'll be cranking things out. I'm really partial to Slim series ROMs, but I was super eager to try out L so I flashed this one. Also, it looks like CM is going to continue to support this thing for the foreseeable future. Once they start their nightly builds, it should be available there, too. Though, without the extra butter.
Thanks for the work and the build.
ocarinaz64 said:
I can say that as long as I've got my Jewel, and as long as the code works, I'll be cranking things out. I'm really partial to Slim series ROMs, but I was super eager to try out L so I flashed this one. Also, it looks like CM is going to continue to support this thing for the foreseeable future. Once they start their nightly builds, it should be available there, too. Though, without the extra butter.
Thanks for the work and the build.
Click to expand...
Click to collapse
No problems there man I know you do your thing. But.. Do you happen to know how to do that dark ui button
ZX64 said:
Ok. Camera bugs. I don't know. I just cut what lines out the compiler broke because of. And I have no cam. Idk why. My mobile network seems fine.. But come on guys. This is early code, so there's going to be bugs I have no control over. That would be more CMs thing. I just am basically doing what LSX64 did. No boot loop for me either. Weird...
Click to expand...
Click to collapse
Well done! Glad to have you back!
This is working surprisingly well for a first build. The first KitKat builds were total garbage, comparatively.
I'm using it as a daily driver for now. The latest Beta SuperSU will get you properly rooted on LP too. I'll post the link when a bit later (have to find it again), but Google will get you there for now.
Issues (none of which are controllable by the OP) and fixes
Issue one - keyboard doesn't always pop up like it's supposed to. So far I've been able to fix it every time by simply turning my phone sideways, then back.
Issue two - Sometimes not all choices are viewable in pop up boxes. I was able to get around this by changing screen density to 280.
Issue 3 - APN menu doesn't do anything of value. To change apn settings, download sql editor. Open telephony.db which is located at data/data/android.providers.telephony/databases. Then locate the 310120 lines and edit the values as you normally would for your carrier. Your phone will now use the desired APN settings.
Is it possible to turn off your modem like it was in 4.4? I don't see any option for that anywhere. The reason being is that I don't like my phone downloading things when I don't tell it to. It wastes my data, and gets annoying.
ocarinaz64 said:
Is it possible to turn off your modem like it was in 4.4? I don't see any option for that anywhere. The reason being is that I don't like my phone downloading things when I don't tell it to. It wastes my data, and gets annoying.
Click to expand...
Click to collapse
Does this help?
http://forum.xda-developers.com/showthread.php?p=56866237
fizbanrapper said:
Does this help?
http://forum.xda-developers.com/showthread.php?p=56866237
Click to expand...
Click to collapse
Theoretically that is what I was looking for. But now that I'm testing my phone, I realized that I'm not able to actually make or receive calls. Idk if that was because of the widget or what. It might also be a carrier problem.
EDIT - It was a carrier problem, but caused by what, I can't say.
fizbanrapper said:
Well done! Glad to have you back!
This is working surprisingly well for a first build. The first KitKat builds were total garbage, comparatively.
I'm using it as a daily driver for now. The latest Beta SuperSU will get you properly rooted on LP too. I'll post the link when a bit later (have to find it again), but Google will get you there for now.
Issues (none of which are controllable by the OP) and fixes
Issue one - keyboard doesn't always pop up like it's supposed to. So far I've been able to fix it every time by simply turning my phone sideways, then back.
Issue two - Sometimes not all choices are viewable in pop up boxes. I was able to get around this by changing screen density to 280.
Issue 3 - APN menu doesn't do anything of value. To change apn settings, download sql editor. Open telephony.db which is located at data/data/android.providers.telephony/databases. Then locate the 310120 lines and edit the values as you normally would for your carrier. Your phone will now use the desired APN settings.
Click to expand...
Click to collapse
Yeah kk was garbage for the first few months even. So LP way better so far in that way. Glad to have me back? I was here before?
Ok so next build I'll set to 280 and see about that. I have no idea on the KB lol I just used google KB cause it has a dark ui option.
But properly rooted... Big must have there. That I want fixed lol.
I have tried this rom full day, very nice, I just restart sometimes problematic when there is no data connection and GPS is not accurate,
Q&A for [ROM][LP][5.0.2][UNOFFICIAL]BlissPop v1.8 - Updated 01/23/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LP][5.0.2][UNOFFICIAL]BlissPop v1.8 - Updated 01/23/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Torch and camera
torch don't work, camera take a shoot will crash
zeronatdo said:
torch don't work, camera take a shoot will crash
Click to expand...
Click to collapse
Torch working for me. Google camera from play store works as a replacement for the broken stock camera.
dandrumheller said:
Torch working for me. Google camera from play store works as a replacement for the broken stock camera.
Click to expand...
Click to collapse
Thanks, i will try :good:
GPS still isn't working
I dirty flashed from 1.8 to 2.0 but the gps still doesn't work.
edit: i used the gps tool box app and actually it works now, but it still takes a long time to lock onto GPS, anyway thanks for this rom!
omgitslink said:
I dirty flashed from 1.8 to 2.0 but the gps still doesn't work.
edit: i used the gps tool box app and actually it works now, but it still takes a long time to lock onto GPS, anyway thanks for this rom!
Click to expand...
Click to collapse
Agreed, GPS locks seem slow. Might be what we are stuck with given the cm12 fix.
Havent been on any other gproj ROMs to compare.
Google camera
Does all functions work in the google camera (panorama, photo sphere and lens blur)? Right now I'm using CM12 official with Solid Kernel and only regular photo and video is working.
ryupunk said:
Does all functions work in the google camera (panorama, photo sphere and lens blur)? Right now I'm using CM12 official with Solid Kernel and only regular photo and video is working.
Click to expand...
Click to collapse
Sure, go and find something not working why don't you.
I hadn't tried any of them. Sphere and pano only show black screens, apparently not working. Lens blur is functional
dandrumheller said:
Sure, go and find something not working why don't you.
I hadn't tried any of them. Sphere and pano only show black screens, apparently not working. Lens blur is functional
Click to expand...
Click to collapse
Actually, that's a problem with all the lollipop roms that I have tried for the e970 (and most of the KK, except for some the MAKO based). Seems that our camera is quite difficult to please....
BTW dandrumheller, it seems that you have tried most of the roms out there for our device, which one did you find more stable? At the time I'm using the official CM12 with Solid Kernel and in my opinion is really good (except for the camera and the bluetooth address, which aren't dealer breakers for me). Thanks.
ryupunk said:
Actually, that's a problem with all the lollipop roms that I have tried for the e970 (and most of the KK, except for some the MAKO based). Seems that our camera is quite difficult to please....
BTW dandrumheller, it seems that you have tried most of the roms out there for our device, which one did you find more stable? At the time I'm using the official CM12 with Solid Kernel and in my opinion is really good (except for the camera and the bluetooth address, which aren't dealer breakers for me). Thanks.
Click to expand...
Click to collapse
I actually haven't tried many of the Lp roms. Candy5 has been the most stable and battery efficient for me. Had some issues with bsod on beanstalk 5.0, though 4.4 versions were excellent. Blisspop has been quite stable, but uninspiring in terms of battery life. My phone hates solid kernel - tons of freeze and crash issues. In general I seem to have better luck with mako based roms. Have not tried CM12 yet.
dandrumheller said:
I actually haven't tried many of the Lp roms. Candy5 has been the most stable and battery efficient for me. Had some issues with bsod on beanstalk 5.0, though 4.4 versions were excellent. Blisspop has been quite stable, but uninspiring in terms of battery life. My phone hates solid kernel - tons of freeze and crash issues. In general I seem to have better luck with mako based roms. Have not tried CM12 yet.
Click to expand...
Click to collapse
Cool. I might try Candy5 and see how it goes. Thanks for you answers!
I'm having an issue where the contact names aren't showing up in the stock messenger, or gosms (haven't tried at other). The full number shows, but never the names. I've tried clearing caches and data on contacts and messengers. Tried resyncing the contacts from Google. I've double checked the privacy guard settings. Basically, I've searched around and tried everything I can think of, but still no luck! So I figured I'd ask the experts! Any ideas???
Ive noticed a few other minor issues. ...
I've had the problem with not being able to move the download, as someone mentioned above. Ive had to connect to PC, transfer from phones internal storage to the PC, then back to EXT SD card in the phone.
The 2/13 build does seem to be a little harder on the battery, and runs a lil warm (also mentioned above). I haven't had any crashing issues, but can feel the temp difference over the average.
Possibley related to the heat and battery issues; I noticed that there are two interfaces for the CPU/GPU clocking and scheduling, under the Performance section of System Settings. Maybe there's a conflict happening there? From memory, I don't remember the "Device Control" section being there in the previous build. It seems redundant to have both. Although Device Settings is much more robust, and I would prefer it be integrated instead of keeping the old, minimal interface. Some adjustments to Device Settings, while disabling the other minimal settings on boot, seems to have helped with heat and battery drain a little bit.
No problems with GPS, that I've noticed
Titanium Backup v6 has problem gaining root access in all cm12 ROMs I've tried. To fix, go to Titanium BU Preferences, scroll to bottom, select Troubleshoot Options (or something like that), and highlight/select the option to force the app to use the SYSTEM busybox, not the one baked into Titanium BU. Restart the app, and root works. Also worth mentioning is that you may have to enable root access under Developer Options in System Settings before any app can gain root. Otherwise, no issues with root, or Super SU.
Hi,
After using Beanstalk 4.4 for several months, finally I tried first LP based ROM BlissPop...so far it seem good, only couple of crashes in last week, few issues are present that are highlighted already (like camera panorama not working...battery life affected).
Since last couple days, the strange issue is being encountered, when i get a call, phone rings but there is no interface to receive the call, i then have to go to call screen and there it says "return to the active call" when i click, i get to the screen where i can receive the call. This started happening without any updates so not sure what caused it? I even tried latest version of ROM but same issue present.
Any ideas?
P.S: thanks to everybody who contributes to this excellent site, i have been a regular reader of the site but got to post something today for the first time.
dandrumheller said:
I actually haven't tried many of the Lp roms. Candy5 has been the most stable and battery efficient for me. Had some issues with bsod on beanstalk 5.0, though 4.4 versions were excellent. Blisspop has been quite stable, but uninspiring in terms of battery life. My phone hates solid kernel - tons of freeze and crash issues. In general I seem to have better luck with mako based roms. Have not tried CM12 yet.
Click to expand...
Click to collapse
---------- Post added at 07:35 AM ---------- Previous post was at 06:49 AM ----------
Okay, it turned out to be a feature that some one must have activated on my cell (my little kiddo likes to tinker with my cell)
In App Notification section, Dialer was blocked and that was causing it to not show up whenever i got a call.
Its working great now
idreamido said:
Hi,
After using Beanstalk 4.4 for several months, finally I tried first LP based ROM BlissPop...so far it seem good, only couple of crashes in last week, few issues are present that are highlighted already (like camera panorama not working...battery life affected).
Since last couple days, the strange issue is being encountered, when i get a call, phone rings but there is no interface to receive the call, i then have to go to call screen and there it says "return to the active call" when i click, i get to the screen where i can receive the call. This started happening without any updates so not sure what caused it? I even tried latest version of ROM but same issue present.
Any ideas?
P.S: thanks to everybody who contributes to this excellent site, i have been a regular reader of the site but got to post something today for the first time.
Click to expand...
Click to collapse
system control issue
I went through all 9 pages of the thread and didnt notice anyone else having this issue. In 2.2 under performance and then system control app when one goes to features and then vibration intensity it just force closes on me...is anyone else having this issue? Any suggestions on what I can do to fix?
So I'd like to see what was being discussed in the normal thread for this great rom but the following link isn't working and since I'm a forum baby I'm not allowed to post in the grownup thread... Can anyone help me out with this? Does anyone check this side of the thread?
http://click.xda-developers.com/api...ww.reddit.com/r/oneplus/comm...updateservice/
---------- Post added at 10:43 PM ---------- Previous post was at 10:39 PM ----------
Also, the last build(the one before latest) ... The vibration control in performance>device control was fixed and working.... In the latest build it's broken once again and force closing every time I select it. Just wanted to mention in case no one is aware of it.
So if 4.8.15 is the latest build why does the ota update app found in the app drawer ask me to update to the latest version so my configuration will be appropriate for ota updates? Is there something specific I have to do in order for that feature to work properly?
Lol is this thing on?
In the latest build, was the performance tab in settings cut out of the build?
---------- Post added at 02:40 PM ---------- Previous post was at 02:33 PM ----------
MitchRapp01 said:
In the latest build, was the performance tab in settings cut out of the build?
Click to expand...
Click to collapse
It contained the free app that allowed you to do all kinds of different things with the phone...I forget what it was called....I know part of the file name was x.nameless rom.com
You can try kenvinjoa kernel or nitro kernel
Does this build allow encryption?