Related
Not sure what to do, I am downloading roms and trying to install them through a bootloader. I have a clockwork recovery mod that I am using.
I deleted HTC sense on accident, idiot move i know.
Can you guys give me some tips or point me in the right direction to get my phone working again?
Tried installing CM9 and CM10 but it would just loop the intro....
Well you should have made a nandroid before flashing anything... If you did restore your nandroid.
If you didn't flash android revolution hd. (Before you did this were you on ics of gb)
Sent from my epic amaze 4g
zer0veritas said:
Not sure what to do, I am downloading roms and trying to install them through a bootloader. I have a clockwork recovery mod that I am using.
I deleted HTC sense on accident, idiot move i know.
Can you guys give me some tips or point me in the right direction to get my phone working again?
Tried installing CM9 and CM10 but it would just loop the intro....
Click to expand...
Click to collapse
Not clear at all. How'd you "delete" HTC Sense?
You are supposed to wipe before flashing a ROM. Also, CM9/10 aren't even fully working. So why are you trying to flash it in the first place?
hasoon2000 said:
So why are you trying to flash it in the first place?
Click to expand...
Click to collapse
You really don't know? Lol
Op, you should have read up before attempting any of this. We will help you though
Sent from my epic amaze 4g
zer0veritas said:
Not sure what to do, I am downloading roms and trying to install them through a bootloader. I have a clockwork recovery mod that I am using.
I deleted HTC sense on accident, idiot move i know.
Can you guys give me some tips or point me in the right direction to get my phone working again?
Tried installing CM9 and CM10 but it would just loop the intro....
Click to expand...
Click to collapse
Well first off you don't install roms through bootloader you install them through recovery, maybe u just said that wrong.
Second, what where you running on your phone before you tried flashing these roms?
sent from my NRGized Amaze,
powered by faux kernel v.12
This simply doesn't make any "SENSE", pun intended.
Dark Nightmare said:
This simply doesn't make any "SENSE", pun intended.
Click to expand...
Click to collapse
Ok the reason im not making any sense is because I've been up so late trying to fix this. Been learning a lot in the process.
Here's what happened, I was using a file manager (my phone is rooted) and deleted htc sense while it the phone was on. Now I am trying to flash a custom rom through the recovery mode and flash the kernal (boot.img) through fast boot.
Nothing is working. The closest I got was with cyanogen mod 9 but It was giving me errors when trying to connect to any networks.
Did you wipe/factory reset? Otherwise you would have a lot of problems trying to flash cyanogen over sense. Also cyanogen has lots of bugs still.... So I recommend you go with a Sense based rom.... Android Revolution/Energy/Speedrom. Those are the ones that have the least bugs.
Here's your best resolve, reload the stock RUU via hboot, if you're s-on, don't forget to relock the bootloader, if not, just reflash the stock ruu via hboot, that should solve all your issues, I don't get why you'd go to cm9 and 10 instead of a stock based rom, but for the simplest way to resolve the issue would be to flash the stock ruu via hboot.
Hi, I moved your thread to the Q&A section. Please keep all question related threads in Q&A. Also, please search the forums before creating threads. Chances are, a thread about your particular query already exists, with answers.
Thank You.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice
Sent from my HTC One X, using XDA Premium
http://forum.xda-developers.com/announcement.php?a=81
Install this on my htc evo 3d hboot 1.5 and the panorama portion of the camera is not working. I get squiggle line all over the screen. worked fine in ics.
neojim913 said:
Install this on my htc evo 3d hboot 1.5 and the panorama portion of the camera is not working. I get squiggle line all over the screen. worked fine in ics.
Click to expand...
Click to collapse
Works fine for me. Did you do a fresh flash? What CM10 version are you running?
Thanks for sharing, but once you get your 10 posts, you may wasn't to post this in the Rom thread so the dev will notice.
CiDhed said:
Works fine for me. Did you do a fresh flash? What CM10 version are you running?
Click to expand...
Click to collapse
coal686 said:
Thanks for sharing, but once you get your 10 posts, you may wasn't to post this in the Rom thread so the dev will notice.
Click to expand...
Click to collapse
I am using the current CM 4.1.2
CiDhed said:
Works fine for me. Did you do a fresh flash? What CM10 version are you running?
Click to expand...
Click to collapse
Sorry and Yes I did a fresh. my old rom was the trib sense 3.6. so i had to downgrade to hboot 1.5 from1.58.
Okay I've never used Cynogen before so pardon the ignorance. So I want to know if I'm on PG86IMG_JBear_1.57.5757_hboot_VM_ICS version if that is going to cause a problem? If not do I just grab the stock hboot?
I don't know how to delete this but I posted in the development thread. Sorry
travisr528 said:
Okay I've never used Cynogen before so pardon the ignorance. So I want to know if I'm on PG86IMG_JBear_1.57.5757_hboot_VM_ICS version if that is going to cause a problem? If not do I just grab the stock hboot?
I don't know how to delete this but I posted in the development thread. Sorry
Click to expand...
Click to collapse
You need to be on hboot 1.5 or lower. If you are s-off, you can just downgrade, but if you're s-on, you'll need to get s-off first.
So basically I'm a bit of a noob when it comes to Android rooting and flashing etc. I've managed to successfully root my One X+ using Hasoon2000's awesome toolkit and I used the CWM International, I have SuperSU running fine. Now I've done that I would like to install the Android Revolution HD ROM.
Carrier: O2
CID: 02___001 (That is with 3 underscores)
Software Version: 1.17.206.1
HTC Sense: 4+, Android 4.1.1
HBOOT: 1.35
Kernel: 3.1.10
Baseband: 3.1204.168.32
No idea if all this is relevant but I thought I'd better give it.
Is my phone compatible first of all, and also any advice or links to guides on how to do it or what to do to prepare. I was particularly curious about my CID having 3 underscores when almost all other CID's I could find reference to only has 2 underscores?
Finally I'd quite like to know about anything cool or interesting I can do at this point or while installing the ROM, I'd heard about custom boot-up animations or something like that?
Boot animations are just .zips stored in system/media or system/customize/resource. Make sure the resolution and screen size is the same as the phone. All boot animations in One X and X+ section will work for a fact.
I have no idea about the underscore thing. But if your phone works then I guess all is good. Post in the rom's thread if you are worried.
Sent from my HTC One X+
Sadly, no
UK_Frosticles said:
Is my phone compatible first of all, and also any advice or links to guides on how to do it or what to do to prepare. I was particularly curious about my CID having 3 underscores when almost all other CID's I could find reference to only has 2 underscores?
Click to expand...
Click to collapse
I've got some good news and some bad news. The good news are; though you say you're a noob, atleast you paid attention to the CID-number
The bad news are; since we're not S-OFF yet, you can't change the CID-number, hence you can't flash the ARHD rom untill O2 comes out with an updated firmware package.
Stenberg^ said:
I've got some good news and some bad news. The good news are; though you say you're a noob, atleast you paid attention to the CID-number
The bad news are; since we're not S-OFF yet, you can't change the CID-number, hence you can't flash the ARHD rom untill O2 comes out with an updated firmware package.
Click to expand...
Click to collapse
At the moment the CID is irrelevant because it's only needed to flash the firmware package which isn't needed to flash the ROM. So you can flash ARHD just not the firmware package.
PaulR27 said:
At the moment the CID is irrelevant because it's only needed to flash the firmware package which isn't needed to flash the ROM. So you can flash ARHD just not the firmware package.
Click to expand...
Click to collapse
Actually i think the point he is making is, 02 are yet to release an official rom containing the latest hboot version. People with lower hboot versions are having issues with custom roms based on the latest software update. So alot of devs have advised that people with the lower hboot versions to update hboot before flashing.
Sent from my HTC One X+ using Tapatalk 2
He has 1.17 firmware and 1.35 hboot, is it there any newer? I was running bindroid beta prior release on 1.14, 1.16, 1.17 without any glitch or problem, so I dont see any problem to flash arhd or any custom rom
Sent from my HTC One X+ using XDA Premium App
Sorry, I posted this thread in wrong location..
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
If you're on Hboot 1.15+, you need to flash the kernel separately from the ROM if you're S-on. Click the link in my sig for further info.
The tampered warning at the top of the bootloader screen is normal.
Sent from my EVO using xda premium
FinZ28 said:
If you're on Hboot 1.15+, you need to flash the kernel separately from the ROM if you're S-on. Click the link in my sig for further info.
The tampered warning at the top of the bootloader screen is normal.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I'm pretty sure I have 1.15+. I'm gonna try this today.
Thanks in advance.
BTW u mentioned stable cm 10 as in the stable release from get.cm? I recommend getting the new build via IRC as the get.cm version hasn't been updated in ages
Sent from my EVO using xda premium
luigi311 said:
BTW u mentioned stable cm 10 as in the stable release from get.cm? I recommend getting the new build via IRC as the get.cm version hasn't been updated in ages
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yes, it is from get.cm
where can I get the new build? I mean what is IRC?
FinZ28 said:
If you're on Hboot 1.15+, you need to flash the kernel separately from the ROM if you're S-on. Click the link in my sig for further info.
The tampered warning at the top of the bootloader screen is normal.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
You are right. I must flash the kernel and I did. guess what? It got flashed and after CM boot the next screen is language setup and my touchscreen is not responding at all...only the power and volume buttons are working..
I had a backup so thought of going back to it and I restored to it. It is not even booting up. My phone stays at htc quietly brilliant screen for long time and then splashing screen 2 times in a minute or so and then restarting automatically.
I have no clue what to do at this point.
I had Jellybam ROM saved on my sd card so I wiped my phone and flashed it. after rebooting it got stucked at htc boot screen.
I'm thinking may be the kernel doesn't support the Jellybam ROM. Is it?
How can I change the kernel?
How can I use my phone now?
does Jellybam requires separate kernel to flash it?
can you recommend any ROM's which includes their own kernel?
any help is greatly appreciated.
pashi266 said:
Yes, it is from get.cm
where can I get the new build? I mean what is IRC?
Click to expand...
Click to collapse
The stable download is an ancient version of CM. Circa 2012 ancient. IRC = Internet Relay Chat. There should be a sticky on this forum for how to setup and connect to IRC. Latest build can be found there.
pashi266 said:
You are right. I must flash the kernel and I did. guess what? It got flashed and after CM boot the next screen is language setup and my touchscreen is not responding at all...only the power and volume buttons are working..
I had a backup so thought of going back to it and I restored to it. It is not even booting up. My phone stays at htc quietly brilliant screen for long time and then splashing screen 2 times in a minute or so and then restarting automatically.
I have no clue what to do at this point.
I had Jellybam ROM saved on my sd card so I wiped my phone and flashed it. after rebooting it got stucked at htc boot screen.
I'm thinking may be the kernel doesn't support the Jellybam ROM. Is it?
How can I change the kernel?
How can I use my phone now?
does Jellybam requires separate kernel to flash it?
can you recommend any ROM's which includes their own kernel?
any help is greatly appreciated.
Click to expand...
Click to collapse
If you're on the latest OTA (Hboot 2.09, baseband ending in 1210) you can only run ROM's based off the latest OTA (software version 3.16). This is due to an upgraded touch panel driver, which is why your touchscreen doesn't work. You can gain S-off and downgrade the driver so you can run AOSP ROM's, like CM.
Most Sense ROM's include a kernel installer to simplify the flashing process when S-on (MeanBean & ViperROM, to name a few). Just follow the instructions in the OP for whatever ROM you're wanting to flash.
Sent from my EVO using xda premium
FinZ28 said:
If you're on the latest OTA (Hboot 2.09, baseband ending in 1210) you can only run ROM's based off the latest OTA (software version 3.16). This is due to an upgraded touch panel driver, which is why your touchscreen doesn't work. You can gain S-off and downgrade the driver so you can run AOSP ROM's, like CM.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
could you tell me or provide a link for how to downgrade the driver (I can only go to TWRP recovery) and S-off?
pashi266 said:
could you tell me or provide a link for how to downgrade the driver (I can only go to TWRP recovery) and S-off?
Click to expand...
Click to collapse
S-off: http://forum.xda-developers.com/showthread.php?t=1964309
[S-OFF] DirtyRacun S-OFF - Sprint HTC EVO 4G LTE (HBOOT - 1.15 & 1.19)
Once you do that head to captain's thread firmware and downgrade your tp driver
Sent from my EVO
pashi266 said:
could you tell me or provide a link for how to downgrade the driver (I can only go to TWRP recovery) and S-off?
Click to expand...
Click to collapse
Like I said, you can install a ROM based off software version 3.16. That will get you up and running. As far as S-off, you'll have to use Dirty Racun, which can be found in the link below.
http://unlimited.io/jewel.htm
After gaining S-off, head over to Captain Throwback's firmware thread in the development section. You can download the 3.15 touch panel driver there. The link to his thread is below.
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO using xda premium
FinZ28 said:
Like I said, you can install a ROM based off software version 3.16. That will get you up and running. As far as S-off, you'll have to use Dirty Racun, which can be found in the link below.
http://unlimited.io/jewel.htm
After gaining S-off, head over to Captain Throwback's firmware thread in the development section. You can download the 3.15 touch panel driver there. The link to his thread is below.
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks @ FinZ28
I flashed MeanROM_3.09 and its working perfectly. Nothing wrong with it, except I felt like its not a custom ROM. I meant its nothing but htc sence with some extra. I was looking for ROM's which should be like pure google interface. ex. CM, clean ROM etc
I know I have to downgrade my firmware and S-off, but looks like my doors were closed. I'm a windows user and all the support was for Linux. (I decided to learn Linux ) I can get this done if I find any guide on doing S-off on windows.
Can you suggest any ROM's which will work on my device and which should look like pure google?
btw, I took your suggestion and tried installing ROM's based off 3.16. like JellyBam, cleanROM. JellyBam not even boot up and cleanROM having trouble with touchscreen. Not sure why.
This is my device config
Device: HTC EVO 4G LTE
JEWEL PVT SHIP S-ON RL (This is what I see when I go into bootloader)
Android version: 4.1.1
ROM: MeanROM_3.09
Kernel: [email protected]!1 SMP PREEMPT
HBOOT: 2.09.0000
Build number: 3.16.651.3 CL147243 release-keys
Baseband version: 1.12.11.1210
Radio: 1.12.11.1210
PRI: 2.97_003
PRL:25014
I'm not sure what requires to flash a new ROM, so I'm giving everything I know.
Thanks and I really appreciate your help.
pashi266 said:
Thanks @ FinZ28
I flashed MeanROM_3.09 and its working perfectly. Nothing wrong with it, except I felt like its not a custom ROM. I meant its nothing but htc sence with some extra. I was looking for ROM's which should be like pure google interface. ex. CM, clean ROM etc
I know I have to downgrade my firmware and S-off, but looks like my doors were closed. I'm a windows user and all the support was for Linux. (I decided to learn Linux ) I can get this done if I find any guide on doing S-off on windows.
Can you suggest any ROM's which will work on my device and which should look like pure google?
btw, I took your suggestion and tried installing ROM's based off 3.16. like JellyBam, cleanROM. JellyBam not even boot up and cleanROM having trouble with touchscreen. Not sure why.
This is my device config
Device: HTC EVO 4G LTE
JEWEL PVT SHIP S-ON RL (This is what I see when I go into bootloader)
Android version: 4.1.1
ROM: MeanROM_3.09
Kernel: [email protected]!1 SMP PREEMPT
HBOOT: 2.09.0000
Build number: 3.16.651.3 CL147243 release-keys
Baseband version: 1.12.11.1210
Radio: 1.12.11.1210
PRI: 2.97_003
PRL:25014
I'm not sure what requires to flash a new ROM, so I'm giving everything I know.
Thanks and I really appreciate your help.
Click to expand...
Click to collapse
Viper ROM has a "senseless" opción, when you flash it you can choose in the aroma installer this and it should remove most of sense or whatever is safe so you have the stability of sense plus some kind of pure google look by choosing nova or apex... It also has a kernel installer if you are s-on, a lot of customization and great support... Check it out here:
http://forum.xda-developers.com/showthread.php?t=2124391
pashi266 said:
I know I have to downgrade my firmware and S-off, but looks like my doors were closed. I'm a windows user and all the support was for Linux. (I decided to learn Linux ) I can get this done if I find any guide on doing S-off on windows.
Click to expand...
Click to collapse
There is another option that was recently released for Windows users with the most current OTA for S-OFF called Moonshine. You can find it if memory serves me correctly in 'Android Development' in the EVO LTE forums here.
Forgot to mention about moonshine, it is windows friendly as fas as I know...
http://forum.xda-developers.com/showthread.php?t=2321072
jocarog said:
Forgot to mention about moonshine, it is windows friendly as fas as I know...
http://forum.xda-developers.com/showthread.php?t=2321072
Click to expand...
Click to collapse
Ill try to do that after going home..not sure Ill get issues with Win 8 OS...previously it wasn't allow me to connect my device in adb. I may have to borrow my friends laptop..
I'm installing Viper now...will see how it goes.
thanks to you and @MFOsaka
jocarog said:
Forgot to mention about moonshine, it is windows friendly as fas as I know...
http://forum.xda-developers.com/showthread.php?t=2321072
Click to expand...
Click to collapse
jocarog said:
Viper ROM has a "senseless" opción, when you flash it you can choose in the aroma installer this and it should remove most of sense or whatever is safe so you have the stability of sense plus some kind of pure google look by choosing nova or apex... It also has a kernel installer if you are s-on, a lot of customization and great support... Check it out here:
http://forum.xda-developers.com/showthread.php?t=2124391
Click to expand...
Click to collapse
May be you can help me out here.
I just flashed (full install) Viper4g. after it said done rebooted the system and it got stuck at LTE animation.
Booted into recovery and flashed again with custom installation. I chose some with Nova launcher then rebooted after flashed the boot image. Now my phone was restarting automatically. Its been already 20 times and cont....
What should I do now?
pashi266 said:
May be you can help me out here.
I just flashed (full install) Viper4g. after it said done rebooted the system and it got stuck at LTE animation.
Booted into recovery and flashed again with custom installation. I chose some with Nova launcher then rebooted after flashed the boot image. Now my phone was restarting automatically. Its been already 20 times and cont....
What should I do now?
Click to expand...
Click to collapse
did you check the md5? did you made a nadroid of your meanbean setup? Team Venom has their own s-n kernel installer you can try to use it here is the link: http://www.androidfilehost.com/?fid=9390288116658472175
edit: wrong kernel installer sorry! here is the right one: http://www.androidfilehost.com/?fid=9390288116658474895
per OP in Viper Rom thread: Any User having issues with bootloops, please try Venom IMG Flasher to properly install the kernel. Choose the correct version above.
*This is currently for windows users only. It also includes TWRP recovery that you can flash if needed. Download the zip...extract...and run the .exe.
jocarog said:
did you check the md5? did you made a nadroid of your meanbean setup? Team Venom has their own s-n kernel installer you can try to use it here is the link: http://www.androidfilehost.com/?fid=9390288116658472175
edit: wrong kernel installer sorry! here is the right one: http://www.androidfilehost.com/?fid=9390288116658474895
per OP in Viper Rom thread: Any User having issues with bootloops, please try Venom IMG Flasher to properly install the kernel. Choose the correct version above.
*This is currently for windows users only. It also includes TWRP recovery that you can flash if needed. Download the zip...extract...and run the .exe.
Click to expand...
Click to collapse
Finally I got it done and using Viper4G with Nova launcher.
What I did was booted into recovery again and choose custom installation. that's it. Not sure what was the issue before, but now its working.
But, I really want cyanogenmod 10 with 4.2.2. So my search is still open. will take a look at the moonshine.
You guys are rock..prompt and very quick responses..I wish I would have do root and participate in this forum years ago
pashi266 said:
Finally I got it done and using Viper4G with Nova launcher.
What I did was booted into recovery again and choose custom installation. that's it. Not sure what was the issue before, but now its working.
But, I really want cyanogenmod 10 with 4.2.2. So my search is still open. will take a look at the moonshine.
You guys are rock..prompt and very quick responses..I wish I would have do root and participate in this forum years ago
Click to expand...
Click to collapse
Glad you got it fixed, try to get s-off using moonshine, as far as I know is windows friendly you just have to UNINSTALL HTC SYNC, and since you already rooted and unlocked I'm sure you have adb and fastboot in your computer and that's all you need! After that you should be able to downgrade your TP driver and use all the AOSP roms, man is great and now with Halo it's even better... Good Luck!
I have ICS hboot with TWRP for ICS in my Desire X. Whenever I try to install any JB ROM it doesn't boot up, just shows a black screen. What should I do? If you are saying me to S-OFF, I already tried to do that(with RUMRUNNER) but it betrayed me finally saying to try with a new kernel or a new ROM. Why there is so much complication? I just want to install a JB ROM. Can anyone help me with this? Will be thankful
@Sarun said:
I have ICS hboot with TWRP for ICS in my Desire X. Whenever I try to install any JB ROM it doesn't boot up, just shows a black screen. What should I do? If you are saying me to S-OFF, I already tried to do that(with RUMRUNNER) but it betrayed me finally saying to try with a new kernel or a new ROM. Why there is so much complication? I just want to install a JB ROM. Can anyone help me with this? Will be thankful
Click to expand...
Click to collapse
You need a jb hboot.
I know that...
Vineet Upadhyaya said:
You need a jb hboot.
Click to expand...
Click to collapse
Where can I find it and what's next?
@Sarun said:
Where can I find it and what's next?
Click to expand...
Click to collapse
As far as I know (I may be wrong) you have an flash an ruu. Then update to jellybean. After that you'll have to unlock the boot loader again and then you can flash jellybean roms.
Not working
Vineet Upadhyaya said:
As far as I know (I may be wrong) you have an flash an ruu. Then update to jellybean. After that you'll have to unlock the boot loader again and then you can flash jellybean roms.
Click to expand...
Click to collapse
I flashed the RUU, checked for the updates, it shows no JB update. What to do?
Need help to install custom rom for hboot 1.15
hi fellas, bit same problem here, i followed the exact procedures in installing the custom rom (ViMiRo ROM v3.0-1) on my HTC DX running on android 4.1.1 and hboot 1.15 by following DX threads. the recovery i flashed is CWM official mod for ICS. after showing successful installation of rom and rebooting, the phone shows the ViMiRo lock screen, but when tried unlocking, it stops at HTC logo and doesn't open further. Pls guide me to resolve this.
Chethan012 said:
hi fellas, bit same problem here, i followed the exact procedures in installing the custom rom (ViMiRo ROM v3.0-1) on my HTC DX running on android 4.1.1 and hboot 1.15 by following DX threads. the recovery i flashed is CWM official mod for ICS. after showing successful installation of rom and rebooting, the phone shows the ViMiRo lock screen, but when tried unlocking, it stops at HTC logo and doesn't open further. Pls guide me to resolve this.
Click to expand...
Click to collapse
1. you're not on hboot 1.15, but 1.25
2. use a recovery for JELLYBEAN, not ics. (twrp, you'll find it in "android original development")
...
this hboot/recovery-crap is killing me
My hboot version is 1.15
realCyphox said:
1. you're not on hboot 1.15, but 1.25
2. use a recovery for JELLYBEAN, not ics. (twrp, you'll find it in "android original development")
...
this hboot/recovery-crap is killing me
Click to expand...
Click to collapse
Hi pls check the attachment, seems like my hboot is 1.15..
Chethan012 said:
Hi pls check the attachment, seems like my hboot is 1.15..
Click to expand...
Click to collapse
guess thats a dual-sim then. roms for the normal desire x dont work on the dual-sim version, sorry.
read on here: http://forum.xda-developers.com/showthread.php?t=2537913
Yea its HTC DX dual sim
realCyphox said:
guess thats a dual-sim then. roms for the normal desire x dont work on the dual-sim version, sorry.
read on here: http://forum.xda-developers.com/showthread.php?t=2537913
Click to expand...
Click to collapse
Okay, I was thinking all these threads were refering to dual sim..thanks dev one more query, any cm rom available for my device yet?
Chethan012 said:
Okay, I was thinking all these threads were refering to dual sim..thanks dev one more query, any cm rom available for my device yet?
Click to expand...
Click to collapse
No CMs for DX ds