Hi there! I sit now beaten four hours (or more :crying on a S3 from a friend because he only had the problem that his S3 is not started ( Freeze the Samsung logo). He was eager that I should remove it its unwanted root access. After research I managed the S3 HALF WAY up and running or that the phone started normally. Luckily CWM was installed on the device...
Well , later I have downloaded an original 4.3 Unbranded FW and flashed using Odion . ( Drivers and other stuff was already on it ) So far so good . There were no error messages or anything , but later it failed again at the Samsung screen. Desperately I still have a 4.2.2 FW (?) tries to flash as would go at first, but after about 5 minutes Odion did not load and I thought (?) : ' Hmm, nothing is happening so I just pull the USB cable '
Well, it looks like I repend this now, but do it right !
Now I get when I start the phone this error message:
' firmware upgrade Encountered an issue . please select recovery mode in kies & try again s3 '
Kies doesn't recognizes the S3 , so that falls ever completely gone and when I try to flash another FW ( Odion ) I get these error messages regardless of whether it is one part FW or three part FW...
(YES , Kies is getting away with Task Manager )
Pictures are from gyazo . com
229f1e68b9a51f3e2ea7b95b965aabda.png
990b65923175282c4fe64ef51c77b9c9.png
e9c3ecd1c33496209e8a762df058d8ab.png
What I have already tried:
- Flash different FW
- To use other USB ports ( I have all 12)
- To install USB drivers multiple times
Anyone can help?
:crying:
Gehirnstaub said:
Hi there! I sit now beaten four hours (or more :crying on a S3 from a friend because he only had the problem that his S3 is not started ( Freeze the Samsung logo). He was eager that I should remove it its unwanted root access. After research I managed the S3 HALF WAY up and running or that the phone started normally. Luckily CWM was installed on the device...
Well , later I have downloaded an original 4.3 Unbranded FW and flashed using Odion . ( Drivers and other stuff was already on it ) So far so good . There were no error messages or anything , but later it failed again at the Samsung screen. Desperately I still have a 4.2.2 FW (?) tries to flash as would go at first, but after about 5 minutes Odion did not load and I thought (?) : ' Hmm, nothing is happening so I just pull the USB cable '
Well, it looks like I repend this now, but do it right !
Now I get when I start the phone this error message:
' firmware upgrade Encountered an issue . please select recovery mode in kies & try again s3 '
Kies doesn't recognizes the S3 , so that falls ever completely gone and when I try to flash another FW ( Odion ) I get these error messages regardless of whether it is one part FW or three part FW...
(YES , Kies is getting away with Task Manager )
Pictures are from gyazo . com
229f1e68b9a51f3e2ea7b95b965aabda.png
990b65923175282c4fe64ef51c77b9c9.png
e9c3ecd1c33496209e8a762df058d8ab.png
What I have already tried:
- Flash different FW
- To use other USB ports ( I have all 12)
- To install USB drivers multiple times
Anyone can help?
:crying:
Click to expand...
Click to collapse
Try flashing the latest rom for GT-I9300 International Version(Check if yours is international version) I9300XWUGML4 using odin.
After you installed the ROM from odin. Immediately hit Power + Volume Up + Home Button. Access recovery mode hit Factory Data Reset.
Related
Hello Thr ,
I am in a bit of a problem
I have Kies installed - Version 2.0.1.11053_99
Windows 7
Galaxy S2 - I9100DDKE2 ( PDA:KE8/PHONE:KE2/CSC:KE2(INU)
which i bought from INDIA two weeks back .
Now i am in South Africa when i connect it to Kies here , i am getting a popup which says that a Firmware Update is available.
Latest Firmware Version shown is
PDA:KF3/PHONE:KE4/CSC:KF3(INU)
Now when i start the Upgrade process , it fails to download the Firmware update and shows me the error :
"Error found in the downloaded file.Do you want to try downlaiding again ?"
and if i click YES then the same thing happens again .
I was using this Kies on the same laptop for my Galaxy S(SGS 1) before and never got an issue with it.
This is happening numberous times and i am not sure whether it is due to my phone being from India and that i am trying to upgrade it here in South Africa or
actually something with Samsung South Africa .
Can any one please explain to me what is happening and how do i Fix this now.
P.S.- not going to either use a ROM or Root it myself options ...
Many Thanks
Poor internet connection turn off AV and firewall .
jje
Thanks Will try it tomm,
Strange i never faced this sort of a problem with my Galaxy S ..
U think it has nothing to do with the fact that my phone was bought in India and that i am now in South Africa?
failed to run firmware upgrade unknown error occured
OK so still getting the Error
I have tried to reinstall the Samsung Kies again on my laptop.
"failed to run firmware upgrade unknown error occurred"
see i was facing same pro before i try numbers of time and alt last i succeeded wht i do it sounds pretty odd dont let your windows stay ideal for more then 45 sec it let the download interrupt try tht method u will be able to download the updates best of luck
Can u please elaborate where u were facing this issue and what ur firmware version is .
Also did u buy the phone in India and used it elsewhere or not?
what is happening in my case is that the download keeps failing and everytime i start it again , it goes a little further so in about 5-6 attempts it reaches 100%. and then when it tries to update the device with it , it fails to say that the downloaded file is corrupt or has an error or something like it.
Guyz please help !!!
help please----Galaxy S2 experts..
Guyz do help me please. i have tried reseting my phone and reinstalled kies a number of times now...
nothing seems to be working,,,,and now worse enuf all Kies does it says that the update is available and i click YES and then it just looses connection with the phone and reconnects again and again keeps giving me the update available popup ....what to do?
Looking at how the connection is being made, I'd refute the USB drivers problem and would rather resort to ODIN for FW install. Its fairly easy to use, if you are still able to get into Download/Recovery mode. The help on ODIN is spread all across the forum, let me know if you would still need any help on ODIN part....KIES is usually found to behave irrationally while upgrading firmware.
Thanks for coming to my help.
You see i am a little scared of using ODIN since i only bought this phone a week ago and don't want to mess up the warranty or future updates etc.
If i do use Odin (i have used it before for my galaxy S) , does it void my warranty or anything like it?
also will i be able to use Kies for future updates or would i always have to use ODIN from then onwards?
Finally , what sort of issues can i run into since i bought this phone in India and am now using this in SA?
Any help is appreciated.
Well, ODIN doesn't really void the warranty as you could always flash the country-specific firmware and flash the download counter too with the help of a small USB JIG (available for a minimal price at e-bay). If you really want to go down the KIES road, you might want to try a different system, cable/USB port (yes, it sometimes is the culprit) and see how it treats you then. If it still fails to do its assigned job, I think ODIN is the way to go...I have had 2 SGS and now SGS2 and never once did I go with KIES, well I tried once but it didn't go too well...since then ODIN is what I love. You can use KIES afterwards if you wish to, provided it has the country specific FW, so if you bought it from India, it should reflect the FW of India (seems like FW is mapped somehow with the IMEI).
Regarding your last, you shouldn't really bump into any roadblocks, should you find yourself in a soup, XDA fraternity would come to your rescue. Read thoroughly and proceed.
Any update on how did it go?
Sorted ,,,actually tried it on Win Xp and after two failures with decompressing binary files it went thru the third time
Seems like Win 7 didn't like my brand new galaxy S2
Hello ,
I have a problem with upgrading my SGA to an official firmware via Samsung Kies
when I start upgrading its OK , But after a few minutes , the Downloading come and it keeps downloading and nothin happen after this , it keeps downloading and I waited for more than 30 minutes and it keeps downloading
I tried three times , 2 times yesterday and now and I need to remove the battery and turn on the device to work again
is there a problem with my device ??
NOTE:
My device has android 2.2.1 ROOTED
so do I need to Unroot and try again ??
Afaik u dont need to unroot to update via kies. Please someone correct me if im wrong.
Thing is, kies already knowned as troublesome and laggy software/tools. If u know what update u will get via kies, just search for that particular update/rom on samfirmware and use odin to flash ur device. If i remember correctly, there are user that bricked their ace when upgrading via kies. For backup purpose, kies can do just fine, but for upgrade, i wouldnt even think of using kies because already got trustworthy odin by my side
Sent from your phone
omaar97 said:
Hello ,
I have a problem with upgrading my SGA to an official firmware via Samsung Kies
when I start upgrading its OK , But after a few minutes , the Downloading come and it keeps downloading and nothin happen after this , it keeps downloading and I waited for more than 30 minutes and it keeps downloading
I tried three times , 2 times yesterday and now and I need to remove the battery and turn on the device to work again
is there a problem with my device ??
NOTE:
My device has android 2.2.1 ROOTED
so do I need to Unroot and try again ??
Click to expand...
Click to collapse
Lesson learnt: Don't ever use Kies XD
Download ODIN 4.38 and the 2.3.3 ROM from samfirmware.com .
Flash the 2.3.3 with ODIN when your phone is in Download Mode .
When it successfully flashes , it's DONE !
Thanks for everyone , I won't use Kies after this day , I will update it now via ODIN
Hello gurus,
I am stupid.
I did not backup my Firmware.
I did not even look at what version it is...
Was so in a hurry to install Litening Rom 6.1
Now I have a pb.
Flashed via ODIN failed.
now I get Screen of death.
I can connect to ODIN and it recognizes the phone.
What do I need to flash ?
I tried few things... but didn't work.
I even tried to play around with the files... and found that the
problem is that sbl.bin and boot.bin seem to be protected...
whenever they are present in the file I am flashing ,I get an failed.
But when I remove those 2 files from the tar file , then It flashes normally , no error... but the phone does not boot... gets stuck at the Samsung I9100G writing screen.
Please help.. the phone is not mine ! It is a friend's ! Silly me right ?
Thanks for your help.
Can you enter to download mod ?
1. Take off the battery during 5 minutes
2. Your phone will be disconnected at your computer
3. Download the driver of your phone and install it
4. Take ON your phone and try to enter to the download MOD
5. Now you can connect your phone to Odin and normaly your computer recognize your phone
it worked for me and i hope it will be the same for you.
My problem is what firmware I should install !!!!
the PC recognizes the Phone already !!
Stock firmware for i1900 G is what you require .
jje
And I can find this where please ?
where do you live ?
Have you disconnected your phone at your computer before try to enter in download mod ?
Try that, take off the battery and press Volume down and Home, now plug the battery.
Normaly you enter to download mod.
pierreammoun said:
And I can find this where please ?
Click to expand...
Click to collapse
TRY the search button .Or even GOOGLE .
Might even be a 1900 G thread .
jje
I posted in your other thread in "Android Development", didn't see this one here.
Get your firmware from http://www.sammobile.com/!
Hello!
First I want to tell you that are new on this forum and wish you a Happy New Year!
I am the owner of a GT-I9100 Samsung S2 Galaxy a few months, was branded by Orange Romania.
Yesterday I wanted to make him ROOT indicated in the forum they have found.
Everything went well the first step, with Odin, after restarting my phone remained on the screen S2 Galaxy <Samsung GT-I9100> and below yellow triangle with an exclamation mark.
I went to step 2, .... and <Waiting SuperOneClick device> after 10 minutes nothing happened .... so remained.
I clicked on the window and he appeared in the top left corner, after the program name (Not Response), that something is stuck somewhere.
I tried to resume operations, but without succes.
Can anyone tell me how to flash it or how I can put a ROM you can use something?
All I can tell you is that Kies was the last version and the phone was updated daily by Kies. (Unfortunately not noted version)
You advised me to do?
What I have to say is that in some versions of ROM writing software gives me error and squares is red. (That in ODIN).
Thank you in advance.
Your best bet is to start again from the beginning. You can find branded and unbranded firmware here...
Unbranded firmware
Branded firmware
Flash one of them using Odin (as instructed in the thread where you download), but make sure that nothing associated with Kies is running. (Open task manager, look at processes and kill everything that begins with kies.)
Once your phone is working okay, to root just use this very simple method...
Easy Rooting Toolkit
First of all does your computer have the Samsung drivers installed and/or adb drivers?
If you want to root the easiest way is to flash a kernel, cf root is recommended for rooting you can flash this via odin.
This will give you Cwm recovery so you can flash roms via recovery on your phone.
Sent from my GT-P7510 using Tapatalk
nikzDHD said:
First of all does your computer have the Samsung drivers installed and/or adb drivers?
Click to expand...
Click to collapse
He's been updating it with Kies
x.shadowman.x1 said:
Hello!
Yesterday I wanted to make him ROOT indicated in the forum they have found.
Everything went well the first step, with Odin, after restarting my phone remained on the screen S2 Galaxy <Samsung GT-I9100> and below yellow triangle with an exclamation mark.
I went to step 2, .... and <Waiting SuperOneClick device> after 10 minutes nothing happened .... so remained.
Thats a very old method if you read the instructions its no longer in use .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Flash stock rom via ODIN.
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Guys ... do not laugh at me, but now another problem arose.
First I want to thank those who have answered me.
So ... let me tell you. Finally I managed to pass the problem occurred, but now appeared to me another. I managed to i9100XWKDD_i9100XXKDH_i9100OXXKDC_HOME.TAR satrec error and install the phone.
All well and good SWITCH only lasted a lot, about 15 minutes after the restart after installation.
Once started I did a hard reset.
At the start I have seen a lot of lines written in red so a lot of errors.
Finally they did not want to restart my phone, I only appear GT-I9100 Samsung Galaxy SII and NO yellow triangle.
Did not want to do anything. After about 10 minutes I decided to try again with Odin. Now it's surprise, the ODIN not want to recognize my phone ..... can not do anything with phone ODIN!!
When the download get in step (volume down + home + power) Were it says "current binary: OFFICIAL SAMSUNG" is this a problem? Before there was writing "binary power: CUSTOM"
Unfortunately the PC does not recognize the phone when the USB stick, I say it's not recognized.
What can I do?
Can I do anything with it at home? Or should it go on it for service?
What would I be able to attempt to revive it?
Once again thank you in advance.
x.shadowman.x1 said:
Guys ... do not laugh at me, but now another problem arose.
i9100XWKDD_i9100XXKDH_i9100OXXKDC_HOME.TAR satrec error and install the phone.
Thats very very old out of date firmware and out of date method .
When the download get in step (volume down + home + power) Were it says "current binary: OFFICIAL SAMSUNG" is this a problem? Before there was writing "binary power: CUSTOM"
Can I do anything with it at home? Or should it go on it for service?
What would I be able to attempt to revive it?
If its rooted then no warranty .
QUESTION
Can you get to either recovery mode or download mode .
Will ODIN show when in download mode and connected with Samsung usb cable a yellow connected bar top left .
jje
Click to expand...
Click to collapse
@ JJEgan-thank you.
version is old, but was the only one who can get me to install the phone to ODIN.
in ODIN, is not left anything yellow, all fields are empty.
is strange that neither you put your PC does not recognize USB cable in, it says USB DEVICE is not recognized.
I am desperate.
Fault of phone or USB drivers on PC .
Guess its a part flashed firmware f888 up phone .
jje
Hi!
It seems that the PC recognizes other devices when connected.
The only explanation is that something happened in the phone.
In order to reboot, I only appear in red script.
It seems only able to make phone to communicate with any PC.
The only way is to make micro SD card.
At the "Volume Up + HOME + POWER" gives me the opportunity to do reboot or update using the SD card.
Can anyone explain to me how to do? And we need that?
Thank you.
s5839i bootloop
hello !! so i have a problem. my samsung galaxy ace s5839i it's a bootloop!! first thing i tried was to wipe cache and because that didn't work i wiped also all data!! but still nothing. after that i searched and found that i need to reinstall the firmware . i had some problems going in the download menu , but i manage to get there. now the problem is that odin doesn't recognize it because also my computer doesn't or at least i think that is the reason odin doesn't see it!!! i've also downloaded and installed kies and usb samsung driver but still nothing!!
any idea on what i can do about this?! about how to make my computer and odin to see the phone? or another solution on how to escape from this bootloop?!
thx!
cristitache89 said:
hello !! so i have a problem. my samsung galaxy ace s5839i it's a bootloop!! first thing i tried was to wipe cache and because that didn't work i wiped also all data!! but still nothing. after that i searched and found that i need to reinstall the firmware . i had some problems going in the download menu , but i manage to get there. now the problem is that odin doesn't recognize it because also my computer doesn't or at least i think that is the reason odin doesn't see it!!! i've also downloaded and installed kies and usb samsung driver but still nothing!!
any idea on what i can do about this?! about how to make my computer and odin to see the phone? or another solution on how to escape from this bootloop?!
thx!
Click to expand...
Click to collapse
so now finaly made the computer see my phone but came another problem!!
so i used odin to try to reinstall the firmware , i found pit totoro_0623, some vodafone stock firmware for the pda, modem and csc and for the bootloader i could not find !!so i hit start , working ok finishing the job and after the phone restarted but it is stuck in appling multi csc and nothing is happening!! any idea ? what i can do?
so i finaly i succeeded to install the firmware by using odin 3.07 and S5839IXXLK3_S5839ILPMLL1_LPM in the PDA button , only this!!! but now it is stuck on the "samsung galaxy ace gt-s5839i " screen and nothing is happening . i'll keep it for another 30 min to see if something is happening !! is you have any idea , please reply!!!