Hello ,
I have a problem with upgrading my SGA to an official firmware via Samsung Kies
when I start upgrading its OK , But after a few minutes , the Downloading come and it keeps downloading and nothin happen after this , it keeps downloading and I waited for more than 30 minutes and it keeps downloading
I tried three times , 2 times yesterday and now and I need to remove the battery and turn on the device to work again
is there a problem with my device ??
NOTE:
My device has android 2.2.1 ROOTED
so do I need to Unroot and try again ??
Afaik u dont need to unroot to update via kies. Please someone correct me if im wrong.
Thing is, kies already knowned as troublesome and laggy software/tools. If u know what update u will get via kies, just search for that particular update/rom on samfirmware and use odin to flash ur device. If i remember correctly, there are user that bricked their ace when upgrading via kies. For backup purpose, kies can do just fine, but for upgrade, i wouldnt even think of using kies because already got trustworthy odin by my side
Sent from your phone
omaar97 said:
Hello ,
I have a problem with upgrading my SGA to an official firmware via Samsung Kies
when I start upgrading its OK , But after a few minutes , the Downloading come and it keeps downloading and nothin happen after this , it keeps downloading and I waited for more than 30 minutes and it keeps downloading
I tried three times , 2 times yesterday and now and I need to remove the battery and turn on the device to work again
is there a problem with my device ??
NOTE:
My device has android 2.2.1 ROOTED
so do I need to Unroot and try again ??
Click to expand...
Click to collapse
Lesson learnt: Don't ever use Kies XD
Download ODIN 4.38 and the 2.3.3 ROM from samfirmware.com .
Flash the 2.3.3 with ODIN when your phone is in Download Mode .
When it successfully flashes , it's DONE !
Thanks for everyone , I won't use Kies after this day , I will update it now via ODIN
Related
Hi,
Last week i got my Galaxy S2 and am really obsessed with the performance and beauty of her.
Today i installed lastest version of Kies and when i connected my phone thru USB, it said that new version of firmware is available (KF3).
I clicked OK to upgrade the firmware and it showed downloading firmware and after some time it said that "Failed to convert to upgrade mode" and i tried upgrading my firmware for 5-6 times but no luck..
Any one here know how to update the firmware to KF3 (INDIAN version)
Turn OFF AV and Firewall .
jje
thanks mate...but i tried but no luck....
Try resetting your phone to factory settings.Sometimes there are certain apps which interrupt the upgrade procedure. Needless to say, Do backup all your data and apps
better you would use odin to flash a rom.
Make sure you installed KIES in administrator mode.
Somehow i followed the steps given by you guys and able to successfully download the firmware. but after some time Kies showed some error in unknown language ( i think its korean) with only OK button (dont have a screen shot though).....now my phone was showing a little android guy with "Downloading....do not turn off target".....i waited for nearly 1.5 hrs and nothing happend...then i searched in net, there it asked me to power off the phone and switchng it on again.....
it came back online as usual and when i cheked the version it was still showing my old one.....any idea what went wrong? and what the heck is that error message, written like a chopstick house......
Solved
i had faced similar isssues while trying to upgrade for last 2 days.
it worked today - all i did was start Kies in Administrator mode.
kies didnt download the firmware again - it took it from previous downloads and did the upgrade.
try it out!
rb69 said:
Solved
i had faced similar isssues while trying to upgrade for last 2 days.
it worked today - all i did was start Kies in Administrator mode.
kies didnt download the firmware again - it took it from previous downloads and did the upgrade.
try it out!
Click to expand...
Click to collapse
I have been trying to download the new firmware since last 3 days, I even reset the phone back to factory setting, also using Kies in Administrator mode but everytime I click on the option of firmware upgrade it does the back up but after that it says "connection to Gt-i9100 lost ".
Any idea why this would be happening ?
Also any noticeable difference after the update ?
abhi021 said:
I have been trying to download the new firmware since last 3 days, I even reset the phone back to factory setting, also using Kies in Administrator mode but everytime I click on the option of firmware upgrade it does the back up but after that it says "connection to Gt-i9100 lost ".
Any idea why this would be happening ?
Also any noticeable difference after the update ?
Click to expand...
Click to collapse
Any solution on this ?
abhi021 said:
I have been trying to download the new firmware since last 3 days, I even reset the phone back to factory setting, also using Kies in Administrator mode but everytime I click on the option of firmware upgrade it does the back up but after that it says "connection to Gt-i9100 lost ".
Any idea why this would be happening ?
Also any noticeable difference after the update ?
Click to expand...
Click to collapse
earlier i did the factory reset (including USB erase) plus re installed USB drivers from Kies menu few times at home but it was not upgrading.
Just reconnected on a different machine (as was trying sitting at work ) it just worked. Yesterday I did face teh same issue at work machine as well.
most likely it looks to me either a USB driver issue and / or admin issues.
Hope it helps.
yet to come across any significant improvement changes. still in the mode of re installation of apps.
I tried everything...did factory reset, ran kies in admin mode etc....but still no luck.....can i use odin to update my firmware? if i update now using odin, can i update the next release of updated firmware with kies?
rb69 said:
Solved
i had faced similar isssues while trying to upgrade for last 2 days.
it worked today - all i did was start Kies in Administrator mode.
kies didnt download the firmware again - it took it from previous downloads and did the upgrade.
try it out!
Click to expand...
Click to collapse
i had the same thing happening to me!
when i updated from ke1 to ke7 , and when i updated from ke7 to kf3>
i hate kies
People seem to regularly have problems with Kies. My biggest one is getting the firmware to download: it often times out more than half-way through, eating up big chunks of my broadband data cap every time.
Odin is usually the most reliable way of doing a firmware update. Make sure you use the USB cable that came with the phone, because people have had problems using other cables (such as ones that come with HTC phones).
If you do a firmware update through Odin, it doesn't necessarily prevent later updates through Kies. The only thing you need to watch is that you're using a Kies-released firmware that's correct for your phone. For example, if you've got an Indian phone (GT-I9100LKAINU), you need to flash the XWKF3/ODDKF3/DDKE4 firmware. This is the latest Kies release for that phone. If you flashed a different firmware, such as the XWKF3/XEUKD1/XXKE7 firmware for European phones, Kies will no longer find updates.
You can use the Check Fus Downloader (v1.2 at fus.nanzen.se) to find the latest firmware for your phone, and to download an Odin-flashable package. This will give you a ZIP file, and inside that is a TAR file. This TAR file is then used by Odin.
SOLVED : [Q] SGS2 - Firmware Upgrade - Failed to Convert to upgrade mode
SOLVED...
used odin and downloaded the latest firmware zip from http://forum.xda-developers.com/showthread.php?t=1075278 ...took only 3 mins to do this work.....
thanks to all for helping me in this....
which firmware did you download~ seems there are lot dif version a/c to country. so not quite sure which one for me..help?
Hello Thr ,
I am in a bit of a problem
I have Kies installed - Version 2.0.1.11053_99
Windows 7
Galaxy S2 - I9100DDKE2 ( PDA:KE8/PHONE:KE2/CSC:KE2(INU)
which i bought from INDIA two weeks back .
Now i am in South Africa when i connect it to Kies here , i am getting a popup which says that a Firmware Update is available.
Latest Firmware Version shown is
PDA:KF3/PHONE:KE4/CSC:KF3(INU)
Now when i start the Upgrade process , it fails to download the Firmware update and shows me the error :
"Error found in the downloaded file.Do you want to try downlaiding again ?"
and if i click YES then the same thing happens again .
I was using this Kies on the same laptop for my Galaxy S(SGS 1) before and never got an issue with it.
This is happening numberous times and i am not sure whether it is due to my phone being from India and that i am trying to upgrade it here in South Africa or
actually something with Samsung South Africa .
Can any one please explain to me what is happening and how do i Fix this now.
P.S.- not going to either use a ROM or Root it myself options ...
Many Thanks
Poor internet connection turn off AV and firewall .
jje
Thanks Will try it tomm,
Strange i never faced this sort of a problem with my Galaxy S ..
U think it has nothing to do with the fact that my phone was bought in India and that i am now in South Africa?
failed to run firmware upgrade unknown error occured
OK so still getting the Error
I have tried to reinstall the Samsung Kies again on my laptop.
"failed to run firmware upgrade unknown error occurred"
see i was facing same pro before i try numbers of time and alt last i succeeded wht i do it sounds pretty odd dont let your windows stay ideal for more then 45 sec it let the download interrupt try tht method u will be able to download the updates best of luck
Can u please elaborate where u were facing this issue and what ur firmware version is .
Also did u buy the phone in India and used it elsewhere or not?
what is happening in my case is that the download keeps failing and everytime i start it again , it goes a little further so in about 5-6 attempts it reaches 100%. and then when it tries to update the device with it , it fails to say that the downloaded file is corrupt or has an error or something like it.
Guyz please help !!!
help please----Galaxy S2 experts..
Guyz do help me please. i have tried reseting my phone and reinstalled kies a number of times now...
nothing seems to be working,,,,and now worse enuf all Kies does it says that the update is available and i click YES and then it just looses connection with the phone and reconnects again and again keeps giving me the update available popup ....what to do?
Looking at how the connection is being made, I'd refute the USB drivers problem and would rather resort to ODIN for FW install. Its fairly easy to use, if you are still able to get into Download/Recovery mode. The help on ODIN is spread all across the forum, let me know if you would still need any help on ODIN part....KIES is usually found to behave irrationally while upgrading firmware.
Thanks for coming to my help.
You see i am a little scared of using ODIN since i only bought this phone a week ago and don't want to mess up the warranty or future updates etc.
If i do use Odin (i have used it before for my galaxy S) , does it void my warranty or anything like it?
also will i be able to use Kies for future updates or would i always have to use ODIN from then onwards?
Finally , what sort of issues can i run into since i bought this phone in India and am now using this in SA?
Any help is appreciated.
Well, ODIN doesn't really void the warranty as you could always flash the country-specific firmware and flash the download counter too with the help of a small USB JIG (available for a minimal price at e-bay). If you really want to go down the KIES road, you might want to try a different system, cable/USB port (yes, it sometimes is the culprit) and see how it treats you then. If it still fails to do its assigned job, I think ODIN is the way to go...I have had 2 SGS and now SGS2 and never once did I go with KIES, well I tried once but it didn't go too well...since then ODIN is what I love. You can use KIES afterwards if you wish to, provided it has the country specific FW, so if you bought it from India, it should reflect the FW of India (seems like FW is mapped somehow with the IMEI).
Regarding your last, you shouldn't really bump into any roadblocks, should you find yourself in a soup, XDA fraternity would come to your rescue. Read thoroughly and proceed.
Any update on how did it go?
Sorted ,,,actually tried it on Win Xp and after two failures with decompressing binary files it went thru the third time
Seems like Win 7 didn't like my brand new galaxy S2
Hi altogether,
i have an SGS2 and got an ofer to upgrade firmware via kies. I didnt flash or root anything with this phone yet.
After flashing the phone via kies i only get the problem picture: Phone-yellowtriangle-PC. AFAIK this is the sign you get, when the bootladers are corrupted. Am i right?
NEvertheless download mode is accessable, so i downloaded a stock firmware from this site and tried to flash it via odin. It connects, starts to flash, but wont go further than SBL1 for over 10 minutes. then i stopped flashing. I tried the same with just the kernel and it flashed correctly, and the phone restarts, but just to the SGS2-screen with a yellow triangle at the bottom. No further for over 30 minutes, so i canceled that too...
Any suggestions, how i can rescue the phone? Data is not important, i just want to get it running again...
try to use the files from the next thread:
http://forum.xda-developers.com/showthread.php?t=1075278
edit:
in addition try to preform a full wipe if the data is not important (will delete all data including the contacts)
Also make sure NO Kies related processes are running (Taskmanager -> "End Process" everything that even remotely sounds like anything containing "Kies").
Connect phone to another USB port and do not use a USB hub, connect the phone directely to the PC.
Maybe that helps a bit....
Thank you for your fast answer, but that is the guide i used first to flash a stock firmware. I maybe should have mentioned it. And thats the way it didnt work.
Just the single kernel worked out to cause a little positive result. But only seeing the start screen (not even bootlogo, and no further) is not what a phone should do.
genius5 said:
Hi altogether,
i have an SGS2 and got an ofer to upgrade firmware via kies. I didnt flash or root anything with this phone yet.
After flashing the phone via kies i only get the problem picture: Phone-yellowtriangle-PC. AFAIK this is the sign you get, when the bootladers are corrupted. Am i right?
NEvertheless download mode is accessable, so i downloaded a stock firmware from this site and tried to flash it via odin. It connects, starts to flash, but wont go further than SBL1 for over 10 minutes. then i stopped flashing. I tried the same with just the kernel and it flashed correctly, and the phone restarts, but just to the SGS2-screen with a yellow triangle at the bottom. No further for over 30 minutes, so i canceled that too...
Any suggestions, how i can rescue the phone? Data is not important, i just want to get it running again...
Click to expand...
Click to collapse
Don't use kies, its rubbish, when this is fixed just use ODIN Use the method in intratechs thread in the dev forum, using Odin
Sent from my Samsung Galactic Crusader S II
Hope someone can help. Recovery is accessable too?
As it was Kies i would take to a service centre .
jje
Great MAster Darkyy helped me, and gave me that advice too. I dont really understand, what exactly went wrong, but as no flashing worked....
i just build myself a JIG, reseted the counter and will send it to service now....
nevertheless TY for all your help and fast answers....
How can a global player like Samsung really keep crappy software like KIES on the market for such a long time??? Did it ever work???
genius5 said:
How can a global player like Samsung really keep crappy software like KIES on the market for such a long time??? Did it ever work???
Click to expand...
Click to collapse
No complaints to Samsung is probably why .
jje
Hello,
well 2 days ago I installed Chainfire3D , After installing the Chainfire3D's drivers my phone closed then my phone wa s freezing after the logo with a blackscreen, I could only see some light in the night , so after watching some tutorials now it's the freezing logo problem,
and I was trying to install a new rom but I need Odin for that I tried all versions of Odin but my phone does not connect to my pc/Odin
Also tried it on other computers , Samsung Drivers are all installed also Samsung KIES , Is there a solution before I have to pay for it to repair?
(my phone is rooted) & installed Android 4.2.2
(also did everything with the chache,fqctory,& tried a lot..)
Please help, Thanks mertonixx(sorry for my bad engilish)
just to get sure: you mentioned that you have kies installed. Before connecting to odin have you killed kies and all its processes in taskmanager, because they cannot work at the same time (and as I know kies starts automatically at boot)?
and you are in download mode? (you did not mention that so i have to ask )
mertonixx said:
Hello,
well 2 days ago I installed Chainfire3D , After installing the Chainfire3D's drivers my phone closed then my phone wa s freezing after the logo with a blackscreen, I could only see some light in the night , so after watching some tutorials now it's the freezing logo problem,
and I was trying to install a new rom but I need Odin for that I tried all versions of Odin but my phone does not connect to my pc/Odin
Also tried it on other computers , Samsung Drivers are all installed also Samsung KIES , Is there a solution before I have to pay for it to repair?
(my phone is rooted) & installed Android 4.2.2
(also did everything with the chache,fqctory,& tried a lot..)
Please help, Thanks mertonixx(sorry for my bad engilish)
Click to expand...
Click to collapse
You have to kill Samsung kies from task manager in your computer than open odin and connect your phone.
If my post had helped you than please press Thanks button. It might be very little for you but VERY BIG for me.
THANKSS!!
Chaitanyapatel8880 said:
You have to kill Samsung kies from task manager in your computer than open odin and connect your phone.
If my post had helped you than please press Thanks button. It might be very little for you but VERY BIG for me.
Click to expand...
Click to collapse
I LOVE YOU !!!!!!!!!!!!!!!!!!!!!!!!!!!! Chain !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ,,, if i reainstall the rom should it work ? , thanks a lot!
mertonixx said:
I LOVE YOU !!!!!!!!!!!!!!!!!!!!!!!!!!!! Chain !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ,,, if i reainstall the rom should it work ? , thanks a lot!
Click to expand...
Click to collapse
Yes... You can flash any rom you want... all of them will work just fine...
Hey guys today I wanted to flash the stock firmware to my I9300 and when ever I put the phone in download mod and I connect it to the pc and run Odin v3.0.4 I never get anything in ID:COM. I waited for like 15 minutes and still nothing.
Denzof said:
Hey guys today I wanted to flash the stock firmware to my I9300 and when ever I put the phone in download mod and I connect it to the pc and run Odin v3.0.4 I never get anything in ID:COM. I waited for like 15 minutes and still nothing.
Click to expand...
Click to collapse
drivers installed? and kies stopped in the background processes?
If Odin is not working try a different version of |Odin its posted in Themes and Apps .