Hello everybody … I am a nooob for here …
Now I got a very BIG problem for my Moto Atrix Me860…
Things like that…
After I use the RDS to flash SBF to my Atrix Me860(without 4G version)
Unfortunately ….. It Bricked……
The screen show message …
SVF:105:1:2
Failed to boot 0x1000
And reboot continually….so that Atrix can’t connect to computer
So I can’t flash other SBF to Atrix
Does anyone have idea with this kind of Problem ….
Please I need any opinion to tell me how to do …
Please I want to save my Atrix …> <
As the devices is booting hold the volume up button, rhat sgould put it in rsd protocal or something like that then connect to pc and flash sbf.
Sent from my MB860 using XDA App
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
is the battery charged?
Tyro.Eh said:
As the devices is booting hold the volume up button, rhat sgould put it in rsd protocal or something like that then connect to pc and flash sbf.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
This should work. I had constant reboot cycle. To get into RSD I had to time holding the volume up button for when the reboot cycle started, before the green LED came on so that I could get to RSD. If you press the volume button at the wrong time it will reboot again.
could it be that you flashed a SBF to a ME860 and not a MB860?
tjjensen23 said:
is the battery charged?
Click to expand...
Click to collapse
Yes the battery has been charged~!
CaelanT said:
This should work. I had constant reboot cycle. To get into RSD I had to time holding the volume up button for when the reboot cycle started, before the green LED came on so that I could get to RSD. If you press the volume button at the wrong time it will reboot again.
Click to expand...
Click to collapse
Hey bor , you mean if I hold the volume up before the "Green LED " show up
I could get to the RSD mode ?? "Starting RSD protorcal....."
but I have been tried many many time ... no matter when I hold the volume up button ... It still reboot again and again ... ><
I think the problem is that Atrix "can not " get into RSD mode before it reboot ...
so that Atrix "can not" flash another SBF from computer ...
Does anyone have any idea for this problem ??
DarkRyoushii said:
could it be that you flashed a SBF to a ME860 and not a MB860?
Click to expand...
Click to collapse
ME860 but the SBF that I flash into Atrix is not for ATT version
OLYGC_U4_1.21.0_SIGNED_OLYMPUSGCTEST_P013_HWolympu s_1g_Service1FF
Am I flash WRONG version ... ><
Does anyone can help me ?? QQ
Please I need any advice…
Thanks everyone…
power device off. hold vol down & power button it will load into fast boot use vol down key to you see android recovery press vol up to enter. Now to will see an andriod with an exclamation point press and the bottom right (its hiddin on top on the search key)
of the screen to bring up options and then vol to wipe data/factory reset and press the ok button to select.
It should work. " hiddin on top on the search key " It is hidden button, hope u can find.
power device off. hold vol down & power button it will load into fast boot use vol down key to you see android recovery press vol up to enter. Now to will see an andriod with an exclamation point press and the bottom right (its hiddin on top on the search key)
of the screen to bring up options and then vol to wipe data/factory reset and press the ok button to select.
not sure post for u or not. one more time for u.
Does anyone can help me ??
You have the answer above
Sent from my MB860 using XDA App
no used.
Does anyone can help me ??
Pull the battery, put it in, hold volume down, power on and continue holding volume down until you see Fastboot on the screen. Then you can go into RSD and then you should be able to use RSDLite to flash.
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Try holding volume down instead of up. If that doesn't work try it with the power button. Then you can get back to RSD protocol and flash the correct sbf to get you back working.
Sent from my MB860 using XDA Premium App
thanks for yout time
any more ideas?
I can't flash my rooted Droid RAZR because the phone goes on and off... I am trying to flash it before I send it over to Verizon... I don't know how to fix it! The phone's power button is slightly jammed or broken... I am not too sure. It just doesn't work... I don't know what to do... Fastboot isn't consistent some reason.... Any advice???
rbkchoi said:
I can't flash my rooted Droid RAZR because the phone goes on and off... I am trying to flash it before I send it over to Verizon... I don't know how to fix it! The phone's power button is slightly jammed or broken... I am not too sure. It just doesn't work... I don't know what to do... Fastboot isn't consistent some reason.... Any advice???
Click to expand...
Click to collapse
Do you know how to access Ap Fastboot menu?
power + vol up + vol down for 8s.
choose Ap Fastboot (vol down) then enter (vol up)
cheers
pedrotorresfilho said:
Do you know how to access Ap Fastboot menu?
power + vol up + vol down for 8s.
choose Ap Fastboot (vol down) then enter (vol up)
cheers
Click to expand...
Click to collapse
I do that but it doesn't go immediately to the next part after selecting Ap Fastboot. Then once I get it there, I try to use RSDlite and flash it, but then the phone will turn itself off or it some reason just blacks out for a while, then comes back on. When that happens, sometimes it goes a little further in the flashing, but usually stops. There's 18 steps and I usually get stuck at the 2nd step, sometimes at 5th, and 12th. Because it has tried to flash and stopped at those random steps, I can't turn the phone on anymore. Can only access the black and white menu...
I'm not sure, but i think that's because you don't have enough battery to flash it.
ericzhf said:
I'm not sure, but i think that's because you don't have enough battery to flash it.
Click to expand...
Click to collapse
It isn't the battery. Anyways, it is hooked up to my laptop when this happens
Hi Folks,
After running droid RAZR root unable to load OS the phone get stuck in this screen.
"AP fastboot Flash Mode (S)(Flash Failure)
0A.6C
To return to normal mode - first press power key to power down
Devise is locked , status code : 0
I pressed the power key + power to power down but its does not turn the RAZR normal mode.
Plz help.
Hope this guide helps.
http://forum.xda-developers.com/showthread.php?t=1539192
Hold both power key and the volume +,- key ,wait for device to turn off the screen and still hold the volume key without power key.and then selected the BP tools.Good luck.
Sent from my XT910 using xda premium
Hi everyone, as the title says I can't start de fastboot mode. After some problems trying to root my Atrix 4G and changing the firmware (to brasil retail) I decided to unlock the bootloader. First I flash the unlock.sbf without problems, but for the next step I need to start the fastboot mode to use the raiden's script. I tried holding power button & vol- but it starts in rsd mode. I also tried to remove and put the baterry and holding the volume buttons, quickboot app, reboot widget, root reboot, release the vol button when the led turns on or the motorola logo appears, I tried everything. Any solution? Thank you and sorry for my english.
I "T!"ink I know you...
Have you tried turning on the phone, release power button and then hold vol- button? Works for me (althrough i dont have problems if i hold both buttons)
Sent from my MB860 using xda app-developers app
I got a XT912 with a screen that stays black(don't know why, it looks fine). What i am trying to do, is to get into the fastboot mode without seeing anything so i can flash a stock rom via pc. Whatever combinations i try i only get it to reboot(it keeps saying "droooiiiidd"). I googled alot and i can't find a solution for this.
The reason why i want to flash a new rom is because i want to try if i can fix this screen issue and because the screen is locked and i can't get past that and use the phone(via otg and hdmi out).
How do i shut the phone down only using the keys(without restarting) and how do i start from a powered down mode into fastboot(step by step guide would be helpful).
Ensure phone is completely powered off (also, fully charged). Vol down + Power (vol down first). Release power button after 3-5 seconds, and then release vol down. You are now in fastboot. Connect usb, and your computer should identify the phone.
LuckiestNut419 said:
Ensure phone is completely powered off (also, fully charged). Vol down + Power (vol down first). Release power button after 3-5 seconds, and then release vol down. You are now in fastboot. Connect usb, and your computer should identify the phone.
Click to expand...
Click to collapse
What about selecting fastboot first? Isn't there some kind of menu i get into after doing that(at least i know there should be one)? Where i have to scroll down and select fastboot.
Holding vol up and vol down will bring you to the boot menu. Vol down is directly to fastboot mode.
Sent from my XT912
LuckiestNut419 said:
Holding vol up and vol down will bring you to the boot menu. Vol down is directly to fastboot mode.
Sent from my XT912
Click to expand...
Click to collapse
Can i somehow shut it down with the keys? I don't know why, but whatever i try it keeps rebooting only.
Press and hold both vol buttons and the power button for six to ten seconds. Then release all three. That is a manual reboot. A working screen will briefly flash. If you try to boot to the main boot menu, with vol +/-, and power, AP Fastboot is the third option. Press vol down twice to highlight ap fastboot, vol up once to select it. This also takes you to AP Fastboot mode, as opposed to the vol down and power, which is direct.
Sent from my XT912
LuckiestNut419 said:
Press and hold both vol buttons and the power button for six to ten seconds. Then release all three. That is a manual reboot. A working screen will briefly flash. If you try to boot to the main boot menu, with vol +/-, and power, AP Fastboot is the third option. Press vol down twice to highlight ap fastboot, vol up once to select it. This also takes you to AP Fastboot mode, as opposed to the vol down and power, which is direct.
Sent from my XT912
Click to expand...
Click to collapse
Thats what i tried just now, i pressed vol+/- and power to reboot. Soon after i pressed again vol+/- and power and waited for like 10 sec, then i pressed vol - 3 times and then vol + and all he did was reboot again damn. Is my timing wrong? 3 times down is wrong i guess if i start from position 1. Just as a reminder i can't see anything.
Volume down twice to highlight AP fastboot, up once to select. Also, you want the phone to be completely off to boot into fastboot mode. There is no way to REboot into the boot menu
Sent from my XT912
LuckiestNut419 said:
Volume down twice to highlight AP fastboot, up once to select. Also, you want the phone to be completely off to boot into fastboot mode. There is no way to REboot into the boot menu
Sent from my XT912
Click to expand...
Click to collapse
What i did now is open the back, disconnect the battery and connect it again, use vol down button + power button for ten sec and then plug it into the computer. Nothing happens, atleast not on the computer, the phone shows a white light in the top left corner. It stays on even if i disconnect the cable.
Holding for that long can cause a reboot. Try holding the vol down and power for like... three seconds, after reconnecting the battery. Also, are you using an OEM motorola cable? And, have you ever used RSDlite? Have you prepared for flashing with the appropriate fastboot sbf files? Once the computer recognizes the phone, you'll want to have the motorola drivers installed, RSDlite ready, and the right sbf file ready.\
EDIT
Even if you do access the fastboot menu, if the phone believes the battery is too low, it will not allow the pc and phone to connect. The screen should say:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OK to Program
Connect USB
Data Cable
I realize that your screen isn't displaying anything, but this menu is what will restrict you from flashing if the battery is low. Instead of Battery OK, it will say Low Battery
LuckiestNut419 said:
Holding for that long can cause a reboot. Try holding the vol down and power for like... three seconds, after reconnecting the battery. Also, are you using an OEM motorola cable? And, have you ever used RSDlite? Have you prepared for flashing with the appropriate fastboot sbf files? Once the computer recognizes the phone, you'll want to have the motorola drivers installed, RSDlite ready, and the right sbf file ready.\
EDIT
Even if you do access the fastboot menu, if the phone believes the battery is too low, it will not allow the pc and phone to connect. The screen should say:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OK to Program
Connect USB
Data Cable
I realize that your screen isn't displaying anything, but this menu is what will restrict you from flashing if the battery is low. Instead of Battery OK, it will say Low Battery
Click to expand...
Click to collapse
I know how to use rsdlite, because i flashed my xt910 with it. The battery could be a problem. I have it fully charged and will try it again now, but if that doesn't work i propably need a factory cable. I think i made it into the fastboot mode in previous tries but got stuck because of the battery status.
Edit: Reconnecting the battery and getting into fastboot mode seems to work, but connecting the cable gives me the white light and nothing else works.
So your computer is still not recognizing the phone, even when it seems to be in fastboot?
Sent from my XT912
LuckiestNut419 said:
So your computer is still not recognizing the phone, even when it seems to be in fastboot?
Sent from my XT912
Click to expand...
Click to collapse
Yep, no reaction from the os and nothing listed in adb devices or fastboot devices.
Assuming the battery power is adequate, the next and only solution is the proper data cable (OEM).
If the battery is low, you'll need to either use a TBH factory data cable, or the workaround of hard wiring a stripped usb cable screwed to the battery terminals on the phone. Once the phone identifies a good power source, it will allow a pc connection.
Sent from my XT912
EDIT
BP SBF Flash is the fourth option down, out of seven total, I believe. If you can boot to the main boot menu, and click vol down 3 times, you'll select this option. As I recall, I was able to confirm my phone, usb cable, and pc were all communicating. My *pc identified an unknown device being connected, even with a nearly dead battery. Then I knew I just needed a power supply. I'm not sure what this option is for, but it told me what I needed to know.
LuckiestNut419 said:
Assuming the battery power is adequate, the next and only solution is the proper data cable (OEM).
If the battery is low, you'll need to either use a TBH factory data cable, or the workaround of hard wiring a stripped usb cable screwed to the battery terminals on the phone. Once the phone identifies a good power source, it will allow a pc connection.
Sent from my XT912
EDIT
BP SBF Flash is the fourth option down, out of seven total, I believe. If you can boot to the main boot menu, and click vol down 3 times, you'll select this option. As I recall, I was able to confirm my phone, usb cable, and pc were all communicating. My phone identified an unknown device being connected, even with a nearly dead battery. Then I knew I just needed a power supply. I'm not sure what this option is for, but it told me what I needed to know.
Click to expand...
Click to collapse
Ok i will try that until i get one of these cables or adapters.
Is it possible to use adb via recovery or do i need a custom recovery for that? I am not sure if i need to unlock the bootloader via motorola( have to use fastboot for unlock), that would as far as i know reset the stock rom(if i need a custom rom).