I have Xperia mini rooted with ICS (sony official) and i think it just died.
The symptoms:
phone can't charging
Power on button has no effect at all (not even vibrate, LED is off when i conectin to charger )
While connected to PC, the hardware manager shows the "qualcomm hs-usb qdloader 9008"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
plz help
hi
i can fix it contact me on gtalk [email protected]
someone plz help me
why this is happened ? any solution !!
roxandn said:
I have Xperia mini rooted with ICS (sony official) and i think it just died.
The symptoms:
phone can't charging
Power on button has no effect at all (not even vibrate, LED is off when i conectin to charger )
While connected to PC, the hardware manager shows the "qualcomm hs-usb qdloader 9008"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
plz help
Click to expand...
Click to collapse
same problem here bro
Related
Hey guys!
Well, today I've installed BusyBox and Swapper 2 on my phone - LG Doubleplay (C729). I didn't change any settings. Then I wanted to restart it, so I turned the phone off, but it was no longer possible to turn it back on. Only black screen, no sound, no nothing. When I pull the battery out and connect the phone via USB, it registers as Qualcomm HS-USB QDLoader 9008. So my question is - what now?
Thanks for any help!
I have Xperia mini rooted with ICS (sony official) and i think it just died.
The symptoms:
phone can't charging
Power on button has no effect at all (not even vibrate, LED is off when i conectin to charger )
While connected to PC, the hardware manager shows the "qualcomm hs-usb qdloader 9008"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
plz help
roxandn said:
I have Xperia mini rooted with ICS (sony official) and i think it just died.
The symptoms:
phone can't charging
Power on button has no effect at all (not even vibrate, LED is off when i conectin to charger )
While connected to PC, the hardware manager shows the "qualcomm hs-usb qdloader 9008"
The Flashtool (version 0.9.10.1) says device disconnected
Phone does't go into flashmode (VOL down + USB connect)
plz help
Click to expand...
Click to collapse
I think you should have posted this in the Q&A section. Anyway you need to let us know what did you do to the phone that bricked it?
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same
Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?
Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.
Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920
SOLVED
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
vol - and power button press and try to enter in to fastboot...
A Q R I N said:
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
Click to expand...
Click to collapse
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
https://www.youtube.com/watch?v=KzNTxRVF0pI skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
android_smater said:
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
link skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
Click to expand...
Click to collapse
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
Rajat22 said:
vol - and power button press and try to enter in to fastboot...
Click to expand...
Click to collapse
Nothing happened when I press the vol ( - ) button with power button.
Tried to turn on the phone by pressing the power button only and phone is not booting
A Q R I N said:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking
Click to expand...
Click to collapse
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
android_smater said:
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
Click to expand...
Click to collapse
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
A Q R I N said:
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
Click to expand...
Click to collapse
Yes
---------- Post added at 04:09 AM ---------- Previous post was at 03:51 AM ----------
http://bigota.d.miui.com/V8.0.1.0.L...DG_20160805.0000.29_5.1_global_5e65360aff.tgz
Direct link
SOLVED Thanks guys !!!
A Q R I N said:
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
Click to expand...
Click to collapse
Please can you provide me the link to download the driver!
So I was looking around in TWRP, and foolishly, changed the system partition (changed from ext4 to ext3 I believe)..
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
so; no booting, no splash screen, nothing going on, except the green notification blip when holding hard-reset buttons. I've been searching online and saw some guys using a deep flash cable to short circuit the testing pins, does anyone have experience with this fix?
any help would be appreciated..!
Quince
QuinceDroid said:
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
Click to expand...
Click to collapse
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
jwoegerbauer said:
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
Click to expand...
Click to collapse
I am aware of that, however, my PC doesn't recognize the device when I try to enter EDL mode (Yes, i have installed the qualcomm USB drivers, QDloader, QPST, adb drivers etc)
I fixed it eventually with a Deep Flash cable [EDL] ! It was the only way to trigger the EDL mode. It's aliiive!!