Hello,
Did bootloader with intent to update my phone (WT18a) for CM10, follow some tutorials and installed using FlashTool, after appearing he was ready I rebooted the machine, the problem is that the home screen does not come out of the animation, anyone have any idea what possar be?
Sorry bad english.
Log:
22/046/2013 16:46:38 - INFO - <- This level is successfully initialized
22/046/2013 16:46:38 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
22/046/2013 16:46:38 - INFO - You can drag and drop ftf files here to start flashing them
22/046/2013 16:46:42 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
22/046/2013 16:46:42 - INFO - Device Status: FASTBOOT mode
22/046/2013 16:46:43 - INFO - Device connected in fastboot mode
22/046/2013 16:46:56 - INFO - Selected kernel (boot.img or kernel.sin): C:\Documents and Settings\xxxx\Desktop\boot.img
22/046/2013 16:46:56 - INFO - Flashing selected kernel
22/046/2013 16:46:58 - INFO - sending 'boot' (4922 KB)...
22/046/2013 16:46:58 - INFO - (bootloader) USB download speed was 9214kB/s
22/046/2013 16:46:58 - INFO - OKAY [ 0.548s]
22/046/2013 16:46:58 - INFO - writing 'boot'...
22/046/2013 16:46:58 - INFO - (bootloader) Download buffer format: boot IMG
22/046/2013 16:46:58 - INFO - (bootloader) Flash of partition 'boot' requested
22/046/2013 16:46:58 - INFO - (bootloader) S1 partID 0x00000003, block 0x00000148-0x00000179
22/046/2013 16:46:58 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
22/046/2013 16:46:58 - INFO - (bootloader) Flashing...
22/046/2013 16:46:58 - INFO - (bootloader) Flash operation complete
22/046/2013 16:46:58 - INFO - OKAY [ 0.986s]
22/046/2013 16:46:58 - INFO - finished. total time: 1.534s
22/046/2013 16:46:58 - INFO - FASTBOOT Output:
sending 'boot' (4922 KB)...
(bootloader) USB download speed was 9214kB/s
OKAY [ 0.548s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000148-0x00000179
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.986s]
finished. total time: 1.534s
22/046/2013 16:46:58 - INFO - Please check the log before rebooting into system
22/047/2013 16:47:00 - INFO - Finished Fastboot Toolbox
AW: Problem after trying to update device
Of course your home screen won't come up! You have to boot in cwm recovery and install the rom as a zip
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
Of course your home screen won't come up! You have to boot in cwm recovery and install the rom as a zip
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
First, thanks for the help.
I installed the kernel, entercwm recovery and install the rom as a zip, now never leaves the screen that appears Cyanogen (mod) 9, it's been 20 minutes.
Is it normal or something wrong may have happened?
Lycoz said:
First, thanks for the help.
I installed the kernel, entercwm recovery and install the rom as a zip, now never leaves the screen that appears Cyanogen (mod) 9, it's been 20 minutes.
Is it normal or something wrong may have happened?
Click to expand...
Click to collapse
Kernel information? U r stuck in bootloop, probably wrong kernel. Did u wipe ur phone? Try to instal CM9 kernel via flashtool.
Sent from my SK17i using xda app-developers app
Lycoz said:
First, thanks for the help.
I installed the kernel, entercwm recovery and install the rom as a zip, now never leaves the screen that appears Cyanogen (mod) 9, it's been 20 minutes.
Is it normal or something wrong may have happened?
Click to expand...
Click to collapse
Did u do the correct wipes?
Sent from my SK17i using Tapatalk 2
Problem solved.
Follow a clean install and it worked.
Goodmorning,
due to a lot of users have been confused in Gava97's thread,in this thread you can find all the steps to setup,configure,install and enjoy cyanogenmod 11.0 on xperia u
Let's start
Requires
Unlocked bootloader
Q : How to recognize if my bootloader is locked ?
A : Simple,if you didn't apported any modifies to your phone,it's obviously locked,but warning :
I'm not meaning that if you have root you are on unlocked bootloader because you can root also in locked bootloader
Q : How to unlock my bootloader ?
A : Follow instructions provided at THIS LINK
Once unlocked bootloader,download Flashtool : LINK
Now,download latest CyanogenMod 11.0 Nightly build : maclaw.pl
*** WAIT DOWNLOAD FINISHES ***
When download is finished,open the .zip file,and then extract the boot.img it in the desktop,then on desktop,create a folder named "kernel" and move the boot.img into it.
Now open Flashtool.exe and install all the required files for flash tool
Now go in C: > Flashtool and open "Flashtool Drivers.exe"
Connect your phone and enable usb debug : Settings - Developer Options - USB Debug
In Flashtool drivers.exe choose the following drivers
Xperia P/U/Sola and Go drivers
Flashmode drivers
Fastboot drivers
And wait that your pc installs all the required drivers
Now you're ready to use Flashtool !
Leave your device connected to computer
Now,go in desktop,or wherever you placed the .ZIP file and move it to your device :
Double click with the mouse on the zip file
Send to ...
Choose "Xperia U"
*** WAIT THAT COMPUTER MOVES THE ZIP INTO THE DEVICE ***
... Now ...
Open Flashtool.exe
Here you can find a image of flashtool should be like :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click on the flash icon,then select "Fastboot mode"
NOW LISTEN ME CAREFULLY
Disconnect your device from computer and power it off.
Now press the volume down button while connecting the usb cable to computer
If you're doing this correctly your phone's led should be blue.
Once connected,your computer will install all the drivers of fast boot mode (the same for flash mode),so wait 10/20 sec that your computer installs all required fast boot mode drivers
...Now...
On your computer,select the item "Select kernel to flash",then betake oneself (go) in the directory where you placed the .IMG file,or rather,the desktop,select the "kernel" folder,open it and choose to flash "boot.img",then click "Go" and wait that pc flashes the kernel
NOTE : Kernel flash procedure persists for about 2/3 seconds ! So be patient !
Congratulations,you flashed the kernel
Now we are going to install the .zip file !
Boot cwm
Q: How?
A: When the phone's showing the "SONY" logo,press continuously the volume down button,you should feel a vibration
Here's an image of how cwm should appear :
NOTE : Do not take care of the cam image,is took from gs3,so cam is a quite bit different !ù
Go on the "Wipe data / Factory reset" item
Go on the "Install zip from sdcard" item
Scroll in your files and choose the .zip file
*** WAIT THAT INSTALLATION FINISHES ***
Go on the "Install zip from sdcard" item
Scroll in your files and choose the gapps' .zip file
NOTE : GApps download link is here :- goo.im/gapps
Reboot
Congrats,you installed CyanogenMod 11.0 on your Xperia u
Now,a little guide on how to setup and configure it !
Go to Settings > About phone > Tap for 8 times the "Build Number" item ,due to get the performance/developer options
Go in performance and choose the governor "interactive",now go on frequences and choose "800 mhz" ( a little down clock to get more battery )
Go in developer options and then scale all animations to "0,5X",b ut if you want,you can also disable them by selecting the "None" item
LITTLE TRICK
Go in Settings > About phone > press continuously the "Android version" item,and see the magic U_U :
Congrats (again),you set up fine your CyanogenMod 11.0.
Q: Are you happy ?
A: Press thanks button
Great, thanks for the guide! I haven't done any flashing yet but it certainly interests me.
Good work @DroidModderXtreme
Because i can't write in main thread Xperia U Android Development category i have one question:
When You can add/include mod with repair SIM Card log?
This is from thread: This is from [MOD] [CM11] [U, Sola, P, Go Fix for PIN screen
Regards
Good guide but having faced the difficulties of unlocking bootloader and other stuff i recommend you please include use of xperia u toolkit in guide,it works like charm for people like me and simplifies unlocking bootloader.also you may add precaution step of downloading stock ics incase of bootloop.i had big headache when i had my 1st weeks ago
Sent from my Nexus 7 using xda app-developers app
if this for newbie maybe the bootloader unlocking part is a bit hard but i found this video on youtube its pretty easy its just take about 5 minutes if u already flashtool..here the linkhttp://www.youtube.com/watch?v=icScEjVUdH8&desktop_uri=/watch?v=icScEjVUdH8 well this video is not create by me well its good for newbie
ps:u can add to Op if u want
Sent from my Xperia U using xda app-developers app
Gismo_PL said:
Good work @DroidModderXtreme
Because i can't write in main thread Xperia U Android Development category i have one question:
When You can add/include mod with repair SIM Card log?
This is from thread: This is from [MOD] [CM11] [U, Sola, P, Go Fix for PIN screen
Regards
Click to expand...
Click to collapse
yes, it has included (in latest release by maclaw)
Enviado desde mi Xperia U mediante Tapatalk
please what about the update instructions? Thanks
DroidModderXtreme said:
Goodmorning,
.
.
.
Go on the "Install zip from sdcard" item
Scroll in your files and choose the gapps' .zip file
NOTE : GApps download link is here :- goo.im/gapps
Click to expand...
Click to collapse
Gapps Link does not have appropriate CM11 gapps. You could add this link instead. Google Apps for CyanogenMod
DroidModderXtreme said:
.
.
.
LITTLE TRICK
Go in Settings > About phone > press continuously the "Android version" item,and see the magic U_U :
Click to expand...
Click to collapse
Another little trick! Long press on the red Android screen, and see what happens!!!
Very simple guide! Nice one! :good::good::good:
Please reply
is bluetooth , Wifi are working good? and ram is stable or not ? please reply
@Z4Zeeshan - read this thread:
[ROM] [UB] [Kitkat] [4.4] CyanogenMod 11.0 NIGHTLIES.
Please reply
Gismo_PL said:
@Z4Zeeshan - read this thread:
[ROM] [UB] [Kitkat] [4.4] CyanogenMod 11.0 NIGHTLIES.
Click to expand...
Click to collapse
sorry bro i am noob please tell me can i use New release (20131221) of CM11.0 on xperia u and all the bluetooth and wifi bugs are fixed for xperia u in New release (20131221) of CM11.0 ???
In main thread user wrote:
Garcia98 said:
...
When you disconnect WiFi it cannot be activated without rebooting.
Click to expand...
Click to collapse
Unfortunately, for now it's true.
For Xperia U last version is: KitKat 4.4 (CyanogenMod 11.0) 20131213
Flashing nightlies
Hi,
Thanks a ton for the very useful post on flashing my mobile. My question is, if I am already on one nightly of CM11, do I have to do the all the steps again or can I just put the latest nightly zip in my mem card and flash in recovery mode? (I guess I also have to flash GApps again in either case)
Why is this posted here? should it not be posted in the XU forum?
cpkunki said:
Why is this posted here? should it not be posted in the XU forum?
Click to expand...
Click to collapse
Because here can write users which can't write in main dev thread. It is also a forum XU
Regards
Gismo_PL said:
Because here can write users which can't write in main dev thread. It is also a forum XU
Regards
Click to expand...
Click to collapse
Oh! Sorry. Forgot that!
Sent from my MT27i using XDA Premium 4 mobile app
I did everything the tutorial said but after flashing the new kernel when i want to enter the cwm mode something goes wrong.
After seeing the sony logo and pushed a lot at the buttom, i feel vibration, the sony logo dissapears and then, nothing happens (screen is still on, but shows nothing)
Here is my log from flashtool
23/024/2013 13:24:50 - INFO - <- This level is successfully initialized
23/024/2013 13:24:50 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
23/024/2013 13:24:52 - INFO - Device connected with USB debugging on
23/024/2013 13:24:53 - INFO - Connected device : Sony Xperia P
23/024/2013 13:24:53 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
23/024/2013 13:24:53 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
23/024/2013 13:24:53 - INFO - Checking root access
23/024/2013 13:24:54 - INFO - Root Access Allowed
23/025/2013 13:25:22 - INFO - Device disconnected
23/035/2013 13:35:39 - INFO - Device connected with USB debugging on
23/035/2013 13:35:39 - INFO - Connected device : Sony Xperia P
23/035/2013 13:35:40 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
23/035/2013 13:35:40 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
23/035/2013 13:35:40 - INFO - Checking root access
23/035/2013 13:35:52 - INFO - Root Access Allowed
23/037/2013 13:37:26 - INFO - Device disconnected
23/038/2013 13:38:29 - INFO - Device connected in fastboot mode
23/039/2013 13:39:45 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Brecht\Desktop\kernel\boot.img
23/039/2013 13:39:45 - INFO - Flashing selected kernel
23/039/2013 13:39:46 - INFO - sending 'boot' (8584 KB)...
23/039/2013 13:39:46 - INFO - (bootloader) USB download speed was 20781kB/s
23/039/2013 13:39:46 - INFO - OKAY [ 0.438s]
23/039/2013 13:39:46 - INFO - writing 'boot'...
23/039/2013 13:39:46 - INFO - (bootloader) Flash of partition 'boot' requested
23/039/2013 13:39:46 - INFO - (bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
23/039/2013 13:39:46 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
23/039/2013 13:39:46 - INFO - (bootloader) Flashing...
23/039/2013 13:39:46 - INFO - (bootloader) Flash operation complete
23/039/2013 13:39:46 - INFO - OKAY [ 0.592s]
23/039/2013 13:39:46 - INFO - finished. total time: 1.030s
23/039/2013 13:39:46 - INFO - FASTBOOT Output:
sending 'boot' (8584 KB)...
(bootloader) USB download speed was 20781kB/s
OKAY [ 0.438s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.592s]
finished. total time: 1.030s
23/039/2013 13:39:46 - INFO - Please check the log before rebooting into system
thcerb12 said:
I did everything the tutorial said but after flashing the new kernel when i want to enter the cwm mode something goes wrong.
After seeing the sony logo and pushed a lot at the buttom, i feel vibration, the sony logo dissapears and then, nothing happens (screen is still on, but shows nothing)
Here is my log from flashtool
23/024/2013 13:24:50 - INFO - <- This level is successfully initialized
23/024/2013 13:24:50 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
23/024/2013 13:24:52 - INFO - Device connected with USB debugging on
23/024/2013 13:24:53 - INFO - Connected device : Sony Xperia P
23/024/2013 13:24:53 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
23/024/2013 13:24:53 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
23/024/2013 13:24:53 - INFO - Checking root access
23/024/2013 13:24:54 - INFO - Root Access Allowed
23/025/2013 13:25:22 - INFO - Device disconnected
23/035/2013 13:35:39 - INFO - Device connected with USB debugging on
23/035/2013 13:35:39 - INFO - Connected device : Sony Xperia P
23/035/2013 13:35:40 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
23/035/2013 13:35:40 - INFO - Android version : 4.1.2 / kernel version : 3.0.8+ / Build number : 6.2.A.1.100
23/035/2013 13:35:40 - INFO - Checking root access
23/035/2013 13:35:52 - INFO - Root Access Allowed
23/037/2013 13:37:26 - INFO - Device disconnected
23/038/2013 13:38:29 - INFO - Device connected in fastboot mode
23/039/2013 13:39:45 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\Brecht\Desktop\kernel\boot.img
23/039/2013 13:39:45 - INFO - Flashing selected kernel
23/039/2013 13:39:46 - INFO - sending 'boot' (8584 KB)...
23/039/2013 13:39:46 - INFO - (bootloader) USB download speed was 20781kB/s
23/039/2013 13:39:46 - INFO - OKAY [ 0.438s]
23/039/2013 13:39:46 - INFO - writing 'boot'...
23/039/2013 13:39:46 - INFO - (bootloader) Flash of partition 'boot' requested
23/039/2013 13:39:46 - INFO - (bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
23/039/2013 13:39:46 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
23/039/2013 13:39:46 - INFO - (bootloader) Flashing...
23/039/2013 13:39:46 - INFO - (bootloader) Flash operation complete
23/039/2013 13:39:46 - INFO - OKAY [ 0.592s]
23/039/2013 13:39:46 - INFO - finished. total time: 1.030s
23/039/2013 13:39:46 - INFO - FASTBOOT Output:
sending 'boot' (8584 KB)...
(bootloader) USB download speed was 20781kB/s
OKAY [ 0.438s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.592s]
finished. total time: 1.030s
23/039/2013 13:39:46 - INFO - Please check the log before rebooting into system
Click to expand...
Click to collapse
which version of CM 11 you are installing ? (assuming you know this tutorial don´t focused on ROM CM 11 for xperia P)
Kobalto07 said:
which version of CM 11 you are installing ? (assuming you know this tutorial don´t focused on ROM CM 11 for xperia P)
Click to expand...
Click to collapse
I was trying to install the CM11 Nigthly 20. I know this isn't about the XP but I hoped someone here could help me because the XU and the XP are quite the same.
thcerb12 said:
I did everything the tutorial said but after flashing the new kernel when i want to enter the cwm mode something goes wrong.
After seeing the sony logo and pushed a lot at the buttom, i feel vibration, the sony logo dissapears and then, nothing happens (screen is still on, but shows nothing)
....
Click to expand...
Click to collapse
You made it very good and everything is ok. Wait a few minutes - max 10 - for the system to raise/start.
Regards
I tried installing [ROM] Unoficial Cyanogenmod CM 11 (Android 4.4 KitKat)
I followed the steps
1. extract boot.img from zip and flash them
2. reboot
So after i clicked Reboot device into system,there is no sony logo and neither i can enter the clockwork mode
PLEASE HELP!
16/015/2014 16:15:09 - INFO - FASTBOOT Output:
sending 'boot' (8892 KB)...
(bootloader) USB download speed was 21577kB/s
OKAY [ 0.438s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x0000d000-0x00014fff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 0.806s]
finished. total time: 1.244s
16/015/2014 16:15:09 - INFO - Please check the log before rebooting into system
16/015/2014 16:15:12 - INFO - Device will now exit fastboot mode and start booting into system
16/015/2014 16:15:12 - INFO - Device disconnected
16/015/2014 16:15:22 - INFO - Device connected with USB debugging off
16/015/2014 16:15:22 - INFO - For 2011 devices line, be sure you are not in MTP mode
16/015/2014 16:15:34 - INFO - Device connected with USB debugging on
16/015/2014 16:15:34 - INFO - Connected device : Sony Xperia P
16/015/2014 16:15:34 - INFO - Installed version of busybox : BusyBox v1.15.3 (2010-02-06 17:13:19 CET) multi-call binary
16/015/2014 16:15:34 - INFO - Android version : 4.0.4 / kernel version : 3.0.101-munjeni-g8aa9509 / Build number : 6.1.1.B.1.75
16/015/2014 16:15:34 - INFO - Checking root access
16/015/2014 16:15:34 - INFO - Root Access Allowed
Redo the process by flashing stock, then fastboot the kernel and make sure you press POWER BUTTON when the device vibrates, then you can follow the instruction given in CM 11 thread
Cheers,
AJ
Abhinav2 said:
Redo the process by flashing stock, then fastboot the kernel and make sure you press POWER BUTTON when the device vibrates, then you can follow the instruction given in CM 11 thread
Cheers,
AJ
Click to expand...
Click to collapse
Flashing stock you mean using flashmode to flash 6.1.1.b.1.75?If so i cant enter flashmode
The phone isn't turning on but connecting it and checking it on Flashtool shows this
16/006/2014 17:06:40 - INFO - <- This level is successfully initialized
16/006/2014 17:06:40 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
16/006/2014 17:06:45 - INFO - Device connected with USB debugging on
16/006/2014 17:06:46 - INFO - Connected device : Sony Xperia P
16/006/2014 17:06:46 - INFO - Installed version of busybox : BusyBox v1.15.3 (2010-02-06 17:13:19 CET) multi-call binary
16/006/2014 17:06:46 - INFO - Android version : 4.0.4 / kernel version : 3.0.101-munjeni-g8aa9509 / Build number : 6.1.1.B.1.75
16/006/2014 17:06:46 - INFO - Checking root access
16/006/2014 17:06:46 - INFO - Root Access Allowed
Could you please provide me the stuffs on how i can go back to the stock ?
There is no sony logo and niether is the phone charging
have you unlock your bootloader?
Deichz said:
have you unlock your bootloader?
Click to expand...
Click to collapse
Yes
Rgbm21 said:
Yes
Click to expand...
Click to collapse
just like abhinav2 said flash your stock rom
what do you mean by cant enter flashmode?
Deichz said:
just like abhinav2 said flash your stock rom
what do you mean by cant enter flashmode?
Click to expand...
Click to collapse
never mind :laugh: got it working
had to do this
Press and hold volume up button with powerbutton untill you've felt a vibration followed by a serie of vibrations and then try to connect it in flashmode
Thanks
Okay now i just unlocked bootloader using S1 Tools, and decided to flash a MIUI kernel for later ROM flashing use, the logs on the Flashtools shows OKAY but when re-booting it ends up boot loop
Here's my log from Flashtool:
26/037/2014 22:37:30 - INFO - <- This level is successfully initialized
26/037/2014 22:37:30 - INFO - Flashtool Version 0.9.12.1 built on 2013-06-04 22:50:00
26/037/2014 22:37:41 - INFO - Device connected with USB debugging on
26/037/2014 22:37:43 - INFO - Connected device : SonyEricson Xperia Neo V
26/037/2014 22:37:46 - INFO - Installed version of busybox : BusyBox v1.18.4 (2011-04-04 18:40:20 CDT) multi-call binary.
26/037/2014 22:37:46 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Build number : 4.1.B.0.587
26/037/2014 22:37:46 - INFO - Checking root access
26/037/2014 22:37:48 - INFO - Root Access Allowed
26/039/2014 22:39:37 - INFO - Please wait device is rebooting into fastboot mode (via ADB)
26/039/2014 22:39:53 - INFO - Device will soon enter fastboot mode
26/039/2014 22:39:54 - INFO - Device disconnected
26/042/2014 22:42:12 - INFO - Device connected in fastboot mode
26/042/2014 22:42:40 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\user\Desktop\Logs\boot.img
26/042/2014 22:42:40 - INFO - Flashing selected kernel
26/042/2014 22:42:44 - INFO - sending 'boot' (8716 KB)...
26/042/2014 22:42:44 - INFO - (bootloader) USB download speed was 22257kB/s
26/042/2014 22:42:44 - INFO - OKAY [ 1.044s]
26/042/2014 22:42:44 - INFO - writing 'boot'...
26/042/2014 22:42:44 - INFO - (bootloader) Download buffer format: boot IMG
26/042/2014 22:42:44 - INFO - (bootloader) Flash of partition 'boot' requested
26/042/2014 22:42:44 - INFO - (bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
26/042/2014 22:42:44 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
26/042/2014 22:42:44 - INFO - (bootloader) Flashing...
26/042/2014 22:42:44 - INFO - (bootloader) Flash operation complete
26/042/2014 22:42:44 - INFO - OKAY [ 1.690s]
26/042/2014 22:42:44 - INFO - finished. total time: 2.734s
26/042/2014 22:42:44 - INFO - FASTBOOT Output:
sending 'boot' (8716 KB)...
(bootloader) USB download speed was 22257kB/s
OKAY [ 1.044s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000280-0x000002e3
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.690s]
finished. total time: 2.734s
26/042/2014 22:42:44 - INFO - Please check the log before rebooting into system
26/043/2014 22:43:13 - INFO - Device will now exit fastboot mode and start booting into system
26/043/2014 22:43:14 - INFO - Device disconnected
Click to expand...
Click to collapse
Now my CWM changed into v6.0.28 instead of the one from pvy-Parts from Play store,
I did a recovery but it never worked
URGENT
EDIT 1: I need a way that can save everything on my phone, is that possible?
The kernel u flashed wont work with stock rom thats why u are facing bootloop... Just do all the wipes & flash MIUI rom then ur phone will boot...
If u want to get all ur files back, then simply flash stock kernel, backup all ur files, then flash miui kernel & the rom...
Sent from my MT11i using Tapatalk 2
i decided to mess around with my old wt19 so after unlocking the bootloader i wanted to install a custom rom. I have some experience with that so im not a complete newbie
I have flashed roms and unlocked bootloaders on multiple devices. I always read carefully instructions etc.
But this one gave me a headache.
After deciding to install a custom rom i had to unlock the bootloader. I had problems with fastboot recognizing the device but after an hour and a half of so of reading ad searching i managed to get it working and unlocked the bootlader.
After that i spent about 50 mnutes looking for a good kernel and after failing to flash one via fastboot i used flashtool to do it.
I used this guide
After seeing no errors i unplugged the phone and tried booting. I pressed power button, the phone vibrated but the screen was always black and nothing happened.
Long pressing power button did not reset, completely unresponsive, i had to pull the battery out to make it vibrate again uppon booting but same thing happened, no response. Flashtool no longer recognises the device the ledt doesnt light up when charging but the phone got hot during this time indicating itwas trying to do something.
After a short while,maybe the battery died, but even pulling out the battery and trying to boot again did not make any vibration indicating it was completely dead.
Kernel i flashed was kappa kernel
I tried booting to kernels cwm recovery but nothing happened.
SO im out of ideas
Any suggestions ?
This is the flashtool log
15/003/2018 16:03:43 - INFO - Flashtool Version 0.9.25.0 built on 17-06-2018 16:00:00
15/003/2018 16:03:43 - INFO - Searching for a web proxy
15/003/2018 16:03:44 - INFO - No proxy found, using direct connection
15/003/2018 16:03:44 - INFO - Syncing devices from github
15/003/2018 16:03:44 - INFO - Opening devices repository.
15/003/2018 16:03:44 - INFO - Scanning devices folder for changes.
15/003/2018 16:03:52 - INFO - Pulling changes from github.
15/003/2018 16:03:53 - INFO - Devices sync finished.
15/003/2018 16:03:53 - INFO - Loading devices database
15/003/2018 16:03:53 - INFO - Loaded 112 devices
15/003/2018 16:03:53 - INFO - Starting phone detection
15/003/2018 16:03:56 - INFO - Device disconnected
15/027/2018 16:27:11 - INFO - Device connected with USB debugging on
15/027/2018 16:27:11 - INFO - Connected device : SonyEricson Xperia Live Walkman
15/027/2018 16:27:11 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
15/027/2018 16:27:11 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Platform : 32bits / Build number : 4.1.B.0.587
15/027/2018 16:27:11 - INFO - Checking root access
15/027/2018 16:27:12 - INFO - Installing toolbox to device...
15/027/2018 16:27:12 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
15/027/2018 16:27:12 - INFO - Running installftkit as root thru sysrun
15/027/2018 16:27:13 - INFO - Root Access Allowed
15/027/2018 16:27:28 - INFO - Device disconnected
15/027/2018 16:27:56 - INFO - Device connected with USB debugging off
15/027/2018 16:27:56 - INFO - For 2011 devices line, be sure you are not in MTP mode
15/027/2018 16:27:58 - INFO - Device connected with USB debugging on
15/027/2018 16:27:59 - INFO - Connected device : SonyEricson Xperia Live Walkman
15/027/2018 16:27:59 - INFO - Installed version of busybox : BusyBox v1.18.5 (2011-07-18 07:43:28 PDT) multi-call binary.
15/027/2018 16:27:59 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-perf / Platform : 32bits / Build number : 4.1.B.0.587
15/027/2018 16:27:59 - INFO - Checking root access
15/028/2018 16:28:01 - INFO - Root Access Allowed
15/030/2018 16:30:40 - INFO - Now plug your device in Fastboot Mode
15/030/2018 16:30:48 - INFO - Device disconnected
15/031/2018 16:31:05 - INFO - Device connected in fastboot mode
15/031/2018 16:31:34 - INFO - Selected kernel (boot.img or kernel.sin): C:\adb\platform-tools\KaCoconut2.img
15/031/2018 16:31:34 - INFO - Flashing selected kernel
15/031/2018 16:31:36 - INFO - target didn't report max-download-size
15/031/2018 16:31:36 - INFO - sending 'boot' (5580 KB)...
15/031/2018 16:31:36 - INFO - (bootloader) USB download speed was 9186kB/s
15/031/2018 16:31:36 - INFO - OKAY [ 0.629s]
15/031/2018 16:31:36 - INFO - writing 'boot'...
15/031/2018 16:31:36 - INFO - (bootloader) Download buffer format: boot IMG
15/031/2018 16:31:36 - INFO - (bootloader) Flash of partition 'boot' requested
15/031/2018 16:31:36 - INFO - (bootloader) S1 partID 0x00000003, block 0x00000148-0x00000179
15/031/2018 16:31:36 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
15/031/2018 16:31:36 - INFO - (bootloader) Flashing...
15/031/2018 16:31:36 - INFO - (bootloader) Flash operation complete
15/031/2018 16:31:36 - INFO - OKAY [ 1.028s]
15/031/2018 16:31:36 - INFO - finished. total time: 1.657s
15/031/2018 16:31:36 - INFO - FASTBOOT Output:
target didn't report max-download-size
sending 'boot' (5580 KB)...
(bootloader) USB download speed was 9186kB/s
OKAY [ 0.629s]
writing 'boot'...
(bootloader) Download buffer format: boot IMG
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00000148-0x00000179
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 1.028s]
finished. total time: 1.657s
15/031/2018 16:31:36 - INFO - Please check the log before rebooting into system
15/032/2018 16:32:53 - INFO - Device disconnected
15/040/2018 16:40:18 - INFO - Now plug your device in Fastboot Mode
15/042/2018 16:42:29 - INFO - Failed
Click to expand...
Click to collapse