I have been attempting to access my tethering functionality on my rooted S3 (SGH-I747) for a few days now without success. I tried this process because it sounded promising but unfortunately I am unable to access settings.db using the SQLite Editor app.
When I click on the file the following error appears: An error occurred while opening the database. unable to open database file (code 14):, while compiling: SELECT * FROM sqlite_master WHERE type in('table','view') ORDER BY name.
I was thinking I might not be properly rooted but I verified my root status with the root checking apps. They confirm I'm rooted.
I'm running the stock Samsung ROM.
My APN settings are (I use Straight Talk as a provider):
NAME STRAIGHT_TALK
APN tfdata
MMSC http://mms-tf.net
MMS PROXY mms3.tracfone.com
MMS PORT 80
MMS_APN tfdata
MCC 310
MNC 410
Authentication type Not set
APN type Not set
APN protocol IPv4
APN roaming protocol IPv4
Turn APN on/off APN turned on
Bearer unspecified
Mobile virtual network operator none
I've tried other apps such as WiFi Tether for root users and WiFi Tether Router with no luck.
This is the thread I was following: http://forum.xda-developers.com/showthread.php?t=2544487
Does anyone have any idea of why I can't access settings.db?
Related
Sorry if posted before, I was not able to find it; but here are settings I found to work well from the stock ROM.
I recently installed Pampooh's ROSE ROM from here:
http://forum.xda-developers.com/showthread.php?t=483950
When I used the Network Setup Wizard for AT&T the settings would not work for me to access the internet or use MMS messages.
So I took the latest stock ROM - Cingular 3100/3125 v4.1.502.5 - WM5 AKU v3.4.2 from here:
http://rapidshare.com/files/53993022...0_cws_ship.rar
Re-installed it and noted the settings that DID Work and loaded them on Pampooh's ROM above. The result - it works! verified on both my SIM and my wife's SIM card (wife doesn't have a data plan - but has MMS messaging
Pampooh's ROM by default does not setup any network settings, so here are the settings needed to be added:
Settings->Connections->GPRS
Create new:
MEdia Net GPRS
Connects to: The Internet
Access point: wap.cingular
Username: [email protected] (CASE SENSITIVE)
Password: CINGULAR1 (CASE SENSITIVE)
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: (leave blank)
Settings->Connections->Proxy
Create new:
Cingular WAP
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port) wireless.cingular.com:80
Type: HTTP
Username: (leave blank)
Password: (leave blank)
{Pampooh's ROM had this already - but posted for information}
Now go to Messaging highlight MMS, select menu->settings->Menu->MMSC Settings
Name: Cingular MMS
MMSC URL: http://mmsc.cingular.com
WAP gateway: wireless.cingular.com
Port: 80
Connect Via: The Internet
Max sending size: 300K
All other defaults remain.
Enjoy,
~J
Thank you SO much for this post! I can't tell you how many months I've searched for this info...
Concerning DUTCH Vodafone users
When flashing: [ROM][WM 6.5] "Official" v1.00 [XIP/SYS 21854] and you place the sim-card in your phone it will start the connection setup to select you country and operator and it will do some vodafone settings.
These settings DOES NOT work. You CANNOT browse after that using GPRS.
Here are the correct settings which did the job for me, plz correct me if somethings is not correct, i'd verified these settings myselves:
HSDPA Switch: Turn on HSDPA (not off)
GPRS authentication on PAP (not CHAP)
Goto START -> Settings -> 6. Connections -> 5. GPRS ->
delete all entries: and create 3 entrys:
-Vodafone MMS
Connect to: vodafone MMS
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Office
Connect to: The Internet
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Push Mail
Connect to: Vodafone Push Mail
Access Point: push.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
Goto START -> Settings -> 6. Connections -> 6. PROXY ->
delete all entries: and create 3 entrys:
-Vodafone Office HTTP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:8799
Type: HTTP
username/password: empty
-Vodafone Office Sock
Connects from: Work
Connects to: The Internet
Proxy nameort: 127.0.0.1:8799
Type: SOCKS4
username/password: empty
-Vodafone Office WAP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:9201
Type: WAP
username/password: empty
(PROXYS ARE PROBABLE NOT NECCESARY!)
Goto START -> Internet Explorer -> Menu - Tools - Options - Connections:
Automaticlly detect settings: OFF
Select network: The Internet
When using Push Mail configure it using activesync or in windows 7 or higher with: Windows Mobile Device Center.
I'm open for questions and answers.
Good luck and sorry for bad english
Wuwa
the rundown...
flashed froyoman for the ideos onto the m835. booted fine but no web. used metroff for froyo, but no dice.
reflashed recovery but web was still gone
manually input apn's but wouldn't save settings. BUT as settings were input, web sig. started working until I tried to save when they erased.
these are the exact settings i need which came off my mom's m835 AND in the data/data/com.android.providers.telephony/databases/telephony.db/carriers folder
name:MetroPCS
APN: #777
proxy: proxy.metropcs.net
port: 3128
username: yourphonenumber at aaaj dot mymetropcs dot com
password: 699160
mmsc: h t t p : / mms dot metropcs dot net : 3128 slash mmsc
mcc: 311
mnc: 660
type: PAP or CHAP
apn type : *(astrix)
is it possible to push these in through adb and if so how?
I have access to another m835 that's not rooted, but i'll root it if i have to in order to gain access to all critical read only files...
oh and my build.prop says
"#begin volatile config
#end volatile config"
then switches between eclair and froyo after the #
that's not good is it? keep in mind that I'm nu to this and I'm going off a general hunch...
hi,
i have hcl me tablet u1 running android 4.0.3 ics and tried to connect to internet through 3g dongle i used HUAWEI e173 from operator etisalat egypt
when i connect it to the tablet there is nothing changed with the signal indicator and tried to put settings to the apn like that :
HTML:
1. Open Menu Settings Wireless controls Network
Mobile Networks Access Point Names
2. Press Menu New APN
3. Fill your parameters as shown below:
Name: Etisalat
APN: etisalat
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://10.71.131.7:38090
MMS Proxy: 10.71.130.29
MMS Port: 8080
MCC:
MNC:
APN Type: Internet
4. Press Menu, and then Save
5. Press Tick, next to etisalat to make it active
6. Press Back to return to the "Mobile network settings" screen
7. Probably optional: Select "Use only 2G networks
that was givin in this topic and there is nothing happen
please show me ho to make it work
and forgive me for my english
hi there
hi,
any help please??!!!!
i found these page " android pipip de/umts_howto php " ( change spaces with dots)
is this suitable for me or there is another good method . I'm new to the android world and don't no what to do
still no answer
any body plz
Ok. This is a weird one for me. I bought a EVO 3D off of Ebay with a bad ESN. I didn't care about the ESN since I was going to flash it over to Page Plus anyways. So, I flashed it and got everything running for it...except MMS. Talk, Text, & 3G works fine. I tried creating a default APN settings using giffgaffAPN since I couldn't get to the APN settings by going to Menu-Settings-Mobile Networks (option wasn't there). I put in what I found online as the default settings for the new APN. The APN didn't show up in the list but I didn't see the old APN either so I took it for granted that all was right in the world. I tried downloading a pic I'd received earlier via MMS and still nothing. I was still able to surf on 3G still. Can someone tell me what I'm doing wrong? Thanks!
OS: Android 4.03
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
mnomaanw said:
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
Click to expand...
Click to collapse
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
whodatdoug said:
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
Click to expand...
Click to collapse
I think I just figured out a step that I needed to put in. There's a field that says MMS Server URL that's just inside of the advanced menu that's a header like MMSC Setting. I put the MMSC URL into that field and I received those MMS messages that were previously just download. I need to try sending MMS messages now but unfortunately, last night, my SD card failed. I lost 16 gigs of pics (about 3k pics) and movies...including pics of the first time I held my son. Fortunately, most of those are on FB.
Thanks again for all of your help. Hopefully, when I get the new SD card in from IceMonkey.com ( Here's the one I'm getting and there's no referral link so I shouldn't get dinged for this ) and get some of the pics redownloaded, I can test out the send function on MMS.