when i go to install this i keep getting failed. it comes up skipping md5 check: no md5 file found. set_perm: some changes failed E:error executing updater binary in zip '/sdcard-exe/L error flashing zip '/sdcard-ext/liquid-jb-v2.9-official
any one know what this means?
anyone?
ciwboy9from0hell said:
when i go to install this i keep getting failed. it comes up skipping md5 check: no md5 file found. set_perm: some changes failed E:error executing updater binary in zip '/sdcard-exe/L error flashing zip '/sdcard-ext/liquid-jb-v2.9-official
any one know what this means?
Click to expand...
Click to collapse
If you are using SafeStrap recovery to flash the rom you can turn off the md5 check. You can probably do similar in other recovery apps, but I'm not familiar with them.
Sent from my XT912 using Tapatalk
Related
I Get A File From OTA Update Original For GT-I8190 In Folder /CACHE/OTA-Update/, But I Have Deleting Files delta.bin (35 Mb) Because Easy In Upload, I Already Tried Flash Stock Recovery And The Signature Verification Success But Installs Update My Firmware Failure (My Firmware Not Official / Custom). I Think The Signature Verification Can Use To Create File Root Flash From Stock Recovery.
Download ZIP Signature OTA Update
It's not only Signature Verification but also checksum involved.
Can it be edited to work?
tys0n said:
It's not only Signature Verification but also checksum involved.
Can it be edited to work?
Click to expand...
Click to collapse
I Also Think So. And I Hope Someone Can Make File Root Or The Other Flash From Stock Recovery.
Correct me if I'm wrong but that checksum looks like what md5 [file1 file2 etc] would spit out - the kind of thing you do when CWM can't restore your backup.
I was trying to update the CM 11 Rom that was on my phone but in the process of doing this it failed and now whenever I reboot it just boots straight into recovery. I've read about flashing a ROM with Odin but my windows 8 laptop isn't recognizing my phone even after getting the micro USB port on my phone replaced. It's charging just not being recognized!
Also when I tried to flash a ROM in recovery it says it fails
This is what comes up when flashing
Code:
Updating partition details
Installing '/external_sd/cm-11-20140407-UNOFFICI
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/extern
Error flashing zip '/external_sd/cm-11-20140407-
Updating partition details
Then when I click reboot system it says (this only happens if I try and flash a rom)
Fix superuser permissions?
Root permissions appear to be lost.
fix root permissions now?
(Fixes permissions on su binary & app)
Can someone help me fix my phone please
1st try flashing stock rom,then comment here
The .zip file of the ROM that you're trying to flash seems corrupted.
Try to get your phone recognized by Odin and flash a stock ROM into the phone.
Ok friends I Have an HTC one M7 that is Unlocked, rooted on TWRP 2.6, HBOOT 1.55 Running Custom Firmware from Android Rev HD 71.1 (4.4.2). The Problem is I haven't update my phone In a while, now im trying to update it to 4.4.3 or 4.4.4. I boot to TWRP and try flashing a current version of TWRP it gives me the error saying E: zip signature verification failed: 1 when I try to flash CM Nightly 11 for the m7 it says cant install this package on top of incompatible, (cant see what else it says) then it says error executing updater binary in zip/ error flashing zip.. what do I do with this?
FuTuRisTiC Zo3 said:
Ok friends I Have an HTC one M7 that is Unlocked, rooted on TWRP 2.6, HBOOT 1.55 Running Custom Firmware from Android Rev HD 71.1 (4.4.2). The Problem is I haven't update my phone In a while, now im trying to update it to 4.4.3 or 4.4.4. I boot to TWRP and try flashing a current version of TWRP it gives me the error saying E: zip signature verification failed: 1 when I try to flash CM Nightly 11 for the m7 it says cant install this package on top of incompatible, (cant see what else it says) then it says error executing updater binary in zip/ error flashing zip.. what do I do with this?
Click to expand...
Click to collapse
Try TWRP 2.6.3.3. If you are trying to update your phone you can not do that with a custom recovery! You need stock recovery, stock rom and possiblily some /preload/ apps that were erased during the unlock procedure.
majmoz said:
Try TWRP 2.6.3.3. If you are trying to update your phone you can not do that with a custom recovery! You need stock recovery, stock rom and possiblily some /preload/ apps that were erased during the unlock procedure.
Click to expand...
Click to collapse
No im trying to update Custom Rom Via TWRP, I jus tried flashing TWRP 2.6.3.3 and 2.7 it tells me that the signature verification check fails on both, im lost lol never had this problem.
FuTuRisTiC Zo3 said:
No im trying to update Custom Rom Via TWRP, I jus tried flashing TWRP 2.6.3.3 and 2.7 it tells me that the signature verification check fails on both, im lost lol never had this problem.
Click to expand...
Click to collapse
What custom rom are you trying to install?
Where did you get it?
Also, did you check the MD5 checksum to see if the download was corrupt?
im currently on Android Revo HD 71.1 trying to upgrade to CM 11 Nightly and I get everything from this site or the official site I don't know how to check the checksum to see if its bad.
majmoz said:
What custom rom are you trying to install?
Where did you get it?
Also, did you check the MD5 checksum to see if the download was corrupt?
Click to expand...
Click to collapse
Im am Currently on Android Revo HD 71.1 trying to update to CM 11 nightly and I get them from this site or the official sites but this is what it tells me when I try flashing 2.6.3.3
checking for MD5 file...
Skipping MD5 check: No MD5 file found.
Verifying zip signature...
E:zip signature verification failed: 1
then it says error flashing zip with the location of the file and what not
FuTuRisTiC Zo3 said:
Im am Currently on Android Revo HD 71.1 trying to update to CM 11 nightly and I get them from this site or the official sites but this is what it tells me when I try flashing 2.6.3.3
checking for MD5 file...
Skipping MD5 check: No MD5 file found.
Verifying zip signature...
E:zip signature verification failed: 1
then it says error flashing zip with the location of the file and what not
Click to expand...
Click to collapse
Since you are getting a signature error that means you are trying to install a file that is the wrong type for your phone. Are you getting this error in TWRP or on your computer?
Have you tried the CyanogenMod installer? Here are some points to consider when using the installer:
Back up your data!
Back up your data. Did I say this already? Backups made in recovery are not safe unless they are made to a true external sdcard. If you want to go back to stock, make preparations for doing so before running the installer.
Use a high-quality USB cable. A cable that works for charging won't necessarily work reliably for data transfer. The OEM cable that came with your phone should be a good choice, but if the connector has been stressed often enough almost any cable can become unreliable.
Don't move your phone while installing. After you click 'Install', unless you need to unlock your bootloader or interact with the phone for some reason, leave it on a level surface with as little strain on the USB cable as possible until the install is complete.
Charge your battery. Don't attempt the install with a partially drained battery.
Don't use a USB hub. Plug your cable directly into a port on the workstation.
Disable any anti-virus software for the duration of the install.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
FuTuRisTiC Zo3 said:
im currently on Android Revo HD 71.1 trying to upgrade to CM 11 Nightly and I get everything from this site or the official site I don't know how to check the checksum to see if its bad.
Click to expand...
Click to collapse
Here is information and instructions for checking MD5.
FuTuRisTiC Zo3 said:
Im am Currently on Android Revo HD 71.1 trying to update to CM 11 nightly and I get them from this site or the official sites but this is what it tells me when I try flashing 2.6.3.3
checking for MD5 file...
Skipping MD5 check: No MD5 file found.
Verifying zip signature...
E:zip signature verification failed: 1
then it says error flashing zip with the location of the file and what not
Click to expand...
Click to collapse
Here is a post on manually installing CM11: http://forum.xda-developers.com/showpost.php?p=56004369&postcount=4
I have rooted the device some time ago and now the lollipop update finally arrived.
I've used the original system all time long but when i try to update i get error, finally i've tried a sideload update and i can see the error. Now my problem is with this error:
Package expects build fingerprint of motorola/condor-retde/condor_umts:4.4.4/KXC21.5-40/46:user/release-keys or motorola/condor-retde/condor_umts:5.1/LPC23.13-34.8/10:user/release-keys this device has motorola/condor-retaildsds/condor_umtsds:4.4.4/KXC21.
Instalation aborted.
Now i believe i understand why i get this error, but my question is how to make it work. And what's the best method, by modifying the current software or by modifying the update.zip
PS. I'm an sysadmin not an android developer so please keep it simple.
Hi. My Moto E is giving me the same error as yours. Using Team Win Recovery Project, it says:
"Installing '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Package expects build fingerprint of motorola/condor_retla_ds/condor_umtsds:4.4.4/KXC21.5-40/47:user/release-keys or motorola/condor_retla_ds/condor_umtsds:5.1/LPC23.13-34.8/9:user/release-keys; this device has Motorola/omni_condor/condor:4.4.2/KOT49H/eng.bigbiff.20140616.171951:eng/test-keys.
E:Error executing updater binary in zip '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'
Error flashing zip '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'
Updating partition details..."
Thanks!
Hello everyone.
I'm having some trouble updating my cm 12.1 custom nightly on my LG G3 vs985.
I have tried flashing the 23c modem to my phone, but I had no luck.
Here is what it gave me
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Checking for BASEBAND version 24B
Checking for BASEBAND version 35B
ERROR: It appears you are running an unsupported baseband
assert failed: g3.verify_baseband("24B: 2 . 0 . 1 . C1. 13-00073". "35B: 2 . 0 . 1 . C1 . 4-00005") == 1
E:Error executing updater binary in zip '/sdcard/Download/cm-13 . 0-20160319-NIGHTLY-vs985.zip'
CM requires the24B or 35B baseband, just like it says in the error message. Flash one of those.
Sent from my LG-VS985 using Tapatalk
usmcamgrimm said:
CM requires the24B or 35B baseband, just like it says in the error message. Flash one of those.
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Thanks mate, managed to get everything (GAPPS, xposed, some modules, etc) installed after fighting with GAPPS for 6.0 causing bootloops for 45 minutes. ?