I have a Razor from rogers, i got it 2ed hand. i was not paying attention and installed the ICE update that rogers rolled out and it installed but locked up and was rebooting at random. I tried unlocking the boot loder to install a copy of the rogers Blur_Version.651.167.3331.XT910.Rogers.en.CA but when i rebooted it after trying the unlock it goes to:
AP fastboot flash mode (S) (boot failure)
0a.6c
to retunt to normal mode first press power key to powe down
device is locked. stats code 0
battery ok
OK to program
transfer mode:
USB connected
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG OTV (CG: system
Invalid CG OTV (CG: system)
what do i do i have no idea and all my searching has not yelled any ideas
btf16 said:
I have a Razor from rogers, i got it 2ed hand. i was not paying attention and installed the ICE update that rogers rolled out and it installed but locked up and was rebooting at random. I tried unlocking the boot loder to install a copy of the rogers Blur_Version.651.167.3331.XT910.Rogers.en.CA but when i rebooted it after trying the unlock it goes to:
AP fastboot flash mode (S) (boot failure)
0a.6c
to retunt to normal mode first press power key to powe down
device is locked. stats code 0
battery ok
OK to program
transfer mode:
USB connected
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG OTV (CG: system
Invalid CG OTV (CG: system)
what do i do i have no idea and all my searching has not yelled any ideas
Click to expand...
Click to collapse
How did you unlock the bootloader? You should try doing my recovery process, just be sure to have a copy of the Rogers OTA update on an external SD card...
You can't unlock boot loader on the RAZR... you could follow danifunker's instructions in the Rogers ICS OTA thread to flash gb base and upgrade to ICS I believe that should be enough to fix a faulty upgrade...
Sent from my XT910 using xda app-developers app
Hi guys! I need help!
I have tried to flash my RAZR XT910 (EMEA) but something goes wrong and it's bricked.
Now I can use AP Fastboot only and If I select "Normal Powerup" or "Recovery" or "BP Tools", I get the "Dual Core" Motorola logo for a while, and then the following screen:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
I flashed the ROM Blur_Version.673.94.324.XT910.MERetail.en.06 (6.7.3-94_SPI-324) - Retail Asian through RSD, the result was Sucess, but it's not help.
Please help me to resolve this problem!
SOS! help needed!!
http://sbf.droid-developers.org/umt...PDRICSRTCEE_HWp2b_Service1FF_fastboot.xml.zip
Flash this one.
Gesendet von meinem XT890 mit Tapatalk 2
I just tried. Same result :crying:
Does anyone have any solution?
Stayers said:
Does anyone have any solution?
Click to expand...
Click to collapse
Go to recovery, make the wipes and flash the stock rom again
Semseddin said:
Go to recovery, make the wipes and flash the stock rom again
Click to expand...
Click to collapse
I can't go to recovery. If I select "Recovery", I get the "Dual Core" Motorola logo for a while, and then the following screen again:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
The only screen I can get to is the AP Fastboot
you need to get the factory cable from ebay and flash sbf for your region
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
I flash with a factory cable, i made it with this video: http://www.youtube.com/watch?v=XwwI_6doBWk
somebody else can help?
I flashed stock ISC (SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml) with RSD 5.7. The result was "PASS" but i still have a same problem! =((((
What can i do else? Maybe i can erase all partitions and flash it again?
fastboot erase userdata
fastboot erase cache
fastboot reboot
it didn't help me =(
factory cable
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
What is the difference between factory cable and normal cable? Will I able to flash official stock with factory cable?
Hello,
I have a gsm razr and he is on jb kernel and i need to return on ics but when a want flash with rsd (rom official eu) my phone fail at the step 6/10.
My phone it's a XT910 from france
Tape name : M0C2E FCC ID : IHDP56ME2
When i go on bp tool i have :
Invalid flash mode (S)(boot failure)
OA.65
Device is LOCKED, Status Code :0
Battery ok
Ok to program
Transfer mode
USB connected
Invalid CG OTV (CG:system) Invalid SP Data
Invalid HAB (CG:System Status:0X0035
Invalid OTV (CG:System)
fastboot i have :
normally and rsd detecte my phone.
Please help me, good bye.
You can't downgrade from Jellybean to ICS.
Hi i was following this guide http://forum.xda-developers.com/showthread.php?t=2078021
and at step 5. Once done reboot your phone up using bptools, switch it off again and then again go into fastboot mode
phone won't nboot to bmm 3.2 ...
boot faliure
battery low
Invalid CG OTV (CG:Webtop): Invalid SP Data
Invalid CG Version (Cg:Webtop)
Invalid CG OTV (CG: Webtop)
can someone help me?
if i try restore 4.0.4 with rds i have this error failed flashing process at cdt.bin
sorry for my bad englishg
Hello!
My phone: XT910
Stock rom: ICS
Safestrap 3.11
2nd rom: AOKP (http://forum.xda-developers.com/showthread.php?t=2162827)
So then I decided to flash new kernel:
http://forum.xda-developers.com/showthread.php?t=2223517
JBX-Kernel-1.0-Hybrid_2013-08-30 was flashed, starting picture was changed to the JBX, but aokp rom stopped to load.
As written in tutorial I have flashed rom and gapps. And everything become fine.
I have tried several times to flash your kernel, but it was the same.
Then I downloaded Edison version of the kernel, and my phone become a brick
i have smth like this:
Code:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMCInfo: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status 0X0056)
Invalid CG OTV (CG: system)
The only menu that I can reach is "AP Fastboot". Please,help me if you have an idea how to unbrick it
P.S: Now my phone is detected as SPYDER_S by RSDLite (like a XT912, am I right?)