Hi,
I had problem with my LG L9, screen totally blank. when connecting to usb OMAP4430 is detected, i already installed the driver do what Lelus said using Fastboot but when I choose option 3 for P765 there is an error message "Failed: Remote partition doesn't exist".
And i am try to do this step http://forum.xda-developers.com/showthread.php?t=2546571 try to flash using LG software tools but after 30% phone is disconnected. phone always disconnected after +/- 2 minute.
Please help me to solve my problem.
Thanks,
Related
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Can you give me more details? "Dead boot"
Sent from my GT-S5660 using xda premium
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
anyone have pinout for jtag for this phone?
UP
looking for a jtag for LG P920
arsen4oo said:
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Click to expand...
Click to collapse
Just a question
how did you do brick your phone ?
accidentally erase boot/recovery partitions?
or x-loader / u-boot areas ?
arsen4oo said:
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
Click to expand...
Click to collapse
so you can't even enter S/W download mode ?
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
techtechnique said:
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
Click to expand...
Click to collapse
Since your phone ran out power in the middle of flashing a ROM then all of the partitions the ROM overwrites with new data are only partially flashed and still contain data from your previously installed ROM. In the process of only partially flashing the partitions due to your phone losing power the partitions have been corrupted (Including boot partition and recovery partitions), which is why your phone isn't able to boot, access recovery mode, download mode, or be recognized by any computer program. At this point unfortunately it seems you have hard bricked your phone and JTAG is really your only option to attempt to revive your phone. However, I have heard the Optimus 3D's JTAG input isn't connected so it isn't functional. You should try bringing it into a repair shop and see what they can do for your phone.
Sent from my SCH-I535 using xda premium
Hello everyone,
So I tried to flash cwm 6.0.4.4 on my lg p760, but I did't saw what that zip was for LG 4x, flashing went successfully , but after reboot my phone won't start it reacts to nothing, no lg logo, no vibration. I would really appreciate any help to repair my phone
Sorry but you'll have to follow the unbrick guide here -
http://forum.xda-developers.com/showthread.php?t=2085344
Thank you for reply, but all these solutions are in download mode or recovery, but I can't access any of that the phone is just dead screen not showing anything, when I connect my phone to pc without battery windows is showing "usb device is not recognized" error and keeps it beeping just like I connect and disconnect my phone every second (I have usb drivers installed)
You need to follow this http://forum.xda-developers.com/showthread.php?t=2585161, mine had the same error and fixed in 10 min!
hi,
i have lg f160. which was bricked after flashing some rom. Now the phone is stuck on lg security error bootloop. I connect it to pc in download mode but computer doesn't recognize my device at all. No driver installation, no popups, nothing appears in device manager either. On same pc. Lg optimus g is detected in download mode without a problem. I tried different pc and cable. But still nothing. I cleaned the usb ports of mobile but nothing changed.
Is this a hardware/motherboard issue?
Hi, I was looking everywhere since yesterday but can't find a solution. I had cwm + twpr + lollipop cm12. I've decided to back to stock, so as allways: driver, b2cApp, kdz, v20h and v10a, usb, s/w mode, xml parser, shhtp, etc... Standard offline kdz method. But during flashing I stuck on 15% and get the info that my phone anad pc are not connected by usb cable, I tried changing usb ports at pc, reinstaling everything, but I have still the same error. If that woldn't be much enough I ****ed something up and I think I don't have any recovery right now
I can put my phone in s/w mode but I stuck on 15% with usb not connected error.
I can put my phone in fastboot mode but my pc does not recognize it, its just pluging in and out it from windows.
I can put my phone in stuck on LG logo 'mode'
Any help? How to unbrick it? How to flash stock or at least some custom recovery? Of course unlocked bootloader. Please help me :crying:
Key it ****ed up even more.
When kdz show me to connect my cable i clicked retry, plugen cable out and in, kdz found my device, and go to step 2. In half way I had again the same error, so again clicked retry, plug out, plug in. Again founded my device, when I had downloaded 100%, same situation. founded my device, log that tool is extracting kdz and nothing. Waiting about ~1,5h, nothing happend, so I diconected cable. In that moment kdz go to third step and I get windows force close for not repodnig app kdz. I said a loud **** and started again. Phone has not been found anymore by kdz. After a few tries, booted to fastboot, and connected to computer. It has been found as Google Fasbtoo USB, no way to update driver to fastboot. I disconected phone and decided to try again with s/w but nope. S/W not turning on anymore (with or without battery). Fastboot not turning on any more. Just LG logo, when I'm connecting device to PC it is sometging pluging in and out but nothing showing in device manager
Any ideas? Please!
I have the SAME problem with my (now old) LG... I read more than 20 tutorials for getting back to stock and nothing
Sent from my GT-I9205 using XDA Free mobile app
I triend on clen frsh windows I get OMAP device, fastboot is finding my device but wont start fastboot mode in my phone, when trying to flash cwm I get security error and still no s/w mode So I'm affraid that we have to say goodbay to our L9
What's more:
1. Can't find orginal p760 recovery, tried to flash p769 and I get wird effect, after LG logo screen looks like broekrn, some color stripes and all display going to white, then turn off.
2. Using fastboot and choosing options wit u-boot making my phone turning to LG logo with no security error, still no s/w, fastboot or recovery mode.
3. Using option 1 (1. Fastboot) from the fastboot tool is making my phone turnig black screen and nothin more, no even LG logo.
Please can anyone help us?
I bricked my LG Optimus L90 and whenever I turn it on it gets stuck on the white T-Mobile screen. AFAIK this should just be a soft brick and it should be fixable. I'm able to boot into download mode and connect my phone to my PC via USB cable. When I do this, though, it fails to install the "MTP USB Device" driver and the device status says "This device cannot start. (Code 10)". What am I doing wrong? Should I be doing this a different way? Or could my phone actually be hard bricked?
danbro2 said:
I bricked my LG Optimus L90 and whenever I turn it on it gets stuck on the white T-Mobile screen. AFAIK this should just be a soft brick and it should be fixable. I'm able to boot into download mode and connect my phone to my PC via USB cable. When I do this, though, it fails to install the "MTP USB Device" driver and the device status says "This device cannot start. (Code 10)". What am I doing wrong? Should I be doing this a different way? Or could my phone actually be hard bricked?
Click to expand...
Click to collapse
Chill bro your phone isn't completely bricked but do put your question here so others can see it too
https://forum.xda-developers.com/showthread.php?t=3776189
Ask anything here! Don't be shy [ROOTING, BRICKED, ROM'S, DEVELOPMENT, OTHER]
Sent from my One Plus 5T using XDA-Developers Legacy app