I bricked my LG Optimus L90 and whenever I turn it on it gets stuck on the white T-Mobile screen. AFAIK this should just be a soft brick and it should be fixable. I'm able to boot into download mode and connect my phone to my PC via USB cable. When I do this, though, it fails to install the "MTP USB Device" driver and the device status says "This device cannot start. (Code 10)". What am I doing wrong? Should I be doing this a different way? Or could my phone actually be hard bricked?
danbro2 said:
I bricked my LG Optimus L90 and whenever I turn it on it gets stuck on the white T-Mobile screen. AFAIK this should just be a soft brick and it should be fixable. I'm able to boot into download mode and connect my phone to my PC via USB cable. When I do this, though, it fails to install the "MTP USB Device" driver and the device status says "This device cannot start. (Code 10)". What am I doing wrong? Should I be doing this a different way? Or could my phone actually be hard bricked?
Click to expand...
Click to collapse
Chill bro your phone isn't completely bricked but do put your question here so others can see it too
https://forum.xda-developers.com/showthread.php?t=3776189
Ask anything here! Don't be shy [ROOTING, BRICKED, ROM'S, DEVELOPMENT, OTHER]
Sent from my One Plus 5T using XDA-Developers Legacy app
Related
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Can you give me more details? "Dead boot"
Sent from my GT-S5660 using xda premium
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
anyone have pinout for jtag for this phone?
UP
looking for a jtag for LG P920
arsen4oo said:
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Click to expand...
Click to collapse
Just a question
how did you do brick your phone ?
accidentally erase boot/recovery partitions?
or x-loader / u-boot areas ?
arsen4oo said:
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
Click to expand...
Click to collapse
so you can't even enter S/W download mode ?
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
techtechnique said:
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
Click to expand...
Click to collapse
Since your phone ran out power in the middle of flashing a ROM then all of the partitions the ROM overwrites with new data are only partially flashed and still contain data from your previously installed ROM. In the process of only partially flashing the partitions due to your phone losing power the partitions have been corrupted (Including boot partition and recovery partitions), which is why your phone isn't able to boot, access recovery mode, download mode, or be recognized by any computer program. At this point unfortunately it seems you have hard bricked your phone and JTAG is really your only option to attempt to revive your phone. However, I have heard the Optimus 3D's JTAG input isn't connected so it isn't functional. You should try bringing it into a repair shop and see what they can do for your phone.
Sent from my SCH-I535 using xda premium
Hello everyone,
So I tried to flash cwm 6.0.4.4 on my lg p760, but I did't saw what that zip was for LG 4x, flashing went successfully , but after reboot my phone won't start it reacts to nothing, no lg logo, no vibration. I would really appreciate any help to repair my phone
Sorry but you'll have to follow the unbrick guide here -
http://forum.xda-developers.com/showthread.php?t=2085344
Thank you for reply, but all these solutions are in download mode or recovery, but I can't access any of that the phone is just dead screen not showing anything, when I connect my phone to pc without battery windows is showing "usb device is not recognized" error and keeps it beeping just like I connect and disconnect my phone every second (I have usb drivers installed)
You need to follow this http://forum.xda-developers.com/showthread.php?t=2585161, mine had the same error and fixed in 10 min!
Hi-
My old moto E first generation has recently bricked, and just stopped working - all that happens is when I plug it in and hold the power button, the notification led blinks a few times. When I try to enter fastboot, nothing happens at all.
When I plug the bricked device into my Windows 10 pc, It shows up in Devices and Printers as "Qualcomm HS-USB QDloader 9008 (COM4)". In device manager, however, it pops up, if at all, as "Unknown USB device (Device Descriptor Request failed)".
Please help!
Thanks in advance for your time.
Luke__burch said:
Hi-
My old moto E first generation has recently bricked, and just stopped working - all that happens is when I plug it in and hold the power button, the notification led blinks a few times. When I try to enter fastboot, nothing happens at all.
When I plug the bricked device into my Windows 10 pc, It shows up in Devices and Printers as "Qualcomm HS-USB QDloader 9008 (COM4)". In device manager, however, it pops up, if at all, as "Unknown USB device (Device Descriptor Request failed)".
Please help!
Thanks in advance for your time.
Click to expand...
Click to collapse
Hard bricked
Buy New mobile or replace your mother board
Sent from my AO5510 using Tapatalk
Rajendran Rasa said:
Hard bricked
Buy New mobile or replace your mother board
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Is there no other way?
https://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093/amp/
Try them, may help
Best of luck
I have a problem with the LG D373EU. It has a black screen,no sign of life what so ever. When i plug it in my PC it does not recognize it and when i go to Device Manager it sees it as QHSUSB_BULK. I don't have Linux and i don't want to install it. I hate it,so any solution for Windows or Mac? Is there a solution for this at all? *EDIT*
No need for replying,i sold the phone. Thanks to anyone who wanted to help!
-filipkosteski
After being stuck in qloader 9008 mode, I decided to flash the kdz to a micro sd card using eMMC software download as I saw other people do it with their phones and it working fine. However, when I put the sd card into the phone, the screen was still black but this time instead of qloader 9008, it detected as AndrodNet USB Serial Port. When that came up, I thought I could use LGUP but there's a problem with every LG tool I used.
LGUP Would Show unknown model and show a com port number and nothing after it. When I did select that port it would say "you have to select a known model please"
When I used LG FlashTool 1.8.1, every time I would load a firmware and press the yellow arrow, It would say "Failed PreviousLoad()". (I know this software works because I have tried it on different phones and it would work)
When I use LG Bridge, I'd select update error recovery and it would go on "checking device information" and would return back with "connect your mobile device to the USB port. If it is already connected, contact LG customer service.
When I use LG Flash Tool 2014, It would say "problem with communication between cell phone and PC"
Does anybody have any other ideas or tools for me to try? All help I can get is appreciated. Or was it better to be stuck in qloader9008 mode?