[Q] Xperia x10 mini touchscreen not working. - XPERIA X10 Q&A, Help & Troubleshooting

Hello readers,
I would like to inform you with my problem and would really appreciate if you can help me with it.
My Xperia x10 mini touchscreen is not working(everything else does).I've read on the internet that I have to change my firmware back to its original,I have tried pc companion rooting and everything but I cannot do anything cause I cannot put it in debugging mode on cause my touchscreen is not working.
Is there a way to install my original or custom firmware without enabling debugging mode ?
Please do help.
Thank you for your time.

Related

x10 mini 2.1 connection problems

Hi I was wandering if any of you good chaps might be able to help me at all please? I flashed my x10 mini to generic world without a problem, received the update no problem, but now when i connect my phone to the computer it shuts down and restarts constantly and says no sim??? i cannot use pc companion because of this i have uninstalled and reinstalled pcc and repaired phone but to no avail, any advice please.
many thanks in advance.
P.S it now turns out i can't even charge from the mains as it also freezes my phone, i have emailed S.E but with no answer.

[Q] Rebooting issue

Hey xda forums, my x10 Mini Pro uses Mini CM7 V21, 2.37 Android version (stock baseband) and ever since modding it every time I plug it into my laptops usb and enable usb storage on the phone the screen hangs and reboots making me unable to access my phones files on my laptop, I can access usb storage via Clockwork recovery although this is quite the pain having to reboot each time I want to put files on my phone, please help me resolve this.
Thanks in advance, any help is greatly appreciated.
Deanux said:
Hey xda forums, my x10 Mini Pro uses Mini CM7 V21, 2.37 Android version (stock baseband) and ever since modding it every time I plug it into my laptops usb and enable usb storage on the phone the screen hangs and reboots making me unable to access my phones files on my laptop, I can access usb storage via Clockwork recovery although this is quite the pain having to reboot each time I want to put files on my phone, please help me resolve this.
Thanks in advance, any help is greatly appreciated.
Click to expand...
Click to collapse
i think u didnt close usb debugging which is in application setting once chec for that even if u didnt get
once again format every data in your phone using boot options and re instal cm 7 then u can solve ur problem
But wouldn't closing usb debugging stop me being able to explore my phone via laptop?
I would format and reinstall but i've spent so long setting up and sorting out my phone that it'd take ages to sort out again
Thankyou

[Q] Get back to stock 2.1 FW from stock 2.3.3 w/ broken or damaged USB port?

Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Reply
TheViperCE said:
Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Click to expand...
Click to collapse
Hmm, Interesting problem. Are you sure you have checked Your device manager when you turned off your phone and pressed Back button and USB connected? Like this thing shows?
View attachment 1129524
If not, either these two ways:
1)Download These ADB driver here for X10i and look how they installed. See is it solved?"
2)Are you sure how to use flashmode?? Power off button, don't connect your USB to computer yet. Then press and hold Back button and connect the USB to your PC. The green light will retain and screen will be black all the time
3)If not, Try reinstall SONY PCC / Or try email SONY
AND!!!! BEFORE You do anything like installing custom rom or stock rom from XDA here, your X10 must BE ROOTED my friend??Or not, custom roms cannot be installed into your phones? and The link you pasted methods only worked after you rooted your X10+r installed recovery.
AND, back to your problem. Sorry but No. for 2.3.3official X10, rooting must be done via flashtool. And it's considered MI5 for installing ROMs without rooting!! Plus, ICS roms or CM9 only can be flashed after your phone's bootloaded is unlocked..and of course after rooting!!
Hope this helps.
whitefang
Thank you very much on your reply whitefang! Your help is very much appreciated. Will try to test those things and will keep you posted ASAP.

[Q] [xperia mini pro] charger and usb not recognized & phone dead

hello
i have xperia mini pro , yesterday i try to install the cyanogenmod 9.1 for the first time
downloading cyanogenmod 9.1 from this link
http://download.cyanogenmod.com/?device=mango
and exactly follow this tutorial
https://www.youtube.com/watch?v=O52IeX93Jek
http://forum.xda-developers.com/showthread.php?t=1527159
finally install the CM9.1 and everything look ok
today i try to charge my phone but the phone do not recognize the charger and usb
now battery loss the charge and my phone is DEAD :crying:
does anyone know how I can fix this ?????
sorry for my bad english
hi
first reset factory the phone.
if dosen\t work turn on usb debugging and flash the stock rom with flashtools.
if a software problem occurred it will be fix.

Can't update M4 to 26.3.A.1.33 - USB Problem or something?

Hi, unfortunately I've had to go back to my xperia m4 aqua because my new phone ended up being bricked or locked or whatever and I can't seem to get it back on in anyway. It just stays on the same screen after doing resets and other things.
Anyway I need help with XPERIA. When I do an update using Xperia companion it will turn my phone off and tell me to do the hold down volume and put the usb in. I do that then it just comes up with USB not recognized. I've tried uninstalling and finding usb drivers etc. But nothing seems to work. Any help here? I haven't used my Xperia for a year so not sure if I should root my phone and do a rom install or something. I have no idea since I'm a noob.
Think I posted in the wrong forum section? Anyway of moving it to Q&A?
(update) I have moved the USB to 2.0 ports. It says MTP USB Device not successfully installed (code10).
Also my XPERIA M4 AQUA is 5.0? I just read there is a 6.0? I can't seem to update ffs lol

Categories

Resources