hello
i have xperia mini pro , yesterday i try to install the cyanogenmod 9.1 for the first time
downloading cyanogenmod 9.1 from this link
http://download.cyanogenmod.com/?device=mango
and exactly follow this tutorial
https://www.youtube.com/watch?v=O52IeX93Jek
http://forum.xda-developers.com/showthread.php?t=1527159
finally install the CM9.1 and everything look ok
today i try to charge my phone but the phone do not recognize the charger and usb
now battery loss the charge and my phone is DEAD :crying:
does anyone know how I can fix this ?????
sorry for my bad english
hi
first reset factory the phone.
if dosen\t work turn on usb debugging and flash the stock rom with flashtools.
if a software problem occurred it will be fix.
Related
Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Reply
TheViperCE said:
Hi guys! Been a long follower of posts here in the X10 forums and the Acer A500 forums since I own both devices and it would be really great if you can help me in my problem with my X10:
( DEVICE: Sony Xperia X10 ; ANDROID VERSION: Stock/Official 2.3.3 )
Recently I have noticed a problem with my Xperia X10 since I updated it with Official 2.3.3 gingerbread update from sony, here are my observations:
* when connected to the PC, it only charges and does not sync or function as a mass storage in any way (I have tried turning off USB Debugging in the settings but nothing happened.
* I tried repairing it thru PCC or SEUE but still it cant be detected by the program (Even tried reinstalling PCC and SEUE for many times, also tried to sync it thru Flash Mode but it doesnt enter flash mode, the green LED just blinks but nothings even appearing on the screen even if I click on it for 10 minutes or so)
* I tried using Flashtool to install a stock or even a custom rom but like Ive said it wont enter flash mode
* One time I connected it, it tried to install the driver but it failed then suddenly the device disappeared (Even tried to look at Device Manager)
* Tried restarting the computer then connect the X10 but still its not detected
* Tried to hard reset it to see if there will be any changes but nothing happened
* Tried to install and reinstall the drivers included with Androxyde's flashtool and Azuzu's Flashtool but nothing happens, still it wont be detected
Now back to my problem, can I install an earlier stock rom or a custom rom in any other way other than using Flash mode just so that I can root it and install an ICS rom or FXP's Cyanogen 9 rom, or even install Beats by Dre & Bravia Engine tweaks for my X10? I've seen Doomlord's similar solution ( http://forum.xda-developers.com/showthread.php?t=1054818&nojs=1#goto_threadsearch ) sadly it's only for custom roms. Need your reply guys, thank you very much!
Click to expand...
Click to collapse
Hmm, Interesting problem. Are you sure you have checked Your device manager when you turned off your phone and pressed Back button and USB connected? Like this thing shows?
View attachment 1129524
If not, either these two ways:
1)Download These ADB driver here for X10i and look how they installed. See is it solved?"
2)Are you sure how to use flashmode?? Power off button, don't connect your USB to computer yet. Then press and hold Back button and connect the USB to your PC. The green light will retain and screen will be black all the time
3)If not, Try reinstall SONY PCC / Or try email SONY
AND!!!! BEFORE You do anything like installing custom rom or stock rom from XDA here, your X10 must BE ROOTED my friend??Or not, custom roms cannot be installed into your phones? and The link you pasted methods only worked after you rooted your X10+r installed recovery.
AND, back to your problem. Sorry but No. for 2.3.3official X10, rooting must be done via flashtool. And it's considered MI5 for installing ROMs without rooting!! Plus, ICS roms or CM9 only can be flashed after your phone's bootloaded is unlocked..and of course after rooting!!
Hope this helps.
whitefang
Thank you very much on your reply whitefang! Your help is very much appreciated. Will try to test those things and will keep you posted ASAP.
Some weeks ago, my Xperia U stopped detecting my USB cable as a USB cable.
It all happened one day, when the battery became weak (<15%) and I plugged the USB cable. The XU started to blink the charging light non stop, with the warning popup having the same behaviour in the OS (appearing, disappearing, appearing, disappearing...). So I unplugged it, thinking that it should be a problem with my computer USB port and plugged it to electricity. Only some days later, when I plugged it again to the computer, I came to realize that the problem was in the XU because it wasn't detecting that a USB cable was connected but it was charging normally like it should and it still does until this day (it still changes plugged to electricity too, no problem there).
Things I've tried so far:
- Enable/disable debug mode does nothing;
- Tested with friends' USB cables without any success;
- When I tried to boot into flashmode, Windows tried to install some driver and stopped with no warning;
- On a Linux machine, I checked the connected by USB devices and there was an error concerning the device but I couldn't figure it out what was it.
So, it seems like the USB cable detection is dead and I want to send it to warranty to have them checking the problem, but I have my XU rooted and it's with a stock ROM but not the one it should be (it's with that French one when ICS firstly came out).
That said, my question here is if there's anyway I can unroot and install my provider stock ROM (the ROM file is not a problem) without using the USB cable, so I don't have any problem with the warranty. I've used WiFi ADB app with success since I can connect to my device and perform adb commands, but I don't know what I can do with it to help me solve my problem...
Thanks in advance for your answers.
you can via Wi-FI channel's built to give ROM memory? If so, tell and through Wi-Fi ADB flash tis ROM, unless of course will
Yes, I can send the stock ROM file with ADB WiFi to my XU, but I don't know if flashing with 'just' ADB works, because I've always used Flashtool for flashing... Could you explain with more details, please?
I've been occupied and in need of my XU, and so I still haven't send it to the warranty, but I wanted to do it this week... So, is there anyone that can help me?
I'd be really greatful if you could tell me how you got flash tool to detect the XU. After installing a custom rom my device won't stay in flashmode. I have ALL the drivers.
TomHempt said:
I'd be really greatful if you could tell me how you got flash tool to detect the XU. After installing a custom rom my device won't stay in flashmode. I have ALL the drivers.
Click to expand...
Click to collapse
Man, that doesn't even make sense on this thread. Please, start a new thread or reply on one that fits your problem.
Hello , i`m new here and from a long time ago i have a problem with my sony ericsson Xperia x10i ... in the past i bought this phone and few days ago i wanted to update adroid version (actually 2.1) but i`ve been surprised because when i want to connect usb cable from phone to laptop , the phone is only charging , i don`t know what to do , i`ve tried many times but still the same problem ... can you help me ? thank you
Dexteruts said:
Hello , i`m new here and from a long time ago i have a problem with my sony ericsson Xperia x10i ... in the past i bought this phone and few days ago i wanted to update adroid version (actually 2.1) but i`ve been surprised because when i want to connect usb cable from phone to laptop , the phone is only charging , i don`t know what to do , i`ve tried many times but still the same problem ... can you help me ? thank you
Click to expand...
Click to collapse
I do not know if you tried .- but to enable usb acces you need to enable it on the phone after you connect it to PC. Scroll down the Status bar and tap Turn on USB storage
Hope it helps you
Hi everyone
I got a big problem and I never used Android phones before I always find more interesting Mini Pockets Htc always Windows hones
So I got a xperia x10 mini pro u20i I had problems charging (I always charge the battery with universal charger because here I cant fix it :S) but not connecting with my pc the cable always worked perfectly till today I connected my cable and I had a problem with my usb drivers SM Bus Controller it says not recognizes the usb it has some problems :/
and it turns on the green light for sometimes but it turns of again and again and it pops that sign :S ...
About Phone :
Model Number U20i
Firmware version 2.1-update1
Baseband version M76XX-TSNCJOLYM-53404015
Kernel version 2.6.29 SE<[email protected]#1
Build Number 2.1.A.0.6
PS: I root my phone with superOneClick
I never had time to get a room and to Install it to my xperia because I was afraid that i will do something wrong and will crush it
Sorry for my Bad English
and
Sorry for the New Thread if it was opened :S
I just wan't some help
I did factory Reset and the SD card I did Format i thought my antivirus dont let me to connect because of Viruses :/ ...
And more thing
I Rooted with superoneclick and never unrooted the phone :/
Its some problem with the root or what :/
And the cable Connects perfectly With Black Berry and LG Google touch screen :/
PS : My Phones try's to connect but than it end reconect again and not than it shows SM Bus Controller it says not recognizes
PLEASE HELP :crying::crying::crying:
Try installing Sony Ericsson Suit
It may resolve ur issue of drivers
Hello readers,
I would like to inform you with my problem and would really appreciate if you can help me with it.
My Xperia x10 mini touchscreen is not working(everything else does).I've read on the internet that I have to change my firmware back to its original,I have tried pc companion rooting and everything but I cannot do anything cause I cannot put it in debugging mode on cause my touchscreen is not working.
Is there a way to install my original or custom firmware without enabling debugging mode ?
Please do help.
Thank you for your time.