Related
Has anyone tried these two together, if so, what are the results? Can you use all the functions of the watch?
soulframe said:
Has anyone tried these two together, if so, what are the results? Can you use all the functions of the watch?
Click to expand...
Click to collapse
I doubt it... Using SE bt stereoheadset with display and it doesn't work like it would on paired to a SE phone, for example doesn't show name of the song that is playing.
i would liketo buy it
but it does not say its compatible with Tytn/Hermes
actually what the story inside?
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
I've a Wired Remote Controller dopod S1 bought to ebay.
Unfortunatelly my Tytn don't recognize this rc-w100... exist a full working driver for TYTN alias Hermes????
I've downloaded the official driver and i extracted and installed "manually" all the singular cab files!!!!
The results is listed above:
all the Remote_controller_Y-cable_Ax files, the Y-cable_B1_070323 and the Y-cable_E1_070323 and don't works and they produces a blank screen after the reset (so i have made an hard reset everytimes!)
Remote_controller_P1_070316.cab and the Y-cable_HERM1_070316.cab don't make any changes and the rc-w100 isn't recognized at all!
Remote_controller_AT1_070316.cab mute all the sound alsoo if i disconnect the RC-W100
Only with Remote_controller_Y-cable_T1_070316.cab the RC-W100 is recognized as a simple headphone
SO DON'T EXIST A FULL WORKING FUC***NG DRIVER!!!????
i'm desperate...
note:sorry for my baaaad english
Pfeffa-rah said:
It´ll work fine.
You just need to know that the buttons ONLY work for WMP (and HTC player....).
So If you use TCPMP or another player, the remote is useless. You will still get audio though. But if it´s just the audio you want, there are much cheaper solutions that work.
greetz,
Pfeffa-rah
Click to expand...
Click to collapse
Pfeffa-rah, what other cheaper solution that u are talking about? I am interested.
Thanks in advance.
7wolf said:
Unfortunately my Vodafone V1605 don't recognize it! I've downloaded and isntaled the RC W100 driver from the official HTC Site, but it don't work with WMP... the answer button don't make any effect...
I use the Schap's Rom 4.31... perhaps i must change the rom?
Click to expand...
Click to collapse
Hi, Could you send me that W100 remote driver as I cannot find it. I have x2 tytn ii and it works on one and not the other... Thanks, J
w100
yeah i could do with that driver too.
E100 Driver cabinets, anyone?
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
wazmo said:
Just got this POS today-when I plugged it in to a stock WM6 TyTN ROM, it didn't do squat-no work at all-no sound to the phones even!
I rooted around and found the remote_controller_Y_cable_T1_070316.cab and dropped it in-now I get headphone sounds at least, but everytime I try to launch the installer It says I have the latest drivers-and I can't seem to catch the thing at the point where I can snap up the cabinets.
Can someone post the other cabinets?
Click to expand...
Click to collapse
Never mind-I got 'em all by doing an install on my XP laptop with my device disconnected.
Who sez XP is junk?
Driver
Can someone put up the driver for the rc-w100? Couldnt find one on the official site. Tried googling but its nowhere to be found. Bought it on ebay, checked the "compatibility list" and my VOX is there. This kinda sucks.
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
hykq said:
Try htc music plug-in 1.0, I install it then my rc E-100 worked!But you can't use it with a Y cable.
Click to expand...
Click to collapse
Too late-I returned it.
But thanks for the heads-up-maybe someone else will use your info.
HTClugin?
Hi, any chance u can upload ur version of the plugin? thx
Where can the htc music plug-in 1.0 be found ?
Yeah, same question. I've just bought W100 and it's not woring on Schap's 4.31 ROM. Ideas.
download for the driver,now missing in htc support this fix
plese upload this file!!!!!!!!!!!!!!
I cant use RC E100 on my herm100. There is no any sound on ;-(
Any solution?
W100/E100: HTC's Achilles Heels
Don't buy those remote controllers.
Simples!!!!!!
THis file will enable you to listen to music, buttons doesnt work though... Is there anyone who has an idea how to make the buttons work?
Hi there,
I've got really strange problem with my XPERIA MINI PRO - when I plug in the headphones, the phone wouldn't recognize them.
Only if I've had them plugged before BOOT of my phone.
So, when Iam turning on / rebooting my phone with plugged phones, they're working and recognized, but when I disconnect them, same problem -> phone ignores it.
So, my xperia mini pro can't recognize the action of plugging in phones in general. Have tried official kernel, custom kernel, few roms and its deffinitely a hardware problem.
Does anyone knows how does this phone recognize that? And what might be my problem?
Thanx for any ideas.
A.
4n60 said:
Hi there,
I've got really strange problem with my XPERIA MINI PRO - when I plug in the headphones, the phone wouldn't recognize them.
Only if I've had them plugged before BOOT of my phone.
So, when Iam turning on / rebooting my phone with plugged phones, they're working and recognized, but when I disconnect them, same problem -> phone ignores it.
So, my xperia mini pro can't recognize the action of plugging in phones in general. Have tried official kernel, custom kernel, few roms and its deffinitely a hardware problem.
Does anyone knows how does this phone recognize that? And what might be my problem?
Thanx for any ideas.
A.
Click to expand...
Click to collapse
i have a similar problem on mine, but mine thinks it has headphones plugged it all the time! i downloaded an app called "headset toggle" it gives you a widget on your home screen to show if headphones are connected or not, and clicking on the icon forces a connect or disconnect of them regardless of wether they are connected or not, should fix your problem:
http://code.google.com/p/toggleheadset/
edit: just to add i have 4.0.4 and it works perfect on my phone
Headset not recognising
i am facing the similar problem...... my headset is also not detecting when i plug in, detecting only when i reset my phone and when i unplug again it's not detecting. i face this problem since i update my mobile to latest version (ICS 4.0.4)
4n60 said:
Hi there,
I've got really strange problem with my XPERIA MINI PRO - when I plug in the headphones, the phone wouldn't recognize them.
Only if I've had them plugged before BOOT of my phone.
So, when Iam turning on / rebooting my phone with plugged phones, they're working and recognized, but when I disconnect them, same problem -> phone ignores it.
So, my xperia mini pro can't recognize the action of plugging in phones in general. Have tried official kernel, custom kernel, few roms and its deffinitely a hardware problem.
Does anyone knows how does this phone recognize that? And what might be my problem?
Thanx for any ideas.
A.
Click to expand...
Click to collapse
Hello,
I had the exact same problem. It was a hardware problem. The only way is to take it in for service as I did. was repaired at electronics level.
Is it possible to solve this problem with headphones? Any app? Toggleheadset does not work for me. Thanks
Ludislav said:
Is it possible to solve this problem with headphones? Any app? Toggleheadset does not work for me. Thanks
Click to expand...
Click to collapse
did you use a SE headphone or a normal headphone?
i got similar problem. If jack isnt plugged in, there are some electronical noises in microphone, so i cant use, if i remove jack, the phone doesnt recognize. i ToggleHeadset, now microphone works good, and recognized that i removed the jack
what hardware causes this problem? i ask it because i bring my mini pro friday to the service, and maybe i'll ask about it there for repair.
Ludislav said:
Is it possible to solve this problem with headphones? Any app? Toggleheadset does not work for me. Thanks
Click to expand...
Click to collapse
This is a halfway software solution to make the phone work, for a complete repair i believe taking the phone to service is necessary.
I have a hardware problem where xperia mini pro (Stock Rom ICS 4.0.4) is constantly detecting headphones connecting and disconnecting. This stops all the multimedia with sound, so it was impossible to start a music file or video because it was automaticly paused).
Disabling the Live ware app (connect now app) did not help,
This may not work for people who can not make phone play music or videos after headphones are inserted,
I managed to solve problem with software and by inserting headphones in the jack once every boot.
You need 2 apps; soundabout and toggleheadset2 (widget),
soundabout does not need to be registered), you will just need to set soundabout service to run on every boot, and set the 'media audio' output to speaker by default.
Every time phone is booted or rebooted insert the headphones, then play a song, remove the headphones and toggle headset to off, every time you wish to use the headphones you will need to toggle the headset widget to on manually,
i recommend to have phone calls and messages also set to vibrate in case you forget to toggle after unplugging the headphones.
I have not yet managed to get working the headset microphone,
If the headphones work in iPhone they wont work in Xperia mini pro or arcs or 2011 device , u need JVC gummy plus , they come with adaptor to sort the problem
Sent from my SK17i using xda app-developers app
There is 2 headphone and Mic standards omtp and cita and only one headphone standard, older Xperia used a differnt standard to what they use today , everyone jumped on the iPhone standard
Sent from my SK17i using xda app-developers app
Hi,
I just bought an Xperia P, and previously I used a motorola milestone phone. While the watch is working properly under GB CM7.2 with openwatch, I can't get it work with Xperia P / ICS
I paired the device, but its still not working...
Any advise please?
eami said:
Hi,
I just bought an Xperia P, and previously I used a motorola milestone phone. While the watch is working properly under GB CM7.2 with openwatch, I can't get it work with Xperia P / ICS
I paired the device, but its still not working...
Any advise please?
Click to expand...
Click to collapse
Hi, I know I own another type of cellphone, but when I used the mod-installed Walkman software - I enabled both Sony player options in Openwatch AND checked the option that simulates headset button presses.
Also, I had to start the music player manually; pressing the stop/play button on the watch doesn't do it for you after GB.
Once the music player's running tho, the rest of the functionality should work.
Ultimate Chicken said:
Hi, I know I own another type of cellphone, but when I used the mod-installed Walkman software - I enabled both Sony player options in Openwatch AND checked the option that simulates headset button presses.
Also, I had to start the music player manually; pressing the stop/play button on the watch doesn't do it for you after GB.
Once the music player's running tho, the rest of the functionality should work.
Click to expand...
Click to collapse
It turned out I'm not alone. I found a few other people at sony forum who has the same problem. It seems that only ICS is affected. So the watch / openwatch works perfectly under GB, but not on ICS with Xperia P.
I don't have any idea what could be wrong :/
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
asura000 said:
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
Click to expand...
Click to collapse
Im not familiar with the headset but some times devices can only be synced with 1 device at a time, does it need to maybe be unlinked then linked with a new device?
SwiftSmoke said:
Im not familiar with the headset but some times devices can only be synced with 1 device at a time, does it need to maybe be unlinked then linked with a new device?
Click to expand...
Click to collapse
I am quite sure the sony ericsson mw600 allows you to pair multiple devices, and besides i broke my other phone so wouldn't be able to unpair it.
the must go into pairing mode first, then use the z2 to scan via bluetooth and connect it.
bluetooth handfree device doesn't require to unpair just pair with another device to overwrite it.
Sent from my GT-I9100 using XDA Premium 4 mobile app
just to clarify -
is the headset in paring mode?
Thank you for someone to notice it and I have the same issue with my DR-BTN200. It shows connected and music plays from external speakers and if it successfully connected then every single notification you get the phone keeps disconnecting it from the headset and plays music from external speakers and then connect it back to bluetooth headset.
HUGE BUG
asura000 said:
Hi all,
I recently got the xperia z2 and have been having trouble getting the z2 to identify my sony ericsson mw600 via bluetooth. I know i can pair the phone with my laptop and other devices so i dont think its a internal problem. I also know my mw600 headset works with my old phone. Any idea why the z2 might not be seeing my mw600 on the bluetooth screen?
Click to expand...
Click to collapse
Don't know if this helps but i have the smart wireless headset pro - mw1 and that works fantastically well. Had some trouble before with my Xperia V but they are all gone now with the Xperia Z2. Just put the headset in paringmode, made the phone visible, erased my old Xperia V from the MW1 and all was good.
Hi all,
Thanks for the input! I managed to solve it. My samsung s3 never needed the mw600 to actually go into pairing so i had no clue the mw600 even had a pairing mode! After some checking I found out i had to hold the power button for 5 seconds for it to go into pairing. After that my z2 picked it up fine and works just like before.
Thanks again to everyone that replied!
asura000 said:
Hi all,
Thanks for the input! I managed to solve it. My samsung s3 never needed the mw600 to actually go into pairing so i had no clue the mw600 even had a pairing mode! After some checking I found out i had to hold the power button for 5 seconds for it to go into pairing. After that my z2 picked it up fine and works just like before.
Thanks again to everyone that replied!
Click to expand...
Click to collapse
All bt devices need to go in pairing mode before they can be discovered. For your S3, I am guessing it is the first phone you paired with the headset brand new? Cause most devices will go straight into the pairing mode when turned on for the first time, hence that's why you didn't know or need to activate it.
had pairing issues too, was not able to pair some devices, but after disabling NFC i had no problems.