my phone does not turn black screen, the music you hear when you turn, can not enter download mode
odin detects it but I try to install I get error
Galaxy s2 GT-I9100
cris1232 said:
my phone does not turn black screen, the music you hear when you turn, can not enter download mode
odin detects it but I try to install I get error
Galaxy s2 GT-I9100
Click to expand...
Click to collapse
could you explain it in better way .. what happened ??
is it dead or you cannot flash ROM through ODIN ?
akhil17kr said:
could you explain it in better way .. what happened ??
is it dead or you cannot flash ROM through ODIN ?
Click to expand...
Click to collapse
I try to install cmw came the exclamation error install a PDA that was not and I was left so the mobile
Sorry my english I am spanish
cris1232 said:
I try to install cmw came the exclamation error install a PDA that was not and I was left so the mobile
Sorry my english I am spanish
Click to expand...
Click to collapse
Okay.. Try to Flash Stock ROM again if ODIN failed.. and make sure kies process isn't running in background..
Also tell details about your Phone.
Model
ROM
Kernel
and which ROM you want to flash..
akhil17kr said:
Okay.. Try to Flash Stock ROM again if ODIN failed.. and make sure kies process isn't running in background..
Also tell details about your Phone.
Model
ROM
Kernel
and which ROM you want to flash..
Click to expand...
Click to collapse
GT-I9100
Android jelly bean 4.1.2 stock and the kernel I do not know
Try OXA europe version
Related
hi
i just try to download one firmware with ODIN3 but it says FAILED, after rebouting the phone show in her Screen a PHONE+PC and yellow mark.
any help please
javasaad said:
hi
i just try to download one firmware with ODIN3 but it says FAILED, after rebouting the phone show in her Screen a PHONE+PC and yellow mark.
any help please
Click to expand...
Click to collapse
Sorry but I can not understand what you did.You try to download firmware with odin???!!!! You flashed with odin a firmware that you downloaded?Please make it clear in order to help u
Sent from my GT-I9100 using Tapatalk
are you saying your phone is in download mode? if it is then you can grab a stock rom or look for a rom that can be flashed via odin and follow instructions
I want to install firmware with Odin but the installation is FAILED !!
and when i try to reboot my phone the Screen Show one Picture :
PHONE+PC ( see picture attached )
im out sorry not seen that picture on my phone before but you get a free bump so other people can see. sorry cant help
javasaad said:
I want to install firmware with Odin but the installation is FAILED !!
and when i try to reboot my phone the Screen Show one Picture :
PHONE+PC ( see picture attached )
Click to expand...
Click to collapse
can you go in download mode with volume down+home+power button?
Sent from my GT-I9100 using Tapatalk
Hi friend
When I use Volume UP + Volume Down and put the USB in PC the software Odin can know my phone SGS2.
remow battery wait 5sec go dawnload mod. dawnload secure rom from samyfirmware flash whit odin and you wil finish
Sent from my GT-I9100 using xda premium
dawnload odin 1.83
Sent from my GT-I9100 using xda premium
what you mean by secur Rom ?
i see the website i didn't find any secure rom
can you explain me please
and i didn't understand and find the files :
the CSC, the PDA, and the Modem file
when i flashed the Official I use One file I mut it in PDA that's all
I shoud be use all files ? when I unzipped the Rom I didn't find these files
please help
Did you try reflashing? It has failed for me before so I close Odin, restart and try again. It always works as long as you can get to download mode.
Sent from my GT-I9100 using XDA Premium App
thanks for reply
I try to flash more time always the same message on Odin FAILED,
when I start to flash Odin know my SGS2 but when I clik Start in up in Odin
the place when Show FAILED is always Empty no prgression Bar no Message, the only message I see is when is Finish after 30second the message FAILED in RED color.
I was the Firmware DZKI1 and I want use for exemple JPK2 or other is no probleme ?
I think i use a Wrong firmware I have SGS2 I9100G and I use the firmware for I9100.
what can i do now ?
Have you killes all keis processes before starting odin?
Ricey
javasaad said:
I think i use a Wrong firmware I have SGS2 I9100G and I use the firmware for I9100.
what can i do now ?
Click to expand...
Click to collapse
download the correct firmware for your phone?put it in odin,put your phone in download mode,use task manager in your pc to kill all Kies services running,connect your phone to your pc,make sure that odin can see your phone(you can see in odin the com that your phone connected) and then just flash it.BUT make sure to download the correct firmware
Sent from my GT-I9100 using Tapatalk
Hi to all
Great I have find the Correct Firmware specialy for i9100G now is work fine, but
my alone probleme now is I didn't find the frensh language, how can I install the frensh language ?
javasaad said:
Hi to all
Great I have find the Correct Firmware specialy for i9100G now is work fine, but
my alone probleme now is I didn't find the frensh language, how can I install the frensh language ?
Click to expand...
Click to collapse
You can not just install french language over your rom.You need french for keyboard or for the UI?
Sent from my GT-I9100 using Tapatalk
there is in the App Market Pack frensh for Keyboard, but I didn't find find PAck frensh for the phone.
javasaad said:
there is in the App Market Pack frensh for Keyboard, but I didn't find find PAck frensh for the phone.
Click to expand...
Click to collapse
You can not flash french for UI over the rom.you must find a firmware that includes french.By the way did you search in settings>language and keyboard>Language settings "Select language" and there is no French there?
Exactly in Language and Seting I find English US and English UK and China and i think Maysia ,
i gave galaxy s ii and its rooted and i have a custom rom more specificly :
android version 4.0.4
baseband version I9100XXLQ5
kernel version 3.0.15-I9100XXLQ5-CL753921
build number Checkrom RevoHD V7
So i want back my stock rom because i want to connect my phone with KIES
also my phone is rooted and i use CWM and superuser
thanks a lot...
dimdistraction said:
i gave galaxy s ii and its rooted and i have a custom rom more specificly :
android version 4.0.4
baseband version I9100XXLQ5
kernel version 3.0.15-I9100XXLQ5-CL753921
build number Checkrom RevoHD V7
So i want back my stock rom because i want to connect my phone with KIES
also my phone is rooted and i use CWM and superuser
thanks a lot...
Click to expand...
Click to collapse
dwnld the stock firmware from Sammobile.com and flash the same from ODIN on ur PC, then u will be able to connect to KIES
apply
Sun90 said:
dwnld the stock firmware from Sammobile.com and flash the same from ODIN on ur PC, then u will be able to connect to KIES
Click to expand...
Click to collapse
how o flash the same from odin on my pc?
sorry if i did i sillly qeustion
dimdistraction said:
how o flash the same from odin on my pc?
sorry if i did i sillly qeustion
Click to expand...
Click to collapse
Go here
http://forum.xda-developers.com/showthread.php?t=1544487
dimdistraction said:
how o flash the same from odin on my pc?
sorry if i did i sillly qeustion
Click to expand...
Click to collapse
just google and u find lot of YOUTUBE video tutorial of flashing (ROM/KERNEL) thro ODIN(Step by step guide) for sure
apply
Barbiox Dogg said:
Go here
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
to do the thign which i want i should only use Instructions For Flashing Firmware:... right???
dimdistraction said:
to do the thign which i want i should only use Instructions For Flashing Firmware:... right???
Click to expand...
Click to collapse
Yes :good:
apply
Barbiox Dogg said:
Yes :good:
Click to expand...
Click to collapse
i did it but know my phone shows a message which say unfortunately logs provider has stopped or a message which say unfortunately the process android,process.acore has stopped stoped and after it crashed...
what i can do?
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Rash732 said:
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Click to expand...
Click to collapse
first flashed a karnel then try
Sent from my Micromax A68 using xda premium
country
premsrj said:
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Click to expand...
Click to collapse
THANKS
yh i installed cm10 again n its booting up well n working again
i wana make sure can i download any stock rom of this device countries doesn,t matter for example i am in united kindom can i choose india or etc it will works ?
And one more question , can i flash my device through odin to direct with gingerbread 2.3.6 or should flash with lower rom like 2,21 etc ...
hi
Sent from my GT-I9000 using xda app-developers app
thank you man
Hello, I have been upgrade my Samsung galaxy S II (i9100) to OS 4.1.2 (official samsung) and then error when factory.img ("xmit data fail").
i try to flash again with same OS. the show message "Complete(Write) operation failed."
anyone know solution please?
thank you
flash the firmware with odin
drimtheater said:
Hello, I have been upgrade my Samsung galaxy S II (i9100) to OS 4.1.2 (official samsung) and then error when factory.img ("xmit data fail").
i try to flash again with same OS. the show message "Complete(Write) operation failed."
anyone know solution please?
thank you
Click to expand...
Click to collapse
download the firmware from this link and flash it via odin:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want to flash it with odin turn off your phone then press and hold volume down+home+power then you will see a warning message and press volum up to enter download mode and flash the firmware.
P.S:Always check the new firmware with MD5 Sum check.
Sorry for bad english
LYandroid said:
download the firmware from this link and flash it via odin:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want to flash it with odin turn off your phone then press and hold volume down+home+power then you will see a warning message and press volum up to enter download mode and flash the firmware.
P.S:Always check the new firmware with MD5 Sum check.
Sorry for bad english
Click to expand...
Click to collapse
thanks buddy :good:
drimtheater said:
thanks buddy :good:
Click to expand...
Click to collapse
you are welcome.
LYandroid said:
you are welcome.
Click to expand...
Click to collapse
i have trouble again. screen lock & radio isn't working.
do i have to change the firmware again?
drimtheater said:
i have trouble again. screen lock & radio isn't working.
do i have to change the firmware again?
Click to expand...
Click to collapse
witch firmware you have flashed?
LYandroid said:
witch firmware you have flashed?
Click to expand...
Click to collapse
yes. should i flash again? i use OS jelly bean 4.1.2 (official australia)
drimtheater said:
yes. should i flash again? i use OS jelly bean 4.1.2 (official australia)
Click to expand...
Click to collapse
you may need to change the firmware...if it doesnt solve the problem,flash a stock based custom rom like neatrom lite.
Did you flash the Australian xsa firmware? I've never had troubles with that, and have flashed it on multiple phones & different carriers. Maybe give that a shot.
Sent from a galaxy far, far away
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
teejhay said:
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
Click to expand...
Click to collapse
Dont worry the fact you can get into download mode you should be good. Link below to download stock rom and instructions on how to flash-
http://forum.xda-developers.com/showthread.php?t=1544487
For rooting after go to link below. If you download the zip version it puts CWM and also roots your phone which you can flash from stock recovery so wont need odin. Just make sure you download the version for your filmware ie if your build is xwlsw download the lsw version. Any problems im happy to help.
http://forum.xda-developers.com/showthread.php?t=1877270
teejhay said:
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
Click to expand...
Click to collapse
flash a secure kernel(safe from emmc brickbug)like siyah,speedmod...etc.
Link to siyah kernel(ICS ver):
http://www.gokhanmoral.com/?p=1536
Link to speedmod kernel:
http://forum.xda-developers.com/showthread.php?t=1574218
P.S they are prerooted.
if the yellow exclamation is a yellow trainge then use traingle away from Chainfire(please thank him if it solves the yellow exclamation problem):
http://forum.xda-developers.com/showthread.php?t=1494114
i hope it helps.
stonedpsycho said:
Dont worry the fact you can get into download mode you should be good. Link below to download stock rom and instructions on how to flash-
http://forum.xda-developers.com/showthread.php?t=1544487
For rooting after go to link below. If you download the zip version it puts CWM and also roots your phone which you can flash from stock recovery so wont need odin. Just make sure you download the version for your filmware ie if your build is xwlsw download the lsw version. Any problems im happy to help.
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
teejhay said:
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
Click to expand...
Click to collapse
With stocks (original) firmware i would recommend Phillz kernel:
http://forum.xda-developers.com/showthread.php?t=1877270
There you can select the kernel for your version of firmware, and it works really nice for me and my stock rom.
As they told you before, the yellow triangle will be there, i would recommend you not to try to take it because you could heavily break your phone, but if you want to do it anyway here you have the link for triangleaway from Chainfire:
http://forum.xda-developers.com/showthread.php?t=1877270
Hope everything goes well, anything else you need just tell us!
teejhay said:
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
Click to expand...
Click to collapse
guys how do i know if my device GT-I9100 is already rooted because after i install PhilZ-cwm6-XWLSN-OXX-4.92.8-signed.zip using apply update from external storage. after rebooting only one icon appear on my screen its name "Superuser" nothing else did my device already rooted? if rooted so how can i customized my phone? sorry cz im just new for this kind of thing.. thank you please can you give me some tutorials how customise my phone.. thank you in advance...:good:
teejhay said:
guys how do i know if my device GT-I9100 is already rooted because after i install PhilZ-cwm6-XWLSN-OXX-4.92.8-signed.zip using apply update from external storage. after rebooting only one icon appear on my screen its name "Superuser" nothing else did my device already rooted? if rooted so how can i customized my phone? sorry cz im just new for this kind of thing.. thank you please can you give me some tutorials how customise my phone.. thank you in advance...:good:
Click to expand...
Click to collapse
As same on the other Thread that you opened. Download a ROOT app like Titanium Backup and if Superuser asks you for ROOT permission ur good...