Hello, I have been upgrade my Samsung galaxy S II (i9100) to OS 4.1.2 (official samsung) and then error when factory.img ("xmit data fail").
i try to flash again with same OS. the show message "Complete(Write) operation failed."
anyone know solution please?
thank you
flash the firmware with odin
drimtheater said:
Hello, I have been upgrade my Samsung galaxy S II (i9100) to OS 4.1.2 (official samsung) and then error when factory.img ("xmit data fail").
i try to flash again with same OS. the show message "Complete(Write) operation failed."
anyone know solution please?
thank you
Click to expand...
Click to collapse
download the firmware from this link and flash it via odin:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want to flash it with odin turn off your phone then press and hold volume down+home+power then you will see a warning message and press volum up to enter download mode and flash the firmware.
P.S:Always check the new firmware with MD5 Sum check.
Sorry for bad english
LYandroid said:
download the firmware from this link and flash it via odin:
http://forum.xda-developers.com/showthread.php?t=1544487"
if you want to flash it with odin turn off your phone then press and hold volume down+home+power then you will see a warning message and press volum up to enter download mode and flash the firmware.
P.S:Always check the new firmware with MD5 Sum check.
Sorry for bad english
Click to expand...
Click to collapse
thanks buddy :good:
drimtheater said:
thanks buddy :good:
Click to expand...
Click to collapse
you are welcome.
LYandroid said:
you are welcome.
Click to expand...
Click to collapse
i have trouble again. screen lock & radio isn't working.
do i have to change the firmware again?
drimtheater said:
i have trouble again. screen lock & radio isn't working.
do i have to change the firmware again?
Click to expand...
Click to collapse
witch firmware you have flashed?
LYandroid said:
witch firmware you have flashed?
Click to expand...
Click to collapse
yes. should i flash again? i use OS jelly bean 4.1.2 (official australia)
drimtheater said:
yes. should i flash again? i use OS jelly bean 4.1.2 (official australia)
Click to expand...
Click to collapse
you may need to change the firmware...if it doesnt solve the problem,flash a stock based custom rom like neatrom lite.
Did you flash the Australian xsa firmware? I've never had troubles with that, and have flashed it on multiple phones & different carriers. Maybe give that a shot.
Sent from a galaxy far, far away
Related
Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Aquacile said:
Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Click to expand...
Click to collapse
Please read the faqs and guides first .
See return to stock for warranty post in General section .
jje
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
sriram231092 said:
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
Click to expand...
Click to collapse
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Aquacile said:
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Click to expand...
Click to collapse
Yes download mode .
jje
JJEgan said:
Yes download mode .
jje
Click to expand...
Click to collapse
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Aquacile said:
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Click to expand...
Click to collapse
Fixed Thanks
my phone does not turn black screen, the music you hear when you turn, can not enter download mode
odin detects it but I try to install I get error
Galaxy s2 GT-I9100
cris1232 said:
my phone does not turn black screen, the music you hear when you turn, can not enter download mode
odin detects it but I try to install I get error
Galaxy s2 GT-I9100
Click to expand...
Click to collapse
could you explain it in better way .. what happened ??
is it dead or you cannot flash ROM through ODIN ?
akhil17kr said:
could you explain it in better way .. what happened ??
is it dead or you cannot flash ROM through ODIN ?
Click to expand...
Click to collapse
I try to install cmw came the exclamation error install a PDA that was not and I was left so the mobile
Sorry my english I am spanish
cris1232 said:
I try to install cmw came the exclamation error install a PDA that was not and I was left so the mobile
Sorry my english I am spanish
Click to expand...
Click to collapse
Okay.. Try to Flash Stock ROM again if ODIN failed.. and make sure kies process isn't running in background..
Also tell details about your Phone.
Model
ROM
Kernel
and which ROM you want to flash..
akhil17kr said:
Okay.. Try to Flash Stock ROM again if ODIN failed.. and make sure kies process isn't running in background..
Also tell details about your Phone.
Model
ROM
Kernel
and which ROM you want to flash..
Click to expand...
Click to collapse
GT-I9100
Android jelly bean 4.1.2 stock and the kernel I do not know
Try OXA europe version
i have install marshmallow 6.0.1 on my s2 it work well with pda i9100xwms1 after i will downgrade it on jellybean 4.1.2 i use a new rom official i9100xwms3 to flash after it reboot on Samsung logo. i think if i flash it to the first it will work so it is the same thinks it reboot on Samsung logo. please i need help to fix it.
i think that repartition can create this issue and how can repartition for jellybean and flash.
bauer145 said:
i have install marshmallow 6.0.1 on my s2 it work well with pda i9100xwms1 after i will downgrade it on jellybean 4.1.2 i use a new rom official i9100xwms3 to flash after it reboot on Samsung logo. i think if i flash it to the first it will work so it is the same thinks it reboot on Samsung logo. please i need help to fix it.
i think that repartition can create this issue and how can repartition for jellybean and flash.
Click to expand...
Click to collapse
Yes you need to repartition back to stock partitions I think. Your can search for a stock pit file for this.
BenjyTec said:
Yes you need to repartition back to stock partitions I think. Your can search for a stock pit file for this.
Click to expand...
Click to collapse
I get a Pit Stock will try and tell you
bauer145 said:
I get a Pit Stock will try and tell you
Click to expand...
Click to collapse
Fine it work well Thank
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
tecksulfur said:
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
Click to expand...
Click to collapse
Yes, using ODIN download the ROM for your device and flash it from your PC. Knox won't be triggered if it's and official ROM
Sent from S.G. S9+ Duos
What if I try to flash the new Android 9 with official rom for another country with the same PDA and CSC ?
G9650?
nothing yet for the snapdragon g9650 version?:confuso:
sentinelvdx said:
Yes, using ODIN download the ROM for your device and flash it from your PC. Knox won't be triggered if it's and official ROM
Sent from S.G. S9+ Duos
Click to expand...
Click to collapse
Thanks for the reply, but if I flash it with Odin, I will lose everything, is like Factory Reset. I would like to keep everything just as it is now.
tecksulfur said:
Thanks for the reply, but if I flash it with Odin, I will lose everything, is like Factory Reset. I would like to keep everything just as it is now.
Click to expand...
Click to collapse
U won't lose u data if u select FOR CSC - HOME CSC
WILL.13 said:
U won't lose u data if u select FOR CSC - HOME CSC
Click to expand...
Click to collapse
Ohh nice, I didn't know that. So if I choose for CSC -> Home CSC it won't erase my stuff? Nice, thank you very much!
tecksulfur said:
Ohh nice, I didn't know that. So if I choose for CSC -> Home CSC it won't erase my stuff? Nice, thank you very much!
Click to expand...
Click to collapse
Yh u won't
tecksulfur said:
Hi guys!
I have a question! I have a Galaxy S9+ (dual sim) and I would like to "dirty flash" the new Android P because I'm not getting the update via OTA for now. Is this possible without root?
Thank you!
Click to expand...
Click to collapse
Download new firmware and flashing with odin 13
Not failed
alimokhtarabadi said:
Download new firmware and flashing with odin 13
Not failed
Click to expand...
Click to collapse
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
ZaKaRia OuH said:
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=11410963190603881419
ZaKaRia OuH said:
Where did you get the firmware , or better where Can I download it ? Sammobile ? If yes , It is asking for a premium subscription.
Click to expand...
Click to collapse
No need for a premium subscription, just register and you'll be able to download it.
alimokhtarabadi said:
Download new firmware and flashing with odin 13
Not failed
Click to expand...
Click to collapse
Good for you. I only manage to flash the CSC one which clean flash my phone. Home CSC get stuck on something .img.
Hi. So I'm on stock Oreo with XME CSC. I have downloaded stock Pie with OXM CSC. What should I do in Odin if I want to upgrade the firmware without losing data?
twinh3ad said:
Hi. So I'm on stock Oreo with XME CSC. I have downloaded stock Pie with OXM CSC. What should I do in Odin if I want to upgrade the firmware without losing data?
Click to expand...
Click to collapse
The theory is just flash Home_CSC instead of the CSC one. You'll get 4 files from sammobile, but need only 3. Choose the home_CSC will not delete data. But as I mentioned above, my S9+ got stuck with Home_CSC so I have to flash the CSC ones. But @alimokhtarabadi successfully flash with Home_CSC, good luck to you.
Gody1313 said:
nothing yet for the snapdragon g9650 version?:confuso:
Click to expand...
Click to collapse
X2