Ok here is the deal.
I normally use a gel case on my phones. There fit the phones well and cover everything that needs to be.
But they make the phone a lil bit thicker and hide the phone. Normally I get a phone and want to see it for itself.
Well I brought a metal bumper and it looks nice.
But I see that the camera sticks out and touchs when sitting it down.
My girl says that the camera screen is glass and won't break or scratch, but I still like for the phone to not sit on it.
So I am wondering if there is anything I can put around the camera to protected.
I was thinking of something like a form pad so the camera wouldn't touch but idk.
I know some will say get one of the charger back but then it makes the phone thick and defeats the point.
Whole new lens cover assembly cost about $6 on e-bay and shouldn't be difficult to DIY, but you could get some small piece of thick one sided foam tape, cut it to shape and stick around the cam, why not. If it gets dirty or comes off, make new one. Personally I have not seen anything like that commercially, wait, actually there is lens mount you can glue around cam, it comes with small tele lens that you can attach on top.
pete4k said:
Whole new lens cover assembly cost about $6 on e-bay and shouldn't be difficult to DIY, but you could get some small piece of thick one sided foam tape, cut it to shape and stick around the cam, why not. If it gets dirty or comes off, make new one. Personally I have not seen anything like that commercially, wait, actually there is lens mount you can glue around cam, it comes with small tele lens that you can attach on top.
Click to expand...
Click to collapse
Yea I saw the replacements on eBay for like $10ship and I'm a tech person so I can replace it no problem.
And I didn't thing about the lens. I know they have a metal ring.
I'll check into everything.
Thanx.
I have a metal bumper also. I had an extra home button sticker that I sticked near the camera lens. Now when I lay flat down it doesn't lay on the camera lens.
Sent from my SM-N9005 using Tapatalk 2
I use skinomi clear skin. They include a skin for the bottom half of the camera. When my phone is laying flat the lens doesn't touch. As a bonus since you're using a metal bumper, the side skins can act as an all around protection between the bumper and the chrome trim. Much better than what the bumper comes with. But you will probably need to remove the ones on the bumper first as it will become too thick and the bumper won't fit properly.
Sent from my SM-N900T using Tapatalk
I am updated to Kitkat,unrooted. so s-view no work for me. Thats why I took the front flap of my white spigen slim armor view out, and let the back side on on white note3 ... gives it some kind of a z10-ish look.
coming back to the point, my case does the job well, apart from protecting the sides from scratches, by keeping the camera lens from having contact when lying flat. well, quite a hefty investment if you want to protect your lens only. but since I already purchased it, it does the job decently, and I dont find it that much of bulky. anyhow, bulky or not, to me - this is a question of habit. i mean, now that I look and take a grasp of my old i9100, it seems very small now, which wasnt the case some months back my two cents
Nitish
N1T15H said:
I am updated to Kitkat,unrooted. so s-view no work for me. Thats why I took the front flap of my white spigen slim armor view out, and let the back side on on white note3 ... gives it some kind of a z10-ish look.
coming back to the point, my case does the job well, apart from protecting the sides from scratches, by keeping the camera lens from having contact when lying flat. well, quite a hefty investment if you want to protect your lens only. but since I already purchased it, it does the job decently, and I dont find it that much of bulky. anyhow, bulky or not, to me - this is a question of habit. i mean, now that I look and take a grasp of my old i9100, it seems very small now, which wasnt the case some months back my two cents
Nitish
Click to expand...
Click to collapse
Yea i got a normal gel case for the phone. I have always use those without problems but i got a bumper for the note 3. It just feels better, so trying to keep the phone slim.
I thought about putting a dot of hot glue somewhere around it to lift it up. But i just didnt wanna do that to a new phone.
I want a square that would fit right around the camera and stick to the back plate.
Ill keep looking
the replacement lens piece is like $10, just something to think about
Related
Looking for a knock off (read: cheaper) version of this case. Main points im interested in are;
Completely flat back side (open around camera, thickness of the case should provide protection)
Single piece construction (i HATE the two piece snap on covers)
Thin overall construction (add only minimal bulk to the phone)
I have a TPU case and it would be great if the back was flat, the raised part around the camera causes the phone not to lay flat on its back, easy to rotate when sitting on a table and using it. The snap on cover i bought is constructed in a similar fashion, raised area around the camera. I believe the thickness of the case will be about the same dimensions of the protruding camera. Also, 2 piece clip on cases suck. Single piece, one click.
I feel there is acceptable quality cases out there, just tough sometimes to find the exact style. Thx guys.
http://www.amazon.com/Body-Glove-Fl..._1_7?s=wireless&ie=UTF8&qid=1312894906&sr=1-7
I figured something out to hold me over. As i suspected, the thickness of the TPU soft case is just barely thicker than the amount that the camera protrudes. A little time this morning with my pocket knife and voila!
You can buy a TPU case with a camera cut out. It will have a much cleaner look. You can probably buy off what for a few dollars.
Sent from my EVO 3D
mozman said:
You can buy a TPU case with a camera cut out. It will have a much cleaner look. You can probably buy off what for a few dollars.
Sent from my EVO 3D
Click to expand...
Click to collapse
Would really like to find a clip on single piece... Any links for either?
Sent from my S-Off & Rooted 3VO.
e_town said:
Looking for a knock off (read: cheaper) version of this case. Main points im interested in are;
Completely flat back side (open around camera, thickness of the case should provide protection)
Single piece construction (i HATE the two piece snap on covers)
Thin overall construction (add only minimal bulk to the phone)
I have a TPU case and it would be great if the back was flat, the raised part around the camera causes the phone not to lay flat on its back, easy to rotate when sitting on a table and using it. The snap on cover i bought is constructed in a similar fashion, raised area around the camera. I believe the thickness of the case will be about the same dimensions of the protruding camera. Also, 2 piece clip on cases suck. Single piece, one click.
I feel there is acceptable quality cases out there, just tough sometimes to find the exact style. Thx guys.
http://www.amazon.com/Body-Glove-Fl..._1_7?s=wireless&ie=UTF8&qid=1312894906&sr=1-7
Click to expand...
Click to collapse
What you linked is like the Case Mate Barely There Case. The only difference I notice is that the Body Glove version has a flat back side. The Case Mate has a bump out for the camera. If you are fine with the bump out, check out
CaseMate cheaper version
I got this and the other one listed on the site. They are the same, this is slightly more expensive.
Other Case Mate version, slight more $$
Both are extremely thin, minimal difference in size when holding the 3VO naked or with case.
Link
Alright, The case the box came is in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Zenus cases are the best I've seen so far for the Galaxy Note. I was thinking of getting this one as well but the color combinations just don't do it for me. Also, there's not cutout for the front speaker so it would be a little awkward to have to hold the front leather part back every time. I like that the case clips onto the metal part on the side and doesn't rest on the top of the phone so that a screen guard will thankfully be left untouched. I also love that it has a stand (The only reason I'm not getting the Zenus Masstige Stripe Case). I was wondering though, when the stand is set up, does the little latch (idk what it's called lol, the little thing used to clip on to the front cover to close the case) hide a little part of the screen since presumably, it'll be hanging down a little bit?
EDIT: Ordered it lol. It may have its flaws but it's the best I could find at its price range.
I have one of these (different colors, but this color looks great).
They are extremely high quality. As good or better than Vaja, for instance.
I've posted this before, that make sure you pay more and get the leather ones, as they have a few lines and some of the lines aren't as good quality.
This particular case is just great. The flap is a tad annoying but well worth it overall.
Note: one thing worth mentioning is that they are very light also.
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Hmmm...that's a tricky one. Obviously, it clips in tightly and securely so it might damage the skin during insertion and removal but once it's sitting in there, as long as you don't constantly remove it, it should be fine. I would recommend going to a store and testing out either this case or similar leather cases, but then again, if you harm the skin in the process, then this whole discussion is useless lol. On another note, why use a skin? The note is such a beautiful sleek beast. I wouldn't want to hide away any of the sides or take away from the beautiful protruding glass. That's why I hate my current Capdase Jacket XPose and am going for this case. Just increases the beauty XD. Anyways, yes, back on topic, I wouldn't recommend using a skin with this cover but hopefully someone who's actually tried it will reply.
Side-note: I ordered the Wine-Red / Dark Brown version
predation said:
would it be okay to use this case with a FULL skin applied? Ie. sides and back??
i'm sure the front would be okay, but just wanted to see if the sides of the phone with skin be okay.....
i've been looking at cases that have the flip cover, but they all look like it would peel off the side skins..... this one looks like it like it might be okay.
Click to expand...
Click to collapse
Here's a Flip case that would most likely not interrupt your skin.
Link
xCeejayy said:
The aluminum bumper wasn't doing it for me so I was looking around and I found this case. The colors are pretty subtle and calm. I'll update this with a review / pics of the case on when I receive it. I just wanted to share this case with you because it just looks so nice.
Link
Alright, The case came in the box it comes in is kind of girly, anyways the quality of the case is amazing! It doesn't feel like it was cheaply made at all. It doesn't add too much bulk and I can still fit it in my skinnys(Levi's 511 Skinny 29 x 30) front pocket. The buttons are easily accessible even the the volume button being covered by the front flap it is still easy to press / locate since the case has a steep cut out for the volume buttons. Aswell as the S-Pen being so easily accessible. An added perk i liked about this case is that the speaker hole is actually covered by its own mesh. It also has an accessory hole so you could attach an accessory / lanyard to it. The Magnetized kick stand does not interfere with signal(atleast none i can tell).
Album
Click to expand...
Click to collapse
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
drkalo said:
These Zenus cases look great and seem very usable. But the downside is that they have a magnet at the back that interferes with S-pen functions (not with the signal). Check in the screen area in front of the magnet by trying to draw several long thin lines with the SPen that cross this area. That case was a money waste for me...
Click to expand...
Click to collapse
I tried this and it works fine for me Maybe contact Zenus for another one?
xCeejayy said:
I tried this and it works fine for me Maybe contact Zenus for another one?
Click to expand...
Click to collapse
I got these symptoms after a couple of days usage. I contacted the dealer and got a substitute with Capsule Stand Slide Series - White / Lime
When I got my Note off CL came with the Eel leather case. It's slick but I wish it was the capsule.
Sent from my SAMSUNG-SGH-I717 using xda premium
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
Since owners have had the phone a for a bit longer now, I would like some feedback on those screen protector choices you have made.
Basically what I want is the common things:
*As invisible as possible.
*Smooth feeling to the touch is preferred.
*easy to apply is a plus
*I prefer to not remove the sony one already there.
So I was looking at M.glass, other ebay glass ones and then my usual choices like Zagg HD the case friendly version for the plasticky ones.
So what is working out for you guys?
I bought one off of ebay http://www.ebay.com/itm/261323055474?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It feels nice when you put it on. I got something stuck under it though so if you are installing one make sure your phone is perfectly clean. I like the feel of it better than the normal screen. It was hard to install well for me but probably not as hard as I made it out to be. I had it perfect but removed it to get the thing from under it out and that is where things went wrong.
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
shaolin95 said:
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
Click to expand...
Click to collapse
i have the Armorz Stealth Extreme R on mine. a bit on the pricey side but i love it. I also have one of the ebay ones for the back glass. both were put on over the stock sony screen protectors. on the back piece, i actually soaked the back of the screen with a spray bottle before applying it. It was a pain in the ass pressing out all the bubbles, but it looks flawless after a bit of elbow grease.
I have Glass-M front+back for mine and I absolutely love it. (Removed factory ASF as well). My notes
* It is really smooth. Like freshly made toffee it is so smooth it feels faintly greasy (but it is not). On an almost completely flat table the phone will slowly slide across the surface by itself due to a slope you can't see (be careful)
* I believe touch sensitivity is improved. Finicky DPI sliders in Paranoid Android setups give me no trouble now - before jumping 239,243,241 when I really want 240 dpi exactly. Pencil also works perfectly as a stylus.
* I believe screen brightness and clarity are improved. Subjective and probably due to removal of the ASF (and its invisible tiny scratches)
* Extra glass makes the phone a bit thicker but also much stiffer and I liked this. I also have a Z1 and I miss how solid that phone felt in my hand. Ultra always felt a bit too flimsy (bendy). I also had to widen the slot on my DK30 (sandpaper glued to a flat stick aka big emory board)
* Getting alignment correct is tricky - glass-M slightly smaller than the phone screen edges. Mine went on crooked but I can live with that.
* No dust or bubbles in mine. Used the shower trick of old school film photographers. Long hot steamy shower will effectively clean the room of even tiny dust particles.
* Removing the ASF is a truly harrowing experience (see the other thread). Halfway through you *will* have an "Oh God what have I done" moment. Still totally worth it.
Hope my ramble helps someone. In summary really happy with the Glass-M. :good:
shaolin95 said:
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
Click to expand...
Click to collapse
Haha yeah I took it off and it made it way worse... ended up being a waste of money which has been happening a lot since my phone had been sent back for repair. I have wasted so much money. But yeah I bought another one and got it a couple of days ago but have not opened it. I will install it right when my phone gets back.
So when you guys go dual glass (front and back I mean) do you just carry it without a case? I mean, when I remove mine from the case it just feels SOOOO good to hold, like the case makes it feel not as ergonomic even though you will think is just one flat object
shaolin95 said:
So when you guys go dual glass (front and back I mean) do you just carry it without a case?
Click to expand...
Click to collapse
Glass-M Front+Back and I carry mine "au naturel". Four weeks of sliding in and out of pocket + keys, coins, cig. lighter etc with no marring or scratches. Seriously it feels way better in my hand than the factory finish: smoother, bit thicker (2x 0.25mm glass + adhesives is a lot on a 6.5mm phone), and far more solid. Absolutely love its handling after placing the extra glass.
Downsides are metal sides will eventually pick up scratches and dents and also I don't like the proximity sensor cutout: messes with the Sony design and makes it look like everybody else's iPhone/Samsung/whatever with slots cut into the front of the phone. I don't believe the cutout is necessary for that sensor to work. (could be wrong about that)
n0bleINtP said:
Glass-M Front+Back and I carry mine "au naturel". Four weeks of sliding in and out of pocket + keys, coins, cig. lighter etc with no marring or scratches. Seriously it feels way better in my hand than the factory finish: smoother, thicker (2x 0.25mm glass + adhesives is a lot on a 6.5mm phone), stiffer and more solid. Absolutely love its handling after placing the extra glass.
Downsides are metal sides will eventually pick up scratches and dents and also I don't like the proximity sensor cutout: messes with the Sony design and makes it look like everybody else's iPhone/Samsung/whatever with slots cut into the front of the phone. I don't believe the cutout is necessary for that sensor to work. (could be wrong about that)
Click to expand...
Click to collapse
yup. I carry it without a case now. feels super classy. picked up some weight from the dual glass but I'm not worried about scratching the screen compared to using the phone fresh out of the box.
Sent from my C6833 using xda app-developers app
Ah you guys are going to make me join the nudist colony!
Well I got too many cases already on the way but they will live in the car to be used when required, but for the most part I love the feel of it naked....and we are still talking about phones just before someone locks the thread
Does the glass go all the way to the edges of the phone? Like if I use one of those cases that go just above the screen (if those will even fit which I doubt) will it make the glass come off?
I guess I should just not use a case but gosh I bought a couple of nice ones already LOL
shaolin95 said:
Does the glass go all the way to the edges of the phone? Like if I use one of those cases that go just above the screen (if those will even fit which I doubt) will it make the glass come off?
I guess I should just not use a case but gosh I bought a couple of nice ones already LOL
Click to expand...
Click to collapse
incipio feather worked with front glass. it worked with back glass too but feels super snug.
Sent from my C6833 using xda app-developers app
Thats a very nice looking case...I just wish they would have left the charging port open..kind of strange they did not make a cut for that :/
Well, I guess I use it without a case at home and at work right now anyway since with my case it wont fit on the DK30 but still, if I were to use a single cable, that case wouldnt let me charge.
shaolin95 said:
Thats a very nice looking case...I just wish they would have left the charging port open..kind of strange they did not make a cut for that :/
Well, I guess I use it without a case at home and at work right now anyway since with my case it wont fit on the DK30 but still, if I were to use a single cable, that case wouldnt let me charge.
Click to expand...
Click to collapse
I modified the case to leave opening for magnetic charging port. some use a dremel. I used a razor blade. came out looking how it was supposed to be, but since I got the back glass, I don't use it anymore. lol
Sent from my C6833 using xda app-developers app
yeah maybe I bought cases for decoration now LOL We shall see.
I just thought of one possible issue if I get the Glass-M vs getting a single one for the screen only....I want to get one of those extended batteries case combinations.
So if I get that, I am pretty sure it wont fit with the Glass-M but maybe it will fit if I only get one glass for the front?
I'm getting my glass-m protectors today. I'll post my opinion tomorrow some time
Cool!
I got one of the front glass only protectors from ebay. Still waiting for it to arrive to see if I can deal with it.
I should have gotten the Glass M but I dont feel like modding the DK30 which I will probably have to do anyway
shaolin95 said:
Cool!
I got one of the front glass only protectors from ebay. Still waiting for it to arrive to see if I can deal with it.
I should have gotten the Glass M but I dont feel like modding the DK30 which I will probably have to do anyway
Click to expand...
Click to collapse
Got my Glass-M protector yesterday put it on this morning. It works great. Its' pretty comparable to the spigen tr I had on my S4 maybe a littler thinner. It includes the front and back glass protectors, rear camera cutout was perfect. The front appears to cover the camera. There is a cutout for something to the left of the camera but I'm not really sure why. Maybe I am misunderstanding the layout? Luckily it laid down well enough that its not causing any distortiong.
It actually feels nicer and seems more fingerprint resistant than the stock bare screen with its ASF film. It's an expensive kit but considering both front and rear protectors are glass it seems like its worth the money to me.
Shipping was also really fast considering it came from hong kong....about 5 days.
So I ended up trying this glass one:
Protector
The feeling and quality of the image is so pristine compared to my previous regular plastic like protector!
I did have to sand paper the DK30 a bit to make it fit but all is good. I still can use all my cases if needed and I left the plastic protector for the back part.
So overall, I think I will keep this one because with the dual Glass M ones, I dont think my cases will work nor the Charging case combo I want.
With the size of this phone and the Explosion proof glass...I feel like Captain America now
https://nl.aliexpress.com/item/Back...176.html?spm=a2g0s.9042311.0.0.c5334c4ds3M96d
I always buy 5 at a time whenever I get a new phone,
Pretty sure they have some glass for the front camera too.
bought something like this but it was moving, getting dirt there, end up throwing it away
now i am just using case so camera it's flush with case, had to cut protruding camera protection though
I had similar glass protection on my Moto Z and its not so good, as the guy above me mentioned, it gets dirt and scratches all over and it will be useless in no time and your camera will be the same with it applied.
PeterMarkoff said:
bought something like this but it was moving, getting dirt there, end up throwing it away
now i am just using case so camera it's flush with case, had to cut protruding camera protection though
Click to expand...
Click to collapse
really? i had this for moto x4.
sticked very well. no dirt in between.
no effect onpictures taken.
please show a picture of your modded case i d like to see what it looks like.
i just modded a flip case to open up up/backwards instead of downwards.
i dont understand why they dont make em like that tbh.
i also cutted out the magnets so they Dont mess with the signals (compass was messed up for example)
protectors have arrived and so far they havent moved.
i do have that customized flip cover so theres never any friction on the camera.
Maybe it would be different in the latter case.
I bought the lens protection. In few days it moved and got dirt under it.
Some days later I noticed its already gone
Found it in my pocket a week later.
my first one is still sticking very well.
i have to say i have used it with a bookcase so there's never any friction on the glass protector due to raised edges.
i tried moving it with my finger tho and it seems to be sticking on it quite firmly still.
double post
I bought one for my mi mix 2s in aliexpress pretty cheap 1 and a half euro