How i can return to stork ROM without flashing via RSD or Flast IT utirlity? I want to return to stock Android 4.0.4 to install SS recovery and install CM11
If i will do Hard Reset of my device, will my device return to stock ROM?
Sorry for my english))
Related
Well... I've installed the v20c with the "russian way"... and then I've installed the GB_2.3.3_v2 ROM, but I've having some troubles with several apps which for me are ESSENCIAL
I want to return to the original ROM,... so I'm wondering... can I do it just flashing it in recovery mode? wiping everything and stuff..?
Thanks
when i tried to flash a custom rom.....firmware failed and now i cant reboot my device....i can just bring it in download mode....i cant bring it to cwm recovery mode......when i m tryin to reboot device the screen starts and says firmware upgrade encourted an error...tyr recovery mode in kied and try again..........what happedned ......i have rooted device.....inhad flashed roms many times...but this happened to me first time.....did i brick my phone .....can be recovered back?please guide me urgent......
You should flash back to stock ROM for testing.
Make sure your phone working well with stock ROM, then make everything again for custum ROM (Root, flash CWM Recovery, ....)
So here is the situation. I have decided to return my Note to AT&T. Since I decided to flash an ICS leak after the flash counter reset was found, I just went ahead and flashed CWM then flashed a the Alpha2 ICS. This means my nandroid of my stock does not have root.
I am back on Stock ROM and Radio without root, but I still have CWM. Since I don't have root, I can't use the ADB method to replace stock recovery. Is there a CWM flashable of the stock recovery? Or do I have to flash the rooted stock, then use ADB to put stock recovery, then flash the unroot.tar?
Any help would be appreciated.
Phone has been returned
Decided since time spent flashing was better than sitting I just went ahead and flashed a rooted stock
No issues?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I was wondering if you can flash the stock recovery while running the Pure Stock Rom? I have read the return to stock thread and can not make heads or tails out of it. One says if you do it this way you still can't Update back to ICS. Another Says You can but you have to add Something to the process. The Radio I think. Is there a clear cut way to return the Note back to stock and be able to update it back to ICS? Or can you just flash the Pure Stock Rom and flash the Stock Recovery that came with the Phone when it had GB on it?
Pure stock from bigfau is rooted ..
Odin .tar is not...
Flash .tar rom via odin ..
Then flash your stock radio via CWM (flash CWM)
Flash counter reset via CWM
Then flash the stock 3e recovery in CWM
Then reboot ...
You will then be able to get update ...as you will be pure stock...g
Hello, I've been trying to flash the Australia JB rom,
SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_NZ_CFC_HWp2b_SIGNED.xml.zip,
onto my Asia razr running on ICS.
I want to leave my current ICS as system 1 and flash the Au rom onto system 2, but I keep getting this error.
Finding update package..
Opening update package..
Installing update...
Installation aborted.
Here is what I did:
1.download 4.1.2 kernel and ROM zip file
2.Boot to BMM recovery
3.backup CID and Kernel
4.Flash 4.1.2 kernel , wipe cache
5."install a zip package"
then installation aborted.
Is is not possible to flash stock ROMs onto system2, but only custom ROMs?
If the only way to flash AU rom is onto system1, how would I be able to backup and restore my current ICS? ( Can I even go back to ICS after flashing JB?)
What am I doing wrong here?
Thank you all :good::good:
ab. said:
Hello, I've been trying to flash the Australia JB rom,
SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_NZ_CFC_HWp2b_SIGNED.xml.zip,
onto my Asia razr running on ICS.
I want to leave my current ICS as system 1 and flash the Au rom onto system 2, but I keep getting this error.
Finding update package..
Opening update package..
Installing update...
Installation aborted.
Here is what I did:
1.download 4.1.2 kernel and ROM zip file
2.Boot to BMM recovery
3.backup CID and Kernel
4.Flash 4.1.2 kernel , wipe cache
5."install a zip package"
then installation aborted.
Is is not possible to flash stock ROMs onto system2, but only custom ROMs?
If the only way to flash AU rom is onto system1, how would I be able to backup and restore my current ICS? ( Can I even go back to ICS after flashing JB?)
What am I doing wrong here?
Thank you all :good::good:
Click to expand...
Click to collapse
1. YOU CANNOT FLASH A OFFICIAL STOCK ROM ONTO SLOTS USING BMM OR ANY RECOVERY - You need to flash in AP fastboot using Flash-it or RSD lite.
2. When you have ICS in stock , you are telling its Asian - try to flash only EU JB roms - here is the link http://forum.xda-developers.com/showthread.php?t=2192532 ( Remeber you need to flash EU ICS ROM before updating the OTA as you are in en.Asia- follow the instructions )
3. Since JB is a update over ICS , you cannot go back to ICS as there is no firmware file for this JB ( remember this is an update)
SAJdroid said:
1. YOU CANNOT FLASH A OFFICIAL STOCK ROM ONTO SLOTS USING BMM OR ANY RECOVERY - You need to flash in AP fastboot using Flash-it or RSD lite.
2. When you have ICS in stock , you are telling its Asian - try to flash only EU JB roms - here is the link http://forum.xda-developers.com/showthread.php?t=2192532 ( Remeber you need to flash EU ICS ROM before updating the OTA as you are in en.Asia- follow the instructions )
3. Since JB is a update over ICS , you cannot go back to ICS as there is no firmware file for this JB ( remember this is an update)
Click to expand...
Click to collapse
Hi SAJdroid
I ended up flashing a modified JB rom onto system 2 with BMM because I might need to go back to ICS if JB is buggy.
Thank you for answering my questions.:good:
ab. said:
Hi SAJdroid
I ended up flashing a modified JB rom onto system 2 with BMM because I might need to go back to ICS if JB is buggy.
Thank you for answering my questions.:good:
Click to expand...
Click to collapse
Golden Rule for first time flashers :
1. Backup your system - Nandroid backup
2. Download the fastboot files and keep it ready in your PC with RSD lite - When you brick your phone you dont have much time to flash your system as the battery charging may not work. link : http://sbf.droid-developers.org/ * you will never know how much battery you will be left with if you accidentally brick your phone*
3. If you are afraid you might screw up while flashing a ROM , use Safe Strap instead of BMM ( uninstal BMM before you proceed) - here no matter what you do your stock ICS will be safe ans you wont be able to flash anything over your stock slot . - Most of the ROM's are supported by Safe Strap.
I have bricked my phone so many times but still enjoy flashing - so dont be afraid to try those awesome ROM's and tweaks to feel the real power of your Razr.