Hello,
After a flash update the phone does not restart…
When I try to flash it, I have a error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054) [EMI] Obtain DRAM Failed!"
However I think that my phone is not a true Goophone, Before the fatal flash, I have test and make a backup with MTKDroidTools and It was stated that the processor was a MTK6589, but it was a fake and it was actually a MTK6572 …
I have the same problem when I use my original Backup…
For information, when I plug my phone on the computer, the device manager said "MediaTek USB Port(COM7)"
Can you help me?
Up.... Help :crying:
... Up of the day...
Related
My phone is ZTE U807.
It cannot boot or enter the recovery.
My computer can find the "MTK USB Port (COM8)".
I have tried to use SPMultiPortFlashDownloadProject but it says
Error: S_DA_DRAM_NOT_SIPPORT(3004).
And SP_Flash_Tool_v3.1222.00, it says
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!.
I have been looking for solutions for a long time. If someone can help me, I will be very appreciate.
pockty said:
My phone is ZTE U807.
It cannot boot or enter the recovery.
My computer can find the "MTK USB Port (COM8)".
I have tried to use SPMultiPortFlashDownloadProject but it says
Error: S_DA_DRAM_NOT_SIPPORT(3004).
And SP_Flash_Tool_v3.1222.00, it says
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!.
I have been looking for solutions for a long time. If someone can help me, I will be very appreciate.
Click to expand...
Click to collapse
RIP
hey
pockty said:
RIP
Click to expand...
Click to collapse
soo does the usb connection to pc fully work?
Can you boot into the bootloader? Maybe get fastboot running? If you can - oh, you got it easy. just take a look here: http://forum.xda-developers.com/showthread.php?t=2225405
Hello there!
I'm guessing you have bricked your bootloader. This can mostly happens by flashing a bad recovery. You may want to take for service.
Hope that helps.
My phone is i phone 5s clone mt6575
It cannot boot or enter the recovery.
My computer can find the "MTK USB Port (COM5)".
I have tried to use SPMultiPortFlashDownloadProject but it says
Error: S_DA_DRAM_NOT_SIPPORT(3004).
And SP_Flash_Tool_v3.1222.00, it says
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!.
I have been looking for solutions for a long time. If someone can help me, I will be very appreciate.[/QUOTE]
pockty said:
My phone is ZTE U807.
It cannot boot or enter the recovery.
My computer can find the "MTK USB Port (COM8)".
I have tried to use SPMultiPortFlashDownloadProject but it says
Error: S_DA_DRAM_NOT_SIPPORT(3004).
And SP_Flash_Tool_v3.1222.00, it says
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!.
I have been looking for solutions for a long time. If someone can help me, I will be very appreciate.
Click to expand...
Click to collapse
What is your Phone's Model?
Edit:I see it
(Sorry for bad english)
---------- Post added at 11:41 PM ---------- Previous post was at 11:39 PM ----------
https://sites.google.com/site/zteopenfirmware/download-mode
i have an Neken N6 it is a MTK6589T phone. Its not a clone. So what happened: the software had a problem so i had the brillant idea to flash a rom that were explained as the official ROM for this device. After the flash the phone its like dead not turn on ecc...
If i take off the battery and get back it the pc see the phone, as MediaTek USB VCOM port in the hardware of win.
If i try to reinstall the previous rom with SP Flash Tool i get this error:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL 4032
EMI Enable DRAM Failed
i was trying to see this post that seems to have my same problem but didn't understand how he solved. Didn't understad the question about this preloader file
Some one could help me?
Thank you
I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with micromax official stocked image jb 1.11 with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
help me ASAP please
_frak__ said:
I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with micromax official stocked image jb 1.11 with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
help me ASAP please
Click to expand...
Click to collapse
From what i see in your picture you should use Firmware Upgrade not Download. If you use Download format first your flash memory.
Waiting for reply...
Sent from my Lenovo P780
i have done that too but no success as i know internal memory is damaged
is there any way if i can make a partition in memory card as internal memory to load ROM
_NODL_PRO_INFO: failed to get PMT info
this is what i am getting while upgrading
Dear -frak- i have the same problem. Any solution if you have been solved these problem?
Thanks
antozz said:
Dear -frak- i have the same problem. Any solution if you have been solved these problem?
Thanks
Click to expand...
Click to collapse
BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) – BROM Error 5069
BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) meant that the file which you are trying to flash is larger than the available space or your mobile device partition. Ensure that the file that you are trying to flashing is exact for your model, also try another ROM.
Maybe you are trying to flash 8 GB ROM?
Can someone give me a 4gb rom for mmx a116?
maniche0201 said:
Can someone give me a 4gb rom for mmx a116?
Click to expand...
Click to collapse
Did you tried here : http://forum.xda-developers.com/micromax-a116
Hi All!
I try to flash a new rom but i did something wrong and the flashtoll write this problem:
Optain Dram failed.
How can i solve it my phone not respond and i cant turn on .
PLs help me thanks for all.
hi friends i am new at this forum and need some help, before this, I usually figured everything out by reading others thread or googling. But now I need your help guys. I recently try to flash my i ball cobalt 4 with the stock rom of the same version [downloaded from needrom.com],But I probably did a mistake and I was messing up with bootloader. The result is that my phone wont even start. No bootloop, no recovery, nothing. Display and everything else remains dead.
At least is phone still detected by computer when I connect it as mtk usb port[it is on META mode now i think]
Also in Smart Phone Flash Tools phone is still visible.
But when I try to flash or format anything it gives me this error message:
It says:
"BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]: Please check your load matches to your target which is to be downloaded"
I already tried different versions of SPFT and also stock cobalt 4's ROM's from diferrent sources.cleaned mtk deivers many times by using usbdeview according to tutorial. but sadly did not get any success.
My OS is Windows 7x64.
Please guys, this is the first time I'm asking for a help, because I am really desperate and I don't know what else try to make my phone flashable and working again. I googled, searched lot of topics, everything what I was capable to think about. I would be super gratefull for help.
THX guys for your suggestions and help!!!
BTW: I heard some phones can be turned to some kind of "service" bootloader mode with connecting two contacts on main board of phone. Do you know if iball cobalt 4 have this function?
one more thing is that when i selected scatter file first time in spft it gave me an error invalid scatter file so i had to delete scatter file's first line[ie birdtoolminver3.4].so is the scatter file is problem of mentioned error.