Hello,
After tons of downloaded ROM's and weeks of webpages reading I' am still stuck in unbricking my Chinese tablet. These are my system specs:
Model: SAWEE10
Android: v2.3_20110926
Kernel: 2.6.32.9
Build: FRF85B
Mainboard: WWE101-MAIN (ver 3.4 2010/11/19)
Charger: 9V
No matter which version of ROM I have tested my device remains stuck at "Updating Image Linux-2.6.32.9" using a MicroSD prepared with WinHEX. Also the USB conection doesn't work anymore. It does start but freeze at Android green logo even if I left it for days. Can anyone help me with a correct ROM and flashing steps for this model? Many thanks in advance.
go back to where you purchased your tab from and download the rom for you tablet. the SAWEE10 is false.. i ran across that the software is a false positive.. the Tab is a 2.2 system not 2.3.. if it had superpad on the box it is a clone running on a unstable rom version from Ibex who makes the real flytouch 3. the best thing is to see if the seller have the original rom to flash your tablet.. i returned mine back and purchased a real system like acer iconia 500 from a box store.. have no problems since..
hope that helped..
Yes it's a pathetic clone and it seems that I have installed a wrong ROM version; also I wasn’t smart enough to make a copy of the original ROM (of course, my fault).
I have tried most of the ROM's present on the forums but the flashing operation freeze on "Updating Image Linux-2.6.32.9" and I don't know why. I have used the Flytouch ROM recovery, with WinHex SD formatting, and those images (ramdisk, system, userdata, etc) but doesn't work. Can be this Linux image writted separately?
try this it may help
androidtablets.net/forum/superpad-ii-firmware/12403-firmware-releases-firmware-files-benefits-bugs-flytouch2-v2-superpad-2-a.html
androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
poke around there you might find something
I have a 10.1 android tablet that was advertised as a Flytouch 10 superpad on but after a bit of research I discovered that it's a O.E.M/O.M.D tablet I used it for about 2 hours turned it off as I had things to do I turned it back on the manufacturer logo appeared then the silver android logo waited for a while then went back to manufacture logo then andriod again the process keeps repeating till battery goes flat found out it stuck in boot loop contacted seller said need Flash update via tf card (brand new 4G ) and use diskgenius.exe / Diskman_3.8.0 then burn software to card. The software is available in iuw_2.0.15a_beta_20121106 was on my friends P.C for 5 hours trying to do this and got nowhere really need help/advice manufacturer said would take full responsibility if it gets bricked been to various computer shops nobody will touch it or even try for me in Bolton area help me pleeeeeease
Do a google search for iuw, or Infotmic upgrade tool, or infotmic upgrade utility. That's the software used to flash them but you would still have to find the O.E.M. OS. May be try to boot into recovery via ADB(Android Debug Bridge) and try to attempt a system dump of your tablet.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Dear all
I am using Merlin Tablet PC 3G 7 inch (ICS 4.0 i think ) and i purchased it from dubai and after 3 months from date of purchase its not booting completing and getting stuck at start-up . I already did hard reset by pressing power button + Volume UP but failed and still stuck at start up
Snaps attached in zip file(Mother Board model number and snap of stuck screen at start-up)
Manufacturer : Merlin Digital
If any one knows how to install new ICS ROM 4.0 and from where i can download then please let me know
Regards
Same problem dude
mafnan said:
Dear all
I am using Merlin Tablet PC 3G 7 inch (ICS 4.0 i think ) and i purchased it from dubai and after 3 months from date of purchase its not booting completing and getting stuck at start-up . I already did hard reset by pressing power button + Volume UP but failed and still stuck at start up
Snaps attached in zip file(Mother Board model number and snap of stuck screen at start-up)
Manufacturer : Merlin Digital
If any one knows how to install new ICS ROM 4.0 and from where i can download then please let me know
Regards
Click to expand...
Click to collapse
I have the same problem, can anyone make a backup of their rom/firmware throught MdkDroidtools ?
hi guys i have a 7" irulu expro tablet andriod os 4.4.2 tablet 2 camera quad-core processers.I flashed CWM.zip onto my recovery
Heres the link https://www.google.com/url?sa=t&rct...u3AE7m4COzQEkr2TQ&sig2=tbkZSKlSCMegzv6hlzliZg
And then went into settings backup and reset and clicked on boot into recovery.now my device is stuck on the andriod logo and just stays there i tried connecting it to my pc but nothing happens its not even coming up on device manager.
is there anyway to fix this?Is my device bricked? the OS is fine its just that i flashed a zip over my recovery please can anyone help
me? Thank You
The link below is a quick guide anyone with an iRulu tablet that is stuck. Please pay it toward. It took me a month to figure out this shizzel.
https://drive.google.com/folderview?id=0B4fv54ZqdbASRWpYR21pRG9CUFE&usp=sharing
Chiseled brail into stone translated via N5
Hello XDA, I'm having issues with this tablet and was wondering if anyone can give me a hand.
The tablet was working fine, i tried to root it, it seemed to have worked but now every time the tablet is restarted it wipes everything, every time you have to do the initial setup which is really annoying, i tried doing a hard reset by going into recovery with no luck
When doing the reset it gives a bunch of errors mostly that the cache is not available which i assume is were the data for the reset was stored.
Here is my tablet info:
Serial:
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #32
Build Number: KVT49L.20150713
Has anyone successfully installed a custom recovery for this tablet? If so were can i get a copy to flash it and see if this solves this issue. I got in touch with the irulu people and they gave me a link for the firmware but is not working, https://www.irulu.com/download/lists?sn_number=X1781KX1507201E1224
I have just yesterday the same problem, exactly with the same tablet. I do the rooting with NewKingrootV4.80. Now I'm trying to connect the tablet to the FlashTool downloaded from iRULU site. But the program don't see the tablet (Phoenix suite); tablet in debugging mode. I'm tryng to update the program, automatically, from 1.0.4 version to 1.10, but after 3-4 minuts all become stopped....now I search the program, last version, directly on iRULU site.... Have you some news with your tablet???
this firmware worked on my irulu x7 expro x1 to get it unrooted
hxxps://cloud.mail.ru/public/MDsx/chr73KBTp
replace xx with tt
use phoenix suit, and all is good, no more back to square one after power off
Hi there,
I received the same tab today (the kids version but the specs are the same)
I managed to get it rooted by using kingo root.
hxxp://www.kingoapp.com/android-root/download.htm
Then I replaced kingo root with supersu using this link:
hxxp://androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
I hope this will help for you to.
(replace 'xx' in links with 'tt')
Same issue with my tablet with following specs
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #33
Build Number: KVT49L.20150806
Any updates?
My Irulu expro X1 does not even come up to where anything can be entered. Only goes through the reboot with the Irulu screen then expro X11 then blank.
I want program FLASHING
Are people still working on this tablet? I was able to get twrp working (once) but now I fear I bricked my device. I got a twrp image for the rom and flashed it, clicked boot to recovery (from within os) and all seemed well. It loaded twrp and I immediately did a twrp backup and clicked reboot -> system (from twrp) it gave me a boot loop. Nbd I thought I'll go back into recovery and clear cache. Tried all the usual (pwr + up) (pwr + dwn) (pwr + both) combos and it will not go past Irulu screen. Help!
NM Folks I got 'er back online. Had to flash a new firmware.
hello. I just purchased a projector (Mod X3 (W200); Build-KOT 49H.20151102 test keys. It was suppose to be android 6.0 but is 4.4.1. Is there a way to get software to upgrade to at least 5.1.1 several pgms do not work under he 4.4.1 version. Please let me know at [email protected] Thanks in advance.
I flashes that firmware and it result with a problem, I have an inverted touch in the narrow side, how can I fix that?
---------- Post added at 07:13 PM ---------- Previous post was at 06:57 PM ----------
This one... hxxps://cloud.mail.ru/public/MDsx/chr73KBTp