Irulu eXpro X1 7Inch Tablet Firmware issue - Android Q&A, Help & Troubleshooting

Hello XDA, I'm having issues with this tablet and was wondering if anyone can give me a hand.
The tablet was working fine, i tried to root it, it seemed to have worked but now every time the tablet is restarted it wipes everything, every time you have to do the initial setup which is really annoying, i tried doing a hard reset by going into recovery with no luck
When doing the reset it gives a bunch of errors mostly that the cache is not available which i assume is were the data for the reset was stored.
Here is my tablet info:
Serial:
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #32
Build Number: KVT49L.20150713
Has anyone successfully installed a custom recovery for this tablet? If so were can i get a copy to flash it and see if this solves this issue. I got in touch with the irulu people and they gave me a link for the firmware but is not working, https://www.irulu.com/download/lists?sn_number=X1781KX1507201E1224

I have just yesterday the same problem, exactly with the same tablet. I do the rooting with NewKingrootV4.80. Now I'm trying to connect the tablet to the FlashTool downloaded from iRULU site. But the program don't see the tablet (Phoenix suite); tablet in debugging mode. I'm tryng to update the program, automatically, from 1.0.4 version to 1.10, but after 3-4 minuts all become stopped....now I search the program, last version, directly on iRULU site.... Have you some news with your tablet???

this firmware worked on my irulu x7 expro x1 to get it unrooted
hxxps://cloud.mail.ru/public/MDsx/chr73KBTp
replace xx with tt
use phoenix suit, and all is good, no more back to square one after power off

Hi there,
I received the same tab today (the kids version but the specs are the same)
I managed to get it rooted by using kingo root.
hxxp://www.kingoapp.com/android-root/download.htm
Then I replaced kingo root with supersu using this link:
hxxp://androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
I hope this will help for you to.
(replace 'xx' in links with 'tt')

Same issue with my tablet with following specs
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #33
Build Number: KVT49L.20150806
Any updates?

My Irulu expro X1 does not even come up to where anything can be entered. Only goes through the reboot with the Irulu screen then expro X11 then blank.

I want program FLASHING

Are people still working on this tablet? I was able to get twrp working (once) but now I fear I bricked my device. I got a twrp image for the rom and flashed it, clicked boot to recovery (from within os) and all seemed well. It loaded twrp and I immediately did a twrp backup and clicked reboot -> system (from twrp) it gave me a boot loop. Nbd I thought I'll go back into recovery and clear cache. Tried all the usual (pwr + up) (pwr + dwn) (pwr + both) combos and it will not go past Irulu screen. Help!
NM Folks I got 'er back online. Had to flash a new firmware.

hello. I just purchased a projector (Mod X3 (W200); Build-KOT 49H.20151102 test keys. It was suppose to be android 6.0 but is 4.4.1. Is there a way to get software to upgrade to at least 5.1.1 several pgms do not work under he 4.4.1 version. Please let me know at [email protected] Thanks in advance.

I flashes that firmware and it result with a problem, I have an inverted touch in the narrow side, how can I fix that?
---------- Post added at 07:13 PM ---------- Previous post was at 06:57 PM ----------
This one... hxxps://cloud.mail.ru/public/MDsx/chr73KBTp

Related

[Q] Correct ROM for SAWEE10 tablet

Hello,
After tons of downloaded ROM's and weeks of webpages reading I' am still stuck in unbricking my Chinese tablet. These are my system specs:
Model: SAWEE10
Android: v2.3_20110926
Kernel: 2.6.32.9
Build: FRF85B
Mainboard: WWE101-MAIN (ver 3.4 2010/11/19)
Charger: 9V
No matter which version of ROM I have tested my device remains stuck at "Updating Image Linux-2.6.32.9" using a MicroSD prepared with WinHEX. Also the USB conection doesn't work anymore. It does start but freeze at Android green logo even if I left it for days. Can anyone help me with a correct ROM and flashing steps for this model? Many thanks in advance.
go back to where you purchased your tab from and download the rom for you tablet. the SAWEE10 is false.. i ran across that the software is a false positive.. the Tab is a 2.2 system not 2.3.. if it had superpad on the box it is a clone running on a unstable rom version from Ibex who makes the real flytouch 3. the best thing is to see if the seller have the original rom to flash your tablet.. i returned mine back and purchased a real system like acer iconia 500 from a box store.. have no problems since..
hope that helped..
Yes it's a pathetic clone and it seems that I have installed a wrong ROM version; also I wasn’t smart enough to make a copy of the original ROM (of course, my fault).
I have tried most of the ROM's present on the forums but the flashing operation freeze on "Updating Image Linux-2.6.32.9" and I don't know why. I have used the Flytouch ROM recovery, with WinHex SD formatting, and those images (ramdisk, system, userdata, etc) but doesn't work. Can be this Linux image writted separately?
try this it may help
androidtablets.net/forum/superpad-ii-firmware/12403-firmware-releases-firmware-files-benefits-bugs-flytouch2-v2-superpad-2-a.html
androidtablets.net/forum/gome-flytouch-ii-firmware/16530-rom-guide-superpad-flytouch2-wwe10-android-2-2-v2-1-3925-usb-flashing.html
poke around there you might find something

[Q] tablet help

sorry couldnt find android tablet section
can somebody help me restore new tablet bought at xmas..bbc iplayer wasnt working and was told by vendor to upgrade the fimware which they gave me a link to and then burn it to tf micro card using pheonix software..insert card into tablet and i would get red triangle followed by clicking noise for 4 mins then reboot ..upgrade done...i did this but got no red triangle but did get clicking for 4 mins on reboot tablet is blank and not even able to get into recovery mode to factory reset.....i have an identical tablet that is working ok and the specs are....
9 inch tabexpress tablet
model number....gt90x
android verssion 4.2 2
firmware version....v2.0 patch 1
kernal version...3.4.39+
build number...k70-eng 4.22 jdq39 201 40114 test-keys
any help appreciated
taff

[SOLVED] [Q] Fujitsu M532 Recovery Menu broken

Hi @ all,
i need help to rebuild my recovery Menu.
Today I received my new Fujitsu M532.
Model: M532
Android Version: 4.1.1
Baseband-Version: 11.102.15.02.00
Kernel-Version 3.1.10
Build-Number: 1.P14400.0505JPN-enFR.130423.0
Product-Number: 14405
What i have done? I've tried to root the Tab.
Tried to root with the following guides.
https://www.youtube.com/watch?v=J9Nfd34XK2A
http://forum.xda-developers.com/showthread.php?t=1801883&page=6
http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/showthread.php?p=31981511
-> completely unsuccessful
Next i tried to install it with the following:
http://forum.xda-developers.com/showpost.php?p=38214623&postcount=238
Since then my Recovery menu is broken
When I try to use Power > Power + Vol Up (2seconds) my Tab hags complete.
Who can help me re recover my recovery menu?
Does someone have a stock recovery.img for me?
Thx 4 Help
Hi @ all,
or can someone help me to flash the CWM / CWM Touch or something simmilar to M532?
Greez Cookie
[SOLVED]
Hi,
First of all I found a working stock recovery.img (attached)
Accidentally I've found a tool in this post http://forum.xda-developers.com/showpost.php?p=38357427&postcount=241 to install the CWM.
Now everything iss Ok.
Greez Cookie

[Q] Reload an android ROM

Hello. I have an unrooted Fujitsu Stylistic M532 US version. It came stock with 4.0 but I was able to upgrade it to 4.1.1 by hacking a Fujitsu UK ROM to make it suitable for a US device. I turned the device on the other day and was stuck at the Fujitsu splash screen ( it was working fine til then). I went into android recovery and cleared the cache. It was still stuck. I went into recovery and factory reset it. It then became stuck on the android splash screen. I've probably done this 10 times now with no luck. So I tried to load the ROM (.pkg) I used to flash it to 4.1.1 via "load update from external sources". It finds it but immediately aborts, I guess because it is the same version number. My question is can I load this ROM any other way, e.g. by rooting? Fujitsu support will not give me the stock ROM and wants $160 + shipping to fix it. Thanks in advance for any help.

irulu X7 eXpro CWM.zip repair help

hi guys i have a 7" irulu expro tablet andriod os 4.4.2 tablet 2 camera quad-core processers.I flashed CWM.zip onto my recovery
Heres the link https://www.google.com/url?sa=t&rct...u3AE7m4COzQEkr2TQ&sig2=tbkZSKlSCMegzv6hlzliZg
And then went into settings backup and reset and clicked on boot into recovery.now my device is stuck on the andriod logo and just stays there i tried connecting it to my pc but nothing happens its not even coming up on device manager.
is there anyway to fix this?Is my device bricked? the OS is fine its just that i flashed a zip over my recovery please can anyone help
me? Thank You
The link below is a quick guide anyone with an iRulu tablet that is stuck. Please pay it toward. It took me a month to figure out this shizzel.
https://drive.google.com/folderview?id=0B4fv54ZqdbASRWpYR21pRG9CUFE&usp=sharing
Chiseled brail into stone translated via N5

Categories

Resources