Hi @ all,
i need help to rebuild my recovery Menu.
Today I received my new Fujitsu M532.
Model: M532
Android Version: 4.1.1
Baseband-Version: 11.102.15.02.00
Kernel-Version 3.1.10
Build-Number: 1.P14400.0505JPN-enFR.130423.0
Product-Number: 14405
What i have done? I've tried to root the Tab.
Tried to root with the following guides.
https://www.youtube.com/watch?v=J9Nfd34XK2A
http://forum.xda-developers.com/showthread.php?t=1801883&page=6
http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/showthread.php?p=31981511
-> completely unsuccessful
Next i tried to install it with the following:
http://forum.xda-developers.com/showpost.php?p=38214623&postcount=238
Since then my Recovery menu is broken
When I try to use Power > Power + Vol Up (2seconds) my Tab hags complete.
Who can help me re recover my recovery menu?
Does someone have a stock recovery.img for me?
Thx 4 Help
Hi @ all,
or can someone help me to flash the CWM / CWM Touch or something simmilar to M532?
Greez Cookie
[SOLVED]
Hi,
First of all I found a working stock recovery.img (attached)
Accidentally I've found a tool in this post http://forum.xda-developers.com/showpost.php?p=38357427&postcount=241 to install the CWM.
Now everything iss Ok.
Greez Cookie
Related
Hi there !!
Hello everybody and thanks in advance for your help.
I was trying to clean my phone (sim unlocked via imei) of the vendor stuff (yoigo spain), and put a clean rom instead.
First I rooted my device with framaroot method and everyhing was ok. Then, after clean the rom of some unwanted apps (alcatel radio, alcatel power save, etc..) I tried to change the bootanimation, but deleted part of the /system part (build.prop) and on the next reboot the phone was bricked
I read all the thread about developing (Alcatel One Touch 4030x S'POP Development), and everybody say the method to recover is under OTU (one touch upgrade), but when I try it the answer is I have already the latest version and won't upgrade.
I tried all I imagined: wipeing partitions, deleting /system, installing CWM and TWRP, but no sucess..
I tried then to readback my phone, following the post of Cyberangel22k & johnnyspritz on post #204, but still bricked ..
Now when I boot I have 2 animations from manufacturer: alcatel glory2 + alcatel s'pop, the vendor logo (yoigo spain) and after that darkness ..
Please, help me to unbrick. Any help will be apreciated
thanks in advance and greetings from Barcelona (spain)
Take it to Yoigo. I had the same problem, I took it to a Yoigo store, told them I hadn't been even able to test my new phone since it won't start, they sent it to repair service, two weeks later my phone was given back to me good as new.
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Please help me friends.
Yesterday I got a update on Lenovo s850 and when I updated it. Th phone got stuck in recovery mode. It is not starting and no hard reset menu are showing. Is there any way to install new stock rom and can anyone tell me the whole procedure of this. Please help me I am in problem.
Hello XDA, I'm having issues with this tablet and was wondering if anyone can give me a hand.
The tablet was working fine, i tried to root it, it seemed to have worked but now every time the tablet is restarted it wipes everything, every time you have to do the initial setup which is really annoying, i tried doing a hard reset by going into recovery with no luck
When doing the reset it gives a bunch of errors mostly that the cache is not available which i assume is were the data for the reset was stored.
Here is my tablet info:
Serial:
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #32
Build Number: KVT49L.20150713
Has anyone successfully installed a custom recovery for this tablet? If so were can i get a copy to flash it and see if this solves this issue. I got in touch with the irulu people and they gave me a link for the firmware but is not working, https://www.irulu.com/download/lists?sn_number=X1781KX1507201E1224
I have just yesterday the same problem, exactly with the same tablet. I do the rooting with NewKingrootV4.80. Now I'm trying to connect the tablet to the FlashTool downloaded from iRULU site. But the program don't see the tablet (Phoenix suite); tablet in debugging mode. I'm tryng to update the program, automatically, from 1.0.4 version to 1.10, but after 3-4 minuts all become stopped....now I search the program, last version, directly on iRULU site.... Have you some news with your tablet???
this firmware worked on my irulu x7 expro x1 to get it unrooted
hxxps://cloud.mail.ru/public/MDsx/chr73KBTp
replace xx with tt
use phoenix suit, and all is good, no more back to square one after power off
Hi there,
I received the same tab today (the kids version but the specs are the same)
I managed to get it rooted by using kingo root.
hxxp://www.kingoapp.com/android-root/download.htm
Then I replaced kingo root with supersu using this link:
hxxp://androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
I hope this will help for you to.
(replace 'xx' in links with 'tt')
Same issue with my tablet with following specs
Brand: Irulu
Model Number: X7
Processor type: QuadCore-A33
Android: 4.4.2
Firmware: 2.0
Kernel Version:
3.4.39
[email protected] #33
Build Number: KVT49L.20150806
Any updates?
My Irulu expro X1 does not even come up to where anything can be entered. Only goes through the reboot with the Irulu screen then expro X11 then blank.
I want program FLASHING
Are people still working on this tablet? I was able to get twrp working (once) but now I fear I bricked my device. I got a twrp image for the rom and flashed it, clicked boot to recovery (from within os) and all seemed well. It loaded twrp and I immediately did a twrp backup and clicked reboot -> system (from twrp) it gave me a boot loop. Nbd I thought I'll go back into recovery and clear cache. Tried all the usual (pwr + up) (pwr + dwn) (pwr + both) combos and it will not go past Irulu screen. Help!
NM Folks I got 'er back online. Had to flash a new firmware.
hello. I just purchased a projector (Mod X3 (W200); Build-KOT 49H.20151102 test keys. It was suppose to be android 6.0 but is 4.4.1. Is there a way to get software to upgrade to at least 5.1.1 several pgms do not work under he 4.4.1 version. Please let me know at [email protected] Thanks in advance.
I flashes that firmware and it result with a problem, I have an inverted touch in the narrow side, how can I fix that?
---------- Post added at 07:13 PM ---------- Previous post was at 06:57 PM ----------
This one... hxxps://cloud.mail.ru/public/MDsx/chr73KBTp
Hi Everyone,
I spent *many* hours of searching on XDA forum, but still have no good leads. So, I have created this new thread and desperately hope somebody will help to find the missing piece of information...
I have the SPRINT version of Alcatel Onetouch Pixi 7 Tablet (model: 9007T).
While experiementing and trying to unlock the bootloader, I messed up with the Stock Recovery (loaded a custom recovery that was designed for a different model). Now I can not get in to the Stock Recovery - the screen just keep blinking when I try I am holding the Volume Down key, pressing and holding the Power key.
It used to bring me to the Stock Recovery screen where I could reset everything to the default factory configuration. Now I lost this option.
I tried to use Alcatel Mobile Upgrade Q (and S) softwares, but it doesn't "see" my tablet... like there is nothing connected to the port. I have verified and the drivers are installed.
ASKING for help: Can somebody who has Alcatel OT 9007T with the working Stock Recovery to backup and to share the Recovery.IMG please?
Appreciate your help and time in advance!
l0h
l0h said:
Hi Everyone,
I spent *many* hours of searching on XDA forum, but still have no good leads. So, I have created this new thread and desperately hope somebody will help to find the missing piece of information...
I have the SPRINT version of Alcatel Onetouch Pixi 7 Tablet (model: 9007T).
While experiementing and trying to unlock the bootloader, I messed up with the Stock Recovery (loaded a custom recovery that was designed for a different model). Now I can not get in to the Stock Recovery - the screen just keep blinking when I try I am holding the Volume Down key, pressing and holding the Power key.
It used to bring me to the Stock Recovery screen where I could reset everything to the default factory configuration. Now I lost this option.
I tried to use Alcatel Mobile Upgrade Q (and S) softwares, but it doesn't "see" my tablet... like there is nothing connected to the port. I have verified and the drivers are installed.
ASKING for help: Can somebody who has Alcatel OT 9007T with the working Stock Recovery to backup and to share the Recovery.IMG please?
Appreciate your help and time in advance!
l0h
Click to expand...
Click to collapse
I too am having this same issue
Me too i cannot find any stock rom for this need some expert help here