stuck on the boot animation screen!!! - Sony Xperia Z Ultra

After the updating to 14.2.A.1.136 whenever I reboot/boot the phone it will stuck on the boot animation screen (the color wave still moving ) I have to force shut it down many time until it boot normal. XZU is rooted. Any idea what can be the problem and how to fix it.
Because I did factory reset it but did not help. Any one has the same problem

funfun99999 said:
After the updating to 14.2.A.1.136 whenever I reboot/boot the phone it will stuck on the boot animation screen (the color wave still moving ) I have to force shut it down many time until it boot normal. XZU is rooted. Any idea what can be the problem and how to fix it.
Because I did factory reset it but did not help. Any one has the same problem
Click to expand...
Click to collapse
In the two or three days after release of 136 I flashed it maybe 8 or 10 times and never had that issue did both clean, dirty and part flashes...
What update method did you use?
I would be tempted to do a full backup of your data and then do a clean install from a FTF or do a PCC fix phone (whatever it is called)

blueether said:
In the two or three days after release of 136 I flashed it maybe 8 or 10 times and never had that issue did both clean, dirty and part flashes...
What update method did you use?
I would be tempted to do a full backup of your data and then do a clean install from a FTF or do a PCC fix phone (whatever it is called)
Click to expand...
Click to collapse
i did used this
http://forum.xda-developers.com/showthread.php?t=2631768
using TWRP and Wiped Dalvik-Cache, System, Cache, Data

funfun99999 said:
i did used this
http://forum.xda-developers.com/showthread.php?t=2631768
using TWRP and Wiped Dalvik-Cache, System, Cache, Data
Click to expand...
Click to collapse
Locked BL or unlocked BL
What firmware were you running before the update?, and was it rooted etc?

blueether said:
Locked BL or unlocked BL
What firmware were you running before the update?, and was it rooted etc?
Click to expand...
Click to collapse
Locked BL + XZDualRecovery2.7.83 BETA
It was on 14.1.B.1.532 flashed ftf to get root and installed XZDualRecovery tried to update to 14.2.A.0.290 using http://forum.xda-developers.com/showthread.php?t=2612980
But the phone did not boot it keep hanging on the boot animation
So I update to 14.2.A.1.136 and it work but after few reboot this problem started.

funfun99999 said:
Locked BL + XZDualRecovery2.7.83 BETA
It was on 14.1.B.1.532 flashed ftf to get root and installed XZDualRecovery tried to update to 14.2.A.0.290 using http://forum.xda-developers.com/showthread.php?t=2612980
But the phone did not boot it keep hanging on the boot animation
So I update to 14.2.A.1.136 and it work but after few reboot this problem started.
Click to expand...
Click to collapse
OK so it was working fine before?
Have you installed xposed, or any modules lately? - I've had that hang a boot
You could always do a reinstall of the rom and then flash the stripped FTF again ie follow the instructions like doing a new install
@[NUT] any other ideas as it's your rom?

blueether said:
OK so it was working fine before?
Have you installed xposed, or any modules lately? - I've had that hang a boot
You could always do a reinstall of the rom and then flash the stripped FTF again ie follow the instructions like doing a new install
@[NUT] any other ideas as it's your rom?
Click to expand...
Click to collapse
yes it works fine
yes i installed xposed
ok i will do it now
you hang was because of xposed?

funfun99999 said:
you hang was because of xposed?
Click to expand...
Click to collapse
I had 1 hang straight after installing xposed and about 5 modules, a reset an it booted up fine - Yes I know I should have activated them 1 at a time

blueether said:
I had 1 hang straight after installing xposed and about 5 modules, a reset an it booted up fine - Yes I know I should have activated them 1 at a time
Click to expand...
Click to collapse
Is the xposed itself or did you find which modules it cause this problem
I just flash the rom again and restored all the apps/date but not the xposed and reboot it 4 time now and no hangs

funfun99999 said:
Is the xposed itself or did you find which modules it cause this problem
I just flash the rom again and restored all the apps/date but not the xposed and reboot it 4 time now and no hangs
Click to expand...
Click to collapse
No I don't know what module it was or even if it was xposed. I only hung the once so I didn't go digging to find out.

blueether said:
No I don't know what module it was or even if it was xposed. I only hung the once so I didn't go digging to find out.
Click to expand...
Click to collapse
Ok thank you very much.

Just remember that Xposed adds a recovery file on your internal storage in case things like these happen. So if Xposed causes any issues, like a bootloop, just boot into recovery and flash the "disable_xposed.zip" (or something with that name) and reboot. Voila.

Related

[Q] (Q) mid way boot

hey guys please please help i had the custom rom pac nightly now here is where the sh*t went down, i tried to put on carbon and flashed the kernel with that and since then im unable to get back root i have locked the bootloader and tried unlocked the bootloader, the screen comes up to the point where the rom loads and the lil vibrate happens, and then pufff it just goes back to the boot up and then again and again !!! how can i fix this please help
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
LordManhattan said:
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
Click to expand...
Click to collapse
thanks buddy for the response but tried it and wont work !!!
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
blueether said:
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
Click to expand...
Click to collapse
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
ashankanand said:
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
Click to expand...
Click to collapse
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
blueether said:
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
Click to expand...
Click to collapse
ok bud tired it now the problem is the dam phone keeps going into recovery boots and gets stuck on sony and then reboots and goes into recovery any advice!!!
Flash a stock tft with flashtool in flashmode and it should work again.
Anyways flashing the kernel with the boot.img in fastboot mode should work.
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Do it like this:
- flash boot.img (flashtool: fastboot mode)
- wipe cache/dalvik cache (CWM Recovery)
- flash the ROM[.zip] (CWM Recovery)
- flash the GAPPS[.zip] (CWM Recovery)
- reboot
That should work.
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
ashankanand said:
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
You forgot to flash the rom itself. Just flashing the kernel (boot.img) doesn't to anything instead of flashing
the kernel. You need to flash the ROM to have working Operation System. That's why just the logo shows
up and goes into recovery. Put the ROM (the .zip file of the rom) on your SD Card and go into recovery
and go to "install .zip" and choose your file. After that the ROM should be loading after Boot Logo. Don't forget
to flash the GAPPS after flashing rom.
Pacman Rom: www.blownco.com/index.php/doc_download/13688-pac-togari-4-3-build-1-20131214-044914
Pacman Gapps: www.blownco.com/index.php/doc_download/13604-gapps-jb-20130813-signed
here is an example for installing the rom and gapps:
https://www.youtube.com/watch?v=n0In32vjxIg&feature=player_embedded
Just do the same with your files.
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
I was wondering man. Can you provide us with a link of the rom you want to use.
tr0teK said:
I was wondering man. Can you provide us with a link of the rom you want to use.
Click to expand...
Click to collapse
carbon rom : http://forum.xda-developers.com/devdb/project/dl/?id=5119
Pac-rom : http://pacman.basketbuild.com/download.php?file=main/togari/nightly/pac_togari-nightly-20140505.zip
How to reproduce your error step by step ?
tr0teK said:
How to reproduce your error step by step ?
Click to expand...
Click to collapse
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
ashankanand said:
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
Click to expand...
Click to collapse
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
tr0teK said:
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
Click to expand...
Click to collapse
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
ashankanand said:
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
Click to expand...
Click to collapse
Which ROM do you have installed exactly ? In which country do you live ?

[Q] Z2 not booting up after flashing pre-rooted lollipop file

I tried updating my xperia z2 to lollipop but it keeps restarting, doesn't go past Sony logo. I have tried 2 different lollipop versions 23.1.A.0.690 and 23.1.A.0.726 both were pre-rooted with recovery files. I can flash ftf files with the flash tool without any issues and successfully boot into lollipop. What am I doing wrong? I am coming from 4.4.4 rooted with dualrecovery installed.
blackburry said:
I tried updating my xperia z2 to lollipop but it keeps restarting, doesn't go past Sony logo. I have tried 2 different lollipop versions 23.1.A.0.690 and 23.1.A.0.726 both were pre-rooted with recovery files. I can flash ftf files with the flash tool without any issues and successfully boot into lollipop. What am I doing wrong? I am coming from 4.4.4 rooted with dualrecovery installed.
Click to expand...
Click to collapse
Be sure to flash kernel that fits lollipop and clear cache and data ☺
HellRoot said:
Be sure to flash kernel that fits lollipop and clear cache and data
Click to expand...
Click to collapse
I have a locked bootloader, would i still need to flash a new kernel? And I tried wiped cache and data, still the same problem.
blackburry said:
I have a locked bootloader, would i still need to flash a new kernel? And I tried wiped cache and data, still the same problem.
Click to expand...
Click to collapse
Have you tried to flash stock kernel only. With flashtool?
myrums said:
Have you tried to flash stock kernel only. With flashtool?
Click to expand...
Click to collapse
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
blackburry said:
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
Click to expand...
Click to collapse
I meant that you should flash stock kernel with flashtool also... As your phone is still running the 4.4.4 kernel... The fota... I can't remember about that one.. Try looking it up on Google.. I did not include it when I flashed a lot... But better be safe than sorry.
blackburry said:
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
Click to expand...
Click to collapse
You can flash kernel first, then try to reboot. If it doesent reboot after flashing the kernel, you can try to flash the fota also.
Don't think its any danger flashing the fota. If memory serves me right, the fota is somhow connected with ota updates.
Remember to uncheck everyting under the wipe: section and check everything but the kernel(and fota if you want) under exclude section
myrums said:
You can flash kernel first, then try to reboot. If it doesent reboot after flashing the kernel, you can try to flash the fota also.
Don't think its any danger flashing the fota. If memory serves me right, the fota is somhow connected with ota updates.
Remember to uncheck everyting under the wipe: section and check everything but the kernel(and fota if you want) under exclude section
Click to expand...
Click to collapse
I tried what you said, flashed the kernel first, didnt work. Flashed it again with kernel and fota, still didnt work. Any other suggestions? Once again i flash the latest firmware through flashtool and boot up no problem.
blackburry said:
I tried what you said, flashed the kernel first, didnt work. Flashed it again with kernel and fota, still didnt work. Any other suggestions? Once again i flash the latest firmware through flashtool and boot up no problem.
Click to expand...
Click to collapse
Have you tried this

Set warranty bit kernel stops me from rooting

Every time I try to root my tmobile-galaxy s5, which in now on 5.1.1 and on the newest update fol1, I install the newest version of twrp for this device but every time I install twrp the error message "set warranty bit kernel" pops up. Any idea to get passed this so I can root my phone?
This guy needs help said:
Every time I try to root my tmobile-galaxy s5, which in now on 5.1.1 and on the newest update fol1, I install the newest version of twrp for this device but every time I install twrp the error message "set warranty bit kernel" pops up. Any idea to get passed this so I can root my phone?
Click to expand...
Click to collapse
The set warranty bit isn't a problem, it's just the phone's way of showing you have a custom recovery installed. I get the same notification every time I boot up but I was able to root successfully. I assume you're using the correct version of TWRP and the superSU zip?
thisisapoorusernamechoice said:
The set warranty bit isn't a problem, it's just the phone's way of showing you have a custom recovery installed. I get the same notification every time I boot up but I was able to root successfully. I assume you're using the correct version of TWRP and the superSU zip?
Click to expand...
Click to collapse
I flashed twrp on Odin and went into twrp but when I flash supersu in twrp I hit boot in to system but it says set warranty bit kernel in the top left corner for a while. Please help me I need root acess
This guy needs help said:
I flashed twrp on Odin and went into twrp but when I flash supersu in twrp I hit boot in to system but it says set warranty bit kernel in the top left corner for a while. Please help me I need root acess
Click to expand...
Click to collapse
Which superSU version and which TWRP version? Also did you check the md5 on both? It sounds like you might have a bad download; this method has worked to root countless other people's devices with no issue
thisisapoorusernamechoice said:
Which superSU version and which TWRP version? Also did you check the md5 on both? It sounds like you might have a bad download; this method has worked to root countless other people's devices with no issue
Click to expand...
Click to collapse
I downloaded twrp and supersu on a thread you were on and you said they were good. I have a question though, how long did the first boot up take for you rooted phone?
This guy needs help said:
I downloaded twrp and supersu on a thread you were on and you said they were good. I have a question though, how long did the first boot up take for you rooted phone?
Click to expand...
Click to collapse
Same as normal boot up if I remember correctly. I also hadn't set anything up yet, even skipped the initial setup wizard that runs when you first start the phone, because I knew I planned to install cyanogenmod as soon as I was rooted. I only booted into system after I rooted once to run a couple of apps that require root in order to verify that I was, in fact, rooted. After that I wiped everything in order to install CM
thisisapoorusernamechoice said:
Same as normal boot up if I remember correctly. I also hadn't set anything up yet, even skipped the initial setup wizard that runs when you first start the phone, because I knew I planned to install cyanogenmod as soon as I was rooted. I only booted into system after I rooted once to run a couple of apps that require root in order to verify that I was, in fact, rooted. After that I wiped everything in order to install CM
Click to expand...
Click to collapse
When I installed twrp and the used it than flashed supersu, I hit boot into system and then it didn't boot into system, it just said "set warranty bit kernel". Please help.
This guy needs help said:
When I installed twrp and the used it than flashed supersu, I hit boot into system and then it didn't boot into system, it just said "set warranty bit kernel". Please help.
Click to expand...
Click to collapse
I need logs or something, because as I've said, "set warranty bit kernel," isn't a problem, that's normal and expected. I can't know what's wrong with your device with no information.
Did you try starting from the beginning? Flashing the stock OL1 Odin file, booting that up (not setting anything up except a Wi-Fi connection), and trying rooting with that? Did you try opening the TWRP tar file with 7zip or WinRAR and extracting the img file to verify the download wasn't corrupted? Did you try doing a similar check with the superSU zip? What version of supersu are you trying to use? Have you tried clearing cache and dalvik after installing supersu (not necessary but sometimes helps clear up issues)?
thisisapoorusernamechoice said:
I need logs or something, because as I've said, "set warranty bit kernel," isn't a problem, that's normal and expected. I can't know what's wrong with your device with no information.
Did you try starting from the beginning? Flashing the stock OL1 Odin file, booting that up (not setting anything up except a Wi-Fi connection), and trying rooting with that? Did you try opening the TWRP tar file with 7zip or WinRAR and extracting the img file to verify the download wasn't corrupted? Did you try doing a similar check with the superSU zip? What version of supersu are you trying to use? Have you tried clearing cache and dalvik after installing supersu (not necessary but sometimes helps clear up issues)?
Click to expand...
Click to collapse
All I did was flash the latest file of twrp. Then when it said pass I went straight into download mode and then flashed supersu (the latest version for my phone. After that I rebooted but it only says "set warranty bit kernel" in the top left corner in yellow. I tried this twice but same result (on the second time I flashed fol1 again before I tried).
This guy needs help said:
All I did was flash the latest file of twrp. Then when it said pass I went straight into download mode and then flashed supersu (the latest version for my phone. After that I rebooted but it only says "set warranty bit kernel" in the top left corner in yellow. I tried this twice but same result (on the second time I flashed fol1 again before I tried).
Click to expand...
Click to collapse
you don't flash SU in download mode... you reboot into recovery to flash it.
mgp53 said:
you don't flash SU in download mode... you reboot into recovery to flash it.
Click to expand...
Click to collapse
Sorry I mean I went in to recovery mode and flashed it
When you rooted did it say "set warranty bit kernel " when you booted back to Android after flashing supersu with twrp?
thisisapoorusernamechoice said:
I need logs or something, because as I've said, "set warranty bit kernel," isn't a problem, that's normal and expected. I can't know what's wrong with your device with no information.
Did you try starting from the beginning? Flashing the stock OL1 Odin file, booting that up (not setting anything up except a Wi-Fi connection), and trying rooting with that? Did you try opening the TWRP tar file with 7zip or WinRAR and extracting the img file to verify the download wasn't corrupted? Did you try doing a similar check with the superSU zip? What version of supersu are you trying to use? Have you tried clearing cache and dalvik after installing supersu (not necessary but sometimes helps clear up issues)?
Click to expand...
Click to collapse
Do I have to factory reset to root with this method?
This guy needs help said:
Do I have to factory reset to root with this method?
Click to expand...
Click to collapse
No
I found it out
For some reason I had to clear the cache and dalvik cache after the flash. That did it now I'm rooted!
This guy needs help said:
For some reason I had to clear the cache and dalvik cache after the flash. That did it now I'm rooted!
Click to expand...
Click to collapse
Hi!! Okay, I am having the same problem you had and need to know exactly what you did to fix it.
I followed the instructions exactly. I am stuck on the "set warranty bit kernel screen. I want to know what you did to fix this.
(When you were flashing the supersu for the second time, before you had to clear cache and dalvik, did you just go into recovery mode and flash it again, or did you have to delete something before you did that)
Please get back to me anyone, advice needed!
I cleared the caches before i rebooted into the system ( well i think this is what i did , it was a week ago) good luck bud?
ktberr said:
Hi!! Okay, I am having the same problem you had and need to know exactly what you did to fix it.
I followed the instructions exactly. I am stuck on the "set warranty bit kernel screen. I want to know what you did to fix this.
(When you were flashing the supersu for the second time, before you had to clear cache and dalvik, did you just go into recovery mode and flash it again, or did you have to delete something before you did that)
Please get back to me anyone, advice needed!
Click to expand...
Click to collapse
Oh yeah i forgot. You need to say no if twrp says to you " your phone appears to not be rooted , do you want root " because this just bricks your phone. P.s. my phone is rooted and is still says it but it is not true because it just bricks your phone

MM reboot loop .570

Hi,
I have the reboot loop after flashing any of the .570 rom. I have tried the flashable zip from one thread and have also tried a couple of FTFs with APP Log and UserData wipe selected.
Does anyone know why this isn't working on my phone? I have a regular 4G Z2 with a locked BL.
Thanks,
linkazoid said:
Hi,
I have the reboot loop after flashing any of the .570 rom. I have tried the flashable zip from one thread and have also tried a couple of FTFs with APP Log and UserData wipe selected.
Does anyone know why this isn't working on my phone? I have a regular 4G Z2 with a locked BL.
Thanks,
Click to expand...
Click to collapse
Yes I also face this bootloop with "Marshmallow_Stock_570_ROM_Ultraslim (Full deodxed)" so try to install bootloop fix from other thread OP topic 5.5 http://forum.xda-developers.com/xperia-z2/development/rom-official-6-0-1-23-5-0-486-beta-t3336770 it work
Doesn't this put the old kernel back though?
linkazoid said:
Doesn't this put the old kernel back though?
Click to expand...
Click to collapse
I don't know BUT today he make the new one with the latest version 570 with this fix bootloop I can try and enjoy MM rom .
I saw this, I have now flashed the ultraslim rom and the .570 fix instead.
What is the bootloop like? I have bootloop after flash the 570 made from a tft. It shows the SONY logo and then black screen for seconds then auto reboot. I'll try that bootloop fix zip tomorrow. Hope that will work.
My bootloop consisted of the ROM booting but as soon as you touched the screen to check a box or unlock the screen it would restart. The fix by niaboc works as I've applied it on the ultraslim ROM, now using the latest kernel and latest ROM!
To fix the bootloop, have to flash via recovery.
Then how I enter the recovery while this handheld keep restart at welcome screen.thanks for ur respons
Touch the screen and hold volume down! If you've installed a ROM without recovery then you'll have to reflash a ftf and start again

i need help with recovery

hi
i just rooted my phone today z2 d6502 6.0.1 build 23.5.A.1.291
http://forum.xda-developers.com/showpost.php?p=69733535&postcount=254
i followed the steps and if it didn't work i keep doing it till it work so maybe i did something wrong idk my phone reboot into recovery then i flashed su and 291 kernel
now i can't boot into recovery again to flash custom rom
i installed quick reboot app and still didn't work
hope someone tell me what to do because am new with root
thank you
kimoweantemo said:
hi
i just rooted my phone today z2 d6502 6.0.1 build 23.5.A.1.291
http://forum.xda-developers.com/showpost.php?p=69733535&postcount=254
i followed the steps and if it didn't work i keep doing it till it work so maybe i did something wrong idk my phone reboot into recovery then i flashed su and 291 kernel
now i can't boot into recovery again to flash custom rom
i installed quick reboot app and still didn't work
hope someone tell me what to do because am new with root
thank you
Click to expand...
Click to collapse
Are you use twrp recovery? fix it with recovery fix.zip
tutorial at xda
use browser to open http://forum.xda-developers.com/xperia-z2/general/mm-6-0-1-twrp-recovery-t3364871
punkvsbabun said:
Are you use twrp recovery? fix it with recovery fix.zip
tutorial at xda
use browser to open http://forum.xda-developers.com/xperia-z2/general/mm-6-0-1-twrp-recovery-t3364871
Click to expand...
Click to collapse
first thank you
yeah am using twrp i tried to follow the steps in ur link i cant do any of em
i installed 3 file manger apps and still can't delete twrp folder or rename chargemon file and can't find link for recovery fix in this post
i there any easy way to re install any recovery other than twrp or i should fix it first
thanks again
why dont you repeat the whole process again for once? maybe that'll help you
Dr. Death said:
why dont you repeat the whole process again for once? maybe that'll help you
Click to expand...
Click to collapse
yeah thanks it worked still the first time recovery install reboot into system again not the recovery the second time worked i can log in recovery mode i turn it off then i keep press vol down
thank you
can i ask you something its better to flash a rom like eXistenZ or i just keep my phone just rooted
kimoweantemo said:
yeah thanks it worked still the first time recovery install reboot into system again not the recovery the second time worked i can log in recovery mode i turn it off then i keep press vol down
thank you
can i ask you something its better to flash a rom like eXistenZ or i just keep my phone just rooted
Click to expand...
Click to collapse
I'm myself on existenz. And ll say it's the best rom for z2. Battery life is better than stock. Speed better than stock. More features than stock.
Also install xposed to add more functionality to your phone
Dr. Death said:
I'm myself on existenz. And ll say it's the best rom for z2. Battery life is better than stock. Speed better than stock. More features than stock.
Also install xposed to add more functionality to your phone
Click to expand...
Click to collapse
k thanks can you please tell me which files i should download and can u make
instructions simple like u did with root and recovery step by step
i saw alot of links and there is LOCKED & UNLOCKED Bootloaders part and the
patch for d6502 i don't wanna do something wrong like the recovery
sorry i asked you too much
kimoweantemo said:
k thanks can you please tell me which files i should download and can u make
instructions simple like u did with root and recovery step by step
i saw alot of links and there is LOCKED & UNLOCKED Bootloaders part and the
patch for d6502 i don't wanna do something wrong like the recovery
sorry i asked you too much
Click to expand...
Click to collapse
Do you want it for existenz rom ?
Dr. Death said:
Do you want it for existenz rom ?
Click to expand...
Click to collapse
yes please
kimoweantemo said:
yes please
Click to expand...
Click to collapse
Okay ll do it tomorrow. But I'll have to wait around one day. I'm a bit busy. But ll do it for sure.
Dr. Death said:
Okay ll do it tomorrow. But I'll have to wait around one day. I'm a bit busy. But ll do it for sure.
Click to expand...
Click to collapse
k tyt
[Step-by-step] How to install eXistenz ROM on your Z2
Okay. So, this is for Xperia Z2 MM .291 only. If you have a rooted device then follow the steps but if you dont have root and recovery on your phone then first get rooted from here :- ROOT
Now, for installing eXistenZ Rom follow these steps :-
1. Download eXistenZ v5.0.1 from here and the latest update (which is v5.6.5 for now. Check for updates here) From here -> Latest Update <-
You dont need to have all the updates because all the features of previous updates will be included in the newer updates.
2.After downloading these two files download Bootloop fix(from here) and baseband patch for z2 (from here)
3. After Downloading these 4 files, place them in your SD card.
4. Now go to Recovery. select install and then select Existenz v 5.0.1 (the first file we downloaded). after that install again and the latest update i.e v5.6.5 (the second file we downloaded). And now reboot your device.
5. wait for 10 mins. There is a fair chance you'll get a bootloop i.e your phone will be stucked on xperia screen. THen force shut down your phone ( force shut down by pressing a little button which is on the left hand side of sim tray for 3 secs. ) and go to recovery AND flash bootloop fix (the third file we downloaded). and reboot your device.
6. the first boot may take time but this will work. but now you will notice that you wont have any signal. so for that do to recovery again and flash baseband patch (the fourth file we downloaded). and just reboot.
7. enjoy. you have working eXistenZ rom on your phone.
Please Ask If you have any query.
P.S.: NONE OF THEM IS MY WORK. I'M JUST SHARING THIS METHOS FOR THOSE PEOPLE FACING PROBLEMS INSTALLING THE EXISTENZ ROM.
FOR QUERIES AND PROBLEMS GO TO MAIN THREAD : HERE
Dr. Death said:
Okay. So, this is for Xperia Z2 MM .291 only. If you have a rooted device then follow the steps but if you dont have root and recovery on your phone then first get rooted from here :- ROOT
Now, for installing eXistenZ Rom follow these steps :-
1. Download eXistenZ v5.0.1 from here and the latest update (which is v5.6.5 for now. Check for updates here) From here -> Latest Update <-
You dont need to have all the updates because all the features of previous updates will be included in the newer updates.
2.After downloading these two files download Bootloop fix(from here) and baseband patch for z2 (from here)
3. After Downloading these 4 files, place them in your SD card.
4. Now go to Recovery. select install and then select Existenz v 5.0.1 (the first file we downloaded). after that install again and the latest update i.e v5.6.5 (the second file we downloaded). And now reboot your device.
5. wait for 10 mins. There is a fair chance you'll get a bootloop i.e your phone will be stucked on xperia screen. THen force shut down your phone ( force shut down by pressing a little button which is on the left hand side of sim tray for 3 secs. ) and go to recovery AND flash bootloop fix (the third file we downloaded). and reboot your device.
6. the first boot may take time but this will work. but now you will notice that you wont have any signal. so for that do to recovery again and flash baseband patch (the fourth file we downloaded). and just reboot.
7. enjoy. you have working eXistenZ rom on your phone.
Please Ask If you have any query.
P.S.: NONE OF THEM IS MY WORK. I'M JUST SHARING THIS METHOS FOR THOSE PEOPLE FACING PROBLEMS INSTALLING THE EXISTENZ ROM.
FOR QUERIES AND PROBLEMS GO TO MAIN THREAD : HERE
Click to expand...
Click to collapse
THANK YOU VERY MUCH
i did every thing like u said but i did factory reset before i flash the rom first and didn't flash bootloop fix i waited like 7 8 min then it started normally like enter my info wifi etc but when i turn it off so i can flash the patch it took a long time
like 10 min and i keep pressing power button till it close its just the first time so
do i need to flash the bootloop fix or no need for that
so thank you again
can u suggest some app i should install it after i rooted my phone and what its use
and i bought a new sd card 32 gb uhs-1 can u tell me how to move games and apps into sd card not internal storage
kimoweantemo said:
THANK YOU VERY MUCH
i did every thing like u said but i did factory reset before i flash the rom first and didn't flash bootloop fix i waited like 7 8 min then it started normally like enter my info wifi etc but when i turn it off so i can flash the patch it took a long time
like 10 min and i keep pressing power button till it close its just the first time so
do i need to flash the bootloop fix or no need for that
so thank you again
can u suggest some app i should install it after i rooted my phone and what its use
and i bought a new sd card 32 gb uhs-1 can u tell me how to move games and apps into sd card not internal storage
Click to expand...
Click to collapse
whenever you have bootloop on your device on this rom flash the bootloop fix
and whenever no signals flash the baseband patch.
and yes when you flash the baseband patch, it takes time to boot like 10-15mins.
so now you are rooted.
install xposed installer and then the android-n-ify to get nougat like notifications.
greenify for more battery.
and enjoy.
if you want an app for somthing specific ask me.
Dr. Death said:
whenever you have bootloop on your device on this rom flash the bootloop fix
and whenever no signals flash the baseband patch.
and yes when you flash the baseband patch, it takes time to boot like 10-15mins.
so now you are rooted.
install xposed installer and then the android-n-ify to get nougat like notifications.
greenify for more battery.
and enjoy.
if you want an app for somthing specific ask me.
Click to expand...
Click to collapse
ok thanks i installed them
now please what about install/move apps to sd card
i rooted so i can install big games like asphalt modern combat on sd card
i there a way to do that
kimoweantemo said:
ok thanks i installed them
now please what about install/move apps to sd card
i rooted so i can install big games like asphalt modern combat on sd card
i there a way to do that
Click to expand...
Click to collapse
xposed module named obb on sd will do your work.
Dr. Death said:
xposed module named obb on sd will do your work.
Click to expand...
Click to collapse
i installed it and activated mod in xpo then reboot then tried to move asphalt data file to sd card android / data it didn't work did i miss something
kimoweantemo said:
i installed it and activated mod in xpo then reboot then tried to move asphalt data file to sd card android / data it didn't work did i miss something
Click to expand...
Click to collapse
Go to xposed framework modules forum on xda and search for obb on sd. There are 2-3 xposed modules. Try them.
Dr. Death said:
Go to xposed framework modules forum on xda and search for obb on sd. There are 2-3 xposed modules. Try them.
Click to expand...
Click to collapse
i try Xinternalsd mod same thing didnt work and someone told me try install lower xposed ver like 83 it didnt work too
kimoweantemo said:
i try Xinternalsd mod same thing didnt work and someone told me try install lower xposed ver like 83 it didnt work too
Click to expand...
Click to collapse
Ohh that's a problem then. Post on xinternal sd or obb on sd thread about your issues. Maybe they will help.

Categories

Resources