I tried updating my xperia z2 to lollipop but it keeps restarting, doesn't go past Sony logo. I have tried 2 different lollipop versions 23.1.A.0.690 and 23.1.A.0.726 both were pre-rooted with recovery files. I can flash ftf files with the flash tool without any issues and successfully boot into lollipop. What am I doing wrong? I am coming from 4.4.4 rooted with dualrecovery installed.
blackburry said:
I tried updating my xperia z2 to lollipop but it keeps restarting, doesn't go past Sony logo. I have tried 2 different lollipop versions 23.1.A.0.690 and 23.1.A.0.726 both were pre-rooted with recovery files. I can flash ftf files with the flash tool without any issues and successfully boot into lollipop. What am I doing wrong? I am coming from 4.4.4 rooted with dualrecovery installed.
Click to expand...
Click to collapse
Be sure to flash kernel that fits lollipop and clear cache and data ☺
HellRoot said:
Be sure to flash kernel that fits lollipop and clear cache and data
Click to expand...
Click to collapse
I have a locked bootloader, would i still need to flash a new kernel? And I tried wiped cache and data, still the same problem.
blackburry said:
I have a locked bootloader, would i still need to flash a new kernel? And I tried wiped cache and data, still the same problem.
Click to expand...
Click to collapse
Have you tried to flash stock kernel only. With flashtool?
myrums said:
Have you tried to flash stock kernel only. With flashtool?
Click to expand...
Click to collapse
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
blackburry said:
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
Click to expand...
Click to collapse
I meant that you should flash stock kernel with flashtool also... As your phone is still running the 4.4.4 kernel... The fota... I can't remember about that one.. Try looking it up on Google.. I did not include it when I flashed a lot... But better be safe than sorry.
blackburry said:
No, Ill try that. Do i flash just the kernel or Fotakernel as well?
Click to expand...
Click to collapse
You can flash kernel first, then try to reboot. If it doesent reboot after flashing the kernel, you can try to flash the fota also.
Don't think its any danger flashing the fota. If memory serves me right, the fota is somhow connected with ota updates.
Remember to uncheck everyting under the wipe: section and check everything but the kernel(and fota if you want) under exclude section
myrums said:
You can flash kernel first, then try to reboot. If it doesent reboot after flashing the kernel, you can try to flash the fota also.
Don't think its any danger flashing the fota. If memory serves me right, the fota is somhow connected with ota updates.
Remember to uncheck everyting under the wipe: section and check everything but the kernel(and fota if you want) under exclude section
Click to expand...
Click to collapse
I tried what you said, flashed the kernel first, didnt work. Flashed it again with kernel and fota, still didnt work. Any other suggestions? Once again i flash the latest firmware through flashtool and boot up no problem.
blackburry said:
I tried what you said, flashed the kernel first, didnt work. Flashed it again with kernel and fota, still didnt work. Any other suggestions? Once again i flash the latest firmware through flashtool and boot up no problem.
Click to expand...
Click to collapse
Have you tried this
Related
I have a xperia mini st15i-1.locked bootloader. 2.Unrooted. For rooting purpose i flash with a .42 based ftf file using flash tool and then i root my phone and install cwm by market app. Then I put the file to the to sd card and install it using aroma installer after wiping -1.cache,factory reset 2.format data 3.format system 4.format cache 5.format dalvik cache. Installation completes and when the device is rebooted it stcks after showing the boot animation.Dont know whats wrong.Please help I am tired of trying all this thing repetitively but no luck for me.
Which ROM did you flash? Which kernel are you using? If it's an ICS based ROM, and you're on a .42 GB, obviously enough the phone won't boot properly.
Feanor88 said:
Which ROM did you flash? Which kernel are you using? If it's an ICS based ROM, and you're on a .42 GB, obviously enough the phone won't boot properly.
Click to expand...
Click to collapse
I am using stock kernel as i have locked bootloader.
1. http://forum.xda-developers.com/showthread.php?t=1578109
2. http://forum.xda-developers.com/showthread.php?t=1748576
3. http://forum.xda-developers.com/showthread.php?p=28026240#post28026240
What is meant by ics based rom??
It means that they are developed starting from official Sony ICS ROM. Therefore, they will only work if you are using ICS kernel.
Do this:
-Download from HERE Mini's ICS firmware.
-Use Flashtool to flash only the kernel: this means you have to select the ICS .ftf and then uncheck all "Wipe" boxes. Then check all "Exclude" voices, but leave "Exclude kernel" unchecked.
-After flashing the kernel, you should be able to boot.
Feanor88 said:
It means that they are developed starting from official Sony ICS ROM. Therefore, they will only work if you are using ICS kernel.
Do this:
-Download from HERE Mini's ICS firmware.
-Use Flashtool to flash only the kernel: this means you have to select the ICS .ftf and then uncheck all "Wipe" boxes. Then check all "Exclude" voices, but leave "Exclude kernel" unchecked.
-After flashing the kernel, you should be able to boot.
Click to expand...
Click to collapse
Thnxx....But if I want to install those roms then what should I do?Do I have to root the ICS?? I have this ftf and just flashed but I lost root access.
Well, you lost root access because you didn't do what I told you to do.
So why should I tell you what to do next? You probably wouldn't do it.
So... you flashed ICS. Congratulations. Now, to root ICS, you have to flash GB back. Then root it. Then, you can:
a) Flash ICS following THIS tutorial to keep root. Then install CWM. Then, use CWM to flash the ROM.
b) Install CWM on GB. Use CWM to flash the ROM. And then you can do what I told you to do earlier. That is: ONLY. FLASH. ICS. KERNEL. Not the whole ROM. Otherwise, you'll have to start from the beginning.
Good Quote. CongratulATION
Feanor88 said:
Well, you lost root access because you didn't do what I told you to do.
So why should I tell you what to do next? You probably wouldn't do it.
So... you flashed ICS. Congratulations. Now, to root ICS, you have to flash GB back. Then root it. Then, you can:
a) Flash ICS following THIS tutorial to keep root. Then install CWM. Then, use CWM to flash the ROM.
b) Install CWM on GB. Use CWM to flash the ROM. And then you can do what I told you to do earlier. That is: ONLY. FLASH. ICS. KERNEL. Not the whole ROM. Otherwise, you'll have to start from the beginning.
Click to expand...
Click to collapse
At last I m done...Thnx for all your help man....thanx a lot...
juabhi said:
At last I m done...Thnx for all your help man....thanx a lot...
Click to expand...
Click to collapse
You're welcome
eltonpestana said:
Good Quote. CongratulATION
Click to expand...
Click to collapse
What?
My friend followed the steps given in the following link to install CM-9 on his phone.
Cyanogenmod 9 on Xperia S
Once he did a data wipe, he rebooted the phone and left it for a couple of minutes. It remained stuck at the bootloader for around 15 minutes. He then proceeded to try to try the whole thing again. While the fastboot flashing was successful, while trying to install the cm9-nozomi zip file, he got the following error:
assert failed: getprop("ro.product.device")=="LT26i"||getprop("ro.build.product")=="LT26i"||(getprop("ro.product.device")=="LT26a"||getprop("ro.build.product")=="LT26a"||getprop("ro.product.device")=="nozomi"||getprop("ro.build.product")=="nozomi"
Status 7
He's also tried mounting the system partition via mounts and storages and it shows mount failed. The same is the result for data, cache, etc.
He's now stuck at boot, but is able to access fastboot and recovery mode. The problem is that clockworkmod doesn't support USB OTG Mount and that even if I can modify the update script to not check for the script, I have no way of sending it into the phone.
Any suggestions, solutions or the like would be highly appreciated
I posted a question in your other post. Have you unlocked your bootloader?
Sorry about that.
Yes.
That was the first thing I made was done.
karthik_hp_1992 said:
Sorry about that.
Yes.
That was the first thing I made was done.
Click to expand...
Click to collapse
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
rhogz said:
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
Click to expand...
Click to collapse
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
karthik_hp_1992 said:
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
Click to expand...
Click to collapse
Try flashinf ftf files restore it install boot loader then it will return to stock
try cm9 if still not working then use pure ics kernel 1.1;
It did work for me....Intall it directly after installing cm9Don not Reboot Device After Installing cm9....try it
karthik_hp_1992 said:
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
Click to expand...
Click to collapse
Ok so no need to flash back to stock, as you've mentioned you're on stock right now. You can flash via fastboot Advanced Stock Kernel by Arakmar or any Kernel that has CWM. Then you wipe Dalvik Cache and now you can install CM9. I stated on my earlier post that you can try flashing Krab's kernel for CM9 http://forum.xda-developers.com/show....php?t=1808831.
rhogz said:
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
Click to expand...
Click to collapse
I flashed recovery-nozomi.img , then flashed cm9. It worked. Thanks for all the help!
karthik_hp_1992 said:
I flashed recovery-nozomi.img , then flashed cm9. It worked. Thanks for all the help!
Click to expand...
Click to collapse
You can hit thanks if we have helped you :good:
rhogz said:
You can hit thanks if we have helped you :good:
Click to expand...
Click to collapse
I was willing to try out CM 9.1 ROM I unlocked the bootloader as per steps everything went well. When I reboot it shows FXP logo and then it is stuck at Xperia logo. Since its battery is not removable I have to wait until it all drains out and charge again and get it into working mode. I could go into recovery and flash CM 9.1 but even from there when I reboot it now stuck up at CM logo same as Stock Xperia logo.
I have emma, flashtool and SUS but I cannot get my phone into flashboot or flashmode as nothing happens with volume key combination. When I connect using USB cable it shows RED LED light and once charged up I can get it into recovery mode...
I gave phone to sony repair somehow they are able to get into flashmode... however they say they might not be able to repair it as using Emma it doesn't flash stock ROM.
I am quite sure sony is going to return me handset without repair, any help would really save my brand new Xperia S from going into vain, Thanks a lot in advance!!!
Edit: nvm I didn't see previous posts
Sent from my LT22i using xda premium
Hi everybody, I've just rooted, installed CWM and flash experience v2.1 and everything worked.
Than I flashed AC!D, wiped, then flashed Cybeshot 4, wiped, then flashed cybershot 5. After that I rebooted and from that moment it is in bootloop. I've already, wiped and reflashed the ROM, but it continues to reboot and a couple of times also the AROMA installer got stuck.
I really need help. What can I do to fix it? I mean, there's no reason why it shouldn't work after the flash, right?
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Flash official ics firmware using flashtool
rakz992 said:
Wipe everything (data system etc etc) then flash some ics kernel.. Then flash official ics .54ftf... This should work:thumbup:
Click to expand...
Click to collapse
I've got a .10.ftf and a .54.ftf kernels. I've created a zip for each other, then selected install zip form sd card in CWM, but it says installation aborted. Why? What's wrong now?
Mokiwipeout said:
Flash official ics firmware using flashtool
Click to expand...
Click to collapse
I cannot flash via flashtool because I can only work in CWM and flashtool doesn't recognize the phone in that modality.
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
rakz992 said:
You mean to say flashtool doesn't recognise you're mobile?? In that case.. You are missing some flashtool drivers.. You'll find them in /flashtool/drivers/ whichever folder you've installed flashtool in... After this flashtool should recognise you're device... If it doesn't then try flashing any ics kernel through cwm.. You'll find them in dev thread.. N then flash ics Rom
Click to expand...
Click to collapse
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
EDIT: ok, I've been able to use flashtool. I've flashed .10 kernel, then flashed .54 kernel, then reinstalled experience ROM, wiped and restarted. It continuos to bootloop. Now I try to flash a stock ICS ROM.
acvtre said:
Remember that I can access only the CWM screen, flashtool can recognize the mobile even in CWM mode?
However, I've already tried to flash the kernel via CWM, but it says installation aborted. I've zipped .10 and .54 kernel in two different zip and renamed them kernel.10.zip and kernel.54.zip.
What's wrong?
Click to expand...
Click to collapse
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Mokiwipeout said:
Omg in order to use flash tool, just shut down ur phone, and then press the power button and the volume down button. If the led becomes green then u can succesfully use flash tool... Man, do some research first!
And also, get the ftf file by extracting the zip....
Click to expand...
Click to collapse
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
acvtre said:
I've mandaged to flash the kernels .10 and .54 via flashtool. Then reinstalled experience ROM and continuos to bootloop.
Click to expand...
Click to collapse
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
dont install any rom!!! just flash the ftf file god dammit
rakz992 said:
Man!! Just flash official ie stock .54 ftf file through flashtool!! Just this nothing else!! No kernel no nothing! Just ftf!!
Click to expand...
Click to collapse
Ok, now I've wiped and flashed only MT27_6.1.1.B.1.54_KERNEL.ftf file through flashtool. Restarted the phone and it continuos to bootloop. When the phone says preparing internal storage it restart the phone.
sorry for my noobage. Now I've flashed MT27i_6.1.1.B.1.54_Global.ftf (big file) and flashtool had a problem. It says "err severity=major err code="0009"" err dynamic: block verification failed".
Now the phone continuosly shows screen with "sony".
Now what can I do? Can't even enter in CWM mode.
Ok, I've solved the problem. The last firmware I flashed was for unlocked xperia sola, this is why I had problems. Now I've resolved the softbrick thanks to a guide of doctor_droid.
Now I have to reroot and reinstall CWM, right?
Also thanks to you guys for your patience.
Yes... N after you install cwm.. Please make a back up through cwm for god sake!! happy rooting!! :thumbup:
Another question: the first time that the bootloop started was when I flashed cybershot and ac!d without restarting.
Do you think that the bootloop started because I haven't resarted between the two flashes?
Nothing as such.. May be conflicts between cybershot n acid files!! It's better you restart everytime you flash.. N do wipe cache partition n dalvik
Oh gosh, another funny problem. Got a problem with rooting.
I've flashed .10.tft kernel, then run "runme.bat" (from rootwithrestore) and this time says that there's "old adb" or something like that. However, I manage to conclude the process, but when I reboot I've got black screen. After that I've flashed the .54.tft file and the phone works fine, but there's no SuperSU app. So I suppose it's not rooted.
What's wrong with the runme.bat?
Yep not rooted!! Try again!!
After the updating to 14.2.A.1.136 whenever I reboot/boot the phone it will stuck on the boot animation screen (the color wave still moving ) I have to force shut it down many time until it boot normal. XZU is rooted. Any idea what can be the problem and how to fix it.
Because I did factory reset it but did not help. Any one has the same problem
funfun99999 said:
After the updating to 14.2.A.1.136 whenever I reboot/boot the phone it will stuck on the boot animation screen (the color wave still moving ) I have to force shut it down many time until it boot normal. XZU is rooted. Any idea what can be the problem and how to fix it.
Because I did factory reset it but did not help. Any one has the same problem
Click to expand...
Click to collapse
In the two or three days after release of 136 I flashed it maybe 8 or 10 times and never had that issue did both clean, dirty and part flashes...
What update method did you use?
I would be tempted to do a full backup of your data and then do a clean install from a FTF or do a PCC fix phone (whatever it is called)
blueether said:
In the two or three days after release of 136 I flashed it maybe 8 or 10 times and never had that issue did both clean, dirty and part flashes...
What update method did you use?
I would be tempted to do a full backup of your data and then do a clean install from a FTF or do a PCC fix phone (whatever it is called)
Click to expand...
Click to collapse
i did used this
http://forum.xda-developers.com/showthread.php?t=2631768
using TWRP and Wiped Dalvik-Cache, System, Cache, Data
funfun99999 said:
i did used this
http://forum.xda-developers.com/showthread.php?t=2631768
using TWRP and Wiped Dalvik-Cache, System, Cache, Data
Click to expand...
Click to collapse
Locked BL or unlocked BL
What firmware were you running before the update?, and was it rooted etc?
blueether said:
Locked BL or unlocked BL
What firmware were you running before the update?, and was it rooted etc?
Click to expand...
Click to collapse
Locked BL + XZDualRecovery2.7.83 BETA
It was on 14.1.B.1.532 flashed ftf to get root and installed XZDualRecovery tried to update to 14.2.A.0.290 using http://forum.xda-developers.com/showthread.php?t=2612980
But the phone did not boot it keep hanging on the boot animation
So I update to 14.2.A.1.136 and it work but after few reboot this problem started.
funfun99999 said:
Locked BL + XZDualRecovery2.7.83 BETA
It was on 14.1.B.1.532 flashed ftf to get root and installed XZDualRecovery tried to update to 14.2.A.0.290 using http://forum.xda-developers.com/showthread.php?t=2612980
But the phone did not boot it keep hanging on the boot animation
So I update to 14.2.A.1.136 and it work but after few reboot this problem started.
Click to expand...
Click to collapse
OK so it was working fine before?
Have you installed xposed, or any modules lately? - I've had that hang a boot
You could always do a reinstall of the rom and then flash the stripped FTF again ie follow the instructions like doing a new install
@[NUT] any other ideas as it's your rom?
blueether said:
OK so it was working fine before?
Have you installed xposed, or any modules lately? - I've had that hang a boot
You could always do a reinstall of the rom and then flash the stripped FTF again ie follow the instructions like doing a new install
@[NUT] any other ideas as it's your rom?
Click to expand...
Click to collapse
yes it works fine
yes i installed xposed
ok i will do it now
you hang was because of xposed?
funfun99999 said:
you hang was because of xposed?
Click to expand...
Click to collapse
I had 1 hang straight after installing xposed and about 5 modules, a reset an it booted up fine - Yes I know I should have activated them 1 at a time
blueether said:
I had 1 hang straight after installing xposed and about 5 modules, a reset an it booted up fine - Yes I know I should have activated them 1 at a time
Click to expand...
Click to collapse
Is the xposed itself or did you find which modules it cause this problem
I just flash the rom again and restored all the apps/date but not the xposed and reboot it 4 time now and no hangs
funfun99999 said:
Is the xposed itself or did you find which modules it cause this problem
I just flash the rom again and restored all the apps/date but not the xposed and reboot it 4 time now and no hangs
Click to expand...
Click to collapse
No I don't know what module it was or even if it was xposed. I only hung the once so I didn't go digging to find out.
blueether said:
No I don't know what module it was or even if it was xposed. I only hung the once so I didn't go digging to find out.
Click to expand...
Click to collapse
Ok thank you very much.
Just remember that Xposed adds a recovery file on your internal storage in case things like these happen. So if Xposed causes any issues, like a bootloop, just boot into recovery and flash the "disable_xposed.zip" (or something with that name) and reboot. Voila.
Hai.
I have a galaxy note 3 sm n9005. Have already rooted by finding forum from xda and even install twrp recovery following the guides given.
But im trying to install custom rom. And tried all the roms tat is given from xda for note 3 and could install single one.
Please help to resolve this problem. Im confuse.
Tq.
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
es0tericcha0s said:
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
Click to expand...
Click to collapse
Im using twrp 3.0.2.1 and everytime i try to install a rom it stuck at samsung screen.
And it show md5 not found.
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
es0tericcha0s said:
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
Click to expand...
Click to collapse
Resurrection remix.unicorn.slim.and all cynogen rom is working. Im trying install s7edge custom rom for darkwolf and darklord. I even updated the bootloader and modem according to tutorial. I used odin to flash them..
N9005xxugboa1
Lrx21v.n9005xxugbob6
I have my stock rom n internl backed up. I try all. And still it always stuck on samsung screen.
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
es0tericcha0s said:
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
Click to expand...
Click to collapse
How can install kernel after. Everytime i install it reboots its self to samsung screen. Or should go back to recovery and install the kernel back. And thank you for your help till now.
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
es0tericcha0s said:
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
Click to expand...
Click to collapse
I have uncheck the reboot after install. When i install the rom it automatically reboot itself. It doesnt show anything or show done. Once it even show os not found.
Hi
Where can i install or find the latest kernel
It's in the installation instructions for the rom.
es0tericcha0s said:
It's in the installation instructions for the rom.
Click to expand...
Click to collapse
Hi.
I have found the bootloader and modem for my sm n9005 from the installation instruction for the rom.
I try to flash according to the tutorial.and my baseband didnt change. I try flash using odin 3times.
Im not sure where i did wrong.can u help me
Tq
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
tq
es0tericcha0s said:
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
Click to expand...
Click to collapse
Tq
Will try and let you know
sitijohn85 said:
Tq
Will try and let you know
Click to expand...
Click to collapse
Hi
I tried as said and it didnt chnge.
Can i ask bootloader should be at bl and modem should be at cp. Is it correct.
Hi
Thank you for your help.
I did the change on bootloader and modem.
Now im i need to know two more thing.
I download 2 dffernt kind of bootloader n modem.
I flash blxxxxxbpb1 and cpxxxxxboj1..this 2 files were tar.md5 files
Another one which i didnt flash. Blxxxxxxbpb1 and cpxxxxxxxbpb2..this 2 files are tar.tar files..
Can i know whats the different with this 2 files.
One more thing is when i chnge the bootloader and modem will the kernel changes. Or is it different.
Please guide me..im confuse.
Someone might have just mislabeled them. Flashing those will not affect kernel. Different partition of the phone.
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
sitijohn85 said:
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
Click to expand...
Click to collapse
This is the recommended kernel
https://www.androidfilehost.com/?fid=24572369242687310
Recommended recovery is TWRP 2.8.7.0 not the newer 3.0+
Flash other recovery. Boot to TWRP. Wipe system, data, cache, dalvik. Flash rom. Wipe caches. Flash kernel. Reboot. Should work according to lots of people on the thread for that rom.
Hi.
How flash kernel.
just flash the tar.md5 file or the tar.zip file