[Q] Cyanogenmod 11 very unestable - Galaxy S III Q&A, Help & Troubleshooting

Hi guys, in the forum for this room read about the rom is very stable for everyone, and i not found informatcion about my problem.
I have a problem since i put the room on my cellphone, i have continusly frezees and i must reboot the system. This happens with every nightly that i have intalled. I make the correct wipes, factory restore and everything for the correct install, and the problem persists. You think is a cellphone problem??? I wait yours suggestions. Thanks for your time and regards!!!

You can use "show cpu usage" in developer options……then a bar of three colors and list of processes are shown on the top-right of your screen.if u get too much blue in the bar then it's iowait problem ,or you can take a look at the process which is mostly on the top of list , and find info about it.

Related

[Q] Clock Time change everytime restart & take-out battery

Hi guys... try to search and google for an answer to my problems but cant find the solutions..
problems : let say i turn on my hd2 at 1.00 pm on12/08/10....
and at 1.30 pm on 13/08/10 i turn off the phone and replace the battery with fresh one .. turn it on... the clock will show the time and date as 1.00pm 12/08/10...
time will be reset back to time i on the phone on the first time and it will continue the cycle...
try hard reset but the bugs still there... clear all my apps.. clean phone... bugs still there....
my phone using stock ROM 1.48,702... everything is stock...
itsx all start after i do some tweaking & installing apps which i hv uninstall now.. but the problemis still there,,..
Anybody have this problems before.. ? any idea / tips for the problems.. thks guys and sorry if this repeating Q ...
Same here, tried hard reset or flash another rom but the problem still here...
Any ideas
Will it be a hardware issue?? Pls help!!
no one know?
HTC service Center advised the following :
1. Take out sim card and storage card to eliminate the error tht maybe caused by this 2 items... i've done it... and restart... walaaa... like a charm it works...
But on fine fine day i install cab file... then the old problem again haunted my hd2...
tried the above methods.. this its no longer worked..
Fed-up, i just let it be like that... then on one fine day.. I install another cab file... CHT and CHT Editor to be exact... walaaa... the old problem eliminated.. hv install/uninstall few cab file after tht (analog clock cab file).. so far everything still ok..
I would like to refresh this topic.
It started to happen to me like month ago from no special reason. I use SD Android build, so with every restart to go back to WM, time/date changes from couple minutes to couple weeks to both directions.
Hard reset did not help. Another ROM flashed did not help.
It seems to occur only when rebooting Android -> WM. WM -> WM reset direction mostly OK. Battery-out almost always changes time/date.
Just a thought: Is there any kind of "CMOS battery" like in PC motherboards, that can be weak/broken in the HD2?
Any advice appreciated
Thanks
doktor2003 said:
I would like to refresh this topic.
It started to happen to me like month ago from no special reason. I use SD Android build, so with every restart to go back to WM, time/date changes from couple minutes to couple weeks to both directions.
Hard reset did not help. Another ROM flashed did not help.
It seems to occur only when rebooting Android -> WM. WM -> WM reset direction mostly OK. Battery-out almost always changes time/date.
Just a thought: Is there any kind of "CMOS battery" like in PC motherboards, that can be weak/broken in the HD2?
Any advice appreciated
Thanks
Click to expand...
Click to collapse
I've got the same problem using Omega rom v30. It's solved easily enough by using sptimesync to get the exact time. What's your rom? I'm gonna flash and see if anything changes
My ROM is:
WM- HD2O
Android - MccM HD V6
This is also happening to me. It's happened before and it somehow corrected itself, but it's really annoying me at the moment. Any ideas as to the cause? Running WM6.5 ROM, stock 3.14. Not running android at all.

[Q] Status bar and task manager problem Sola?

I have a problem with the task manager.. when I enter in it i have a blue screen and i don't know why.
The second problem is about the status bar, when i click on usb conn. mode system ui crashes and the status bar goes away for 3/4 seconds. I'm running Fluidity V2 and the bootloader is unlocked.
Can please someone help me? thanks!
It can be: because you didnt install properly following the DEV instructions or it can be a bug in the ROM mate.
Try reinstaling it.
try a factory reset or check the original rom thread for similar problems

[Q] Wolfbreak 7 loses slide to unlock

Hello everyone,
I searched for a similar topic but I could not find it. If there is a topic like that I would appreciate if somebody could transfer this to the correct place.
I have an Xperia X10 with Wolfbreak 7 Stock (2.3.3) installed and from time to time I am experiencing the same problem. My wife, with the same hardware and software has the same:
The phone, after some time working perfectly, suddenly loses the screen lock and the options “silence mode” and “plane mode” when the start button is pressed and held (only “shutdown” and “restart” are available).
The only way I found to correct that is the factory reset. The problem is I have to configure my accounts again and reinstall all the downloadable apps I use.
Can anybody help me? Is there any correction I could install on my phone or could I use a recovery function to make this process easier?
Thank you in advance.

[Q] How do I fix the black screen on unlock and app freeze?

Hello,
I would like to apologize in advance if the question was posted before, the description is too brief or anything like that since it is my first post here (although I had searched for similar questions but didn't find any with a proper solution).
After installing CM10.2 with GApps on my Galaxy S2 i9100 (actually, before that I tried Firefox OS which messed up my /data, had to repartition manually and it helped then) I tried to install - and run - Triangle Away, but it froze. Then I made a terrible mistake imo: I rebooted. After that (I mean, after flashing CM again since it didn't work at all) I got an issue with the screen going black after unlocking the phone or apps freezing (running launcher, going to 'system settings' etc; tested on Trebuchet, haven't tried any other launcher so far). I also had a problem (again) with broken datafs, but used patched PIT from somewhere in here, I will edit out that post and paste the url to the thread.
Another thing that should be mentioned is that that status/notification bar is working without any problems when the launcher freezes, and when the screen goes black the 'back' and 'menu' buttons give feedback when pressed (they make the phone vibrate but when I press volume up/down there is no sound).
I've already tried doing wipe data/factory reset, cleaning cache and dalvik and wiping system with flashing CM again but without any progress. Also wanted to check adb logcat, but I cannot get into usb debugging settings (launcher freezes when 'system settings' is pressed).
What could be the solution?
Thank you very much for any answers!

[Q] How long did it take for CM 11 20140116-UNOFFICIAL (EOL) of jfbs to install?

Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
theking1st said:
Hi guys. It is my first time to run cyanogenmod on my phone. I have the Samsung Galaxy Exhibit 2 4G and I tried to install the CM 11 of jfbs. I did all the backups and I wiped the data and cache and installed the ROM and Gapps. But I rebooted my device and the Cyanogenmod logo appeared with the spinning arrow and it didn't want to stop spinning (or loading if you want). My phone was stuck on logo and the spinning arrow. I forced the phone to turn off and when I rebooted it I worked but after a little time it went back to the logo and the spinning arrow. I re-installed the ROM and Gapps but like before, the logo and the spinning arrow still there until now and it won't even stop and lead me to the lock screen. PLEASE can somebody tell me if it won't work or what is wrong whit it or if it is matter of time, how long should i wait? PLEASE I need to know what is going on and what to do. :crying:
Click to expand...
Click to collapse
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
cars1189 said:
(as a dev for this phone)
If you could PM me with more details that would be helpful. When i hear that it continues after a reboot(not the first person to have said that) i think its that you are not waiting enough time. That may or may not be the case. I would give it a good 5 min. I have never timed mine but it does seem to me that prior android versions took about 2-3min maybe and for w.e. reason android 4.4(cm-11.0) takes a few more min. Anything over >=10min though id say is too much. In these cases the only things that can really help are logs. Logs are the only way you can show a dev what you are experiencing.
(as a xda member)
Also i would use the device thread not the general android thread, read through the rom thread of the rom you are tryng to install, and a last and final note, I would recommend that anyone that is new to install older more mature roms first. These roms will yield the best experience in most cases. Then once you are familiar you can experiment with other roms/mods etc etc.
Click to expand...
Click to collapse
Thank you @cars1189 for your answer. I used the device thread to do it but the problem is, I let it spinning for more than 5 hours. I have flashed many roms in my phone since i had it (more than 10 times or more) and i know that it does not take more than 10 mins max to install. But don't worry after that i went back and restored my previous CM 9 rom and right now i'm on the CM 11 build of 1-29-14 of your CM mass thread. It works fine, not at 100% but it doesn't drain my battery like your CM 10.2 build of 1-11-14 and it is almost stable. I will try tonight to use your ADC kernel with the jfbs CM 11 rom that first didn't work for me because I saw in your thread that this kernel may help it to load and install without the spinning issue. So i will give it a shoot. But anyways thanks for your answer and it means a lot to me really. :good:
GOOD
@cars1189 , I'm actually running the 6-18-14 build of CM11 and as far as it goes, i'm not encountering any major issue at the moment. The theme engine is working fine for me and battery life is great for my usage. I use this build as a daily driver, and it does a great job. Calls, texts, data, wifi, Bluetooth and GPS are all working. I had issues before with the amount of RAM available, but now that it has 375MB of RAM, it is more snappy. Just :good: Thank you for your work on our to make our phone still valuable today!! THANKS MAN!!!!!!

Categories

Resources