[Q] Camera Problem after update - Galaxy S II Q&A, Help & Troubleshooting

Hello masters of XDA
first of all i swear i have tried to look up other threads about my problem and i found some but with no result and why i wanna post a new thread is to explain my problem FULLY since im not sure that i have the exact same problem
Anyhow .. i have been using my I9100 for about 2 years on the same room which is Hyperdroid Andromida 7 which is a Gingerbread 2.3.7 i believe ... and recently i came to the dicision that i should update since new apps no longer work , and here is what i did :
Nandroid Backup along with SD and Internal backup to PC .. then a FULL wipe of the phone and the SD installed .. and after flashing a new kernel i installed the Resurruction Remix Kitkat 5.0 ROM which is 4.4 i believe
everything seemed cool even though i didnt get the chance to check much after i noticed that the camera wasnt working properly .. there was a lot FC and lagging on both FRONT and BACK
so i tried reflashing and redoing the whole wiping of cach and Delvick and such as .. no hope .. tried a new room that is based on stock JB .. i got better results but there was still lagging that i NEVER experianced in my gingerbread room..
so after i gave up hope with that i tried restoring everything as it was using the nandroid restore .. the results were better than the modified Stock JB but still not the same as before this whole thing ..
if anyone can guide me towards ANY kind of a solution i would be gratefull .. even if it means replacing the Cam i would do it even though i hardly think its a hardware issue

Only stock rom.. Or stock based custom rom gives good camera performance..
From gb to kk . is alot of difference.. In terms of stability.. Lol...
Best is to use a stock 4.1.2 custom rom...

thing is i never faced such thing in any other phones that i flash with custom roms .. and as i said even after i did a nandroid restore after this whole thing to the custom gingerbread that i had .. the cam didnt go back to how it used to be and there is still some kind of lagging
My hypothesis is that after the nandroid restore that i did from the which was going from Custom Stock JB to the Custom Stock Gingerbread .. something related to working of the camera has been left and wasnt effected by nandroid restore and appearently can only be changed when i flash a new room
( i hope i make sense )
so what do you think i should do to restore my cam to fully working condition ? or what should i try ?
doctor_droid said:
Only stock rom.. Or stock based custom rom gives good camera performance..
From gb to kk . is alot of difference.. In terms of stability.. Lol...
Best is to use a stock 4.1.2 custom rom...
Click to expand...
Click to collapse

xAnGeLoSx said:
thing is i never faced such thing in any other phones that i flash with custom roms .. and as i said even after i did a nandroid restore after this whole thing to the custom gingerbread that i had .. the cam didnt go back to how it used to be and there is still some kind of lagging
My hypothesis is that after the nandroid restore that i did from the which was going from Custom Stock JB to the Custom Stock Gingerbread .. something related to working of the camera has been left and wasnt effected by nandroid restore and appearently can only be changed when i flash a new room
( i hope i make sense )
so what do you think i should do to restore my cam to fully working condition ? or what should i try ?
Click to expand...
Click to collapse
At max i can suggest u to make full wipes
Wipe data
Wipe cache
Wipe system
Wipe dalvik
Wipe preload(if present)
And the restore ur nandroid backup
Also i hope u r nt having any placebo effect happens a lot here ..

doctor_droid said:
At max i can suggest u to make full wipes
Wipe data
Wipe cache
Wipe system
Wipe dalvik
Wipe preload(if present)
And the restore ur nandroid backup
Also i hope u r nt having any placebo effect happens a lot here ..
Click to expand...
Click to collapse
even though i tried that before and no hope .. now that i tried it again it got even worst .. the camera opened only once and saw the image just for a sec and then after a while the app failed .. tried third party apps .. same thing .. video mode and front cam is the same
now i flashed the Neat ROM 4.1.2 and still no cam .. i really dont get what happend .. it worked perfectly befor i start this whole thing :S

help anyone .. i really need my camera back

xAnGeLoSx said:
help anyone .. i really need my camera back
Click to expand...
Click to collapse
Tried clearing camera app data???
Also try some camera mod to see if it helps
If nothing works... flash stock rom via odin

doctor_droid said:
Tried clearing camera app data???
Also try some camera mod to see if it helps
If nothing works... flash stock rom via odin
Click to expand...
Click to collapse
already tried the clearing camera app data with no success .. can you please tell me anything about camera modes ??
and apparently the front cam works now while the back fails

xAnGeLoSx said:
already tried the clearing camera app data with no success .. can you please tell me anything about camera modes ??
and apparently the front cam works now while the back fails
Click to expand...
Click to collapse
Why not back up data and flash stock rom ?? No idea about camera modes

doctor_droid said:
Why not back up data and flash stock rom ?? No idea about camera modes
Click to expand...
Click to collapse
First of all thanks for your help mate but so far no luck .. just flashed a pure stock JB Via ODIN and the camera problem is still there .. i dont get what happend .. before going for the kitkat everything was working ( Hardware Wise ) .. now the back came no longer works at all .. am gonna try a stock gingerbread and see if its any help

xAnGeLoSx said:
First of all thanks for your help mate but so far no luck .. just flashed a pure stock JB Via ODIN and the camera problem is still there .. i dont get what happend .. before going for the kitkat everything was working ( Hardware Wise ) .. now the back came no longer works at all .. am gonna try a stock gingerbread and see if its any help
Click to expand...
Click to collapse
If flashing gb stock rom doesnt works... Try flashing a camera mod or use some other camera app like focal(wont work wid gb) or camera360 to cross verify

Related

[Q] no camera wen flashing roms

need a lil help well thanks to all u guys out there heling me im able to flash new roms well thers a problemnow i was on 4.1.26 and flash alien rom with theme looks nice but i look and my camera is gone so i flashed to cherry ie hoeing it was just a rom thing but no camera ther as well did i do something wrong can somebody oint me in the right direction to get my camera / camcorder back thanks
jimmerz0823 said:
need a lil help well thanks to all u guys out there heling me im able to flash new roms well thers a problemnow i was on 4.1.26 and flash alien rom with theme looks nice but i look and my camera is gone so i flashed to cherry ie hoeing it was just a rom thing but no camera ther as well did i do something wrong can somebody oint me in the right direction to get my camera / camcorder back thanks
Click to expand...
Click to collapse
When flashing over alien theme + rom it causes problems. If you use it then wanna use something else, or are having problems and wanna reinstall, do a FULL wipe not just a factory reset or you will have problems. Reboot, wipe everything, wipe Dalvik cache, reinstall ROM + theme. Or new ROM.

[Q] [Help] Forgot to take backup before flashing!

Hi guys. Need your help over ere! As the title suggests, ive forgot to take a backup of my rom before flashing with 'Sensation rom by Crysis'. Now, if i want 2 revert back to the stock rom, what can i do? Also, theres a new v2.5 available for our SGS2s but I cant update nw, as the update option is probably removed on dis rom! Plz help!
You can install a clean stock ROM without any problems. All your stuff that were in the old one are gone though, unless you didn't wipe before installing the new ROM.
TheSaw said:
You can install a clean stock ROM without any problems. All your stuff that were in the old one are gone though, unless you didn't wipe before installing the new ROM.
Click to expand...
Click to collapse
@TheSaw Okay tnx alot buddy!
Im not bothered about my data on device memory, as i hav a backup of my contacts/messages.
Plus, can u give me the link from where i can download the stock rom?
Paul013 said:
@TheSaw Okay tnx alot buddy!
Im not bothered about my data on device memory, as i hav a backup of my contacts/messages.
Plus, can u give me the link from where i can download the stock rom?
Click to expand...
Click to collapse
Here you go
"search button"

[Q] Messaging Force Close

Hi, I've encountered a bit of a problem when I try to download picture messages using the stock Messaging app.
When I try download them it comes up with "Downloading" like normal, but after a few seconds I get a Force Close and can't downoad the picture.
I've tried GoSMS and Handcent and both of these encounter the "Messaging has stopped working" error.
The ROM I'm using is HyDrOG3N-ICS but from what I've posted in the thread, no one else is having this issue. Any ideas?
Thanks.
do a factory wipe an custum rom related ask in tht roms thread ull get better ideas....i dint hav tht prblm anywaz
rocky23 said:
do a factory wipe an custum rom related ask in tht roms thread ull get better ideas....i dint hav tht prblm anywaz
Click to expand...
Click to collapse
I've asked in the ROM thread and I've done several full wipes but it's still not working.
Sent from my GT-I9100 using XDA
Simple wipe phone and test with stock rom no problem = rom .
jje
Right, so I reflashed the stock ROM and it worked.
I've tried a few other ROM's though and it still doesn't. It didn't work on Hydrogen ICS, Westcrip's ROM and it doesn't work on CyanogenMod9.
Any ideas? I obviously don't want to stay on the stock ROM. Could it be an AOSP issue with my phone? Going to try a Sammy ROM and see if that works.
If anyone else is having this problem, I found the solution here:
http://forum.xda-developers.com/showpost.php?p=24343908&postcount=8

[HELP] i9100G Touch Screen Problem after Flash Stock JB France-XEF

After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.

stock rom problem

hey guys, i have the international version of S3, I9300. . I searched a lot for an ics stock rom, and finally found it.. installed it with odin, all good, now rebooting..but its stuck at samsung logo.. and it stays there, and if i go in recovery it shows some red errors, something like ''can't find system dir, or data'', and can't mount them.. installed another recovery, tried twrp, and cwm.. and i saw that system partition is 1044 mb occupied, so the rom is there, installed.. but.. can't boot.. also, every ics rom tried isnt working, just isn't booting.. only 4.1.1 + ... i want to try ics because im fed up with ram problems and poor battery life.. it should be 1 gb ram, and my battery is 2850 mAh ... :/ ...some help.. thank you
after flashing ics rom,boot to stcok recovery. select wipe data & cache then reboot. first boot will take 5-10 min.
Sureshtuty said:
after flashing ics rom,boot to stcok recovery. select wipe data & cache then reboot. first boot will take 5-10 min.
Click to expand...
Click to collapse
thakns for replyin.. i did that, or..i tried..when i hit wipe data and cache, the same errors apears.. can't mount that dir.. system, data, cache, as if they not exist...still stuck at samsung logo...
ps.. tried cm9, still stuck at boot..
You can't go back from a newer JB-firmware to ICS easily: it has another efs-format (makes loose IMEI) and needs another bootloader. Use search function to inform.
ICS isn't necessary for good battery life. Try NCS-ROM (JB) or Slim (KK or LP).
rp158 said:
You can't go back from a newer JB-firmware to ICS easily: it has another efs-format (makes loose IMEI) and needs another bootloader. Use search function to inform.
ICS isn't necessary for good battery life. Try NCS-ROM (JB) or Slim (KK or LP).
Click to expand...
Click to collapse
i will stick with NCS ROM, good ram management, very light rom.. KK is boring and not baterry friendly.. and lollipop is too laggy.. so ics isn't worth it on S3?
I used NCS for 1 year, but JB isn't safe anymore. So I'm on SlimLP. It runs fine, if you don't install elephants. As batteryfriendly as TW. ICS is out of area IMO and tricky to go back.
But if you have such strict opinions about various Androidversions, why do you ask?
rp158 said:
I used NCS for 1 year, but JB isn't safe anymore. So I'm on SlimLP. It runs fine, if you don't install elephants. As batteryfriendly as TW. ICS is out of area IMO and tricky to go back.
But if you have such strict opinions about various Androidversions, why do you ask?
Click to expand...
Click to collapse
well,i tried so many roms and my favorite android version is lollipop..but every lp rom tried ... the ui feels laggy.. can't compare it to stock lollipop on other phones , and that is annoying.. my opinions are not that strict, its just.. every android version left me with an impression.. btw, what do u mean with JB isn't safe ?
security leaks...
shadyslim20 said:
thakns for replyin.. i did that, or..i tried..when i hit wipe data and cache, the same errors apears.. can't mount that dir.. system, data, cache, as if they not exist...still stuck at samsung logo...
ps.. tried cm9, still stuck at boot..
Click to expand...
Click to collapse
You can go back to jb to ics. If you face imei lost problem, u can easily fix it by flashing modem.
Try this Ics custom rom. Epsilon Project - ICS - V3 and use older version of cwm recovery to flash this rom.
I tried this rom a month ago good battery life than other roms. But ics rom don't support more new apps
I suggest you to try Liquid smooth KK rom Use greenify and Amplify to get good battery life.
Sureshtuty said:
You can go back to jb to ics. If you face imei lost problem, u can easily fix it by flashing modem.
Try this Ics custom rom. Epsilon Project - ICS - V3 and use older version of cwm recovery to flash this rom.
I tried this rom a month ago good battery life than other roms. But ics rom don't support more new apps
I suggest you to try Liquid smooth KK rom Use greenify and Amplify to get good battery life.
Click to expand...
Click to collapse
how did u tried that rom ? download link isn't working... and i tried many ics roms, everything under 4.1.1 isn't working, stuck at samsung logo...
Sent from my GT-I9300 using XDA Free mobile app
Sureshtuty said:
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
well, i see the rom , but how did u get it? download link isn't working...or can u upload it somewhere pls ?

Categories

Resources