Stuck on splash screen and cant get into recovery, any suggestions? - HTC Droid DNA

So I flashed [4.4.2] Sense 5.5 | KitKat | 4.19.401.8 rom and now my phone is stuck on the HTC screen and I cant get into recovery or bootloader by holding the power down button, any suggestions? I cant restart the phone by holding the button down.

I'm having the same issue after flashing that ROM. I can boot to the bootloader but when I try to get into recovery, TWRP will flash on the screen for a second and then reboot to the white DNA loading screen. It never gets past that.
I've flashed a couple of different recoveries and that didn't change anything. I also flashed the 1.54.0000 hboot and that didn't make a difference either.
---------- Post added at 01:04 PM ---------- Previous post was at 12:12 PM ----------
I managed to get my phone back to a working state. I followed the directions in:
http://forum.xda-developers.com/showpost.php?p=48498759&postcount=1
So at least I'm back to a functioning stock ROM and I can go from there.

rapidswing said:
I'm having the same issue after flashing that ROM. I can boot to the bootloader but when I try to get into recovery, TWRP will flash on the screen for a second and then reboot to the white DNA loading screen. It never gets past that.
I've flashed a couple of different recoveries and that didn't change anything. I also flashed the 1.54.0000 hboot and that didn't make a difference either.
---------- Post added at 01:04 PM ---------- Previous post was at 12:12 PM ----------
I managed to get my phone back to a working state. I followed the directions in:
http://forum.xda-developers.com/showpost.php?p=48498759&postcount=1
So at least I'm back to a functioning stock ROM and I can go from there.
Click to expand...
Click to collapse
How did you get it to boot? My phone is stuck on the HTC screen and I cant reboot it at all.

Sorry, I missed the part where you couldn't get into the bootloader. The bootloader was still working for me, so I was able to use fastboot.

So holding down the power button until the device shuts off then holding down power+vol down won't let you into the bootloader?
Sent from my Nexus 7 using XDA Premium HD app

.torrented said:
So holding down the power button until the device shuts off then holding down power+vol down won't let you into the bootloader?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
After holding the power button down for nearly 10 minutes it rebooted into bootloader but I cant get into recovery, It flashes the screen and yet I cant do anything. I flashed twrp and clockword betas but it just flashes and reboots

Get into the bootloader connect to fastboot and open a command prompt and type fastboot erase cache and then see if you can boot into recovery. That usually helps or that's what I did when I was faced with a similar issue.
Sent from my HTC Droid DNA using XDA Premium 4 mobile app

Jaggar345 said:
Get into the bootloader connect to fastboot and open a command prompt and type fastboot erase cache and then see if you can boot into recovery. That usually helps or that's what I did when I was faced with a similar issue.
Sent from my HTC Droid DNA using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It worked Thank you for your help!

Related

Bricked Thunderbolt

I recently ran revolutionary on a HTC Thunderbolt, and the process finished...It is now S-off. I installed CWM, and was going to install SU and flash a ROM. But the volumes keys don't work with any consistency so I could not maneuver. It eventually tried to update itself OTA and the phone bricked. It would shut down right after it booted up, I then flashed and old RUU, and now have no recovery. I am completely frustrated with this Phone, what can I do. I have tried flashing TWRP recovery, but it just installs over and over, I need to install a recovery and at this time are unable to do so.I am still running a stock ROM, but I am S-off, Is it possible to flash a ROM out of bootloader, as that is all I can access right now. IS their a Linux unbricker for this phone, as there is for others.
Currently it freezes on the HTC splash screen, and when I can get into the bootloader, I can not access recovery or any other options except HBOOT
Have you tried installing a recovery using ADB, and then downloading a Rom on your pc, copy to your SD, and then install from the recovery you pushed to it? Not sure if that's how you tried installing the recovery or not..
Sent from my Thunderbolt using xda app-developers app
woodt94 said:
Have you tried installing a recovery using ADB, and then downloading a Rom on your pc, copy to your SD, and then install from the recovery you pushed to it? Not sure if that's how you tried installing the recovery or not..
Sent from my Thunderbolt using xda app-developers app
Click to expand...
Click to collapse
Don't know how, but I would try anything.
Now that I think more on it that probably won't work.. I'm not too familiar with ADB pushing and such but that might be the way to flash a different Rom in hboot. Try looking into the thunderbolt tool from the development section and see if there's anything I'm that program that could help you
Sent from my Thunderbolt using xda app-developers app
woodt94 said:
Now that I think more on it that probably won't work.. I'm not too familiar with ADB pushing and such but that might be the way to flash a different Rom in hboot. Try looking into the thunderbolt tool from the development section and see if there's anything I'm that program that could help you
Sent from my Thunderbolt using xda app-developers app
Click to expand...
Click to collapse
Doesn't the phone have to actually be able to boot in to the ROM to use the Thunderbolt tool, it just freezes as the Splash screen
I'm not sure. The tool is a program you install on your computer. I've personally never used it before, haven't had the need. In one of the screen shots there is a "unbrick menu" followed by coming soon but I'm not sure if it's been updated or not. There is also a recovery installer menu
Sent from my Thunderbolt using xda app-developers app
---------- Post added at 12:52 AM ---------- Previous post was at 12:48 AM ----------
Maybe see if you could unroot with it because that will return you to original firmware and then re root?
Sent from my Thunderbolt using xda app-developers app
I tried flashing TWRP, and each time I try to access recovery, it is in a loop of installing TWRP, the same thing happens when I try to reset to factory.
Try this. http://forum.xda-developers.com/showthread.php?t=1179386
Sent from my Thunderbolt using xda app-developers app
I am working on a HTC Thunderbolt that is S-off and rooted, but the user took the OTA update, and now the phone freezes at the splash screen.
Is there a way to recover from this
bgduece22 said:
I am working on a HTC Thunderbolt that is S-off and rooted, but the user took the OTA update, and now the phone freezes at the splash screen.
Is there a way to recover from this
Click to expand...
Click to collapse
Did that method of flashing recovery not work?
Sent from my Thunderbolt using xda app-developers app
---------- Post added at 12:11 PM ---------- Previous post was at 12:02 PM ----------
It is possible to flash a ruu following the same steps
Sent from my Thunderbolt using xda app-developers app
I was able to flash the latest ClockworkMod but it still won't boot, I flashed the RUU back to stock, but is still sticks at the splash screen, but it does skip the HBOOT each time, since I have a protected HBOOT from revolutionary when I rooted the phone and got to s-off.
I have to figure out out how to install a stock HBOOT and start over from what I read.
Sorry I couldn't have been more help, that's everything that I can think of. Good luck!
Sent from my Thunderbolt using xda app-developers app
I have a solution...I was able through ADB to roll back the HBOOT to the non protected mode that it was put in when I rooted the phone, and was able to flash a Stock recovery through ADB. I then rooted the phone and gained s-off which gave me control once again.
I think when he took the OTA it wiped out his recovery & root.
I am just glad that I got it fixed.

Q regarding a HTC Amaze 4g stuck on htc screen

I've searched far and wide for an answer to this. This Amaze 4g is my cousins phone and currently the phone is stuck on the HTC boot screen.
I've followed directions and downloaded the
OTA_RUBY_ICS_35_S_TMOUS_2.14.531.3-1.43.531.3_release_259660ggzpa27mj01s2ayu.zip
and renamed it into PH85IMG on an external SD card. I booted the phone to the bootloader and into fastboot to allow it to load the file and return to stock. I've waited at least 30 minutes every time i tried to make it boot and am currently lost on what to do. The phone is S-On and stock.
Wondering if anyone can point me in the right direction... Thanks!
Is the bootloader locked or unlocked?
Sent from my HTC_Amaze_4G using xda app-developers app
Unlocked.
Shall I lock it?
lilotimz said:
Unlocked.
Shall I lock it?
Click to expand...
Click to collapse
Yes. To flash a RUU, you need to have a locked bootloader.
Also, you're trying to flash an OTA. That won't work with the method you're using. Use this RUU http://d-h.st/3VD and rename it to PH85IMG and then put it on the external sdcard. That should work.
Thanks mate. That worked!
how?
and how do you relock the bootloader i got this phone unlocked all i did was root it and try to install a rom like i do on my Samsung Note with clockwork mod recovery... but it got stuck on the htc logo,
can you please help
ZekeAyumid said:
and how do you relock the bootloader i got this phone unlocked all i did was root it and try to install a rom like i do on my Samsung Note with clockwork mod recovery... but it got stuck on the htc logo,
can you please help
Click to expand...
Click to collapse
Use my toolkit.
Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.
bcbbc2202 said:
Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.
Click to expand...
Click to collapse
I was getting that on the v4 toolkit also. If you manually boot your phone into bootloader and then use the toolkit, it should work. Had to install the 4ext recovery that way after going back to stock.
bcbbc2202 said:
Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.
Click to expand...
Click to collapse
have you enabled usb debugging mode via "settings > development options> usb debugging mode" that might be your issue if your getting "waiting for device"
Ninjistix said:
have you enabled usb debugging mode via "settings > development options> usb debugging mode" that might be your issue if your getting "waiting for device"
Click to expand...
Click to collapse
my phone is stuck on htc screen when i turn it on, how can i get into the phone settings? sorry, i"m real new
jackfzhao said:
my phone is stuck on htc screen when i turn it on, how can i get into the phone settings? sorry, i"m real new
Click to expand...
Click to collapse
Pull your battery to shut phone off. Put the battery back in and replace the cover.
Then press volume down and hold it while you press and then release the power button. Then release the volume button.
Sent from my HTC Amaze 4G using XDA Premium 4 mobile app

[Q][SOS] blank screen after install chainfire 3d

hy evevy body
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
now i just can enter fastboot via fastboot via terminal in windows,
i just push vol down+power button and then i push power button again to enter fastboot, my scren still black
when i type fastboot devices it shown my device
what can i do with that
thx 4advice
paijo0708 said:
hy evevy body
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
now i just can enter fastboot via fastboot via terminal in windows,
i just push vol down+power button and then i push power button again to enter fastboot, my scren still black
when i type fastboot devices it shown my device
what can i do with that
thx 4advice
Click to expand...
Click to collapse
Can you get into the recovery via fastboot?
DjDom said:
Can you get into the recovery via fastboot?
Click to expand...
Click to collapse
i suposed i can.
the step to enter fasfboot are :
1. press vol down+power
2. wait few seconds and then press vol down
3. press power again
i do that with black screen condition
sorry for my bad english
Flash a new bootloader in Fastboot USB and a recovery and you should be able to tweak your way from there by flashing a new ROM.
MistedEvo said:
Flash a new bootloader in Fastboot USB and a recovery and you should be able to tweak your way from there by flashing a new ROM.
Click to expand...
Click to collapse
is "Flash a new bootloader" change the hboot? i mean i`m using hboot 1.50 and i have to update it?
or just change the boot from an ROM.
thx
Blank screen? Mine got stuck on htc logo a while back. It's not meant to be working on ics. I made a backup before, just in case and restored it. All was fine after. Flashing the same rom over, without cleaning any partitions should work fine too. But in your case i am not sure it will work.
put a recovery.img in your fastboot folder and then put your phone in fastboot mode then type "fastboot flash recovery recovery.img" then try to boot recovery again if it still doesnot work, try "fastboot boot recovery.img" but IMO chainfire should not affect your hboot and recovery. If nothing works you can use RUU.
mnomaanw said:
put a recovery.img in your fastboot folder and then put your phone in fastboot mode then type "fastboot flash recovery recovery.img" then try to boot recovery again if it still doesnot work, try "fastboot boot recovery.img" but IMO chainfire should not affect your hboot and recovery. If nothing works you can use RUU.
Click to expand...
Click to collapse
didn't work man :crying::crying::crying::crying:
my lcd still blank
is chainfire 3d flash my gpu firmware, so my gpu got in wrong 'state' so it wont work?
can i reflash my gpu firmware?
I'm a bit confused. So you said the screen is black even while in hboot?
And you are cdma, right? S-on or s-off? And to get into fastboot usb i think it is more like, power off your phone completely, if you were using sense 3.6 rom i guess it is a good idea to remove the battery for a sec in case fast boot was enabled in settings, then pwr+voldwn, wait a moment, pwr again and now you should be on fastboot.
Then on pc make sure you have installed all the required drivers for your phone and download fastboot. Connect your phone to the pc. Copy a recovery.img on the folder on your pc where fastboot executable is located. Then shift + right click on an empty space in that folder and create a terminal (cmd) there. Run fastboot flash recovery.img. then try to boot into recovery again. So shut down your phone again. Then pwr + voldwn. Again voldwn and now it should boot into recovery. You may also use 'fastboot reboot recovery' from fastboot instead of this i guess. If it doesnt work do fastboot boot recovery.img. If you are s-off you can just flash a ruu if it didn't work, but you will lose root ofcourse. If s-on you need to relock bootloader in fastbbot mode with 'fastboot oem lock' and then flash the ruu. I dont have time to find a ruu for you, so you better google for it yourself. Make sure to choose the appropriate ruu for your phone. To flash the ruu you just open the downloaded ruu.exe file and it will start flashind. It will take time and will tell you when it is done. If you are s-off i am not sure if you need to relock the bootloader but i guess you should not. If you are on a custom hboot(only possible if you are s-off), please no way lock your bootloader it will hardbrick it!
You may send me a pm. And i will do what i can to help you.
---------- Post added at 02:44 AM ---------- Previous post was at 02:11 AM ----------
And if you are not s-off i would reccommend you to go s-off after you have fixed this issue. Wire trick is the easiest way to gain s-off imho. Just go to this page and read the info on how to do this. I got s-off on my second try. It must be timed correctly. If anything goes wrong read the troubleshooting section. http://unlimited.io/juopunutbear.htm
And as always, if you need any help feel free to pm me.
MrJyrks said:
I'm a bit confused. So you said the screen is black even while in hboot?
Click to expand...
Click to collapse
yes, my screen is black while in hboot.
MrJyrks said:
And you are cdma, right? S-on or s-off?
Click to expand...
Click to collapse
yes my evo 3d is CDMA in S-on mode, but unlock
MrJyrks said:
Then on pc make sure you have installed all the required drivers for your phone and download fastboot. Connect your phone to the pc. Copy a recovery.img on the folder on your pc where fastboot executable is located. Then shift + right click on an empty space in that folder and create a terminal (cmd) there. Run fastboot flash recovery.img. then try to boot into recovery again. So shut down your phone again. Then pwr + voldwn. Again voldwn and now it should boot into recovery. You may also use 'fastboot reboot recovery' from fastboot instead of this i guess.
Click to expand...
Click to collapse
i have done that step, I have been success when flashing the recovery. when i turned it off, then turn it on again, my screen still black
when i tried boot from recovery boot,my screen still black too.
MrJyrks said:
If s-on you need to relock bootloader in fastbbot mode with 'fastboot oem lock' and then flash the ruu.
Click to expand...
Click to collapse
i'll try this thing
MrJyrks said:
I dont have time to find a ruu for you, so you better google for it yourself. Make sure to choose the appropriate ruu for your phone.
Click to expand...
Click to collapse
what make the rru different from me and the other? how to make sure is that ruu appropriate for my phone?
thanks for all your advice man, i'll try
paijo0708 said:
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
Click to expand...
Click to collapse
Did you see this in the description of Chainfire 3D in the description on the Play Store:
!! For Froyo and Gingerbread ONLY. NOT COMPATIBLE with Honeycomb/Ice Cream Sandwich/Jelly Bean !!
Click to expand...
Click to collapse
Given that "NOT COMPATIBLE" is in caps, I'd suggest contacting the developer via his website or email in the Play Store listing and ask him what happens when it's run on ICS.
ramjet73
The RUU should be different on every carrier model and you must download the ICS RUU. For example, if you have a Sprint branded evo 3d, google for sprint evo 3d ics ruu. Also you should know the cdma version of evo 3d is alternatively named shooter and gsm version shooter u. I think it's relatively easy to find a ruu for your device. Please make sure your phones battery is fully charged before flashing and do not remove the usb cable before the process has completed. The ruu should be with .exe file extension. Just run the ruu and read the onscreen instructions.
---------- Post added at 01:21 PM ---------- Previous post was at 01:14 PM ----------
Oh and btw if you have got the wrong ruu the ruu should not flash. And please, dont ever flash CF3D on anything other than GB. And it is safer to have s off in my opinion but you should not do anything stupid if s off because it's easier to revive a s on device if bricked.
---------- Post added at 01:32 PM ---------- Previous post was at 01:21 PM ----------
Oh and as you are s on dont even bother flashing a new hboot as one has adviced.
---------- Post added at 01:40 PM ---------- Previous post was at 01:32 PM ----------
And if you didnt know a ruu will flash a hboot, rom and firmware. It must fix it. If it does not, there must be a hardware problem.
---------- Post added at 01:50 PM ---------- Previous post was at 01:40 PM ----------
And i dont get it why it didn't work. It works perfectly fine on sense 3.6 roms. At least it worked for me with the experimental driver.
---------- Post added at 01:55 PM ---------- Previous post was at 01:50 PM ----------
And use 4ext touch recovery, it seems to be more stable. To install just download app from play store and select install recovery from the app BUT you must be already rooted to flash the new recovery from the app. So to get s off back just do the htcdev method. fastboot flash recovery. Boot into recovery. Flash the root zip and then dl the app. The full version is a better option imho. It costs a little but its worth it.
Sounds like a hardware issue to me. How can CF3D affect hboot and recovery? It only touches the ROM.
@OP do you see a black light when you turn on the phone or your screen does not even light up.
I have installed CF3D on almost every ROM available for CDMA EVO 3D , just to mess around and it does not affect anything except the 3D graphics in games .They will get better or in worst case no 3D games at all only black screen but 2D HUD menu etc are visible.
And go s-off with juopunutbear. It is super easy with the correct timing. I watched a video to get the correct timing. And as far as i know s off should be required for jellybean roms.
---------- Post added at 02:09 PM ---------- Previous post was at 02:04 PM ----------
You just better flash a ruu. I dont think it is a hw issue if you had the screen functioning just before installing cf3d.
---------- Post added at 02:13 PM ---------- Previous post was at 02:09 PM ----------
If it doesnt work after flashing a ruu there is nothing we could do and you need to send it in for repair.
Nexus 7 (2013) black screen after installing chainfire 3D
paijo0708 said:
hy evevy body
I need help, plss
After install chainfire 3D on my nexus he is turn off,and i turn on but when is turn on,screen is black,and i can't fix.
I'm try wipe reset/factory but don't work,i connect with PC,but i can't see on PC my nexus,
How fix this problem
Plss help me
Thanks
Sry on my bad english
Click to expand...
Click to collapse

Can't restore. Have no OS, where can I get the stock rom again?

Ok so I have no OS and I want to get back my stock rom for 4.4.2.... unlocked bootloader, rooted, keeps goin to twrp when I reboot or restart. accidentally deleted my recovery and os.....
I been trying to figure out why adb won't work but it keeps saying it can't find the device. I installed and reinstalled drivers and no luck, the only time it showed the serial number was when I was in recovery mode, I rebooted and tried to go on fastboot but no luck.
I I tried RUU and locked my phone again but no luck because stupid netbook always freezes at the last step before it tries to restore the stock rom -_- then I unlocked it again and kept trying with ADB
So I had this same problem. Just figured it out today. Do you have the HTC one all in one tool kit?
Sent from my HTC One using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:49 AM ----------
I downloaded a ROM from here http://forum.xda-developers.com/showthread.php?t=2353812 then used the all in one toolkit to adb sideload the ROM I downloaded. I did rename it to update.zip and I had my bootloader unlocked and had TWRP installed. The RUU's failed for me. I tried 3 and had factory recovery, was locked. No go. Sideloading with the toolkit worked! Hope this helps if you haven't already figured it out
Sent from my HTC One using xda app-developers app
evo-t said:
So I had this same problem. Just figured it out today. Do you have the HTC one all in one tool kit?
Sent from my HTC One using xda app-developers app
---------- Post added at 12:01 PM ---------- Previous post was at 11:49 AM ----------
I downloaded a ROM from here http://forum.xda-developers.com/showthread.php?t=2353812 then used the all in one toolkit to adb sideload the ROM I downloaded. I did rename it to update.zip and I had my bootloader unlocked and had TWRP installed. The RUU's failed for me. I tried 3 and had factory recovery, was locked. No go. Sideloading with the toolkit worked! Hope this helps if you haven't already figured it out
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Ok I will give it a try thanks!!
No problem, I've been having the same problem as you and figured I'd try an help since it worked for me.
Sent from my HTC One using xda app-developers app
btort1 said:
Ok so I have no OS and I want to get back my stock rom for 4.4.2.... unlocked bootloader, rooted, keeps goin to twrp when I reboot or restart. accidentally deleted my recovery and os.....
I been trying to figure out why adb won't work but it keeps saying it can't find the device. I installed and reinstalled drivers and no luck, the only time it showed the serial number was when I was in recovery mode, I rebooted and tried to go on fastboot but no luck.
I I tried RUU and locked my phone again but no luck because stupid netbook always freezes at the last step before it tries to restore the stock rom -_- then I unlocked it again and kept trying with ADB
Click to expand...
Click to collapse
Did you try zipping the ruu via adb? I zipped the official firmware, stock recovery and ruu via adb and was back at stock after locking the bootloader. I am s off with supercid.

PLEASE HELP! Corruption Error

Trying to re-install TWRP after the marshmallow update, and now when i reboot the device, an error pops up over the LG boot screen saying my software cant be checked for corruption. Not sure what i did or how to fix this issue, any and all help is accepted please!!
Means the bootloaders unlocked
Sent from my LG-H901 using XDA-Developers mobile app
---------- Post added at 10:24 AM ---------- Previous post was at 10:24 AM ----------
Let it boot
Sent from my LG-H901 using XDA-Developers mobile app
if it is unlocked, i cant load twrp.
Bildo41383 said:
if it is unlocked, i cant load twrp.
Click to expand...
Click to collapse
There's no twrp for it that I know of yet
Sent from my LG-H901 using XDA-Developers mobile app
Bildo41383 said:
if it is unlocked, i cant load twrp.
Click to expand...
Click to collapse
You flashed old recovery for lollipop on mm, that's your problem. If the computer recognizes your phone you'll have to flash the stock recovery img for mm, when it is available. Try pressing and holding volume down while plugging in usb connected to pc. You should be able to enter fastboot mode that way.
Swizzle82 said:
You flashed old recovery for lollipop on mm, that's your problem. If the computer recognizes your phone you'll have to flash the stock recovery img for mm, when it is available. Try pressing and holding volume down while plugging in usb connected to pc. You should be able to enter fastboot mode that way.
Click to expand...
Click to collapse
hahaha, well now that makes sense. who brought the new guy, hahaha. thanks for the info.
I can get into the fastboot menu, but its stuck at the reboot screen so i cant continue with the process after than, and then my computer gets stuck "waiting for devices". oh well, phone still works right now, ill just have to wait for the super groovy dev on here to put out the marshmallow software that i require.
again thanks for the knowledge.
i did the update via LG Bridge and it seems to have relocked my bootloader.
YrrchSebor said:
i did the update via LG Bridge and it seems to have relocked my bootloader.
Click to expand...
Click to collapse
Of course. It should be able to be unlocked again from what I'm seeing.
Same as before, fastboot oem unlock or whatever it was, but when I did that under LP, I don't remember the phone resetting everything back to square one, which it does now.
Swizzle82 said:
Of course. It should be able to be unlocked again from what I'm seeing.
Click to expand...
Click to collapse
chernabog88008 said:
Same as before, fastboot oem unlock or whatever it was, but when I did that under LP, I don't remember the phone resetting everything back to square one, which it does now.
Click to expand...
Click to collapse
Unlocking the bootloader factory resets.
There is two for mm v10 already, and the bootloader is unlocked, the problem is that a lot of the fastboot commands are locked up... So we can't fastboot recovery, and without that we can't root.
Common sense isn't all that common

Categories

Resources