Q regarding a HTC Amaze 4g stuck on htc screen - HTC Amaze 4G

I've searched far and wide for an answer to this. This Amaze 4g is my cousins phone and currently the phone is stuck on the HTC boot screen.
I've followed directions and downloaded the
OTA_RUBY_ICS_35_S_TMOUS_2.14.531.3-1.43.531.3_release_259660ggzpa27mj01s2ayu.zip
and renamed it into PH85IMG on an external SD card. I booted the phone to the bootloader and into fastboot to allow it to load the file and return to stock. I've waited at least 30 minutes every time i tried to make it boot and am currently lost on what to do. The phone is S-On and stock.
Wondering if anyone can point me in the right direction... Thanks!

Is the bootloader locked or unlocked?
Sent from my HTC_Amaze_4G using xda app-developers app

Unlocked.
Shall I lock it?

lilotimz said:
Unlocked.
Shall I lock it?
Click to expand...
Click to collapse
Yes. To flash a RUU, you need to have a locked bootloader.
Also, you're trying to flash an OTA. That won't work with the method you're using. Use this RUU http://d-h.st/3VD and rename it to PH85IMG and then put it on the external sdcard. That should work.

Thanks mate. That worked!

how?
and how do you relock the bootloader i got this phone unlocked all i did was root it and try to install a rom like i do on my Samsung Note with clockwork mod recovery... but it got stuck on the htc logo,
can you please help

ZekeAyumid said:
and how do you relock the bootloader i got this phone unlocked all i did was root it and try to install a rom like i do on my Samsung Note with clockwork mod recovery... but it got stuck on the htc logo,
can you please help
Click to expand...
Click to collapse
Use my toolkit.

Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.

bcbbc2202 said:
Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.
Click to expand...
Click to collapse
I was getting that on the v4 toolkit also. If you manually boot your phone into bootloader and then use the toolkit, it should work. Had to install the 4ext recovery that way after going back to stock.

bcbbc2202 said:
Hi
I have the same problem, but can't seem to relock the bootloader. I have a "waiting for device" issue.
Tried restarting, nothing is happening.
Any help would be appreciated.
Thanks.
---------- Post added at 06:38 PM ---------- Previous post was at 05:47 PM ----------
Relocked.
Click to expand...
Click to collapse
have you enabled usb debugging mode via "settings > development options> usb debugging mode" that might be your issue if your getting "waiting for device"

Ninjistix said:
have you enabled usb debugging mode via "settings > development options> usb debugging mode" that might be your issue if your getting "waiting for device"
Click to expand...
Click to collapse
my phone is stuck on htc screen when i turn it on, how can i get into the phone settings? sorry, i"m real new

jackfzhao said:
my phone is stuck on htc screen when i turn it on, how can i get into the phone settings? sorry, i"m real new
Click to expand...
Click to collapse
Pull your battery to shut phone off. Put the battery back in and replace the cover.
Then press volume down and hold it while you press and then release the power button. Then release the volume button.
Sent from my HTC Amaze 4G using XDA Premium 4 mobile app

Related

[Q][SOS] blank screen after install chainfire 3d

hy evevy body
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
now i just can enter fastboot via fastboot via terminal in windows,
i just push vol down+power button and then i push power button again to enter fastboot, my scren still black
when i type fastboot devices it shown my device
what can i do with that
thx 4advice
paijo0708 said:
hy evevy body
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
now i just can enter fastboot via fastboot via terminal in windows,
i just push vol down+power button and then i push power button again to enter fastboot, my scren still black
when i type fastboot devices it shown my device
what can i do with that
thx 4advice
Click to expand...
Click to collapse
Can you get into the recovery via fastboot?
DjDom said:
Can you get into the recovery via fastboot?
Click to expand...
Click to collapse
i suposed i can.
the step to enter fasfboot are :
1. press vol down+power
2. wait few seconds and then press vol down
3. press power again
i do that with black screen condition
sorry for my bad english
Flash a new bootloader in Fastboot USB and a recovery and you should be able to tweak your way from there by flashing a new ROM.
MistedEvo said:
Flash a new bootloader in Fastboot USB and a recovery and you should be able to tweak your way from there by flashing a new ROM.
Click to expand...
Click to collapse
is "Flash a new bootloader" change the hboot? i mean i`m using hboot 1.50 and i have to update it?
or just change the boot from an ROM.
thx
Blank screen? Mine got stuck on htc logo a while back. It's not meant to be working on ics. I made a backup before, just in case and restored it. All was fine after. Flashing the same rom over, without cleaning any partitions should work fine too. But in your case i am not sure it will work.
put a recovery.img in your fastboot folder and then put your phone in fastboot mode then type "fastboot flash recovery recovery.img" then try to boot recovery again if it still doesnot work, try "fastboot boot recovery.img" but IMO chainfire should not affect your hboot and recovery. If nothing works you can use RUU.
mnomaanw said:
put a recovery.img in your fastboot folder and then put your phone in fastboot mode then type "fastboot flash recovery recovery.img" then try to boot recovery again if it still doesnot work, try "fastboot boot recovery.img" but IMO chainfire should not affect your hboot and recovery. If nothing works you can use RUU.
Click to expand...
Click to collapse
didn't work man :crying::crying::crying::crying:
my lcd still blank
is chainfire 3d flash my gpu firmware, so my gpu got in wrong 'state' so it wont work?
can i reflash my gpu firmware?
I'm a bit confused. So you said the screen is black even while in hboot?
And you are cdma, right? S-on or s-off? And to get into fastboot usb i think it is more like, power off your phone completely, if you were using sense 3.6 rom i guess it is a good idea to remove the battery for a sec in case fast boot was enabled in settings, then pwr+voldwn, wait a moment, pwr again and now you should be on fastboot.
Then on pc make sure you have installed all the required drivers for your phone and download fastboot. Connect your phone to the pc. Copy a recovery.img on the folder on your pc where fastboot executable is located. Then shift + right click on an empty space in that folder and create a terminal (cmd) there. Run fastboot flash recovery.img. then try to boot into recovery again. So shut down your phone again. Then pwr + voldwn. Again voldwn and now it should boot into recovery. You may also use 'fastboot reboot recovery' from fastboot instead of this i guess. If it doesnt work do fastboot boot recovery.img. If you are s-off you can just flash a ruu if it didn't work, but you will lose root ofcourse. If s-on you need to relock bootloader in fastbbot mode with 'fastboot oem lock' and then flash the ruu. I dont have time to find a ruu for you, so you better google for it yourself. Make sure to choose the appropriate ruu for your phone. To flash the ruu you just open the downloaded ruu.exe file and it will start flashind. It will take time and will tell you when it is done. If you are s-off i am not sure if you need to relock the bootloader but i guess you should not. If you are on a custom hboot(only possible if you are s-off), please no way lock your bootloader it will hardbrick it!
You may send me a pm. And i will do what i can to help you.
---------- Post added at 02:44 AM ---------- Previous post was at 02:11 AM ----------
And if you are not s-off i would reccommend you to go s-off after you have fixed this issue. Wire trick is the easiest way to gain s-off imho. Just go to this page and read the info on how to do this. I got s-off on my second try. It must be timed correctly. If anything goes wrong read the troubleshooting section. http://unlimited.io/juopunutbear.htm
And as always, if you need any help feel free to pm me.
MrJyrks said:
I'm a bit confused. So you said the screen is black even while in hboot?
Click to expand...
Click to collapse
yes, my screen is black while in hboot.
MrJyrks said:
And you are cdma, right? S-on or s-off?
Click to expand...
Click to collapse
yes my evo 3d is CDMA in S-on mode, but unlock
MrJyrks said:
Then on pc make sure you have installed all the required drivers for your phone and download fastboot. Connect your phone to the pc. Copy a recovery.img on the folder on your pc where fastboot executable is located. Then shift + right click on an empty space in that folder and create a terminal (cmd) there. Run fastboot flash recovery.img. then try to boot into recovery again. So shut down your phone again. Then pwr + voldwn. Again voldwn and now it should boot into recovery. You may also use 'fastboot reboot recovery' from fastboot instead of this i guess.
Click to expand...
Click to collapse
i have done that step, I have been success when flashing the recovery. when i turned it off, then turn it on again, my screen still black
when i tried boot from recovery boot,my screen still black too.
MrJyrks said:
If s-on you need to relock bootloader in fastbbot mode with 'fastboot oem lock' and then flash the ruu.
Click to expand...
Click to collapse
i'll try this thing
MrJyrks said:
I dont have time to find a ruu for you, so you better google for it yourself. Make sure to choose the appropriate ruu for your phone.
Click to expand...
Click to collapse
what make the rru different from me and the other? how to make sure is that ruu appropriate for my phone?
thanks for all your advice man, i'll try
paijo0708 said:
my phone now got black screen after installed chainfire 3d. using ics, root, hboot 1.50 unlock
Click to expand...
Click to collapse
Did you see this in the description of Chainfire 3D in the description on the Play Store:
!! For Froyo and Gingerbread ONLY. NOT COMPATIBLE with Honeycomb/Ice Cream Sandwich/Jelly Bean !!
Click to expand...
Click to collapse
Given that "NOT COMPATIBLE" is in caps, I'd suggest contacting the developer via his website or email in the Play Store listing and ask him what happens when it's run on ICS.
ramjet73
The RUU should be different on every carrier model and you must download the ICS RUU. For example, if you have a Sprint branded evo 3d, google for sprint evo 3d ics ruu. Also you should know the cdma version of evo 3d is alternatively named shooter and gsm version shooter u. I think it's relatively easy to find a ruu for your device. Please make sure your phones battery is fully charged before flashing and do not remove the usb cable before the process has completed. The ruu should be with .exe file extension. Just run the ruu and read the onscreen instructions.
---------- Post added at 01:21 PM ---------- Previous post was at 01:14 PM ----------
Oh and btw if you have got the wrong ruu the ruu should not flash. And please, dont ever flash CF3D on anything other than GB. And it is safer to have s off in my opinion but you should not do anything stupid if s off because it's easier to revive a s on device if bricked.
---------- Post added at 01:32 PM ---------- Previous post was at 01:21 PM ----------
Oh and as you are s on dont even bother flashing a new hboot as one has adviced.
---------- Post added at 01:40 PM ---------- Previous post was at 01:32 PM ----------
And if you didnt know a ruu will flash a hboot, rom and firmware. It must fix it. If it does not, there must be a hardware problem.
---------- Post added at 01:50 PM ---------- Previous post was at 01:40 PM ----------
And i dont get it why it didn't work. It works perfectly fine on sense 3.6 roms. At least it worked for me with the experimental driver.
---------- Post added at 01:55 PM ---------- Previous post was at 01:50 PM ----------
And use 4ext touch recovery, it seems to be more stable. To install just download app from play store and select install recovery from the app BUT you must be already rooted to flash the new recovery from the app. So to get s off back just do the htcdev method. fastboot flash recovery. Boot into recovery. Flash the root zip and then dl the app. The full version is a better option imho. It costs a little but its worth it.
Sounds like a hardware issue to me. How can CF3D affect hboot and recovery? It only touches the ROM.
@OP do you see a black light when you turn on the phone or your screen does not even light up.
I have installed CF3D on almost every ROM available for CDMA EVO 3D , just to mess around and it does not affect anything except the 3D graphics in games .They will get better or in worst case no 3D games at all only black screen but 2D HUD menu etc are visible.
And go s-off with juopunutbear. It is super easy with the correct timing. I watched a video to get the correct timing. And as far as i know s off should be required for jellybean roms.
---------- Post added at 02:09 PM ---------- Previous post was at 02:04 PM ----------
You just better flash a ruu. I dont think it is a hw issue if you had the screen functioning just before installing cf3d.
---------- Post added at 02:13 PM ---------- Previous post was at 02:09 PM ----------
If it doesnt work after flashing a ruu there is nothing we could do and you need to send it in for repair.
Nexus 7 (2013) black screen after installing chainfire 3D
paijo0708 said:
hy evevy body
I need help, plss
After install chainfire 3D on my nexus he is turn off,and i turn on but when is turn on,screen is black,and i can't fix.
I'm try wipe reset/factory but don't work,i connect with PC,but i can't see on PC my nexus,
How fix this problem
Plss help me
Thanks
Sry on my bad english
Click to expand...
Click to collapse

I brick my phone Can anyone help?

Yes, brick my phone, my htc evo 3D with Hboot 1.58, Unlocked Bootloader.. I tried to flash the CyanogenMod Gangnam Style, with 4ext recovery, and stuck on Boot Animation.. I accidentally format system in te recovery, there is a solution? Thanks!
If you are s off you need to do downgrade your boot loader. If you are s on you needed to do the write trick then downgrade your boot loader.
To get your phone in order now, Download a sense 3.6 rom and format everything but sd card in recovery and flash it, Make sure you read up on the requirements to flash next time, All roms have certain hboot's you have to be on.
---------- Post added at 04:33 AM ---------- Previous post was at 04:32 AM ----------
Your the same person I was working to unlock the bootloader this morning with, You've already messed up again
Can't_Live_Without_My_Evo said:
To get your phone in order now, Download a sense 3.6 rom and format everything but sd card in recovery and flash it, Make sure you read up on the requirements to flash next time, All roms have certain hboot's you have to be on.
---------- Post added at 04:33 AM ---------- Previous post was at 04:32 AM ----------
Your the same person I was working to unlock the bootloader this morning with, You've already messed up again
Click to expand...
Click to collapse
I was thinking more about getting cm to work and forgot the part about just getting the phone to work at all. Probably a better route :beer:
isaacsosa said:
Yes, brick my phone, my htc evo 3D with Hboot 1.58, Unlocked Bootloader.. I tried to flash the CyanogenMod Gangnam Style, with 4ext recovery, and stuck on Boot Animation.. I accidentally format system in te recovery, there is a solution? Thanks!
Click to expand...
Click to collapse
You can not install Cm 10 or 9 with Hboot 1.58..... you need to S-off and downgrade it to hboot 1.49 ....do the wire trick to downgrade it.....ATM you still can get to bootloader right?? so it is sofbrick and very easy to fix....download the correct RUU and flash it...With hboot 1.58 you can install rom with sense only...
Can't_Live_Without_My_Evo said:
To get your phone in order now, Download a sense 3.6 rom and format everything but sd card in recovery and flash it, Make sure you read up on the requirements to flash next time, All roms have certain hboot's you have to be on.
---------- Post added at 04:33 AM ---------- Previous post was at 04:32 AM ----------
Your the same person I was working to unlock the bootloader this morning with, You've already messed up again
Click to expand...
Click to collapse
You are my god, look i need the rom, im looking for the rom all the day but nothing :/ where i can get it? And, how i can flash back?
Thanks For all dude
isaacsosa said:
You are my god, look i need the rom, im looking for the rom all the day but nothing :/ where i can get it? And, how i can flash back?
Thanks For all dude
Click to expand...
Click to collapse
RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1 .09.00.0706_signed.exe
Search for that on google, Add the word download, Shouldn't be too hard.
Can't_Live_Without_My_Evo said:
RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1 .09.00.0706_signed.exe
Search for that on google, Add the word download, Shouldn't be too hard.
Click to expand...
Click to collapse
problem solved! i lock the bootloader and run the RUU, my phone is working now! Thanks! regards
isaacsosa said:
problem solved! i lock the bootloader and run the RUU, my phone is working now! Thanks! regards
Click to expand...
Click to collapse
Alright, You're allowed 8 thanks a day, I expect to see some of them lol.

[Q] Nearly Blank Screen

I unlocked my Rezound, installed AmonRa and rooted (confirmed). I wanted to install the 4.03.605.2 Global RUU and thought I needed to relock so that's what I did. I couldn't get the RUU (PH98IMG.zip) to flash from my external sd card so I relocked the bootloader. When the phone rebooted everything looked normal until it got to what should have been the home screen. Most of the screen is black. Along the top I can see 4GE, the signal bars, the battery icon and the time. When it fist starts this screen I see a white triangle with "Customization Setup" beside it. These soon disappear.
I have tried pulling the battery, but always go back to this mostly blank screen. The phone is S-on.
Any help out there?
Edit - I pulled the battery and booted into HBoot, then got into the recovery zip menu. I thought I was home free, but it says I am trying to flash a bad zip file.
i just flashed the global ruu, flash twice, remove it from the sd card and factory reset from hboot. that should fix u up.
Sent from my ADR6425LVW using Tapatalk 2
---------- Post added at 11:06 PM ---------- Previous post was at 11:02 PM ----------
if it doesn't work, grab a download from android police, and try the process again.
Sent from my ADR6425LVW using Tapatalk 2
mike7728 said:
i just flashed the global ruu, flash twice, remove it from the sd card and factory reset from hboot. that should fix u up.
Sent from my ADR6425LVW using Tapatalk 2
---------- Post added at 11:06 PM ---------- Previous post was at 11:02 PM ----------
if it doesn't work, grab a download from android police, and try the process again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks - I'll try it.
mike7728 said:
i just flashed the global ruu, flash twice, remove it from the sd card and factory reset from hboot. that should fix u up.
Sent from my ADR6425LVW using Tapatalk 2
---------- Post added at 11:06 PM ---------- Previous post was at 11:02 PM ----------
if it doesn't work, grab a download from android police, and try the process again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I downloaded the RUU from Android Police and went through the whole process again. I still have a home screen that is mostly blank. I did a nandroid restore in AmonRa and still have the same problem. I have Hassoon's All-In-One Toolkit v3.1, but everything requires USB debugging. With the screen blank (and no buttons functioning) I don't know of a way to enable USB debugging. Can anyone help?
settings-developer options-usb debugging...
S-OFF REZOUND
mike7728 said:
settings-developer options-usb debugging...
S-OFF REZOUND
Click to expand...
Click to collapse
How do I get there with a blank screen?

[Q] New to the device, I think I am fully bricked.. Am I?

OK so heres as much info as I have off memory.
I was @ relocked bootloader s-off hboot-2.09
had a way of flashing roms through twrp 2.4.4?
roms wouldn't flash
I tried and tried with windows now i am on ubuntu
I thought i was completely dead but the battery light flashed orange a bit then green
Oh i was using the jetjewel (http://forum.xda-developers.com/showthread.php?t=1940512)
to try to get back and it borked on waking device
so I waited to get the light back, just sitting on usb does it with a few power taps
ok trying to get it brickdetect to connect but it fails and I was playing with the power button with a green light and the bottom keys started to flash again, so i tried adb devices and it shows.
adb reboot=bootloader does nothing.
is there a way back to life for me?
I'll gladly share more as or if needed. Thanks 2 all
justlovejoy said:
OK so heres as much info as I have off memory.
I was @ relocked bootloader s-off hboot-2.09
had a way of flashing roms through twrp 2.4.4?
roms wouldn't flash
I tried and tried with windows now i am on ubuntu
I thought i was completely dead but the battery light flashed orange a bit then green
Oh i was using the jetjewel (http://forum.xda-developers.com/showthread.php?t=1940512)
to try to get back and it borked on waking device
so I waited to get the light back, just sitting on usb does it with a few power taps
ok trying to get it brickdetect to connect but it fails and I was playing with the power button with a green light and the bottom keys started to flash again, is there a way back to life for me? I'll gladly share more as or if needed. Thanks 2 all
Click to expand...
Click to collapse
This might be a no brainer question. Did you try holding the power button for 30 seconds then let go for 10 seconds and try turning it on? I had a similar issue but it wasn't near as bad as yours mine would freeze and just show black screen and flashed the buttons. All I did was restart the phone but it took awhile just to restart the phone like 5mins minimum
Also have you tried accessing bootloader
Sent from my EVO using XDA Premium 4 mobile app
lreyes said:
This might be a no brainer question. Did you try holding the power button for 30 seconds then let go for 10 seconds and try turning it on? I had a similar issue but it wasn't near as bad as yours mine would freeze and just show black screen and flashed the buttons. All I did was restart the phone but it took awhile just to restart the phone like 5mins minimum
Also have you tried accessing bootloader
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
OK tried bootloader when i had adb and it rebooted to a black screen again and no lights this time.
tried 30 then 10 seconds wait, nothing... I 'll keep trying 30 sec sets
justlovejoy said:
OK tried bootloader when i had adb and it rebooted to a black screen again and no lights this time.
tried 30 then 10 seconds wait, nothing... I 'll keep trying 30 sec sets
Click to expand...
Click to collapse
If you are already s-off why would you need to use that tool?
Sent from my HTCONE using xda app-developers app
What happens when you connect your phone to a computer?
---------- Post added at 11:24 PM ---------- Previous post was at 11:23 PM ----------
bigdaddy619 said:
If you are already s-off why would you need to use that tool?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
It's an unbricking tool.
bigdaddy619 said:
If you are already s-off why would you need to use that tool?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I couldn't get the roms to flash via recovery, they half flashed then the phone would reboot. I was looking to fix
FinZ28 said:
What happens when you connect your phone to a computer?
---------- Post added at 11:24 PM ---------- Previous post was at 11:23 PM ----------
It's an unbricking tool.
Click to expand...
Click to collapse
At first it does nothing, then after a little bit the battery charging light will come on but after I attempted to adb reboot bootloader it has been doing nothing when connected
Alright I took the thing apart pulled the battery now I got the amber light back on. any suggestions as to what I can do now? I am going to try adb just to see if it gets listed as a device or not
justlovejoy said:
Alright I took the thing apart pulled the battery now I got the amber light back on. any suggestions as to what I can do now? I am going to try adb just to see if it gets listed as a device or not
Click to expand...
Click to collapse
Are you 100% sure you are s-off? If you are s-on you have to flash the boot.img
and then the Rom click the guide in fins Sig and read his guide
Sent from my HTCONE using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
FinZ28 said:
What happens when you connect your phone to a computer?
---------- Post added at 11:24 PM ---------- Previous post was at 11:23 PM ----------
It's an unbricking tool.
Click to expand...
Click to collapse
That's not an unbricking tool that is the hboot downgrade tool
Sent from my HTCONE using xda app-developers app
bigdaddy619 said:
Are you 100% sure you are s-off? If you are s-on you have to flash the boot.img
and then the Rom click the guide in fins Sig and read his guide
Sent from my HTCONE using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
That's not an unbricking tool that is the hboot downgrade tool
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Whoops. Just glanced at it.......
Edit: It does provide unbricking under some circumstances
bigdaddy619 said:
Are you 100% sure you are s-off? If you are s-on you have to flash the boot.img
and then the Rom click the guide in fins Sig and read his guide
Sent from my HTCONE using xda app-developers app
---------- Post added at 10:55 PM ---------- Previous post was at 10:53 PM ----------
That's not an unbricking tool that is the hboot downgrade tool
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Will flashing even happen at this point? I am started to think its done for. but I just had adb so i dont wanna give up.
I'll look at that link in sig. I wasn't able to flash any roms and figured I needed to downgrade but it also had me thinking it was a fix
FinZ28 said:
Whoops. Just glanced at it.......
Click to expand...
Click to collapse
Great we looked at the same sign thats not there anymore, lol
You did say you're S-off, correct? If so I suggest running VipeRUU if you can get the phone to boot at least to the bootloader. It will put you back totally stock, unrooted & S-on. You can then re-root your phone.
Here is the link to VipeRUU. Run it from your computer:
http://forum.xda-developers.com/showthread.php?t=2197909
FinZ28 said:
You did say you're S-off, correct? If so I suggest running VipeRUU if you can get the phone to boot at least to the bootloader. It will put you back totally stock, unrooted & S-on. You can then re-root your phone.
Here is the link to VipeRUU. Run it from your computer:
http://forum.xda-developers.com/showthread.php?t=2197909
Click to expand...
Click to collapse
Thanks, I'll follow the link. I got adb back just from dabbling with the power but the lights dont come on. I'll keep trying!
EDIT:
No go for adb with windows. Guess I am phoneless for a while, LOL
If anyone has suggestions or a fix please don't hesitate, I'll try them all most likely, Thank You!
justlovejoy said:
Will flashing even happen at this point? I am started to think its done for. but I just had adb so i dont wanna give up.
I'll look at that link in sig. I wasn't able to flash any roms and figured I needed to downgrade but it also had me thinking it was a fix
Great we looked at the same sign thats not there anymore, lol
Click to expand...
Click to collapse
I'm at work right now but I'll be home in a 1/2 hr 45 minutes I'll pm you if you want
Sent from my HTCONE using xda app-developers app
bigdaddy619 said:
I'm at work right now but I'll be home in a 1/2 hr 45 minutes I'll pm you if you want
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
If you think you gotta trick or two i can try I am appreciative and all ears/eyes,.. Thank You!
So here is my take on this whole situation...
You are s-on(unless you used MoonShine or DirtyRacun to gain s-off) that's why none of the roms flashed
Messing with the downgrade tool most likely did some damage depending on how far you got(it's been a while since I have read the thread but IIRC this tool purposely bricks your phone to enable you to downgrade your hboot) to achieve s-off using LazyPanda for hboot 1.15 and 1.19 before FacePalm and DirtyRacun became available.
Send me a PM and we can try and figure it out
---------- Post added at 02:18 AM ---------- Previous post was at 02:10 AM ----------
justlovejoy said:
If you think you gotta trick or two i can try I am appreciative and all ears/eyes,.. Thank You!
Click to expand...
Click to collapse
Check PM
bigdaddy619 said:
So here is my take on this whole situation...
You are s-on(unless you used MoonShine or DirtyRacun to gain s-off) that's why none of the roms flashed
Messing with the downgrade tool most likely did some damage depending on how far you got(it's been a while since I have read the thread but IIRC this tool purposely bricks your phone to enable you to downgrade your hboot) to achieve s-off using LazyPanda for hboot 1.15 and 1.19 before FacePalm and DirtyRacun became available.
Send me a PM and we can try and figure it out
---------- Post added at 02:18 AM ---------- Previous post was at 02:10 AM ----------
Check PM
Click to expand...
Click to collapse
All that sounds like it makes sense now. I was already s-off and didnt need a downgrade. I was ultimately looking to be updated as an end result.
i think i need drivers for windows cause it tries to load a driver when connected but fails.
also what about hboot_recovery or something i can use to come back alive?
Still black screen, Thanks!
justlovejoy said:
i think i need drivers for windows cause it tries to load a driver when connected but fails.
also what about hboot_recovery or something i can use to come back alive?
Still black screen, Thanks!
Click to expand...
Click to collapse
I'll be home in about an hour I'll message you on hangout
Sent from my HTCONE using xda app-developers app
bigdaddy619 said:
I'll be home in about an hour I'll message you on hangout
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Thanks to you and all who helped or thought about it.
I got it back but now i will need another thread or just take it from here?
I need to get on the latest rom:
***RELOCKED***
S-OFF
CID-111111111
HBOOT: 2.09 0000
Radio-1.12.11.1119
bread kool aid butter
milk eggs cheese
Referrence to self: ignore for a sec: thanks
http://forum.xda-developers.com/showpost.php?p=32391466&postcount=5
http://forum.xda-developers.com/showpost.php?p=32761598&postcount=107
I used a program for windows that can change the cid and i thought it was doing me a favor i think and thats what started it all. since I am not bricked I havent seen any problems like that. thanks for helping guys.

Stuck on splash screen and cant get into recovery, any suggestions?

So I flashed [4.4.2] Sense 5.5 | KitKat | 4.19.401.8 rom and now my phone is stuck on the HTC screen and I cant get into recovery or bootloader by holding the power down button, any suggestions? I cant restart the phone by holding the button down.
I'm having the same issue after flashing that ROM. I can boot to the bootloader but when I try to get into recovery, TWRP will flash on the screen for a second and then reboot to the white DNA loading screen. It never gets past that.
I've flashed a couple of different recoveries and that didn't change anything. I also flashed the 1.54.0000 hboot and that didn't make a difference either.
---------- Post added at 01:04 PM ---------- Previous post was at 12:12 PM ----------
I managed to get my phone back to a working state. I followed the directions in:
http://forum.xda-developers.com/showpost.php?p=48498759&postcount=1
So at least I'm back to a functioning stock ROM and I can go from there.
rapidswing said:
I'm having the same issue after flashing that ROM. I can boot to the bootloader but when I try to get into recovery, TWRP will flash on the screen for a second and then reboot to the white DNA loading screen. It never gets past that.
I've flashed a couple of different recoveries and that didn't change anything. I also flashed the 1.54.0000 hboot and that didn't make a difference either.
---------- Post added at 01:04 PM ---------- Previous post was at 12:12 PM ----------
I managed to get my phone back to a working state. I followed the directions in:
http://forum.xda-developers.com/showpost.php?p=48498759&postcount=1
So at least I'm back to a functioning stock ROM and I can go from there.
Click to expand...
Click to collapse
How did you get it to boot? My phone is stuck on the HTC screen and I cant reboot it at all.
Sorry, I missed the part where you couldn't get into the bootloader. The bootloader was still working for me, so I was able to use fastboot.
So holding down the power button until the device shuts off then holding down power+vol down won't let you into the bootloader?
Sent from my Nexus 7 using XDA Premium HD app
.torrented said:
So holding down the power button until the device shuts off then holding down power+vol down won't let you into the bootloader?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
After holding the power button down for nearly 10 minutes it rebooted into bootloader but I cant get into recovery, It flashes the screen and yet I cant do anything. I flashed twrp and clockword betas but it just flashes and reboots
Get into the bootloader connect to fastboot and open a command prompt and type fastboot erase cache and then see if you can boot into recovery. That usually helps or that's what I did when I was faced with a similar issue.
Sent from my HTC Droid DNA using XDA Premium 4 mobile app
Jaggar345 said:
Get into the bootloader connect to fastboot and open a command prompt and type fastboot erase cache and then see if you can boot into recovery. That usually helps or that's what I did when I was faced with a similar issue.
Sent from my HTC Droid DNA using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It worked Thank you for your help!

Categories

Resources