Some time ago I was able to downgrade my S3 i9300 from Claro to 4.1.1. I did this in order to unlock the phone, and based on what I read here and on the web I needed 4.1.1 in order to get the menu that unlocks the cell. However after doing all the instructions and getting the cell rooted when I type the code *#197328640# I only get the same menu that was there when I had the 4.1.2 version on the cell, and of course it will not let me unlock the phone.
Is there any other way, like modifying some file or something like that, which could help unlock it? I am not afraid of having to use and editor to mess around with files. Any help will be appreciated.
abyss1957 said:
Some time ago I was able to downgrade my S3 i9300 from Claro to 4.1.1. I did this in order to unlock the phone, and based on what I read here and on the web I needed 4.1.1 in order to get the menu that unlocks the cell. However after doing all the instructions and getting the cell rooted when I type the code *#197328640# I only get the same menu that was there when I had the 4.1.2 version on the cell, and of course it will not let me unlock the phone.
Is there any other way, like modifying some file or something like that, which could help unlock it? I am not afraid of having to use and editor to mess around with files. Any help will be appreciated.
Click to expand...
Click to collapse
type the code, go to 1.debug screen, then 8.phone control, and then 7.network lock. i'm currently on 4.1.2 (with mg4 modem), and i can't get past 7.network lock (it says menu not exist). please let me know if on 4.1.1 you are able to get past 7.network lock and unlock the phone, cause i want to downgrade too on 4.1.1 for unlocking.
I get the same thing you are getting with 4.1.2, my stayed as it was on 4.1.2. The downgrade did not work.
abyss1957 said:
I get the same thing you are getting with 4.1.2, my stayed as it was on 4.1.2. The downgrade did not work.
Click to expand...
Click to collapse
well, i gave up and asked a guy with z3x box to unlock it for 11€ . now i can flash any rom i want and still be unlocked, as long as the modem is above mg4
Second try
Sorry you gave up I am still fighting with mine. I found this thread: http://forum.xda-developers.com/showthread.php?t=1737449
posted by Faryaab back in June 2012 and it's got to builds on the page that were supposed to be previous builds for 4.1.1. What I would like to know if someone is monitoring this is if those builds are still working so that I can download and experiment with them to see if I finally get the menu to unlock. Any help will be welcomed.
abyss1957 said:
Sorry you gave up I am still fighting with mine. I found this thread: http://forum.xda-developers.com/showthread.php?t=1737449
posted by Faryaab back in June 2012 and it's got to builds on the page that were supposed to be previous builds for 4.1.1. What I would like to know if someone is monitoring this is if those builds are still working so that I can download and experiment with them to see if I finally get the menu to unlock. Any help will be welcomed.
Click to expand...
Click to collapse
well, why dont you pay a few dollars and unlock it? i can put you through the guy that helped me. you need a decent pc and a good internet connection.
It seems that there is a way to unlock 4.3, use this tutorial that @.NetRolller 3D sent to me. Firstly, i think you need to update to 4.3, then follow the steps:
Hi!
Follow this tutorial:http://forum.xda-developers.com/showthread.php?t=1718665
Skip steps 9-12 (including the reboot step - important! Do NOT reboot mid-unlock, or you will have to start over!)
Instead, execute (at a Unix shell) the command "(cat nv_data.bin; echo -n Samsung_Android_RIL) | md5sum" on the NEW (modified) nv_data.bin to get the md5 value to use in step 14.
Should work with 4.3 or even KitKat when it's released, unless Samsung fundamentally changes the way SIM locking works on this phone. Samsung closed down the original Voodoo unlock in an update by removing the "correct" MD5 printout from the log error messages, but the signature scheme is unchanged, and trivially easy to overcome once you know the magic constant "Samsung_Android_RIL" appended to the end of nv_data.bin.
Click to expand...
Click to collapse
Please let me know if it works for you so we can make a sticky topic for people who want to unlock 4.3. :good:
Only one thing
darkmage93 said:
It seems that there is a way to unlock 4.3, use this tutorial that @.NetRolller 3D sent to me. Firstly, i think you need to update to 4.3, then follow the steps:
Please let me know if it works for you so we can make a sticky topic for people who want to unlock 4.3. :good:
Click to expand...
Click to collapse
Thanks darkmage93 for this link. Like the modified instructions say: "Instead, execute (at a Unix shell) the command "(cat nv_data.bin; echo -n Samsung_Android_RIL) | md5sum" on the NEW (modified) nv_data.bin to get the md5 value to use in step 14." This is the only thing I do not know how to do. I never worked with Unix, and if it is done with in the phone I still don't know. The only funny thing is when I looked at the nv_data.bin it already had the number changed to 00. I will look some more and may finally go with the paying option. :laugh:
abyss1957 said:
Thanks darkmage93 for this link. Like the modified instructions say: "Instead, execute (at a Unix shell) the command "(cat nv_data.bin; echo -n Samsung_Android_RIL) | md5sum" on the NEW (modified) nv_data.bin to get the md5 value to use in step 14." This is the only thing I do not know how to do. I never worked with Unix, and if it is done with in the phone I still don't know. The only funny thing is when I looked at the nv_data.bin it already had the number changed to 00. I will look some more and may finally go with the paying option. :laugh:
Click to expand...
Click to collapse
i don't know either how to use unix, but i could've find out how if i weren't unlocked already. i feel sad now that i didn't recieved NetRoller's PM earlier maybe this tutorial works... so do some researching and see what you can do.
Any progress for unlocking S3 on MG4+ Baseband?
Hi
I have just bought a 2nd hand Galaxy S3, it's looked and on Android 4.3
I just downgraded to 4.1.2 and tried GalaxySimUnlock.apk but no success ( it says that the current EFS is not supported)
I am wondering if there is any solution for unlocking i9300 with EFS v2 (mg4+)
Follow the tutorial posted here a few posts up. It should work.
Related
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
theothman said:
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
Click to expand...
Click to collapse
Ok that was pretty long and slightly confusing. But I think you lost your unlock yes? Have you tried Helroz's Galaxy S Unlock app from the market?
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
theothman said:
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
Click to expand...
Click to collapse
need root explorer to see efs files
could you please through a download link to root explorer
.....................
RE: Helroz
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
theothman said:
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
Click to expand...
Click to collapse
dont know anything about unlocking phones lol
can get busybox from market for free though i think, try that
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
theothman said:
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
Click to expand...
Click to collapse
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
kyle51 said:
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
Click to expand...
Click to collapse
No Way I think you chould replace your TW launcher with your TV guide and look for the cable guy movie
I have a problem here installed busybox and ran it to get the following;
Root not found!
the su binary was not found on your phone. this application will not work since your phone is not rooted
Then I press OK to get:
Status: looking for Busybox....
Your phone is not rooted
you used root explorer ?? so you must be rooted
i tried restoring app with titanium and it said i wasnt rooted so i rebooted and then it worked
try that and if not then try the super one click root method
Ready to donate and hit many thanks
Yes it's me again. still trying.
can anyone write happy ending to this endless story. but please consider I'm A NOOB not anything less than that. meaning I'm not familiar with most of terms and expressions you are using here.
However, if you are following this annoying story from beginning, I'm facing a dead end again, but i know there is great hope considering the following:
I have decided to start clean so I followed instruction in this thread (NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **).
I did every thing as it should be I believe, but I'm stock half way. Phone now flashed to stock T959UJFD (I'm glad now I can say that since I know what stock means) but shuts down as soon as I plug USB cable???????
I have update.zip file on internal SD not the 2GB external.
Also have the Rom of my choice zip file (Trigger 3.2) on internal SD.
Oh I also have SuperOneClick. And Odin 1.7
tried too many things like flashing without reparation or without reboot. tried also to flash some 2.3 Rom versions. and they do work well as I saw. Only one main problem I can't root the phone (meaning I can't see efs folder to unlock phone) which what I have to do since I locked it while trying to fix GPS, in case you are not following from the start.
I also have a very light nice functional stable Arabic Persian Rom. as a matter of fact, I do not know how, but with this version of Rom the phone was able to receive calls and sms. half locked
Thank you Kyle for trying and I believe I have to hit the thanks button for you
I'd really appreciate any help to end this rather entertaining story.
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
kyle51 said:
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
Click to expand...
Click to collapse
Come on man.... You are confusing me more than I do !!!!! I hit your thanks button and I did PM you. thanks for trying to help
I think we are all cornfused..... You might have a little more luck finding help in the I9000 forums, try posting your issue there. Good luck!
Error: “Not Registered on Network”
SGS III have JB 4.1.1 (I9300XXDLI8) ROM/baseband, rooted with CF-Root/TWRP.
I was running the above ROM with some sort of (probably) Soft unlocking done by a local mobile repair shop. Anyway, recently I decided to try out one of the custom ROM i.e. Omega 32.1 (JB 4.1.1) and before proceeding any further I made a full backup on SD card with TWRP.
I downloaded and flashed Omega 32.1, thinking that I can always go back if something doesn’t work out. Anyway, long and the short of it, when I restored my S3 through TWRP restore, I found out that it isn’t connecting with my mobile network i.e. Warid Tel with the error “Not Registered on Network”.
By the way I also happen to have the factory unlock code for this SGS3, but unfortunately all the USSD codes I've tried to enter it, doesn't work.
Although, I guess I can take it back and get it re-unlocked again, but that isn’t going to allow me to install custom roms.
Can anyone guide me how to fix this situation, any tips, help, will be highly appreciated.
Regards
Babur
Megneto said:
Error: “Not Registered on Network”
SGS III have JB 4.1.1 (I9300XXDLI8) ROM/baseband, rooted with CF-Root/TWRP.
I was running the above ROM with some sort of (probably) Soft unlocking done by a local mobile repair shop. Anyway, recently I decided to try out one of the custom ROM i.e. Omega 32.1 (JB 4.1.1) and before proceeding any further I made a full backup on SD card with TWRP.
I downloaded and flashed Omega 32.1, thinking that I can always go back if something doesn’t work out. Anyway, long and the short of it, when I restored my S3 through TWRP restore, I found out that it isn’t connecting with my mobile network i.e. Warid Tel with the error “Not Registered on Network”.
By the way I also happen to have the factory unlock code for this SGS3, but unfortunately all the USSD codes I've tried to enter it, doesn't work.
Although, I guess I can take it back and get it re-unlocked again, but that isn’t going to allow me to install custom roms.
Can anyone guide me how to fix this situation, any tips, help, will be highly appreciated.
Regards
Babur
Click to expand...
Click to collapse
Check your IMEI number.
Has it changed?
eggman89 said:
Check your IMEI number.
Has it changed?
Click to expand...
Click to collapse
No it hasn't changed.
The problem was the original "soft unlock"
Megneto said:
...
I was running the above ROM with some sort of (probably) Soft unlocking done by a local mobile repair shop. Anyway, recently I decided to try out one of the custom ROM i.e. Omega 32.1 (JB 4.1.1) and before proceeding any further I made a full backup on SD card with TWRP.
...
Click to expand...
Click to collapse
The problem was the original "soft unlock" - some of those (I believe even some early that were made by NSPro) are rather poor and are based on flashing a special modem binary. You will be able to fix it if you search around for the fix posted by Ariza (even if I believe something happened to the original post).
I am trying to find the fix by Ariza, but so far nothing has turned up. Also, if I search for the user "Ariza" it doesn't help either. Do you remember exact member alias?
Also, does that fix result in permanent resolution of the issue?
Or, is it better to get rid of this SGS3, and get factor unlocked version?
Thanks for your help and patience.
Edit:
I forgot to mention in OP that it correctly identifies the network when I check Status of the device.
Edit 2:
I was able to get hold of the guy who actually did the 'soft' unlocking in the first place, and he confirmed that it was done using NSPro (through Dongle) and is willing to do it again.
But the issue is, it will restrict me to JB 4.1.1 and I can't install any custom ROM.
Hmm ...
Megneto said:
I am trying to find the fix by Ariza, but so far nothing has turned up. Also, if I search for the user "Ariza" it doesn't help either. Do you remember exact member alias?
Also, does that fix result in permanent resolution of the issue?
Or, is it better to get rid of this SGS3, and get factor unlocked version?
Thanks for your help and patience.
Edit:
I forgot to mention in OP that it correctly identifies the network when I check Status of the device.
Edit 2:
I was able to get hold of the guy who actually did the 'soft' unlocking in the first place, and he confirmed that it was done using NSPro (through Dongle) and is willing to do it again.
But the issue is, it will restrict me to JB 4.1.1 and I can't install any custom ROM.
Click to expand...
Click to collapse
The thread was this:
http://forum.xda-developers.com/showthread.php?t=1918601
(in a post towards end I have some of the stuff from the forum where you had to register in order to get the files, and you might still recover some of those links - apparently those are patched versions of the corresponding stock modems which no longer check some of the information from nv_data.bin; you will need to add that modem after each major ROM change).
If you only plan to use 4.1.1 and not upgrade then NsPro should be OK, otherwise you either need a "subscription" to the services of that guy
Thank you for the help. I will go through that thread soon.
I've have also looked at this thread http://forum.xda-developers.com/showthread.php?t=1705650 by UpInTheAir. I have installed android SDK for Winx64 and successfully extracted modem.bin (as a test). I think I'll get the phone back to that guy, so he can patch the modem with NSPro again, once that is done, I'll extract the modem, repackage it so I can install it with CWM and test whether that can eventually help me in experimenting with other ROMs.
I will keep you posted on my progress.
Again thank you for your valued help.
Kind regards.
Babur
Having tried the method mentioned in my previous post, I finally gave up and took the phone for repair.
What transpired from thereon is interesting and confusing. As according to Mr. Repair 'serial number and IMEI' were repaired, nothing more. In fact I extracted the modem and compared it with the one I have, they are exactly same no patch applied.
However, both IMEI and serial number were showing correctly prior to the repair, and even after repair they are same (I double checked those with the original invoice/phone box etc.). So I am not sure how they were damaged when they were showing correctly.
Update:
I've sold the unit question, as I felt not to take any more risks with it, and bought an factory unlocked SGS3. Hopefully I will not face any problems with playing around with custom ROMs from hereon in.
Thank you and kind regards to all.
Babur
Hello eveyone
I am trying to root my legend. First, I tried the method on http://wiki.cyanogenmod.org/wiki/HTC_Legend:_Full_Update_Guide
It has 2 steps: downgrading and rooting.
I completed whole step 1 (downgrading) and went back to android 2.1 through the RUU.
Then I came at step 2, rooting the device. In step two of the rooting, it gives a link to the rooting files. This mediafire link is dead.
I went online searching for another link, and eventually i came at http://forum.xda-developers.com/showthread.php?t=1680584#3 wich guides to do the root through HTVdev. Before i actually went and tried this i needed a working phone for work so i did a full reset and updated trough android OTA update.
When I tried to unlock it through HTVdev, i runned into a problem.
Before i even could start, it asked me to update my rom with one of the given links. It says:
NOTE: If you do not find your ROM version in the table below, and your ROM version is newer, then your device does not require the RUU. Please bypass these steps and continue to the next page.
Click to expand...
Click to collapse
So my problem is, my version is not listed, but it is ALSO NOT newer than the versions listed below. The versions that are listed are:
3.14.161.1
3.14.163.1
3.15.1600.
3.15.178.3
3.15.405.3
3.15.708.2
3.15.709.3
3.15.720.3
3.18.751.2
3.19.1010.1
3.20.666.1
3.30.415.6
3.30.466.6
Click to expand...
Click to collapse
My problem is, i got version 3.15.405.7, very similar to the one listed, 3.15.405.3. First i skipped this part, and went ahead to follow the steps anyway. When i had to type fastboot oem get_identifier_token (step 8) in command prompt, it supposed to give me a large list of numbers.
Mine did nothing, so i knew i was wrong. I tried all of the steps a few times but with no effect. Then i thought, can't i just use the RUU of 3.15.405.3, maby then it will work?
But when i tried to run it, it didn't work since i dont have the right version to begin with.
So now what, can anybody help me? I realy want to unlock my device, it is so slow on stock 2.2 i'm getting crazy
I'll trie to follow every suggestion somone gives me but i cannot guarentee i can do everything since i'm a bit new to this stuff (although i know a lot about computers)
Thank you very much!
http://forum.xda-developers.com/showpost.php?p=34921904&
hope this helpful
Hi guys my girlfriend bought a LG Viper 4G LTE and she told me to root it to remove the sprint crap, so I was wondering if anyone has already done this and if yes, can they tell me how to s-off + root + custom recovery + and probably custom ROM.
If anyone can help, please I'll appreciate it. Since I searched here for that phone and is not even listed.
The phone is running android 4.0.4, is this ICS or Jelly bean?
I do not know how to get into fast boot boot loader cause I don't think it is POWER + VOL DOWN.
Thanks in advanced
Have a nice day
:what::what::what::what::what::what:
Sent from my Nexus 10 using Tapatalk HD
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Confirmed above!
jared_schaefer said:
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Click to expand...
Click to collapse
I can confirm that the above will work. I have a refurbished Viper from Sprint that I got because my 3G radio quit sending. It would receive great, but couldn't send any MMS or upload anything while on 3G. 4G was great, just no joy on 3G. Strangest thing. Anyway, got the phone replaced, and on the replacement was of course the dreaded unrooted ZVK. Gotta have my root back...
So I decided to try all this stuff out, and It worked.
To add a little further info, if you've got a relatively bare install of Windows, especially XP, you might need BOTH the VisualC++ Runtime Redistributables from 2010 (mentioned in the above thread) AND the one from 2008! If you don't have both, the LG FlashTool will not run. You can find them on Microsoft's site.
Once the flash tool has successfully downgraded your Viper, make sure you perform a factory reset, as indicated in the instructions for the FlashTool. Then use the "Activate" app to get your 3G/4G on. After that, set up your Google account under "Accounts and Sync" in "Settings".
I did the whole operation completely on a linux system, using a virtual machine running Windows XP for the FlashTool, then the bash script from here: http://forum.xda-developers.com/showpost.php?p=43530152&postcount=3253 with the v.31 rooting tool from the original post in that thread.
I had to edit the script in a very minor way, as was pointed out by its author, so it could find my adb command. I just placed the path to that command in the line that said:
Code:
for test_adb in "adb" "stuff/adb"
in the place of the first "adb", so I got:
Code:
for test_adb in "/home/user/android-sdk-linux/platform-tools/adb" "stuff/adb"
Make sure to replace "user" with your username, without the quotes.
Then I stuck the script in the same folder as the runme.bat file. After the script and root tool had done their work, my phone had rebooted a total of three times, and I had a perfectly functional Superuser app!
Huge thanks to LoveMyAndroid2010 in the post linked above. Great script - some love for linux!
Now to get RootKeeper and upgrade back to ZVK...
The aforementioned root method worked for me. Since I've rooted, I've compiled my findings into another thread. I haven't been able to unlock the bootloader yet, unfortunately.
how to upgrade LG Viper to Jelly bean or higher
After I root as per instructions, how can I upgrade the OS?
Please help. I'm a newbie and would appreciate any help you may offer. Haven't rooted any phone before.
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Once you select Option 1, you need to go back to the main windows to uncheck one box (F something) and then click start before it does the rooting. I missed it yesterday also and just keep waiting until I realized there was a step I didn't do.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Help!
I am having the same problem and my phone is sitting there with a large android icon and message reading "Downloading.. Do not turn off target!!" I am afraid to disconnect the phone from the USB. What should I do?
ThugosaurusRex said:
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Same here, Verizon Samsung g s4.
I followed the instructions: unchecked the F. reset box, and selected tar and clicked start. The "<OSM> All threads completed. (succeed 0 / failed 0) line showed up, and nothing else.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
whichonespink73 said:
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
Click to expand...
Click to collapse
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
dabs delicious said:
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
Click to expand...
Click to collapse
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
goldberg96 said:
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
Click to expand...
Click to collapse
You're talking about the popup window on your phone, right? Because It pops up for me too, and I click "confirm" each time, but to no avail
Does anyone else have any suggestions?
Question about using the 3 in 1 tool
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Super Noob
Hello everyone this is my very first post, I am looking to root my verizon s4 using the one tool kit i dont believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. i didnt want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
missjamie said:
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Click to expand...
Click to collapse
Root just allows you to hack the software on your phone, and the "unlock" refers to the bootloader. It does not unlock the phone for other carriers; this is done (from what I understand) by dialing a specific set of codes, generally provided to you by the original carrier of the phone if you have an account in good standing with them and you tell them you plan on travelling out of the country and need to use GSM. I have never needed to do this and as such only have a minor theoretical knowledge of the subject; I would appreciate it if somebody with more knowledge on this would confirm or deny my suspicion that you are better off trading the phone for an AT&T/T-Mobile one that actually was meant for GSM, or otherwise obtaining one.
JNava420 said:
Hello everyone this is my very first post, I am looking to root my Verizon s4 using the one tool kit i don't believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. I didn't want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock Verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
Click to expand...
Click to collapse
This is the original bootloader; not the stock firmware. You need to flash this after you successfully root, start the phone, start SuperSU, and update the SU binary.
The full stock firmware is rather large and available here:
http://forum.xda-developers.com/showthread.php?t=2289325
might not know as much as i thought
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
If you need assistance. Pm me. If I sm available ill help you.
JNava420 said:
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
Click to expand...
Click to collapse
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
OverkillSD said:
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
Click to expand...
Click to collapse
Well said. Only correction is the bootloader still remains locked. The recoveries included are loki patched. This bypasses the bootloader. All roms and kernels are loki patched so flashing them is safe. This is as close as we're gonna get to an unlocked bootloader for now.
Ah. I was under the impression the bootloader was unlocked. Thanks for the info.
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
dabs delicious said:
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
Click to expand...
Click to collapse
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
chrisxstyle1182 said:
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
Click to expand...
Click to collapse
Could be a couple of things first make sure your using the cable that came with your phone. Try switching usb ports. Alsi try rebooting your pc