I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
theothman said:
I bought GT-I9000M, Froyo, 4 days ago, brand new unlocked from store. I had a problem getting GPS to work. Searching for a fix on the web, I got inundated with all kind of info,. Not only on GPS fixes, but on comparing, updating, rooting, flashing, unlocking, APP's and other issues with my Galaxy s. So, after reading quite a bit, I decided to update or flash my phone to the latest (assuming that will solve GPS problem and all other issues). As a newbie to Android software which I was about to temper with, I selected androidadvices.com to guide me. I had read very carefully and I followed instructions meticulously to flash 2.3.4 XXJVP. but it did not work. then the phone did not start and I got the little mobile and pc with triangle in between sign. I still could get to download mode. I tried to repeat the process many times, but got same results. it halted after it started to load bin file. I consulted the so called expert at androidadvices if the I9000M differs from I9000 and if could that be the reason for what happened. HE did replied promptly "YES" and advised to take it to service center. I searched a little more on the web with other language and I found a tip about omitting pit file (using Odin). Tip worked fine and flashed to XXJVP. Please do not congratulate me yet. Now the phone starts showing I9000. I did not only lose M, but it is network locked. Getting back to the so called expert to ask him if it's a good idea to upgrade or rooting (as he described in his instructions) to 2.3.4 XXJVQ to solve the problem. Also I meant to publish what happened on his site to save other newbies from believing what he writes. And his answer was "YES" again. Now I know the trick how to use Odin by omitting pit file, I did flashed to XXJVQ. Unfortunately, the galaxy s still locked. By that time, with no search, I already know that XDA forum from their tens of Youtube videos and links on every galaxy s site for their unlocking techniques. I'm sorry I'm trying to make this story short, but I can't for I won't feel well if someone trying to help asks me "did you do that?". However I tried everything I could, using Generate Unlock and SIM less methods, on XDA to unlock, yet no luck. I logged on a site I do not recall the address and up loaded the nv_data.bin.orig and entered 8 digits twice for unlock and unfreeze. I got back the message "the file is smaller than it should". the file was 4MB. I paid for unlock code from unlock-freedom.com 2 days ago, which promised to send code within 12-24Hrs. Yes the store I bought it from is finally open today. I went there and he plugged it to laptop hooked to USB unlocking device. He tried many time and ending with the message unlocking successful on the unlocking app. Yes you got it, the Galaxy s I9000 previously I9000M still locked. On the bright side.I have Gingerbread 2.3.4 XXJPQ installed and if I dismiss unlocking screen I can log in my email. Any help from a real Expert!!!!! will the unlock code, if I receive it, solve the problem. will I ever have my new phone working again????
Click to expand...
Click to collapse
Ok that was pretty long and slightly confusing. But I think you lost your unlock yes? Have you tried Helroz's Galaxy S Unlock app from the market?
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
theothman said:
Thank you for replying, I'll be more than delighted to clear your confusion. The answer I coulld not try Helroz's for it's like some other methods require to gain access to efs folder. I don't have folder named efs. and the only file I found browsing internal sdcard whether through PC or Myfiles icon on mobile was nv_data.bin.org with another file called devicefriendlyname.txt with rest of regular folders like sovx and android. all under: /mnt/sdcard as it shows in the phone.
Click to expand...
Click to collapse
need root explorer to see efs files
could you please through a download link to root explorer
.....................
RE: Helroz
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
theothman said:
Ok I feel like we have real experts here. I installed Helroz smoothly and run it but I got the following message:
It's possible you have problem with busybox, please install it or fix it.
So, what's next great guy's? I guess I need a root explorer and busybox !!!
Click to expand...
Click to collapse
dont know anything about unlocking phones lol
can get busybox from market for free though i think, try that
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
theothman said:
Dear Kyle51
Thank you
I download the .apk file but I can't open it. what to do next?
Click to expand...
Click to collapse
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
kyle51 said:
should be able to go on to the app and pick what version to install, 1.17 or 1.18 i think show up
i tried changing TW launcher through sgs tools on simply honey but it said i didnt have busybox installed so i installed it and picked the newer version but still said i didnt have it, so dont know if i did something wrong
Click to expand...
Click to collapse
No Way I think you chould replace your TW launcher with your TV guide and look for the cable guy movie
I have a problem here installed busybox and ran it to get the following;
Root not found!
the su binary was not found on your phone. this application will not work since your phone is not rooted
Then I press OK to get:
Status: looking for Busybox....
Your phone is not rooted
you used root explorer ?? so you must be rooted
i tried restoring app with titanium and it said i wasnt rooted so i rebooted and then it worked
try that and if not then try the super one click root method
Ready to donate and hit many thanks
Yes it's me again. still trying.
can anyone write happy ending to this endless story. but please consider I'm A NOOB not anything less than that. meaning I'm not familiar with most of terms and expressions you are using here.
However, if you are following this annoying story from beginning, I'm facing a dead end again, but i know there is great hope considering the following:
I have decided to start clean so I followed instruction in this thread (NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER ** 04/28/11 W/ Videos **).
I did every thing as it should be I believe, but I'm stock half way. Phone now flashed to stock T959UJFD (I'm glad now I can say that since I know what stock means) but shuts down as soon as I plug USB cable???????
I have update.zip file on internal SD not the 2GB external.
Also have the Rom of my choice zip file (Trigger 3.2) on internal SD.
Oh I also have SuperOneClick. And Odin 1.7
tried too many things like flashing without reparation or without reboot. tried also to flash some 2.3 Rom versions. and they do work well as I saw. Only one main problem I can't root the phone (meaning I can't see efs folder to unlock phone) which what I have to do since I locked it while trying to fix GPS, in case you are not following from the start.
I also have a very light nice functional stable Arabic Persian Rom. as a matter of fact, I do not know how, but with this version of Rom the phone was able to receive calls and sms. half locked
Thank you Kyle for trying and I believe I have to hit the thanks button for you
I'd really appreciate any help to end this rather entertaining story.
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
kyle51 said:
dont know why it goes off when usb gets plugged in :s
you cant root rooting means you can flash custom roms which you've done ?? so you must be rooted ??
and you dont need odin or super one click on your sd (if thats what you meant)
but trying to fix gps locked it as in only open to 1 network/carrier ?? (whatever it's called where you are)
Click to expand...
Click to collapse
Come on man.... You are confusing me more than I do !!!!! I hit your thanks button and I did PM you. thanks for trying to help
I think we are all cornfused..... You might have a little more luck finding help in the I9000 forums, try posting your issue there. Good luck!
Related
Hi,
I have bought two phones from craiglist.
1. Captivate, and
2. Vibrant.
Both are locked. I did read forums before buying, and to me it looked i will be able to unlock. After 4 days of experiments and trails. I feel stuck, exhausted and also screwed.
Mine 1st worry is to get both of them unlocked, and 2nd is to get them rooted.
When i bought the Vibrant, it was already rooted on 2.1 eclair. I tried sgslock.apk (latest) to unlock, but no codes found using both root and unroot option. I read in one thread that sgsUnlock works better with froyo.
I followed the instructions at to install froyo on both the phones.
1. w w w . pathikshah. com/blog/install-android-2-2-froyo-galaxy-s
This froyo build is with prefix I9000XXJP2.
The installation process is straight forward, run Odin select all the files PDA, Modem and CSC. Select the other downloaded PIT file (link on the same page).
Press the Start Button. Wait for the device to reboot into froyo.
What it did.
This installed froyo, the froyo looked stock
Ques 1 - What does stock mean? straight from the google, without bloatware.
Tired to do lot of things to get the vibrant and captivate rooted. But nothing worked.
The funny observation is it reverses the functionality of Vol+ and Vol- keys and makes the Power Button function-less, during the recovery screen. So, after the reboot, first i have to use vol+ (up) button to scroll down, after that to select i press power button which doesnot respond to any selections. So none of root patched reboots were installed. It hasppens for both the phones.
Ques 2 - Does it mean, the build i am using I9000XXJP2 is bad. Another observation it show Recovery 3e, whereas on all the forums i see talk about 2e.
Ques 3 - Do i have to get to Recovery 2e. If yes, then how?
I tried sgsUnlock on both the phones. Latest version and the older version.
So, the SgsUnlock cudnt have any root privilege to do a actual "root generate code".
Then I tried various one click solutions,
a. Generate windows unlock
b. super one click
c. Various version of Generate windows unlock
d. adb methond, but i am not sure if i am doing it right.
The SuperClickOne unlocked the captivate, i am really glad but terribly tired with vibrant. SuperClickOne didnot root the captivate. Its "Unlock Captivate" tab did the job.
Ques 4a - The unlock code now I have for captivate, will it remain the same for every new android I install later. I mean will it bother me like Iphones, after every update my baseband will be locked, and then all the trauma again.
Ques 4b - Or is it unlocked forever. Even if it is somehow locked again, the same code with do the unlocking.
Ques 4c - SuperOneClick -- Does not have a " vibrant unlock" tab like "captivate unlock" tab. Is their any other application which does a vibrant specific unlock, or a sure-shot vibrant unlock?
Please advice, how to
i - unlock vibrant
ii - install right froyo on vibrant, and root it.
iii - install right froyo on captivate, and root it.
iv - i am even open to install modfied froyos, if i am able to do the above 3.
Thanks a lot in anticipation.
May I make a suggestion, however I don't know if it will solve your problem.
I think after the JI6 OTA, the unlock app no longer worked.
Would it be posssible to use ODIN, to flash your phone back to stock JFD, then run the unlock app, and get your unlock code! Then you can flash your phone to the most recent update after getting the code.
Maybe it will work? Trick the system by downgrading!
Yes that is what i am also trying to do. I am looking at the safest bet, i mean install eclair or froyo which is unlockable. Get the unlock codes for vibrant. And later install the latest build. Can please some one post the link for the stock build.
i am looking at "http :// forum.xda-developers.com/showthread.php?t=734475".
any other recommendations. Thanks.
vibrant rooted on 2.1 with baseband T959UVJFD
copied the nv_data file to desktop, found SSNV. Totally lost to decipher data from it. Can anyone help.
any help...?
SamsungVibrant said:
May I make a suggestion, however I don't know if it will solve your problem.
I think after the JI6 OTA, the unlock app no longer worked.
Would it be posssible to use ODIN, to flash your phone back to stock JFD, then run the unlock app, and get your unlock code! Then you can flash your phone to the most recent update after getting the code.
Maybe it will work? Trick the system by downgrading!
Click to expand...
Click to collapse
I just did that, and the unlock does not work. I used the file at h**p://forum.xda-developers.com/showthread.php?t=734475
Is their a reason the nv_data file might corrupted.?
I believe any phone with JI6 or later will not be able to use sgsunlock. Even if you go back to stock JFD. There is a work around though. If you go to the Bible in the developers section there is a link to where helroz was able to get around this. I think the link says JI6 SimUnlock Fix or something like that.
Sent from my SGH-T959 using XDA App
Another suggestion. Are you a T-Mobile customer? T-Mobile customers, of at least 40 days, get free unlock codes. They might even give you an unlock code for the captivate if you intend on using it on their network. (a rep once told me they can get any unock code for their customers, but for non-tmobile phones the process just takes longer) maybe the rep was wrong...but its worth it for the captivate also.
That is your best bet, and it is free.
Got the unlock code from T-mobile. Nothing else worked. Thanks.
help
hello, i have recently bough a samsung galaxy s 190000t of ebay. The first week there was no problems with the phone at all but now it will not make or recieve any calls or messages but everything else works fine?. the first week no problems, there still is reception bars on the phone and the phone is not sim locked. what do you think is wrong and what can i do to fix it. maybe the phone was a stolen one an the origanl owner bloked or something like that ? it is there any chance yous could help me out?
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
This shows what happens when I try reading the phone on KDZ... also a little part showing that I got my device to be recognized by windows...
also disabled the LGE modem on device manager, read that if I don't it'll get bricked.
Well it won't let me link the image so... just paste the name together.
www
novasite.com.br
/1.jpg
1. Find a suitable v2.2 stock ROM for flashing (link)
2. Use KDZ to flash it (I am not aware of another tool capable of doing that). Try doing that on a PC running Windows XP (important - that's where you're stuck now and I guess you're using Windows 7).
3. Root your phone - search for "z4root" on Market, install it.
4. Install Custom recovery, which will replace your current (stock) recovery mode (link - you may need to create an account on another forum in order to download).
5. Using Custom recovery you can now install any custom ROM and create nandroid backups to restore your phone to a certain (working) state.
You will have to use KDZ again if you ever want to flash a stock ROM, also losing the custom recovery. But you will have no reason to do that, except if you need to take your phone to some warranty repairs.
Good luck!
NEW PROBLEM: About step 1... i finally found a way to get my country's rom, but... it's.. the same thats on my device right now, it says V10a_02 and thats the same on my phone (the kdz read phone tells me that) so... won't I just be flashing the same 2.2.1 again?
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500H/ABRABK/V10A_02/V10A_02.kdz <---- the rom the topic tells me to get.
How do I know what version of android is in that rom? and if i can't, can you link me to a rom that does?
I found one from another country that the guy said is 2.2... but... will it work if i flash that one? does it HAVE to be for my country? also my model is p500h (the h) is it different from the p500 (different as in flashing p500 without h roms on it will kill it?)
As for flashing it...
I think maybe a computer with win xp will do the trick for kdz.
i've found this post today:
http://forum.xda-developers.com/showthread.php?t=944881
is it better to use that than kdz? theres no replies on topic saying "hey it worked" so i'm a little worried, but apart from a few errors it seems to work on my win 7....
i guess the reply would be "i only know kdz, do it with kdz" but i thought i might ask...
Indeed, I have not tried that method and therefore I can't recommend it. At least KDZ is successfully tested. If you are patient enough to wait for some replies either here or in that topic, you may find out if it works. I would recommend it only if you have no other choice, like if you're unable to try KDZ on an XP machine.
In the mean time, I remembered that a newer version of Custom recovery is available (v1.2) - here. But you still need to download a file and read the tutorial from that other forum I mentioned in the previous post.
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
edumazieri said:
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
Click to expand...
Click to collapse
First backup your data, then download a factory ROM, it doesn't matter which version u download, what matters is the version. Make sure that it's 2.2 and not 2.2.1 or 2.2.2. Follow all the below steps without skippin any, no matter how simple or stupid they are.
Link for shipped ROM - http://forum.xda-developers.com/showthread.php?t=865479
Now download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Now Root it via Z4root - http://forum.xda-developers.com/showthread.php?t=833953
Then install custom recovery - http://forum.xda-developers.com/showthread.php?t=844483
Then download n flash any ROM of your choice, I wud sugget install Void or LOL.
Edit :- By the time I replied, many have already replied. Anyways you can check my reply too :-D
Mithun.
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
edumazieri said:
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
Click to expand...
Click to collapse
Yes.... you can choose any country. I tried the Australian version. Use the below one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AAUSBK/V10a_00/V10A_00.kdz
edumazieri said:
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
Click to expand...
Click to collapse
As far as my knowledge goes, the LG P500h you have is the same phone as the P500, only branded for Telus. The hardware should be identical, therefore you may use any ROM designed for the P500 family.
The only thing you may miss if you install a ROM not customized for a Brasil (or South America) network operator is the internet acces point name, thus rendering your phone unable to acces the internet trough its data service connection, but only trough WiFi. Nevertheless, the phone's APN can be configured manually, all you need are the correct settings from your mobile operator and you're good to go.
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
edumazieri said:
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
Glad that it worked Install the Amon_RA's recovery!!! Many ROM's for OO won't support clock work I suppose. Amon RA's recovery is neat, I've been using that from the time I had an HTC tattoo.
For your Custom Recovery.... http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
edumazieri said:
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
You can do anything you need with ThunderG. Now that version 1.2 supports backup and restore of ext4 partitons (a feature you don't need if you don't plan on installing a custom ROM... but you will, eventually ), it is complete.
Moreover, in ClockworkMod's first topic says: "This recovery will not allow you to flash every ZIP file". ThunderG does, if you choose to allow flashing of unsigned zip files. Sometimes this is useful.
Peeeeeerfect
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Simple as that =D
Although there are some criteria with the sd card or you'll get unmounting problems.
Use a class 4 or higher card
format with fat32
I've never officially tried this method but its apparently supposed to help
allocation unit size: 64kb when you're formatting
edumazieri said:
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Click to expand...
Click to collapse
So, how does it goes?!
I´m brazilian too, got a brand new LG Optimus One from ViVo, and a want to know if you´re having any troubles with conections, calls, internet, 3G etc.
OK, id did the flash
I´m afraid that if flash any custom rom, it will break or cause any misfuncition of the 3g service.
Any idea?!
== Updated
Ok, I´ve flashd it with KDZ and the log show´s thats all ok
"14:34:45 : ===FINISHED=== "
BUt its taking like FOREVER to start... almost 30min on android screen. Is this normal?! Should i restart the phone?!
leave it some more time , try shaking it ...
shake trick sometimes helps
Help please..
I did as instructed in the step to step procedures. kdz posted finished but my phone is still at the yellow screen..i did shaking but nothing happens..Is this normal?..SHould i wait..
Here's my problem, I bought a Samsung Galaxy S2 I9100 from a friend like 4 months ago, which means I don't really know if it's a factory unlocked device or international unlocked device or unlocked using some kind of methods that I don't really know anything about them...
Anyway, I rooted it probably a month after buying it, and I installed two or three custom roms her and there. (I think I installed the X-TremE CM10 1.5 Pure, 1.6 Pure and others roms from other developpers...)
Finally I found the perfect custom rom that I used all the time until now, it was the SuperNexus rom from Faryaab.
Everything went fine until today, I decided to try a new rom, the Omega v16.2 from ::indie:: (I can't post the link sorry but it's very easy to find).
Factory/Data Wipe, Wiped the cache and the Dalvik Cache and installed from zip, everything went fine.
The problem here is that all this time I was using my default modem which I found with the phone, the XXLPX (not a quite loved and famous modem from what I've seen), but the rom I installed was "equiped" with the XXLSJ modem (I don't know if we can say so, i'm not really a professional), so my Baseband version actually changer to I9100XXLS6 (it was I9100XXLPX as said above) and know I have in my hands a SIM Locked device...
I tried the Galaxy S2 SIM Unlock application from Chainfire and the Galaxy_S Unlock from HELROZ and none of the two have worked.
I switched back to the SuperNexus rom, redownloaded the XXLPX modem and reflashed it through the CWM Recovery menu and my phone is still SIM Locked.
So my question here is, does the fact that the rom have changed my modem version locked my phone, or did I do something wrong when installing ?
And is there anyway I could reunlock my phone using any method (probably not, but I ask anyway, who knows) ?
Thanks in advance.
You tried those apps with busybox right? sometimes you need to install another busybox installer version to getting it unlocked.
Have you tried Galaxy S2 SIM Unlock?
if you have a tendency to switch ROMs too often, you might want an app that keep that locking nightmare away.
if all apps fail, look into what these guys did (do not replace the bin file posted there, it's a diffrent method):
http://forum.xda-developers.com/showthread.php?p=35934314#post35934314
Thanks alot for this ! it's gonna be really useful next time i'm gonna have a problem like that ! But I've already reunlocked it so I can't really try :c. I took it to some "specialist" guy that did it. I still don't know what's the method he used though...
As I've said I'm not a professional my self so it would be kind from you if you explain me two or three things.
First, what do you mean with busybox ? I'm not quite sure if the rom I was using (the Omega) while testing the two unlocking applications listed above was "equiped" with that.
Second thing, you didn't really answered my question which I'm gonna reformulate now:
Can I actually change the version of the Baseband of my phone ? If yes, do I lose the SIM Unlock ? And if I can change the Baseband version and lose the actual SIM Unlock, can I reunlock it and keep that version of the Baseband or do I need to get back to the old version by reflashing it, then reunlock it ?
And finally, the efs folder that I need to backup every time before flashing a new rom (I didn't knew that), what does he contain ? From what I've seen he contains the nv_data.bin file which I think contains the unlock, and that folder also contains some IMEI informations and other stuff. If I actually back it up before installing a new rom, and if that rom changes the baseband version which will probably lock my phone, is it safe to put back that backed up efs folder while keeping the same rom and the same baseband version that came with it ? Does it reunlock the phone ? And do I just put it back using a root explorer and just overwrite it the existing ones ?
Yeah I know, too many questions a man can handle, but I really need to be informed of all those things so I can be aware of what I'm doing.
And thanks in advance for your patience.
Best regards.
fury1337 said:
Thanks alot for this ! it's gonna be really useful next time i'm gonna have a problem like that ! But I've already reunlocked it so I can't really try :c. I took it to some "specialist" guy that did it. I still don't know what's the method he used though...
As I've said I'm not a professional my self so it would be kind from you if you explain me two or three things.
First, what do you mean with busybox ? I'm not quite sure if the rom I was using (the Omega) while testing the two unlocking applications listed above was "equiped" with that.
Second thing, you didn't really answered my question which I'm gonna reformulate now:
Can I actually change the version of the Baseband of my phone ? If yes, do I lose the SIM Unlock ? And if I can change the Baseband version and lose the actual SIM Unlock, can I reunlock it and keep that version of the Baseband or do I need to get back to the old version by reflashing it, then reunlock it ?
And finally, the efs folder that I need to backup every time before flashing a new rom (I didn't knew that), what does he contain ? From what I've seen he contains the nv_data.bin file which I think contains the unlock, and that folder also contains some IMEI informations and other stuff. If I actually back it up before installing a new rom, and if that rom changes the baseband version which will probably lock my phone, is it safe to put back that backed up efs folder while keeping the same rom and the same baseband version that came with it ? Does it reunlock the phone ? And do I just put it back using a root explorer and just overwrite it the existing ones ?
Yeah I know, too many questions a man can handle, but I really need to be informed of all those things so I can be aware of what I'm doing.
And thanks in advance for your patience.
Best regards.
Click to expand...
Click to collapse
okay, here we go,
1) There are a lot o people that become some sort of experts on devices thanks to this forums. It takes houndreds - if not thousends - of hours reading posts and executing some things you learn here.
2) busybox is an app. It's Linux based and to tell you the truth, not too many people know exactely what it does, It's very difficult to pinpoint every single thing that this "busy" app performs; Just think of it like a an app that does a lot of things for other app(s) to perform better or to perform at all. You can download it directly from Playstore; bare in mind that sometimes the unlocking app will work with different versions of busybox, so you'll have to try and see. I'm now using "Busybox Free 8.9.7" & "Busybox Installer 4.1"
3) You can always change your MODEM, Baseband it's some sort of radio version that cell phones use to get service, some basbands work on many countries, regions, some don't, still...you always can "odin it" and change the modem (Always read about flashing modem with odin before you do anything).
4) Some ROMs will re-Networkl-lock your device, hell, happened to me every time I went up from Gingerbread - Ice Cream Sandwich - Jelly Bean Leak. The only thing you have to do is get the right tools so you can always unlock it without the drama.
These unlocking apps let you LOCK & UNCLOCK as pleased.
5) the EFS folder indeed contents your network information, IMEI and stuff, it's always good to back it up as it is an important folder for your device to function. I use HC-kTool to back it up whenever i need to.
There is an unlocking method that makes you modify the .bin file. Never done it before but some guys here do it all the time and actually works.
Some other member could enlighten you in this matter; makes sense that flashing a new modem would lock your phone but i wouldn's know. Still, as I've got all these wonderfull apps to unlock....I really don't give a damn
Open for corrections, I've just used common sense.
gastonw said:
okay, here we go,
1) There are a lot o people that become some sort of experts on devices thanks to this forums. It takes houndreds - if not thousends - of hours reading posts and executing some things you learn here.
2) busybox is an app. It's Linux based and to tell you the truth, not too many people know exactely what it does, It's very difficult to pinpoint every single thing that this "busy" app performs; Just think of it like a an app that does a lot of things for other app(s) to perform better or to perform at all. You can download it directly from Playstore; bare in mind that sometimes the unlocking app will work with different versions of busybox, so you'll have to try and see. I'm now using "Busybox Free 8.9.7" & "Busybox Installer 4.1"
3) You can always change your MODEM, Baseband it's some sort of radio version that cell phones use to get service, some basbands work on many countries, regions, some don't, still...you always can "odin it" and change the modem (Always read about flashing modem with odin before you do anything).
4) Some ROMs will re-Networkl-lock your device, hell, happened to me every time I went up from Gingerbread - Ice Cream Sandwich - Jelly Bean Leak. The only thing you have to do is get the right tools so you can always unlock it without the drama.
These unlocking apps let you LOCK & UNCLOCK as pleased.
5) the EFS folder indeed contents your network information, IMEI and stuff, it's always good to back it up as it is an important folder for your device to function. I use HC-kTool to back it up whenever i need to.
There is an unlocking method that makes you modify the .bin file. Never done it before but some guys here do it all the time and actually works.
Some other member could enlighten you in this matter; makes sense that flashing a new modem would lock your phone but i wouldn's know. Still, as I've got all these wonderfull apps to unlock....I really don't give a damn
Open for corrections, I've just used common sense.
Click to expand...
Click to collapse
So what are the tools I need? I already tried 2 different sim unlocking apps on the play store and I got someone to try changing the upload ur nv_data.bin and it still doesn't unlock
RacecarBMW said:
So what are the tools I need? I already tried 2 different sim unlocking apps on the play store and I got someone to try changing the upload ur nv_data.bin and it still doesn't unlock
Click to expand...
Click to collapse
galaxysim unlock
galaxy s unlock
galaxy s2 sim unlock
Read First Threads:
http://forum.xda-developers.com/showthread.php?t=1360174
http://forum.xda-developers.com/showthread.php?t=1092451
http://forum.xda-developers.com/showthread.php?t=1289395
http://forum.xda-developers.com/showthread.php?t=2070375
http://forum.xda-developers.com/showthread.php?t=2069517
and don't forget busybox!
gastonw said:
okay, here we go,
1) There are a lot o people that become some sort of experts on devices thanks to this forums. It takes houndreds - if not thousends - of hours reading posts and executing some things you learn here.
2) busybox is an app. It's Linux based and to tell you the truth, not too many people know exactely what it does, It's very difficult to pinpoint every single thing that this "busy" app performs; Just think of it like a an app that does a lot of things for other app(s) to perform better or to perform at all. You can download it directly from Playstore; bare in mind that sometimes the unlocking app will work with different versions of busybox, so you'll have to try and see. I'm now using "Busybox Free 8.9.7" & "Busybox Installer 4.1"
3) You can always change your MODEM, Baseband it's some sort of radio version that cell phones use to get service, some basbands work on many countries, regions, some don't, still...you always can "odin it" and change the modem (Always read about flashing modem with odin before you do anything).
4) Some ROMs will re-Networkl-lock your device, hell, happened to me every time I went up from Gingerbread - Ice Cream Sandwich - Jelly Bean Leak. The only thing you have to do is get the right tools so you can always unlock it without the drama.
These unlocking apps let you LOCK & UNCLOCK as pleased.
5) the EFS folder indeed contents your network information, IMEI and stuff, it's always good to back it up as it is an important folder for your device to function. I use HC-kTool to back it up whenever i need to.
There is an unlocking method that makes you modify the .bin file. Never done it before but some guys here do it all the time and actually works.
Some other member could enlighten you in this matter; makes sense that flashing a new modem would lock your phone but i wouldn's know. Still, as I've got all these wonderfull apps to unlock....I really don't give a damn
Open for corrections, I've just used common sense.
Click to expand...
Click to collapse
Thanks alot for those "enligthments".
I don't know which method the guy I brough my phone to used to unlock it, but I reflashed the Omega custom rom yesterday and it actually didn't relock my phone ! But from now on I'm gonna be alot more cautious when flashing a new custom rom. Recovery backup from the CWM recovery mode, efs backup and maybe some Titanium backup too, even though I prefere having a clean "new phone" and install the apps by myself rather than referring to a backup. Yeah I know it's stupid but I like it that way.
Anyway, thanks again for your help and your patience, much appreciated c: .
Cheers.
salut.
btw, you might wanna add mobile odin yo that list. Hell of an app.
from sii xda-ded
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Once you select Option 1, you need to go back to the main windows to uncheck one box (F something) and then click start before it does the rooting. I missed it yesterday also and just keep waiting until I realized there was a step I didn't do.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Help!
I am having the same problem and my phone is sitting there with a large android icon and message reading "Downloading.. Do not turn off target!!" I am afraid to disconnect the phone from the USB. What should I do?
ThugosaurusRex said:
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Same here, Verizon Samsung g s4.
I followed the instructions: unchecked the F. reset box, and selected tar and clicked start. The "<OSM> All threads completed. (succeed 0 / failed 0) line showed up, and nothing else.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
whichonespink73 said:
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
Click to expand...
Click to collapse
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
dabs delicious said:
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
Click to expand...
Click to collapse
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
goldberg96 said:
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
Click to expand...
Click to collapse
You're talking about the popup window on your phone, right? Because It pops up for me too, and I click "confirm" each time, but to no avail
Does anyone else have any suggestions?
Question about using the 3 in 1 tool
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Super Noob
Hello everyone this is my very first post, I am looking to root my verizon s4 using the one tool kit i dont believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. i didnt want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
missjamie said:
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Click to expand...
Click to collapse
Root just allows you to hack the software on your phone, and the "unlock" refers to the bootloader. It does not unlock the phone for other carriers; this is done (from what I understand) by dialing a specific set of codes, generally provided to you by the original carrier of the phone if you have an account in good standing with them and you tell them you plan on travelling out of the country and need to use GSM. I have never needed to do this and as such only have a minor theoretical knowledge of the subject; I would appreciate it if somebody with more knowledge on this would confirm or deny my suspicion that you are better off trading the phone for an AT&T/T-Mobile one that actually was meant for GSM, or otherwise obtaining one.
JNava420 said:
Hello everyone this is my very first post, I am looking to root my Verizon s4 using the one tool kit i don't believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. I didn't want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock Verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
Click to expand...
Click to collapse
This is the original bootloader; not the stock firmware. You need to flash this after you successfully root, start the phone, start SuperSU, and update the SU binary.
The full stock firmware is rather large and available here:
http://forum.xda-developers.com/showthread.php?t=2289325
might not know as much as i thought
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
If you need assistance. Pm me. If I sm available ill help you.
JNava420 said:
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
Click to expand...
Click to collapse
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
OverkillSD said:
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
Click to expand...
Click to collapse
Well said. Only correction is the bootloader still remains locked. The recoveries included are loki patched. This bypasses the bootloader. All roms and kernels are loki patched so flashing them is safe. This is as close as we're gonna get to an unlocked bootloader for now.
Ah. I was under the impression the bootloader was unlocked. Thanks for the info.
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
dabs delicious said:
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
Click to expand...
Click to collapse
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
chrisxstyle1182 said:
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
Click to expand...
Click to collapse
Could be a couple of things first make sure your using the cable that came with your phone. Try switching usb ports. Alsi try rebooting your pc
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex,
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app