Hello,
just received my Omate I'm having a hard time finding the volume controls for such as music and videos, I guys all media volume controls. Can someone please help with step by step directions. Pictures would be as well if not too much trouble. Also is there any way to get the google playstore installed without rooting?
Thanks
foody24 said:
Hello,
just received my Omate I'm having a hard time finding the volume controls for such as music and videos, I guys all media volume controls. Can someone please help with step by step directions. Pictures would be as well if not too much trouble. Also is there any way to get the google playstore installed without rooting?
Thanks
Click to expand...
Click to collapse
If I remember correctly volume adjustments are in the unofficial but far more complete users manual with is listed in the [INFO] Everything Umeox x201 (TrueSmart, AW-414/420, AX-3, XTouch, etc..) thread.
At this time, not rooting is a very bad idea. In case you missed it the reasons can be founf in the [PATCH] Root+Enhanced Security (Umeox x201, AW-414/420, TrueSmart, etc..) thread.
How to get Play Store is listed in the Common Issues and Fixes & MISC section of the [INFO] Everything Umeox x201 (TrueSmart, AW-414/420, AX-3, XTouch, etc..) thread.
Until the settings menu is fixed volume control plus is the best way to go.
Sent from my Galaxy Nexus using Tapatalk 2
More help
Lokifish, I followed your advice and rooted my TS and surprisingly it was easy. I also downloaded the google App Store. My question is that the Omate Truesmart Companion app is gone and is not even in the ostore so I cannot use it. I already signed up with G+ community and signed up as tester and downloaded Master app. Can you please help me figure out how to get companion app back on?
foody24 said:
Lokifish, I followed your advice and rooted my TS and surprisingly it was easy. I also downloaded the google App Store. My question is that the Omate Truesmart Companion app is gone and is not even in the ostore so I cannot use it. I already signed up with G+ community and signed up as tester and downloaded Master app. Can you please help me figure out how to get companion app back on?
Click to expand...
Click to collapse
Kurt Huwig, the creator of the app, told me it's being worked on. Part of the problem is the BT in the firmware, not the device HW, has issues that he's trying to get around. Otherwise is causes the BT to lockup and requires a full reboot to enable it again.
Once I can finish the fixes to the firmware and it's gets sent out as an OTA I can work with some fellow devs to see if we can fix the BT for a future OTA. This of course is after Kurt can double check the changes work with the companion app. After that I would expect to see a new version of the companion app to show up in the Ostore.
One more
Sorry but another thing, the OwatchON doesn't seem to work either. I shake my hand, I roll my wrist, I raise my arm, nothing works. Am I doing something wrong?
foody24 said:
Sorry but another thing, the OwatchON doesn't seem to work either. I shake my hand, I roll my wrist, I raise my arm, nothing works. Am I doing something wrong?
Click to expand...
Click to collapse
Brand (iconBit, SimValley, Omate, etc...)
Device (512/4, 1/8)
Model (NA 1900, EU 2100)
Firmware Version (Stock firmware version or custom ROM)
Brand - Omate
Device - 1/8
Model - NA 1900
Firmware - custom build 20140120.154604_v2.0
Lokifish Marz said:
Brand (iconBit, SimValley, Omate, etc...)
Device (512/4, 1/8)
Model (NA 1900, EU 2100)
Firmware Version (Stock firmware version or custom ROM)
Click to expand...
Click to collapse
foody24 said:
Brand - Omate
Device - 1/8
Model - NA 1900
Firmware - custom build 20140120.154604_v2.0
Click to expand...
Click to collapse
Turn the app off
Adjust position and shake levels
Turn app back on
If this does not work then turn off the app and do a full reboot. Check the apps settings and turn the app back on.
Companion app
Okay so I downloaded the master app on my phone and the companion app on my Omate device. I turned on both Bluetooths and they both found each other. When I click the truesmart paired button on my galaxy s3 a message comes on my Omate stating " network access points service of SGH-T999 is unavailable". What am I doing wrong or what else should I be doing?
foody, it was just explained that the app was pulled to fix known issues. If I had one suggestion on what you could do, it would be to wait until the known bugs are fixed.
Sent from my SM-N900T using XDA Premium 4 mobile app
Lokifish Marz said:
Turn the app off
Adjust position and shake levels
Turn app back on
If this does not work then turn off the app and do a full reboot. Check the apps settings and turn the app back on.
Click to expand...
Click to collapse
Hi Lokifish,
when you say adjust position and shake levels, how/where do you do that? I haven't found any settings for owatchon, just on and off.
--fg
fg said:
Hi Lokifish,
when you say adjust position and shake levels, how/where do you do that? I haven't found any settings for owatchon, just on and off.
--fg
Click to expand...
Click to collapse
Then you are using an old version. Update it and the setting will be there.
Lokifish Marz said:
Then you are using an old version. Update it and the setting will be there.
Click to expand...
Click to collapse
That's what I figured from your description. However oStore doesn't list an update available and I've reinstalled oWatchOn. Are you download the newer version from somewhere else?
--fg
We have a test version. The new version will probably be uploaded once the next shipment is done.
Sent from my GT-P5110 using Tapatalk 2
I can´t seem to adjust the volume for speakerphone? Its very loud.
Related
Guys...
We are having way toooo many threads.
Everyone is opening thread for absolutely everything.
Please, don't do that....
Lets talk here...
If have question, you know something that could help others or just wanna say something about TS - please post that here.
We'll work together and help each other.
Omate, obviously, won't help us so we'll do that here...
Please....
Do not spamm this thread with whining post about Omate.
We all know who are they and what they did.
Lets talk and find a way to get best from device we have.
I will reserve two post under this and will add useful answers or something important...
Once again...
PLEASE, DO NOT OPEN NEW THREAD FOR EVERY QUESTION.
POST YOUR QUESTIONS HERE!
@MikeCHannon
Mate, is there any way to make this thread sticy?
It's impossible to find something on Omate thread and it would be great if we could keep this Q&A thread on top.
Tnx
Sent from my C6903 using Tapatalk
Don't say thank you.
If you find something that helped you or you wanna say someone tnx, you have "tnx button" - use it.
Sent from my C6903 using Tapatalk
TIP:
To save your TS buttons root your TS and install Xposed.
Install Gravity box and enable "double tap to sleep" (you have to do that on status bar.
Install app Shake, from market.
By using this app your TS will become real smartwatch.
This app will keep TS sensors on (even rhe screen is off) and you will be able to see clock face or any other app you set by simply movement.
To use button every time you want to see what's the time is ridiculous...
*************************************
ADVICE:
NEVER LET YOUR DEVICE GO TO 0% BATTERY
If the battery drops below a certain level the watch will never charge it. The part of the firmware that is supposed to prevent this........doesn't work. The only option is to use an external charger but there may be a fire risk. // Posted by Loki //
Don't put your TS into water, even if you never opened it.
It'll die for sure.
Even rain could damage it, so be careful and take it of when you go to shower.
Apply security patch by Loki.
That's something you should do as soon as you receive your watch.
Your data won't be safe on your device until you do that...
I'll build Brightness level patch as soon as I get my watch.
Loki already made one but it's not working on latest firmware.
EVEN I OPENED THIS THREAD AND OFFERED MY HELP, SOME OF YOU ARE STILL OPENING NEW THREADS FOR ABSOLUTELY EVERYTHING.
I WON'T PROVIDE ANY HELP ON THAT THREADS.
Keep our yard clean - post here.!
I don't have anything from this thread, I just want organisation and clean Omate section on XDA.
So, if you need my help, read XDA rules and try to help....
Sent from my C6903 using Tapatalk
I cannot get BT to pair with my Xperia Z Ultra, it keeps throwing me the error "Network Access Points Service is unavailable". Any answers to this from previous users? Just got mine yesterday
jeremy.chan said:
I cannot get BT to pair with my Xperia Z Ultra, it keeps throwing me the error "Network Access Points Service is unavailable". Any answers to this from previous users? Just got mine yesterday
Click to expand...
Click to collapse
I guess you have 1/8 2100 EU version?
BT tethering doesn't work on stock ROM.
You have to install TWRP (recovery) and flash Loki Unified or Dees BT ROM.
That ROM will add support for BT tethering and it's way more secured that stock one.
After flashing you could use Cyril companion app... SWapp
Sent from my C6903 using Tapatalk
I got a developers Edition 2100HZ Truesmart from China. Is this the same as the EU version? I'm a bit concerned about installing Loki's patch because I've read I need to factor in the model type. What files should I be using?
Smockingjacket said:
I got a developers Edition 2100HZ Truesmart from China. Is this the same as the EU version? I'm a bit concerned about installing Loki's patch because I've read I need to factor in the model type. What files should I be using?
Click to expand...
Click to collapse
If it's 1900 or 2100 you can't brick device with his Unified ROM.
You have to flash ROM and after flashing ROM you have to flash baseband (zip is provided on Loki thread)
Patching stock firmware could be tricky if you aren't sure which device you have.
So my advice would be - flash full ROM (Unified), that's still stick ROM only patched and better that stock by Omate...
And it's ten times safer in your case...
Sent from my C6903 using Tapatalk
Is there a way I can determine what device I have? I got it from Expansys.jp. From the looks of things it is the same as the EU version, developers edition, but was set to Chinese by default.
Smockingjacket said:
Is there a way I can determine what device I have? I got it from Expansys.jp. From the looks of things it is the same as the EU version, developers edition, but was set to Chinese by default.
Click to expand...
Click to collapse
Yeah...
Go to settings/about and post screenshoot here..
Sent from my C6903 using Tapatalk
just tried loki's rom and rooted, but BT tethering is still not working for the ts and my z ultra, with the stupid "Network Access Points service of ZUltra is unavailable". UGH
Will try Dee's
edit: Dees' still not supporting 1/8/2100 officially, so i guess i'll have to wait again
edit 2: Went ahead with Dees 1/8/1900. STILL getting the tethering error. [email protected]#[email protected]$G#[email protected][email protected]@#[email protected]
FFS!
edit 3: GOT IT TO WORK GODDAMNIT
- When first time pairing, on TS, not able to check "Internet Access" in Bluetooth Profile
- Go to Wireless & Networks -> More -> Tethering -> BT Tethering -> Check the box
- On main phone, do the same for BT tethering
- Connect the 2
- Once connected, reverse the BT Tethering option on the TS
So far working. Bloody hell
Hi, I'm trying to set up some mail-acconts on my omate. Everytime I want to got to scroll down in settings->user to account (Konten in german, don't know the exat wording for this point in english) the setting crashes.
Has anyone an idea, where the problem could be or a different way to get into the menu ?
Ist a 1/8 2100 Truesmart. I've installed lokifishs unified rom. Baseband: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/14 18:16, Kernel 3.4.5, Omate_Truesmart_EnSec 20140427_V2.0
Thanks
hi there
as per loki's thread, if you want to set up the email, don't do it via settings, instead, use the app itself
eg open Mail -> add account
so, my Omate arrived (yay!) and first thing I did, is to flash loki's Unified. Got the 1/8 2100 Dev Edition.
It works quite well so far, but I have a problem with the Ostore. It doesn't show the info, whats the app all about. It is loading when I click on an app, but at a certain point that loading circle symbol just stops and that's it then. Installing is no problem though...
And one question just for curiosity: does it matter if i install an app from the ostore or from play? is there a difference?
cheers!
jeremy.chan said:
hi there
as per loki's thread, if you want to set up the email, don't do it via settings, instead, use the app itself
eg open Mail -> add account
Click to expand...
Click to collapse
Hi, thanks for the answer. And now the stupid question . Where do i find "add account" in the mail-app? Or how can I open the settings? With my normal phone (note 2) I can press the phone-menu-button on the left button while using the mail-app. Is there a equivalent on the omate?
if you're looking for the menu gesture, swipe from the left side of the screen (opposite of swiping from the right as the "Back" button)
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
Eddie08280 said:
so, my Omate arrived (yay!) and first thing I did, is to flash loki's Unified. Got the 1/8 2100 Dev Edition.
It works quite well so far, but I have a problem with the Ostore. It doesn't show the info, whats the app all about. It is loading when I click on an app, but at a certain point that loading circle symbol just stops and that's it then. Installing is no problem though...
And one question just for curiosity: does it matter if i install an app from the ostore or from play? is there a difference?
cheers!
Click to expand...
Click to collapse
Play store is more current in most cases. You'll be better off getting it from there than the Ostore which is mostly broken
Eddie08280 said:
so, my Omate arrived (yay!) and first thing I did, is to flash loki's Unified. Got the 1/8 2100 Dev Edition.
It works quite well so far, but I have a problem with the Ostore. It doesn't show the info, whats the app all about. It is loading when I click on an app, but at a certain point that loading circle symbol just stops and that's it then. Installing is no problem though...
And one question just for curiosity: does it matter if i install an app from the ostore or from play? is there a difference?
cheers!
Click to expand...
Click to collapse
Ostore is something I don't need and I really suggest you to use play store.
Google won't approve
anything and you can be sure there's no malware or spyware there...
in5y372 said:
Hi, thanks for the answer. And now the stupid question . Where do i find "add account" in the mail-app? Or how can I open the settings? With my normal phone (note 2) I can press the phone-menu-button on the left button while using the mail-app. Is there a equivalent on the omate?
Click to expand...
Click to collapse
It should be in email app/settings.
Try to open few drawers and you'll find it.
On my Z1 you have slide apptray frim left and scroll down to see "add acc".
If course on other device could be different.
(Don't have TS so ready can't tell but it must be in settings)
Also, if you have BT keyboard, pair it with TS and set everything up.
It's easier then with on screen keyboard.
BTW, there's no stupid questions, only stupid answers
Sent from my C6903 using Tapatalk
jeremy.chan said:
just tried loki's rom and rooted, but BT tethering is still not working for the ts and my z ultra, with the stupid "Network Access Points service of ZUltra is unavailable". UGH
Will try Dee's
edit: Dees' still not supporting 1/8/2100 officially, so i guess i'll have to wait again
edit 2: Went ahead with Dees 1/8/1900. STILL getting the tethering error. [email protected]#[email protected]$G#[email protected][email protected]@#[email protected]
FFS!
edit 3: GOT IT TO WORK GODDAMNIT
- When first time pairing, on TS, not able to check "Internet Access" in Bluetooth Profile
- Go to Wireless & Networks -> More -> Tethering -> BT Tethering -> Check the box
- On main phone, do the same for BT tethering
- Connect the 2
- Once connected, reverse the BT Tethering option on the TS
So far working. Bloody hell
Click to expand...
Click to collapse
So you don't have 2100MHz now? Is it not as simple as a different baseband (as split up in Loki's ROM)?
Shonky* said:
So you don't have 2100MHz now? Is it not as simple as a different baseband (as split up in Loki's ROM)?
Click to expand...
Click to collapse
No, it's not...
I really don't recommend cross flashing - that's something that could brick your device.
If we all have same firmware that it would be easy to switch from 1900 to 2100 flashing only another baseband but almost every batch have its own firmware and ut could be very dangerous to flash something that's not built for your device...
But really @jeremy.chan
Are you on Dees or Loki now?
You are using SWapp companion by Cyril?
Sent from my C6903 using Tapatalk
I was on Loki, then Dees, the now Loki again. SWapp seems to be working but haven't gone through the thread yet. No other apps can push notifications unless I'm on 4.3?
Sent from my C6833 using Tapatalk
jeremy.chan said:
I was on Loki, then Dees, the now Loki again. SWapp seems to be working but haven't gone through the thread yet. No other apps can push notifications unless I'm on 4.3?
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
No other apps on phone?
Is that what you meant?
Really don't know...
I know SWapp is working OK and Loki Unified ROM is something you must have on device...
Not only because it's good but because there's no alternative
As I said...
My device should be delivered soon, tjen I'll know more, built few things for it and test few things on it...
Sent from my C6903 using Tapatalk
Q&A for [APP] Gliderun *ALPHA*
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APP] Gliderun *ALPHA*. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Polar Loop test
tincore said:
Sports activity tracker
* ALPHA * state.
I'm looking forward for people to test and send suggestions.
Track your sports activities capturing
location
cadence
altitude
power
heart rate
speed
bearing
slope
etc...
Plot progress, lap time and other
Set targets and receive feedback while tracking your session
Works in landscape and portrait
Audio rithmic control.
Reproduce your music at modified tempo to match your cadence.
Enable metronome to help with cadence.
Download or import routes.
Routes export to GPX and KML
Google earth route export *Broken*
Check compass and GPS status
Integration of sensors and wearables
Heart rate and other BTLE sensors.
Miband
Ready to integrate more
Google fit integration
Hi Tincore,
awesome idea you had there, and I am willing to test your app.
Tomorrow evening I'll receive a Polar Loop.
Could you please add in the first post what version of Android one needs to have?
AND, if you need to be rooted for the app to be tested?
I have a GT-I9305 (Samsung galaxy S3 4g) with stock Samsung android 4.4.4
If the second answer is no, I am willing to get my older (though fully working) rooted Nexus One Android 2.3.7, hoping it will work
Best of luck.
Click to expand...
Click to collapse
Maruzziello said:
tincore said:
Sports activity tracker
Hi Tincore,
awesome idea you had there, and I am willing to test your app.
Tomorrow evening I'll receive a Polar Loop.
Could you please add in the first post what version of Android one needs to have?
AND, if you need to be rooted for the app to be tested?
I have a GT-I9305 (Samsung galaxy S3 4g) with stock Samsung android 4.4.4
If the second answer is no, I am willing to get my older (though fully working) rooted Nexus One Android 2.3.7, hoping it will work
Best of luck.
Click to expand...
Click to collapse
No root on this one.
About the Polar loop. If it uses the standard BT characteristics it can show the step count. The code is there but I have not tested it.
About other features I would probably need to reverse protocol for integration.
Click to expand...
Click to collapse
Crashes continually
After last update the application continually crashes and restarts. This can even lead to phone reboot. The one thing that helped is to delete application (this caused my phone to reboot). Android 4.3, MIUI 5.
This app made me register this account and buy a MiBand! Thanks for you work.
The Google Fit integration is amazing enough - but I was wondering if some integration - data import was possible from food logging apps like Myfitnesspal or others on the same tune.
Again, great job, I've already installed this on my phone.
Hi @tincore, JMo from Play Store and email here.
I'm on Mi Band firmware version 1.0.9.55 and I'm not aware of any problems but I'm not using all the features of the app yet. Happy to test for you if you want to tell me what to look for. You're welcome to email too if you prefer.
Never mind I got an answer.
Anyone explain what this means?
Sent from my MT2L03 using XDA Free mobile app
v150 fixed my crashing issue. Hope the same for you.
BlackRaven86 said:
After last update the application continually crashes and restarts. This can even lead to phone reboot. The one thing that helped is to delete application (this caused my phone to reboot). Android 4.3, MIUI 5.
Click to expand...
Click to collapse
Same here 4.3 but Huawei MT2L03 version of android.
Sent from my MT2L03 using XDA Free mobile app
Iguanadon said:
v150 fixed my crashing issue. Hope the same for you.
Same here 4.3 but Huawei MT2L03 version of android.
Sent from my MT2L03 using XDA Free mobile app
Click to expand...
Click to collapse
I wasnt subscribed to this thread!!
tincore said:
I wasnt subscribed to this thread!!
Click to expand...
Click to collapse
I bet you are now
And yes I get the could not add notification null every time when using back or home to close the app
*edit* fixed with v155
Sent from my MT2L03 using XDA Free mobile app
tincore said:
I wasnt subscribed to this thread!!
Click to expand...
Click to collapse
So, as of kind Admin note on http://forum.xda-developers.com/android/apps-games/app-gliderun-alpha-t3057985/page28#post61197566 I shall ask my questions according to Gliderun OPEN BETA _here_, in this thread (no matter the main thread is more active and I found much more solutions there), shan't I? Okay, my question is how the calorie expenditure calculation is done. According to my Tanita body composition scales, my BMR is about 1200-1250 calories, but Gliderun thinks differently and according to Gliderun, I burn ~1000 calories daily even being active. Discouraging. Demotivating.
vexierspiegel said:
So, as of kind Admin note on http://forum.xda-developers.com/android/apps-games/app-gliderun-alpha-t3057985/page28#post61197566 I shall ask my questions according to Gliderun OPEN BETA _here_, in this thread (no matter the main thread is more active and I found much more solutions there), shan't I? Okay, my question is how the calorie expenditure calculation is done. According to my Tanita body composition scales, my BMR is about 1200-1250 calories, but Gliderun thinks differently and according to Gliderun, I burn ~1000 calories daily even being active. Discouraging. Demotivating.
Click to expand...
Click to collapse
Calories estimation is just that an estimation. Makes no sense counting them with to the unit exactitude. Having said that 200 calories is two bananas.
For the record I use VO2 based formulas.
Hi,
Thanks for all the good work! I just have a question. I see that my step count gets updated only if I go to sensor/wear menu, select the miband 1s and then select refresh.
I mean it does not get updated by itself when I open the app or on time intervals, but only manually. Also the step count on the dashboard is a little different than in the sensor/wear menu. Is it normal behaviour or am I doing something wrong?
Thanks
Sent from my MI PAD using Tapatalk
geopapa said:
Hi,
Thanks for all the good work! I just have a question. I see that my step count gets updated only if I go to sensor/wear menu, select the miband 1s and then select refresh.
I mean it does not get updated by itself when I open the app or on time intervals, but only manually. Also the step count on the dashboard is a little different than in the sensor/wear menu. Is it normal behaviour or am I doing something wrong?
Thanks
Sent from my MI PAD using Tapatalk
Click to expand...
Click to collapse
It should update unless sensor tracking is disabled. In that case you would only get data if you synchronize.
It could also be that a band sensor is disabled and the one active is the one on the phone. You can see the active one on sensors screen.
tincore said:
It should update unless sensor tracking is disabled. In that case you would only get data if you synchronize.
It could also be that a band sensor is disabled and the one active is the one on the phone. You can see the active one on sensors screen.
Click to expand...
Click to collapse
I have only enabled the band pedometer and disabled the phone sensor to save battery. I now see that it actually updates but every now and then..
Sent from my MI PAD using Tapatalk
Did you guys ever notice the "GALA" function of your stock radios?
When you drive faster the volume is raised automagically.
I really love this feature and miss it here. BUT I am currently coding an App to fix this lack
I hope you are looking forward to this and so I have a Alpha Verison ready for you. But beware! it is not tested in live environment yet!!!
I will update this post with any new version or information.
Hint: GALA = german "Geschwindikeitsabhängige Lautstärkeanhebung" which means "Speed-sensitive volume increasement"
On Google Play: https://play.google.com/store/apps/details?id=de.firesplash.galaapp
//Updated 2014-06-17
Do you have an updated version of this or no? I know this is an old thread but someone pointed it out to me.
Dave
TT_Vert said:
Do you have an updated version of this or no? I know this is an old thread but someone pointed it out to me.
Dave
Click to expand...
Click to collapse
There is Car Service app that supports this among other fubctions
https://play.google.com/store/apps/details?id=com.petrows.mtcservice
It is preinstalled on e.g. Malaysk ROM. I would recommend to use it as is is stabile and proven to work on our units.
pa.ko said:
There is Car Service app that supports this among other fubctions
https://play.google.com/store/apps/details?id=com.petrows.mtcservice
It is preinstalled on e.g. Malaysk ROM. I would recommend to use it as is is stabile and proven to work on our units.
Click to expand...
Click to collapse
That's what I was using but I was having an issue w/ the first speed jump being more than the specified jump. The new Malaysk ROM fixed that though.
Dave
There are settings in RK3066 HEADUNIT, is this kph or if the unit is on MPH, do I use those values 2 settings for up and down?
Oldpapa49 said:
There are settings in RK3066 HEADUNIT, is this kph or if the unit is on MPH, do I use those values 2 settings for up and down?
Click to expand...
Click to collapse
Same question here.
I see the setting in the Malaysk ROM, but it's not quite clear what the numbers mean or what the reference units are. It'd be nice if there were further explanations.
I tried some settings. They are KPH values for each volume kick up or down. I did 40, 70, 100 and the volume goes up or down at those thresholds.
It was confusing for the default values.
Sent from my SM-G920T using XDA-Developers mobile app
Hi , the way, this discussion seems dead and the "Gala" application too. I'm looking for an app SDVC that increases volume based on speed on my PX5 android 6. Unfortunately Gala does not work on my unit like any other I've tried. I would like some developers to make an application for all Px5 MTCD or better yet updated " Gala" that supports MTCD Px5. I hope some genius will do it soon.
I am also (and many PX5 user too ) very interestest on a app like "RK3066 Headunit" or "S.D.V.C." (unfortunately Android 4.4/5.1.1 only) , which can provide Speed Depend Volume Change for Android 6 / PX5 users!
Come on Guys, i believe somebody can programming a small SDVC-tool - I would donate for it!
We hope that a developer will consider this request. Many Px5 users want it.
Do not you move a leaf for this? !!
Is anyone get this GALA function (increase volume from speed) i have PX3 with Malaysk 3.1 rom,but I not see MTC SERVICE in Malaysk rom,and I can't get this function to work in any way ???
I have created an app that does that https://play.google.com/store/apps/details?id=net.festinger.autovolume
ronenfe said:
I have created an app that does that https://play.google.com/store/apps/details?id=net.festinger.autovolume
Click to expand...
Click to collapse
...installed your app a few days ago - but can't figure out, how to set it up properly so that it works. is there even an option like a settings menu? all i can see, is the speedometer (working - means: the speed is shown) and the volume: recognizes the volume i set via volume-knob.. BUT: the volume does not change at all, no matter how fast or slow i drive... is there anything i can do?
how is this app supposed to work??
I've made an instruction video, see if it helps.
ronenfe said:
I've made an instruction video, see if it helps.
Click to expand...
Click to collapse
wow. thanks a lot for your work and uploading an explanation. but unfortunately this did not solve the problem. it seems, the app is not working on my head unit - it's a s32f0_leima, rk3368.
maybe your app is only for phones?!
i recorded a video of my last try with your app - i set the minimum volume to 8 and the max to 20 - for testing i set the speed between 10 and 120... your app is showing the speed, but the volume never changes - it only displays the current volume which i set via volume knob. it also recognizes, when i change the volume by myself via volumen knob - but the app unfortunately does not change the volume at all
...link to the recording: https://www.dropbox.com/s/d2nc5w0opc9i3de/VID-20230111-WA0000.mp4?dl=0
...any ideas? or maybe you can adapt the app for head units?! would be great!!
Sorry, you are correct, it won't work on head units, didn't work on mine either. Google doesn't think controlling volume from an app is needed there. https://issuetracker.google.com/issues/172344922?pli=1 .
volume control with buttonless MTCE
Hello all, So I purchased a buttonless PX5: https://www.aliexpress.com/item/Android-8-0-2-Din-8-Inch-Car-DVD-Player-Stereo-System-For-Porsche-911-997/32849648099.html?spm=a2g0s.9042311.0.0.qvQ36y However, none of the Android widgets or volume...
forum.xda-developers.com
One of the users told me he could use FCC launcher and the auto volume there worked. I don't know how they managed to do it, you can try it. https://play.google.com/store/apps/details?id=ru.speedfire.flycontrolcenter&hl=en&gl=US
Hi Guys !
Seems to be another update ...B09
Date 2016-12-23
2.24G
http://www.ztedevice.com/support/detail?id=1170789A90BA42E18B3364B80C7F5A26
Translated : (out of spanish log)
� Optimize the compatibility with third-party applications.
� Optimize the stability of the system and the performance of the battery.
� ZTE Locker (ZTE screen saver).
� New package of safety of Google.
� Improvement of notifications.
� Improvement of the translations.
� Improvement of the camera.
EDIT : i compared the B08 and B09 file
B08 last modified on 25.11.2016 2.355.208kb
B09 last modified on 09.12.2016(?) 2.353.116kb
So B09 is modified later and a little smaller in size
Is it the same ? I dont know...
EDIT 2 : Someone on Androidhilfe has tested it already after seeing this thread :
*still 6.0.1
*same securitypatch date
*same baseband , kernel
For me though it stays strange that on an official website like ZTE promotes a B09....if there were no differences, why the effort ??
So let's test this update further and make some conclusions.
I am from Germany and have the B08 installed. I think it should be no problem to use the spanish version, right? Via OTA check I constantly get a network error since few days... :/
gesendet per Tapatalk mit ZTE Axon 7
rigajoachim said:
I am from Germany and have the B08 installed. I think it should be no problem to use the spanish version, right? Via OTA check I constantly get a network error since few days... :/
gesendet per Tapatalk mit ZTE Axon 7
Click to expand...
Click to collapse
No problem to use the spanish version. In fact the spanish one is the only at this time which shows B09.
Hong Kong, Singapore, Sweden show different version of A2017G
You're right that the ZTE network is down. I am waiting, if there comes one, for the OTA.
If so i will pull the link in logcat to share.
Thank you very much
gesendet per Tapatalk mit ZTE Axon 7
Thanks. I updated to b09 and notifications in the lockscreen are still broken. You can't interact with them without unlocking the phone
JuanIrache said:
Thanks. I updated to b09 and notifications in the lockscreen are still broken. You can't interact with them without unlocking the phone
Click to expand...
Click to collapse
What do you mean by "broken"?
Update: Only interact is the issue?
obladi64 said:
What do you mean by "broken"?
Click to expand...
Click to collapse
You can't interact with them through the quick action buttons, reply, archive, things like that. The problem is that when you expand them, they contract again. It was already there in b08.
JuanIrache said:
You can't interact with them through the quick action buttons, reply, archive, things like that. The problem is that when you expand them, they contract again. It was already there in b08.
Click to expand...
Click to collapse
I see. I have never tried it in B08 but by now I also updated to B09.
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
I tried it now and taping notification app was started. May be you though different behavior.
obladi64 said:
[/COLOR]I tried it now and taping notification app was started. May be you though different behavior.
Click to expand...
Click to collapse
The issue is that if you, for example, receive an email and get the gmail notification, you can't expand the notification and use the reply and archive/delete button because the notification contracts immeddiately to its state without the buttons. You can tap the notification to launch the app, yes, but that's inconvenient if you can do the required action through the button.
jpde said:
The issue is that if you, for example, receive an email and get the gmail notification, you can't expand the notification and use the reply and archive/delete button because the notification contracts immeddiately to its state without the buttons. You can tap the notification to launch the app, yes, but that's inconvenient if you can do the required action through the button.
Click to expand...
Click to collapse
I have got it. And was it available in B08? I didn't realize it but it doesn't mean anything because I have never been missing it although it would be useful really.
No, the bug was introduced in b08, the supposed "fix" for the notification bell (that ZTE USA successfully implemented weeks ago with obvious bugs such as this one, but I digress..)
JuanIrache said:
Thanks. I updated to b09 and notifications in the lockscreen are still broken. You can't interact with them without unlocking the phone
Click to expand...
Click to collapse
Well since they didn't fix the broken lock screen with BO9 it's not worth updating at all.
We will wait until Android N in couple of weeks released.
obladi64 said:
I have got it. And was it available in B08? I didn't realize it but it doesn't mean anything because I have never been missing it although it would be useful really.
Click to expand...
Click to collapse
Before installing B08 was working absolutely fine with all previous version.
Let's hope being fix with Nougat upgrade next month.
It's quite annoying that bug since it's one of the major feature of Android M having the ability to interact through lock screen for various app Watchapp,Viber,Gmail and so on and with B08 is broken.
Even listening music through lock screen the management of music control is limiting.
Sent from my iPad using Tapatalk
Another secret update from ZTE. From what I understand the unannounced updates would logically have minor fixes to the things they messed up in the announced update i.e. B08.
Dolby still switching off when plugging headphones. It does not look like they fixed anything really. Maybe the problem with delayed notifications? Hard to be 100% sure, but I have not felt like there were delays since the update.
JuanIrache said:
Dolby still switching off when plugging headphones. It does not look like they fixed anything really. Maybe the problem with delayed notifications? Hard to be 100% sure, but I have not felt like there were delays since the update.
Click to expand...
Click to collapse
I wouldn't think that it is bug. It is the appropriate way in case of a phone is made for audiophiles.
obladi64 said:
I wouldn't think that it is bug. It is the appropriate way in case of a phone is made for audiophiles.
Click to expand...
Click to collapse
Why do you think that? Do audiophiles not want their phone to remember their preferred settings?
Or is Dolby bad for a proper audio experience? In that case, should not we be free to choose whether we want it or not?
JuanIrache said:
Why do you think that? Do audiophiles not want their phone to remember their preferred settings?
Or is Dolby bad for a proper audio experience? In that case, should not we be free to choose whether we want it or not?
Click to expand...
Click to collapse
I don't want to tell others what they want to. But if I was who made this phone I did the same. Dolby is not an audiophile thing. But an audiophile is not always audiophile. Sometime they can turn dolby on due few reasons but mainly non of them will use it for listening music on headphone. I would hate if next time I plug headphone I need to turn it off manually. If I use dolby it has good reason (mostly movie) and usually it is only one time event for specific material.
Otherwise dolby remains turned on in case of speakers and it is also fine. It is reasonable.
So current functionality is quite good for me. Also it would be fine If it was switchable.
bonk3rzzz said:
Another secret update from ZTE. From what I understand the unannounced updates would logically have minor fixes to the things they messed up in the announced update i.e. B08.
Click to expand...
Click to collapse
Yep typical ZTE behavior:lol
Sent from my iPad using Tapatalk
JuanIrache said:
Why do you think that? Do audiophiles not want their phone to remember their preferred settings?
Or is Dolby bad for a proper audio experience? In that case, should not we be free to choose whether we want it or not?
Click to expand...
Click to collapse
obladi64 is right - Dolby is not audiophile thing.
I myself dont like any added software effects on my music. axon7 shines with FLAC's. and if you are audiophile you surely dont want to ruin all those subtile sounds with unecessary software adjustments.
first thing is high quality music, then headphones, then DAC/AMP. I can say I cant listen to 320kbps MP3's as they sound awful with my setup.
anyways everyone's hearing is different, and music taste is different, so you have to choose what is best for you.
B09 ist just a full build that will be used for newly produced devices or as a restore image. Nothing more.
Hello!!
I'm looking at the unlocked UK version on Clove, and was hoping I could have one of you test to see if the zoom really suppprts the new GNSS tech.
More info here... https://medium.com/@sjbarbeau/dual-frequency-gnss-on-android-devices-152b8826e1c
The app to use is GPS test by barbeauDev.
Tia!
charlatan01 said:
Hello!!
I'm looking at the unlocked UK version on Clove, and was hoping I could have one of you test to see if the zoom really suppprts the new GNSS tech.
More info here... https://medium.com/@sjbarbeau/dual-frequency-gnss-on-android-devices-152b8826e1c
The app to use is GPS test by barbeauDev.
Tia!
Click to expand...
Click to collapse
Hi! I have a CPH1919 global version.
Here is a screenshot of the GPS test app. I hope it helps.
thinman24 said:
Hi! I have a CPH1919 global version.
Here is a screenshot of the GPS test app. I hope it helps.
Click to expand...
Click to collapse
Thanks for posting, and thanks for downloading that app. However, that's not the app I am looking for info on. It's also called GPS test, but in the play store it should show up as one word.. GPStest. It's created by barbeauDev.
If you could download that one and snap a sreenshot after letting it run 30 seconds or so that'd be awesome!
charlatan01 said:
Thanks for posting, and thanks for downloading that app. However, that's not the app I am looking for info on. It's also called GPS test, but in the play store it should show up as one word.. GPStest. It's created by barbeauDev.
If you could download that one and snap a sreenshot after letting it run 30 seconds or so that'd be awesome!
Click to expand...
Click to collapse
Well, the App I downloaded is called GPSTest and it is from barbeauDev. It's exactly the App you asked to be downloaded.
As you can see it on the screenshot, it is using GNSS and it is actually using four different systems (GPS, Glonass, Galileo, BeiDou) to determine it's position.
All symbols with a thick black frame are used in that sample.
I use the phone for navigation every day and although it is sitting in the car on the center console below the belt line, it still has no problem navigating.
I guess you have been looking for the L5/E5a signals in the carrier frequencies. Just to reassure you, here is an image which shows that the Reno 10x can receive these signals: