Related
That's easy, if your phone is bricked like too many people do it:
http://www.youtube.com/watch?v=zS2LIuy6YfY
That's what I tell to many people do and they said it works, so stop spamming the sections speaking: "My cellphone is bricked, help me!". Hope it saves your life too
UPDATE: According to our friend, the updated version of PC companion doesn't work anymore, so please check the instructions on this video!
http://www.youtube.com/watch?v=t6QhJaCsdD4
Hello.
I'm having problems with my XPERIA x10i phone. This morning I was changing the case with new one. The full case, not just the cover. And then, my software was stuck in a loop at the Sony Ericsson logo. I tried installing the software with PC Companion, Update Service, FlashTool and none of them seems to work! They all stuck at the same place!
What could be the problem???
Thanks in advance!
Vengeance66 said:
Hello.
I'm having problems with my XPERIA x10i phone. This morning I was changing the case with new one. The full case, not just the cover. And then, my software was stuck in a loop at the Sony Ericsson logo. I tried installing the software with PC Companion, Update Service, FlashTool and none of them seems to work! They all stuck at the same place!
What could be the problem???
Thanks in advance!
Click to expand...
Click to collapse
You probably didn't put it back together properly.
SmG67 said:
You probably didn't put it back together properly.
Click to expand...
Click to collapse
I thought of that and I've reassembled looking at this video youtube com /watch?v=JVBTCgAzkY4
I did everything like in the video. If I didn't put anything correctly, the phone wouldn't start... :/
Any specific ideas to look for?
Thanks a lot!
If you had the battery disconnected during your work changing the case (and you definitely should), then put your phone to charge in wall plug for at least 15 minutes (or even more) and then try to turn it on...
dimfil said:
If you had the battery disconnected during your work changing the case (and you definitely should), then put your phone to charge in wall plug for at least 15 minutes (or even more) and then try to turn it on...
Click to expand...
Click to collapse
I've tried and after 5 min. the phone start itself and starts the loop.
I've installed older version of FlashTool and read this line:
Loader version : R4A024 / Bootloader status : UNROOTABLE
I'm trying again...
Did you successfully flash firrmware using flashtool? If so, whaat firrmware did you use?
teddymild said:
Did you successfully flash firrmware using flashtool? If so, whaat firrmware did you use?
Click to expand...
Click to collapse
I used the latest version of Flashtool, and later I tried older version. No use...
I opened a thread explaining everything I did...
http://forum.xda-developers.com/showthread.php?p=35199815#post35199815
Does it mean you can't get flashtool flash firmware? Or after flashing you're facing the same problem ?
teddymild said:
Does it mean you can't get flashtool flash firmware? Or after flashing you're facing the same problem ?
Click to expand...
Click to collapse
After flashing I'm facing the problem. Now, the phone just shows the lights on the screen, no SE logo...
The flashing finishes perfectly with no errors and the phone is connecting again in flash mode with the green LED in the upper part. But, when I try to turn on the phone, just the blank screen is lighted, no logo...
Is my phone dead?
I think so
Sorry I can't help you.
Edit. Have you tried another firmware/re download the file? Just in case. Good luck bro.
teddymild said:
I think so
Sorry I can't help you.
Edit. Have you tried another firmware/re download the file? Just in case. Good luck bro.
Click to expand...
Click to collapse
Yes I tried. Do you have any working firmware (tried)?
In the service center, the guy told me something about wiring the phone under the battery. That was the last hope for the phone...
Thanks!
Vengeance66 said:
Yes I tried. Do you have any working firmware (tried)?
In the service center, the guy told me something about wiring the phone under the battery. That was the last hope for the phone...
Thanks!
Click to expand...
Click to collapse
What is your exact model? Because you stated you were running Gingerbread 2.3.3 on it... Was that the original firmware it came with? I think you need to be in this forum, for the 'big' X10, and not the X10 Mini (e10i).
SmG67 said:
What is your exact model? Because you stated you were running Gingerbread 2.3.3 on it... Was that the original firmware it came with? I think you need to be in this forum, for the 'big' X10, and not the X10 Mini (e10i).
Click to expand...
Click to collapse
Yes I know, sorry my bad. You are right, I'm not in the right place... But, none answers on x10 forums. I got Xperia X10i model that came with the original firmware which was officially updated to 2.3.3.
Sorry for replying here, but I opened up a thread there in which I explain everything detailed...
Thanks!
Vengeance66 said:
Yes I know, sorry my bad. You are right, I'm not in the right place... But, none answers on x10 forums. I got Xperia X10i model that came with the original firmware which was officially updated to 2.3.3.
Sorry for replying here, but I opened up a thread there in which I explain everything detailed...
Thanks!
Click to expand...
Click to collapse
It's ok, but i don't think any of us have firmware for your phone... You'll have to find it there...
http://forum.xda-developers.com/showthread.php?p=28235376
How to restore original sony ericsson firmware?
XxLordxX said:
That's easy, if your phone is bricked like too many people do it:
That's what I tell to many people do and they said it works, so stop spamming the sections speaking:
"My cellphone is bricked, help me!". Hope it saves your life too
Click to expand...
Click to collapse
The new version of PC Companion no longer has a repair option, however the same method can be used with SE Update
Service... Watch Youtube Video Tutorial @ watch?v=t6QhJaCsdD4 ... Well hope you find this helpful... Enjoy!
Silichip said:
The new version of PC Companion no longer has a repair option, however the same method can be used with SE Update
Service... Watch Youtube Video Tutorial @ watch?v=t6QhJaCsdD4 ... Well hope you find this helpful... Enjoy!
Click to expand...
Click to collapse
Well, this video was made in 2011 hehe, I'll post an update on the OP then. Thanks for sharing this info .
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my Monster S4
XxLordxX said:
Well, this video was made in 2011 hehe, I'll post an update on the OP then. Thanks for sharing this info .
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my Monster S4
Click to expand...
Click to collapse
You're welcome, glad to assist...
I have Galaxy s WiFi 5.0 and i have tried to install the official firmware but now my device get a Black Screen only! I cant open it and the UnBrickable Resurector can't detect it ! Please help me. I bought the device yesterday !
Help please
Ahmed Karim said:
I was taring to restore to official firmware with Odin, but something wrong happened and closed Odin. When I restarted my device i got this error and i can't got to download mod or recovery mod.
View attachment 1016059
Any Idea ?
Click to expand...
Click to collapse
That is download mode. Connect it and odin will recognize it.
Sent using Tapatalk
klin1344 said:
That is download mode. Connect it and odin will recognize it.
Sent using Tapatalk
Click to expand...
Click to collapse
Does it take a long time to install a firmware?
This is my first time to use Samsung mobile, so am a Nope
http://imageshack.us/photo/my-images/844/131210588377.jpg/
That's the soft break ,
read it ; http://forum.xda-developers.com/showthread.php?t=1465144&page=13
page 13, 14 and 15
connect with computer after flash rj's kernel , you can fix this way.
eng_matt said:
http://imageshack.us/photo/my-images/844/131210588377.jpg/
That's the soft break ,
read it ; http://forum.xda-developers.com/showthread.php?t=1465144&page=13
page 13, 14 and 15
connect with computer after flash rj's kernel , you can fix this way.
Click to expand...
Click to collapse
I now have black screen. after that I have tried to install a firmware with odin
Sent from my E15i using xda premium
Ahmed Karim said:
I now have black screen. after that I have tried to install a firmware with odin
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Which firmware? You flashed one with the wrong bootloaders so that's why it doesn't turn on.
Sent using Tapatalk
klin1344 said:
Which firmware? You flashed one with the wrong bootloaders so that's why it doesn't turn on.
Sent using Tapatalk
Click to expand...
Click to collapse
I flashed This CODE_G70XXKPH_CL1013658_REV01_user_low_ship_HOME.tar.md5
Ahmed Karim said:
I flashed This CODE_G70XXKPH_CL1013658_REV01_user_low_ship_HOME.tar.md5
Click to expand...
Click to collapse
A home version dosen't contain the bootloaders but what did you do to get it like this?
Please do a search in the dev section. There's a way to get this fixed. You need to follow the steps.
cvcduty said:
Please do a search in the dev section. There's a way to get this fixed. You need to follow the steps.
Click to expand...
Click to collapse
I didn't find any Thread about this problem !
black
Do you see the blackscreen after the samsung logo?
I had that too! My luck was CWM. I installed it before and could get into it.
Then I had to restore an old backup.
crowelfly said:
Do you see the blackscreen after the samsung logo?
I had that too! My luck was CWM. I installed it before and could get into it.
Then I had to restore an old backup.
Click to expand...
Click to collapse
No before the samsung logo. I cant install any rom cuz pc cant detect my device
Ahmed Karim said:
I didn't find any Thread about this problem !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1386669
Go towards the end of the thread.
I had a black screen brick and used this method to get mine resurrected.
Good luck.
cvcduty said:
http://forum.xda-developers.com/showthread.php?t=1386669
Go towards the end of the thread.
I had a black screen brick and used this method to get mine resurrected.
Good luck.
Click to expand...
Click to collapse
I have tried UnBrickable Resurector but it didn't recognize my device. How did you fix your device?
Ahmed Karim said:
I have tried UnBrickable Resurector but it didn't recognize my device. How did you fix your device?
Click to expand...
Click to collapse
Mine were all black screen but when I plugged into the PC, I would get it recognized as SEC-S5.... (can't recall the exact driver it was looking for). So mine was semi recognized. Now, if you are telling me that your PC does not recognize it at all, I am not sure what to tell you.
so guys i messed up my phone can somebody help to be restored to the factory image ? i was trying lgnpst but with no success , i was on 0.6 with twrp, any advice ?please
What is wrong?
Sent from my LG-E970 using xda premium
Boot into recovery, restore back. You DID backup?
Sent from my LG-E970 using xda premium
craigbailey1986 said:
What is wrong?
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
1.I installed twrp
2. Iflashed 0.6:and i got in a bootloop
3.tryed lgnpst with no succes
Can u guys give me some pointers ? I was trying to lgnpst on win 8 thats my trouble?do i need to use win 7? Any of u guys can lgnpst flash factory img on my phone ........
http://forum.xda-developers.com/showthread.php?t=2013067
It's really not that hard to browse forums, is it?
marcwilf4rt said:
1.I installed twrp
2. Iflashed 0.6:and i got in a bootloop
3.tryed lgnpst with no succes
Click to expand...
Click to collapse
Tell what went wrong with hte LGNPST attempt. It's almost impossible to help, if we don't know what specifically went wrong.
dbgeek said:
Tell what went wrong with hte LGNPST attempt. It's almost impossible to help, if we don't know what specifically went wrong.
Click to expand...
Click to collapse
At the install of the last components i got error 171....what that means is above me ...bat maybe i need to do more research....
marcwilf4rt said:
1.I installed twrp
2. Iflashed 0.6:and i got in a bootloop
3.tryed lgnpst with no succes
Click to expand...
Click to collapse
marcwilf4rt said:
At the install of the last components i got error 171....what that means is above me ...bat maybe i need to do more research...
Click to expand...
Click to collapse
So it just said "Error 171"? How far into the process did it get, before you got the error? Most people error out at 85% with a restored phone.
dbgeek said:
So it just said "Error 171"? How far into the process did it get, before you got the error? Most people error out at 85% with a restored phone.
Click to expand...
Click to collapse
here is my problem is a screenshot of my pc taken with record feature of win 8 ,
marcwilf4rt said:
here is my problem is a screenshot of my pc taken with record feature of win 8 ,
Click to expand...
Click to collapse
Looks like a LGNPST install issue. Did you do the install per the instructions in the LGNPST on Windows 8 thread, found in the Optimus G General section?
dbgeek said:
Looks like a LGNPST install issue. Did you do the install per the instructions in the LGNPST on Windows 8 thread, found in the Optimus G General section?
Click to expand...
Click to collapse
yes ..........ill back in couple days ......on fresh install
Hello, I think I bricked my i9377 Haipai, to flash it, no lights, I do not detect the pc and I get the recovery. I can do something??? I have a beautiful brick or
thanks
yosymura said:
Hello, I think I bricked my i9377 Haipai, to flash it, no lights, I do not detect the pc and I get the recovery. I can do something??? I have a beautiful brick or
thanks
Click to expand...
Click to collapse
If you can get to recovery mode try update to the stock Rom.
lingfude said:
If you can get to recovery mode try update to the stock Rom.
Click to expand...
Click to collapse
And I can do what I comets or if there is a manual.
Solution
yosymura said:
Hello, I think I bricked my i9377 Haipai, to flash it, no lights, I do not detect the pc and I get the recovery. I can do something??? I have a beautiful brick or
thanks
Click to expand...
Click to collapse
It can be unbricked, check this italian forum, with some help from google translate it can bring your phone back to life again! It worked with mine
You can also find other interesting things to do in your Haipai.
Check "Parte 3" to unbrick.
Frist write WWW, and then the rest of the adress below without spaces:
androidiani . com / forum / altri-terminali-mtk / 231526-i9377 - plus.html
Sorry, i´m new in forum and i'm not allowed to post external links, but i really wanted to help so...
Hello everyone. I was asking myself, if it is possible to get the stock firmware back ^^
davidvandertier said:
Hello everyone. I was asking myself, if it is possible to get the stock firmware back ^^
Click to expand...
Click to collapse
Look at the sticky in General Forum. All you need to know is there.
Sent from my D6503 using XDA Premium 4 mobile app
But I cannot get into flashmode . I tried the volume down+ connecting the usb but the only thing I can see is, that the LED is flashing 3 times. 3 different colours pleas help
davidvandertier said:
But I cannot get into flashmode . I tried the volume down+ connecting the usb but the only thing I can see is, that the LED is flashing 3 times. 3 different colours pleas help
Click to expand...
Click to collapse
i meant fastboot mode ^^
(1) Use PC Companion and do a repair.
(2) Download the relevant firmware file and use Flashtool to flash.
I will try this right now and I will report if it worked or not ^^
davidvandertier said:
I will try this right now and I will report if it worked or not ^^
Click to expand...
Click to collapse
UPDATE: waiting for charging . I have to waiit untill my battery is half-way full
Okay.. Tried it.. Didnt work :c
davidvandertier said:
UPDATE: waiting for charging . I have to waiit untill my battery is half-way full
Okay.. Tried it.. Didnt work :c
Click to expand...
Click to collapse
You need to provide a lot more information.
If you follow the OP I gave you in the earlier post, it works. Why are you using Fastboot??? You should be using Flashmode in Flashtool.
You need to ensure you have the correct PC drivers.
Again, assuming you have read and followed the suggested linked method, provide more info about your phone state.
And which method did not work? Us your bootloader unlocked?
hush66 said:
And which method did not work? Us your bootloader unlocked?
Click to expand...
Click to collapse
How can I see if it is unlocked ^^ sorry im a noob+
Unlocking is an intentional act. If you have not done it before, then it's still locked.
hush66 said:
Unlocking is an intentional act. If you have not done it before, then it's still locked.
Click to expand...
Click to collapse
oh okay. Is this really relevant? Because.. I dont know but I think, that the warranty void is damaged by doing so
It's relevant because if your bootloader is unlocked, then you need to use Sony Flash Tool to flash stock firmware.
So which method failed for you? And which step failed and what's the error? You need to give us more info so that we can help you.