Related
Hey guys,
So I am running an ancient rom, GladiAtrix 3 rom with version 2.2.2 of Android. I finally want to flash a new rom, for example Olympus Gold Edition 2.3.6, with Blur so I can retain Webtop. However, it has been so long and all I read on these stickies when I'm trying to relearn are warnings for not hard bricking your Atrix and I am farily confident it doesn't apply to me because I am still not even on 2.3.4 and don't plan on going back to Android 1.8.3. But can someone just confirm for me really quick before I go about flashing if I need to worry about the hard bricking situation?
(All I gotta do is just backup, and follow the installation steps? Or should I factory reset, stock rom flash, THEN flash the new Olympus ROM?)
Thanks in advanced for stoppin by!
Regards,
If you're unlocked, just flash the ROM in recovery mode. Simple.
Edit: You might have to factory reset first, but only try that if the ROM doesn't work! Make a backup.
nerfman100 said:
If you're unlocked, just flash the ROM in recovery mode. Simple.
Edit: You might have to factory reset first, but only try that if the ROM doesn't work! Make a backup.
Click to expand...
Click to collapse
Factory resetting's on my list! Thanks for the reply! It's been so long since I played w my Atrix and I totally forgot all the old school methods of unlocking and I can't remember (been a year a half) whether or not I did... but I am reading now that it should say "unlocked" on the motorola bootup but mine doesnt show. Although, I am able to enter CWM for sure... so I have no idea whether or not I'm unlocked, everyone's answers are both yes and no so it's confusing me
Is it safe for me to just run the automated unlocker script http://forum.xda-developers.com/showthread.php?t=1182871 anyways, as well as being on 2.2.2? (This of course after factory resetting) Thanks so much in advanced!
EDIT: This is my last question sorryyy then I can start my new ROM flashing!!! woohoo
Being an old member who's obviously done this kind of thing before (even if forever ago), I'd think you would know already that questions go in the Q&A section.
ravilov said:
Being an old member who's obviously done this kind of thing before (even if forever ago), I'd think you would know already that questions go in the Q&A section.
Click to expand...
Click to collapse
Way ahead of you bro. Check this out. http://forum.xda-developers.com/showthread.php?t=1872657
Posted, no replies, even bumped it and waited 2.5 weeks. What do you expect? Haha, but do you have the answer to my final question?
Hope that satisfies your answer ^___^ It's easy to see why some people prefer the general vs the other parts of the forums. No answer after 3 weeks vs an answer within the hour bahahaha.
Flash new recovery, wipe, flash new zip...
Sent from my MB860 using Tapatalk 2
Hey Everyone,
I am brand new to Android and cannot thank these forums enough already on all the help I have had already in the one week I have been here. I hope one day I will be fluent enough to help out people as much as I have been helped.
My quick questions is, I am rooted and everything else is stock still. I have backed up on TWRP and Titanium. Let's say I want to try and flash a custom ROM. If i decide I want to go back to this untouched but rooted state, do I just have to run the backup from TWRP? Or is there a rom I have to flash to get back to the state I am in now?
Any help or clarification would be great. Thanks!
Nyisles84 said:
Hey Everyone,
I am brand new to Android and cannot thank these forums enough already on all the help I have had already in the one week I have been here. I hope one day I will be fluent enough to help out people as much as I have been helped.
My quick questions is, I am rooted and everything else is stock still. I have backed up on TWRP and Titanium. Let's say I want to try and flash a custom ROM. If i decide I want to go back to this untouched but rooted state, do I just have to run the backup from TWRP? Or is there a rom I have to flash to get back to the state I am in now?
Any help or clarification would be great. Thanks!
Click to expand...
Click to collapse
Correct. You would wipe the device and then restore your backup
Sent from my SCH-I545 using Tapatalk 2
twiz0r said:
Correct. You would wipe the device and then restore your backup
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Awesome. I really appreciate it.
I currently have the Verizon Note 2, now rooted, and wondering if I can use the Dirty AOKP 5.1 rom. I know it is under the nexus 7 developer site, but are roms able to be used on different phones?
Also, I used casual to root my device, then backed up my apps and systems on titanium backup (not pro), but do not know where to go from here to load the rom. Do i run casual again and once I get into that team wiz menu, flash the rom from there?
Sorry, been reading up on this site but some of the lingo i'm not familiar with quite yet.
Do i make a new folder on my sd card and move the rom to that folder first?
Thanks a bunch~
Unless the rom is meant for our phones. Flashing something like that can brick your phone. Now that you're rooted, install twrp and then you can start flashing custom roms. There are plenty of good aokp roms here, but don't risk damaging your device.
Current device:
Samsung Galaxy Note 2
Running Moon rom V2 w/ Perseus OC to 1.8ghz, pimped out with the zero lemon 9300 mah
Retired devices:
Huawei Ascend, Droid Charge, Droid Bionic
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
tigersfa8 said:
I currently have the Verizon Note 2, now rooted, and wondering if I can use the Dirty AOKP 5.1 rom. I know it is under the nexus 7 developer site, but are roms able to be used on different phones?
Also, I used casual to root my device, then backed up my apps and systems on titanium backup (not pro), but do not know where to go from here to load the rom. Do i run casual again and once I get into that team wiz menu, flash the rom from there?
Sorry, been reading up on this site but some of the lingo i'm not familiar with quite yet.
Do i make a new folder on my sd card and move the rom to that folder first?
Thanks a bunch~
Click to expand...
Click to collapse
i suggest going over to droidstyle's guide and checking it out before doing anything.
---------- Post added at 07:51 PM ---------- Previous post was at 07:49 PM ----------
ztotherad said:
i suggest going over to droidstyle's guide and checking it out before doing anything.
Click to expand...
Click to collapse
EDIT: hers the link to the guide bro. hit it up before you go and brick your $700 phone. http://forum.xda-developers.com/showthread.php?t=2024207
tigersfa8 said:
I currently have the Verizon Note 2, now rooted, and wondering if I can use the Dirty AOKP 5.1 rom. I know it is under the nexus 7 developer site, but are roms able to be used on different phones?
Also, I used casual to root my device, then backed up my apps and systems on titanium backup (not pro), but do not know where to go from here to load the rom. Do i run casual again and once I get into that team wiz menu, flash the rom from there?
Sorry, been reading up on this site but some of the lingo i'm not familiar with quite yet.
Do i make a new folder on my sd card and move the rom to that folder first?
Thanks a bunch~
Click to expand...
Click to collapse
As ztotherad said you need to read droidstyles guide.
As for using Roms, if you want Roms check the ones in the Verizon Note 2 Development and Original Development sections. Those are the only ones for our phones.
If you're going to flash a Touchwiz ROM you can flash Roms from the other Note 2's but only the LTE ones and then you have to use a patch to make them work. The Note 2 Roms from other carriers are only from specific phones though, the include the N7105, the AT&T version, the T-Mobile version, and maybe another. You have to use the patch with those though our else they will not work. You cannot however flash a ROM for the Nexus 7 or other devices unless it has been ported to our phone, in which case it would be in the Development section.
That being said it is very obvious that you don't know what you're doing yet, before you attempt to flash ANYTHING from another carrier you must know what you're doing and understand the ins and outs of modding and ROM flashing and the only way to do this is to read all the guides and if you don't understand something to ask questions in the Q&A section if you don't understand something or need clarification.
For the time being you only need to flash Roms from the Verizon Note 2 Development and Original Development Section and only after you have read droidstyles sticky that ztotherad posted above.
Verizon Note 2 Development Section:
http://forum.xda-developers.com/forumdisplay.php?f=1888
Verizon Note 2 Original Development Section:
http://forum.xda-developers.com/forumdisplay.php?f=1889
As I said, and everyone else has, you need to at least read droidstyles guide before doing ANYTHING.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
As ztotherad said you need to read droidstyles guide.
As for using Roms, if you want Roms check the ones in the Verizon Note 2 Development and Original Development sections. Those are the only ones for our phones.
If you're going to flash a Touchwiz ROM you can flash Roms from the other Note 2's but only the LTE ones and then you have to use a patch to make them work. The Note 2 Roms from other carriers are only from specific phones though, the include the N7105, the AT&T version, the T-Mobile version, and maybe another. You have to use the patch with those though our else they will not work. You cannot however flash a ROM for the Nexus 7 or other devices unless it has been ported to our phone, in which case it would be in the Development section.
That being said it is very obvious that you don't know what you're doing yet, before you attempt to flash ANYTHING from another carrier you must know what you're doing and understand the ins and outs of modding and ROM flashing and the only way to do this is to read all the guides and if you don't understand something to ask questions in the Q&A section if you don't understand something or need clarification.
For the time being you only need to flash Roms from the Verizon Note 2 Development and Original Development Section and only after you have read droidstyles sticky that ztotherad posted above.
Verizon Note 2 Development Section:
http://forum.xda-developers.com/forumdisplay.php?f=1888
Verizon Note 2 Original Development Section:
http://forum.xda-developers.com/forumdisplay.php?f=1889
As I said, and everyone else has, you need to at least read droidstyles guide before doing ANYTHING.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
yeah, believe me, you don't want to brick this phone, it's easy to mess up.
Thank you for the guides. So what I have done so far is ran casual to root it, flashed aokp nightly, then flashed gapps-jb-20130301-signed. From what people have advised me, I haven't done a proper flash. Next, I have read up on the the droidstyle guide [GUIDE][VZW Edition]How to Root/Rom/Return to Stock the VZW Galaxy Note II many times and still have questions.
I have access to team win recovery project by pressing up volume, power, and home button.
People have been suggesting that I take it easy step by doing the flash of the rom provided on the droidstyle guide, and I will follow those newbie steps first.
Could people verify if the following step will be ok to take?
Download one of the touchwiz jelly bean roms from Section 2: How to flash a Touchwiz 4.1.1 rom/kernel from a Custom Recovery. (I've decided to go with mean bean)
Download file, transfer file onto sd micro card, power device off, restart device by going into volume up + power + home button. select wipe, then wipe cache.
Select install, then select the rom. Then reboot system. Is that it? or...
Do I also follow How to flash a custom Touchwiz kernel, and section 3? Or are those extra?
Edit: Also, in the team win recovery project, do I only need to go to wipe, swipe to factory reset to erase the previous roms? What is a good way to wipe to start from scratch again before flashing the mean bean rom that I'm downloading? I don't really need anything else on the phone...
Thanks again~
tigersfa8 said:
Thank you for the guides. So what I have done so far is ran casual to root it, flashed aokp nightly, then flashed gapps-jb-20130301-signed. From what people have advised me, I haven't done a proper flash. Next, I have read up on the the droidstyle guide [GUIDE][VZW Edition]How to Root/Rom/Return to Stock the VZW Galaxy Note II many times and still have questions.
I have access to team win recovery project by pressing up volume, power, and home button.
People have been suggesting that I take it easy step by doing the flash of the rom provided on the droidstyle guide, and I will follow those newbie steps first.
Could people verify if the following step will be ok to take?
Download one of the touchwiz jelly bean roms from Section 2: How to flash a Touchwiz 4.1.1 rom/kernel from a Custom Recovery. (I've decided to go with mean bean)
Download file, transfer file onto sd micro card, power device off, restart device by going into volume up + power + home button. select wipe, then wipe cache.
Select install, then select the rom. Then reboot system. Is that it? or...
Do I also follow How to flash a custom Touchwiz kernel, and section 3? Or are those extra?
Edit: Also, in the team win recovery project, do I only need to go to wipe, swipe to factory reset to erase the previous roms? What is a good way to wipe to start from scratch again before flashing the mean bean rom that I'm downloading? I don't really need anything else on the phone...
Thanks again~
Click to expand...
Click to collapse
You hold power+volume up+home button to boot into TWRP. Then hit wipe.
At this point you have a couple options. You can simply swipe to factory reset.
If you have an external sd card, I like to move the rom (meanbeanice.zip) to the external. then i hit format data to completely wipe the internal sd.
Sent from my SCH-I605 using xda premium
So if I do an entire format data to completely wipe the internal sd, then flash go to install to install meanbean. I would have a clean new start with mean bean?
Yes, just make sure you hit the backup tab first to make a 'nandroid'. if anything goes wrong, you can boot into recovery and hit the restore tab to boot into the state of the phone as it was when you backed up.
Sent from my SCH-I605 using xda premium
I'll make the backup first. It will keep my team wiz recovery I'm assuming then?
For mean bean, I'll do the wipe, backup, then format data completely, install mean bean, go back and install sticky settings, go back and install sticky debloat to delete all the unwanted softwares? (Such as the nfl, amazon, and etc.)
Taking and reading how to properly flash one step at a time.~
Thanks everyone~
tigersfa8 said:
I'll make the backup first. It will keep my team wiz recovery I'm assuming then?
For mean bean, I'll do the wipe, backup, then format data completely, install mean bean, go back and install sticky settings, go back and install sticky debloat to delete all the unwanted softwares? (Such as the nfl, amazon, and etc.)
Taking and reading how to properly flash one step at a time.~
Thanks everyone~
Click to expand...
Click to collapse
you got everything right but you want to make a backup before you wipe anything..
Sent from my SCH-I605 using xda premium
I did everything above, but for some reason, nfl, amazon, kindle softwares showed up even though i did run the sticky debloat. Something I'm missing? I guess I can just diable them, but wondering if I missed a step for the future.
Thanks again~
tigersfa8 said:
I did everything above, but for some reason, nfl, amazon, kindle softwares showed up even though i did run the sticky debloat. Something I'm missing? I guess I can just diable them, but wondering if I missed a step for the future.
Thanks again~
Click to expand...
Click to collapse
Did you change the .blt file as explained in the OP of Mikey's thread? You have to edit that file then run the sticky debloat. It's unlikely that at this point you would have the experience to edit that file before flashing the ROM (please take no offense...) that's why I'm guessing that's your issue.
ztotherad said:
yeah, believe me, you don't want to brick this phone, it's easy to mess up.
Click to expand...
Click to collapse
It's actually one of the hardest to brick I have ever seen as long as you didn't update to VRAMC3, it seems like the minority of the issues come from phones with that update and is utterly puzzling. I'm just glad that I got my phone before *any* updates came out.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
It's actually one of the hardest to brick I have ever seen as long as you didn't update to VRAMC3, it seems like the minority of the issues come from phones with that update and is utterly puzzling. I'm just glad that I got my phone before *any* updates came out.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
yeah i believe before i bricked mine it was on the previous update, but this new one i have it's on the vramc3 update. i accepted it ota before i decided to unlock and root my phone.
ztotherad said:
yeah i believe before i bricked mine it was on the previous update, but this new one i have it's on the vramc3 update. i accepted it ota before i decided to unlock and root my phone.
Click to expand...
Click to collapse
I wonder why it seems like VRAMC3 is causing more issues, I know its 4.1.2 and has a new bootloader but is there a reason aside from that causing the issues.... It could also just be that more people are buying the Note 2 since the update.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
I wonder why it seems like VRAMC3 is causing more issues, I know its 4.1.2 and has a new bootloader but is there a reason aside from that causing the issues.... It could also just be that more people are buying the Note 2 since the update.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
oh who knows. but yeah, it could be, i wish Samsung would release 4.2.2, cause I'd be a super happy camper
ztotherad said:
oh who knows. but yeah, it could be, i wish Samsung would release 4.2.2, cause I'd be a super happy camper
Click to expand...
Click to collapse
Same here, hell if they would just leak it id be happy.
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Same here, hell if they would just leak it id be happy.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Love it on my S4
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
Do you have a custom recovery installed like TWRP or CWM? If you do all you need to do is download the rom (I put them on ext sd)....and gapps if your flashing cyanogen, boot into recovery, make a backup (I put this on my ext sd card too), wipe, flash rom, flash gapps and reboot.
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
Hi!
The first thing you need to find out is what build number you have. This will tell you if you are able to root and install recovery in order to put a new rom on the phone. Do NOT update your phone by the over the air update that is currently available! To find your build number go to settings: the more tab: about phone, then scroll down. If you have JDQ39.I545VRUAME7 then you are in the same boat as many of us and accidently did the upgrade which at this moment has no way to root. If you haven't done the upgrade than you need to find one of the many threads on here that will walk you through the process.
Hope this helps some, there are others on here that can give you a much more detailed walkthrough of how to root if you are on the correct older build.
The best advice I can give is to read the entire original post (OP) for the ROM you like, and as much of the thread as you can. 9 times out of 10 when someone has a problem with the ROM it's been discussed, and is often listed in the OP. Usually there are step by step instructions on installing the ROM. I believe there's a general ROM flashing guide in this forum somewhere as well.
Good luck and have fun :good:
Questions and help issues go in Q&A and Help section
Thread moved
FNM
shaddz said:
Hey folks.
The S4 is my first smartphone. Ever. I rooted it a few weeks ago and have been playing with different tools and utilities. I love the extra control it gives me.
Been using Smartlauncher Pro as my launcher as well, but it doesn't give me the customization I want. I dig the UI though, it's minimalist just the way I like.
I've been keeping my eye out for ROM's I can try out, and I think I want to try Cynogen for the S4. However, I am terrified of destroying my investment. I've read horror stories of flashes gone wrong... I don't want to permanently brick my device.
Is there anyone here who can hold my hand while I install my ROM? I seriously have no idea what I'm doing, instructions or no.
...I sound so pathetic right now.
Thanks folks.
Click to expand...
Click to collapse
You need to start reading, period.
srphoenix said:
Hi!
The first thing you need to find out is what build number you have. This will tell you if you are able to root and install recovery in order to put a new rom on the phone. Do NOT update your phone by the over the air update that is currently available! To find your build number go to settings: the more tab: about phone, then scroll down. If you have JDQ39.I545VRUAME7 then you are in the same boat as many of us and accidently did the upgrade which at this moment has no way to root. If you haven't done the upgrade than you need to find one of the many threads on here that will walk you through the process.
Hope this helps some, there are others on here that can give you a much more detailed walkthrough of how to root if you are on the correct older build.
Click to expand...
Click to collapse
JDQ39.I545VRUAMDK is the version I have. I froze the updater using Titanium a couple weeks ago... And my phone is already rooted.
shaddz said:
JDQ39.I545VRUAMDK is the version I have. I froze the updater using Titanium a couple weeks ago... And my phone is already rooted.
Click to expand...
Click to collapse
That's good! You haven't been updated which means you can still flash ROMs. Are you familiar with both types of ROMs, TouchWiz and AOSP? CyanogenMod is an AOSP ROM, which will be completely different from what you're running right now, TouchWiz. You're rooted, but have you installed a custom recovery? You need one to flash ROM's, either TWRP or CWM. You can also make a nandroid backup in recovery, and if anything goes wrong, you can go back to exactly how you are now. Definitely read the OP of the ROM thread multiple times and follow the flashing instructions correctly.
thesoldier said:
That's good! You haven't been updated which means you can still flash ROMs. Are you familiar with both types of ROMs, TouchWiz and AOSP? CyanogenMod is an AOSP ROM, which will be completely different from what you're running right now, TouchWiz. You're rooted, but have you installed a custom recovery? You need one to flash ROM's, either TWRP or CWM. You can also make a nandroid backup in recovery, and if anything goes wrong, you can go back to exactly how you are now. Definitely read the OP of the ROM thread multiple times and follow the flashing instructions correctly.
Click to expand...
Click to collapse
Okay, I just made a full phone backup using GooManager/TWRP.
Now for the next step...
shaddz said:
Okay, I just made a full phone backup using GooManager/TWRP.
Now for the next step...
Click to expand...
Click to collapse
If anything goes wrong with the flash in the next step, go to restore and you'll be back to how you are now.
Did you download the ROM to your phone along with Gapps? For AOSP Roms you need a separate gapps package, which is Google apps.
Sent from my SCH-I545 using Tapatalk 4 Beta
thesoldier said:
If anything goes wrong with the flash in the next step, go to restore and you'll be back to how you are now.
Did you download the ROM to your phone along with Gapps? For AOSP Roms you need a separate gapps package, which is Google apps.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I just started the download for gapps package using Goomanager.
I checked out the Cyanogenmod site, apparently there's no stable versions for the VZW GS4?
Oh wells, flash anyway! That's what I do!
Worst case scenario, you have to use Odin to get back to stock. I used to keep a nandroid on my PC for just in case scenarios as well. One time on my GNex I flashed something really bad and had to adb pull everything off my phone, wipe the whole thing, and start over.
Sent from my SCH-I545 using Tapatalk 4 Beta
jova33 said:
Oh wells, flash anyway! That's what I do!
Worst case scenario, you have to use Odin to get back to stock. I used to keep a nandroid on my PC for just in case scenarios as well. One time on my GNex I flashed something really bad and had to adb pull everything off my phone, wipe the whole thing, and start over.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Downloading the most recent nightly.
What do I do to get it on here?
shaddz said:
Downloading the most recent nightly.
What do I do to get it on here?
Click to expand...
Click to collapse
Yeah you'll have to download a nightly, I don't think there are any stable versions out yet. Are you downloading it directly on your phone? Or on your PC?
Sent from my SCH-I545 using Tapatalk 4 Beta
Thread cleaned of useless comments.
Thread is also closed - as XDA, even though full of helpful and nice people, is not a direct support site.
Users are expected to do some reading before they post and blatantly ask for hand holding. And, as you have seen, other users have a tendency to not be so nice and make trolling comments because of that.
This is a development site and is about development - so, please, study up first, then post questions based from what you have learned.
Hey,
I am about to get a new Kindle Fire HDX 8.9 64gb tomorrow and I'm already checking how to root the tablet and get all the Gapps up and running.
Unfortunately there are still a few things which are a little bit confusing for me at the moment:
1. Which is the best way to make sure that the Kindle Fire does not install an OTA update on its own? I mean it can not be the solution to keep the tablet in airplane mode all the time, that is ridiculous! I read about several ways to block OTA updates, installing a firewall, changing a value in the build.prop or renaming a certain file in den /system/ folder. Which way has to be proven to be the best way?
2. After gaining root I will install Safestrap and flash the official Amazon Rom to a slot. Is there a size for the Rom partition which is recommended? I have seen Safestrap now supports up to 16gb.
3. After booting the Amazon Rom from a Safestrap slot, can you do an OTA update or will this affect the whole system?
4. Can someone please point me to the correct and latest version Gapps for the 8.9" model (Apollo)?
I'm pretty sure I will come up with more questions tomorrow, but that's for now!
Thanks for your help ...
f2 said:
Hey,
I am about to get a new Kindle Fire HDX 8.9 64gb tomorrow and I'm already checking how to root the tablet and get all the Gapps up and running.
Unfortunately there are still a few things which are a little bit confusing for me at the moment:
1. Which is the best way to make sure that the Kindle Fire does not install an OTA update on its own? I mean it can not be the solution to keep the tablet in airplane mode all the time, that is ridiculous! I read about several ways to block OTA updates, installing a firewall, changing a value in the build.prop or renaming a certain file in den /system/ folder. Which way has to be proven to be the best way?
2. After gaining root I will install Safestrap and flash the official Amazon Rom to a slot. Is there a size for the Rom partition which is recommended? I have seen Safestrap now supports up to 16gb.
3. After booting the Amazon Rom from a Safestrap slot, can you do an OTA update or will this affect the whole system?
4. Can someone please point me to the correct and latest version Gapps for the 8.9" model (Apollo)?
I'm pretty sure I will come up with more questions tomorrow, but that's for now!
Thanks for your help ...
Click to expand...
Click to collapse
Welcome. Chances r u will receive the,or close to, the latest ota. That being said there currently is no root.. An earlier version of fire was rootable but quickly fixed by Amazon. We r all in same boat. For now spend the next couple days getting caught up on this forum while playing withbur new toy.
f2 said:
Hey,
1. Which is the best way to make sure that the Kindle Fire does not install an OTA update on its own? I mean it can not be the solution to keep the tablet in airplane mode all the time, that is ridiculous! I read about several ways to block OTA updates, installing a firewall, changing a value in the build.prop or renaming a certain file in den /system/ folder. Which way has to be proven to be the best way?
Click to expand...
Click to collapse
Once you complete the process to make dual-system (both Gapps and Amazon) the HDXposed module will block updates.
1
2. After gaining root I will install Safestrap and flash the official Amazon Rom to a slot. Is there a size for the Rom partition which is recommended? I have seen Safestrap now supports up to 16gb.
Click to expand...
Click to collapse
Personally, 6GB or 8GB. I currently use 4GB and it got a LITTLE crampy when I downloaded a couple videos from Coursera.
3. After booting the Amazon Rom from a Safestrap slot, can you do an OTA update or will this affect the whole system?
Click to expand...
Click to collapse
OTA will affect the whole system. Don't do it.
4. Can someone please point me to the correct and latest version Gapps for the 8.9" model (Apollo)?
Click to expand...
Click to collapse
Same place. http://forum.xda-developers.com/showthread.php?t=2665683
kschang said:
Same place. http://forum.xda-developers.com/showthread.php?t=2665683
Click to expand...
Click to collapse
Thanks for your help, @kschang! Unfortunately I could not find a link to Gapps in this thread. Would you mind pointing me to another direction?
Thanks again for your help ...
f2 said:
Thanks for your help, @kschang! Unfortunately I could not find a link to Gapps in this thread. Would you mind pointing me to another direction?
Thanks again for your help ...
Click to expand...
Click to collapse
It seems to be known the Xposed mod doesn't block updates. If you want the tab for the specs but also as close as possible to a stock android experience. I would recommend how I did it with SS on both stock and rom slot, airplane moding the stock slot and never going back there unless necessary. Also try to rename the files and if possible try to mod the build if you think fit.
Just my 0.02.
f2 said:
Thanks for your help, @kschang! Unfortunately I could not find a link to Gapps in this thread. Would you mind pointing me to another direction?.
Click to expand...
Click to collapse
I was pointing you to dual-use setup. If you don't want Amazon, it'd be this one:
http://forum.xda-developers.com/showthread.php?t=2585690
Thanks for all the help! After some back and forth I now have the most things working and it's a great device, but I still have one questions. Does Google+ work for anyone of you? As soon as I open the Google+ app it crashes immediately and goes back to the launcher. Did anyone have similar experience and knows how to fix that?
Thanks!
f2 said:
Thanks for all the help! After some back and forth I now have the most things working and it's a great device, but I still have one questions. Does Google+ work for anyone of you? As soon as I open the Google+ app it crashes immediately and goes back to the launcher. Did anyone have similar experience and knows how to fix that?
Thanks!
Click to expand...
Click to collapse
What ROM are you running?
icedtrip said:
What ROM are you running?
Click to expand...
Click to collapse
Amazon Stock rom 14.3.1.0
Sometimes it does that. Clear cache, restart device, try again.
kschang said:
Sometimes it does that. Clear cache, restart device, try again.
Click to expand...
Click to collapse
So you can confirm that Google+ works for you?
I asked this question on another board and everyone said it would not work for them ...
f2 said:
So you can confirm that Google+ works for you?
I asked this question on another board and everyone said it would not work for them ...
Click to expand...
Click to collapse
I can tell you that 4.3.1.63038142 works fine for me, on current HDX 7, older ROM, HDXposed and gapps and all the rest.
f2 said:
So you can confirm that Google+ works for you?
I asked this question on another board and everyone said it would not work for them ...
Click to expand...
Click to collapse
Same as kschang with same version of Google+ (latest version). HDX 7 with 13.3.1.0 firmware. It's run fine with Cpasjuste's ROMs (both the Thor Gapps and the AOSP ROMs) as well as stock ROM with Cpastjuste's Gapps zip installer.
Hi
I've also got HDX 8.9 14.3.1.0 Apollo. How did you get supersu installed?
I've got the UPDATE-SuperSU-v1.99r4.zip
The author recommends installing through Google Play.
But if I turn off airplane mode I'll get updated, so I can't do that.
Other option is to install supersu through CWM, TWRP or MobilOdin.
But they also require Google Play to install.
I'm on linux. What should I do?
read
aero1379 said:
Hi
I've also got HDX 8.9 14.3.1.0 Apollo. How did you get supersu installed?
I've got the UPDATE-SuperSU-v1.99r4.zip
The author recommends installing through Google Play.
But if I turn off airplane mode I'll get updated, so I can't do that.
Other option is to install supersu through CWM, TWRP or MobilOdin.
But they also require Google Play to install.
I'm on linux. What should I do?
Click to expand...
Click to collapse
Development sec..use plainly marked utility for everything
I mean Christ the best I can find is this: http://blog.julianxhokaxhiu.com/entry/how-to-install-supersu-on-hamlet-zelig-pad-210g
But he's got a custom install script. There's no install.sh file in the zip I got.
Some old threads look promising (http://forum.xda-developers.com/showthread.php?t=1410223) but will BurritoRoot or whatever worked on Kindle Fire 2 years ago work for Kindle Fire HDX 8.9 Apollo???
If you got all this working, it would be great if you could just unpack all the instructions you went through. No links and trying to be timeless lillypads for the future, just a detailed case study.
really...
aero1379 said:
I mean Christ the best I can find is this: http://blog.julianxhokaxhiu.com/entry/how-to-install-supersu-on-hamlet-zelig-pad-210g
But he's got a custom install script. There's no install.sh file in the zip I got.
Some old threads look promising (http://forum.xda-developers.com/showthread.php?t=1410223) but will BurritoRoot or whatever worked on Kindle Fire 2 years ago work for Kindle Fire HDX 8.9 Apollo???
If you got all this working, it would be great if you could just unpack all the instructions you went through. No links and trying to be timeless lillypads for the future, just a detailed case study.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2665683
jimyv said:
Development sec..use plainly marked utility for everything
Click to expand...
Click to collapse
I don't understand this at all. You were typing a sentence there, and then you started typing another one?
: )
aero1379 said:
I don't understand this at all. You were typing a sentence there, and then you started typing another
I was trying to point you to the development section. sec.... Being an abbreviation of section and etc.... Fourth topic down is a toolkit contains everything that you have just asked for. Hope http://forum.xda-developers.com/showthread.php?t=2665683 makes easier fot you. Thanksyou for visiting us here at xda have a GREAT day. ; )
Click to expand...
Click to collapse
There's only a Windows solution, but I guess beggars can't be choosers.
I got VBox to see the Kindle and just used the KFHDX ToolKit v0.91 toolkit.