[Q] Need some help on rom install - HTC Droid DNA

Hello All,
I've been rooting etc for a few years now, but last night I ran into my first snag I can't seem to get out of. I was attempting to install Viper 3.0, I had flashed in twrp2.6.3.0 beta like they said to do. Went through the wipe, etc installed and it failed. Message was along the lines of "Failed: Installer status 7." So i went through the process of trying to again, but now I'm stuck in Recovery or hboot/fastboot. I had to reinstall Windows 7 on a old hard drive because the whole Windows 8.1 thing doesn't work right. So I can see my phone in adb in WIndows 7. I've successfully pushed twrp2.5 to my phone, but I can do nothing else. I've tried sideload, but that won't work. At this point the main thing I'm trying to do is push an older ROM over to my phone to see if it installs correctly, but I can't seem to even push files in adb. Any help would be greatly appreciated on the matter, as I'm sure I'm overlooking something.
C

combsco said:
Hello All,
I've been rooting etc for a few years now, but last night I ran into my first snag I can't seem to get out of. I was attempting to install Viper 3.0, I had flashed in twrp2.6.3.0 beta like they said to do. Went through the wipe, etc installed and it failed. Message was along the lines of "Failed: Installer status 7." So i went through the process of trying to again, but now I'm stuck in Recovery or hboot/fastboot. I had to reinstall Windows 7 on a old hard drive because the whole Windows 8.1 thing doesn't work right. So I can see my phone in adb in WIndows 7. I've successfully pushed twrp2.5 to my phone, but I can do nothing else. I've tried sideload, but that won't work. At this point the main thing I'm trying to do is push an older ROM over to my phone to see if it installs correctly, but I can't seem to even push files in adb. Any help would be greatly appreciated on the matter, as I'm sure I'm overlooking something.
C
Click to expand...
Click to collapse
Put the phone in recovery mode and plug it into your PC, and make sure adb devices shows your serial number. Then you should be able to just run
adb push C:\path\to\your\rom.zip /sdcard/rom.zip
Then just find it in recovery and flash it

.torrented said:
Put the phone in recovery mode and plug it into your PC, and make sure adb devices shows your serial number. Then you should be able to just run
adb push C:\path\to\your\rom.zip /sdcard/rom.zip
Then just find it in recovery and flash it
Click to expand...
Click to collapse
It made the file location, I'm waiting to see if it finishes copying it, as it's just sitting still at the moment.

Got it to work. Mods, you can delete this thread.

Related

accidently formatted. no rom...need help!

Im faily new to the android world. please forgive me of any stupid questions that i may ask.
I was trying to reinstall a new version of maximus 7 on my htc one .
i had the CM 10 installed and was having wifi issues. read that i should clear data and what not and instead of doing a factory reset....i did a format...
now i have no rom on the phone and cant figure out how to do this.
ill upload a video on what i currently have going on...
when i plug it in to the computer...i head the noise from the computer saying that it connected..but nothing popped up.
please help.
heres the youtube video of whats going on with the phone. take a look and suggest any fixes . thanks.
youtube.com/watch?v=NCSJPpLuQiE
adb sideload. you should search this thread there are many that will help you
i searched what i could. didnt find much because im not familiar with terms much.
andrey64 said:
i searched what i could. didnt find much because im not familiar with terms much.
Click to expand...
Click to collapse
you should download all in one toolkit and use the sideload feature. read the on screen directions as you go through the process and you should have no problems
I also ran into a similar predicament a few days ago. I found adb push to be much easier than sideload. Make sure that your drivers and adb is installed on your PC (I assume Windows). In recovery mode, plug phone into USB and your PC should detect the phone but you won't be able to see phone contents; mine made a connection sound.
Then open a command prompt and type: adb push ROM.zip /data/media/ROM.zip
Rom.zip is the rom file that you want to flash, which should be in the same folder as adb. For the path, I used "/data/media" because the custom recovery defaults to that but you may be able to use "/sdcard" as well.
Then flash the rom using recovery

[Q] Impossible Rooting Polaroid PSPR355

Hello XDA community, this is my first thread, i had never needed to post anything cause i always find everything im searching for in this awesome community... until now :crying:
Last week I got a new android device which is made by Polaroid, model: PSPR355, its a pretty low class device but I thought it would be enough for me.... then i realize I needed root permissions, for obvious reasons... easy I thought... i had rooted many devices...how hard can it be...right?... WRONG! :crying: . The first problem I encountered were the drivers..couldnt find em anywhere... fortunatelly i found a tutorial were i could install the drivers in a different way...although I took 2 days to do this...Ive been about 5 days trying to root my phone.... Ive tryied about 10 different programs with their different versions... and any of those rooted my phone, nor Oneclikroot, nor Unlockroot, etc, etc..... I really gave up trying to find something on the web cause i didnt even find the phone on its official site, so I came her defeated asking for any solution, idea, or if you want to help me with commands, a programm or anything else to root my phone, Im not even afraid of trying programming (Im trying to learn how to make roms, kernels, etc for this phone cause theres nothing on the web abou it but this is a theme for another time) if you wanted to help me i would really appreciate it, im a little desperate so anything would come useful thanks everyone and I hoppe you can help me!!! :fingers-crossed:
MecaMarck said:
If you wanted to help me i would really appreciate it, im a little desperate so anything would come useful thanks everyone and I hoppe you can help me!!! :fingers-crossed:
Click to expand...
Click to collapse
I would recommend trying the towelroot application. It can be downloaded from here, just click on the orange lambda to download the tr.apk file. Then open towelroot follow the instructions in the application. After the device reboots I would recommend downloading, Root Checker Basic form the Play Store and running that to make sure your device is rooted. Finally install SuperSU, and you should be good to go.
First thanks for answering so fast shimp208! And I guess I forgot to tell that I was in Mexico and Im using Telcel's network, I downloaded and installed the apk file but it doesnt starts I click the button pops up a black screen and then closes to the last app I used...any idea about this error...or if its beacuse of the carrier, by the way the device has Android 2.3.7 I dont know if it has something to do with this error
MecaMarck said:
First thanks for answering so fast shimp208! And I guess I forgot to tell that I was in Mexico and Im using Telcel's network, I downloaded and installed the apk file but it doesnt starts I click the button pops up a black screen and then closes to the last app I used...any idea about this error...or if its beacuse of the carrier, by the way the device has Android 2.3.7 I dont know if it has something to do with this error
Click to expand...
Click to collapse
Does it present an error message of any kind before it force closes? Try uninstalling and then re-installing the application, and if that doesn't work go to application manger under settings, find the towelroot application and select the options to clear it's cache and data. The carrier won't have any effect in this case, and with it being Android 2.3.7 your device most definitely has a kernel build date before June 3rd, 2014.
shimp208 said:
Does it present an error message of any kind before it force closes? Try uninstalling and then re-installing the application, and if that doesn't work go to application manger under settings, find the towelroot application and select the options to clear it's cache and data. The carrier won't have any effect in this case, and with it being Android 2.3.7 your device most definitely has a kernel build date before June 3rd, 2014.
Click to expand...
Click to collapse
No it simply closes without showing anything, and without even giving the "Force Close" message, i thought it was because i first installed it on the sd card, or because of not enough space but no, I moved it to the phone and uninstalled some apps I had, I uninstalled and installed towelroot twice and it didnt work, I installed the v1 of it and i got to the [make it ra1n] screen but when I click the button it closes immediately again without any error message
MecaMarck said:
No it simply closes without showing anything, and without even giving the "Force Close" message, i thought it was because i first installed it on the sd card, or because of not enough space but no, I moved it to the phone and uninstalled some apps I had, I uninstalled and installed towelroot twice and it didnt work, I installed the v1 of it and i got to the [make it ra1n] screen but when I click the button it closes immediately again without any error message
Click to expand...
Click to collapse
Very interesting, while in theory the app should work for any kernel build date earlier then June 3rd, 2014 the app many not be compatible with devices running an Android version less then 4.x.
shimp208 said:
Very interesting, while in theory the app should work for any kernel build date earlier then June 3rd, 2014 the app many not be compatible with devices running an Android version less then 4.x.
Click to expand...
Click to collapse
Yes that´s what i thought, do you think that theres no rooting method for this phone? if so, do yo think there´s a way of doing one?
MecaMarck said:
Yes that´s what i thought, do you think that theres no rooting method for this phone? if so, do yo think there´s a way of doing one?
Click to expand...
Click to collapse
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Interesting for me.,.
Sent from my LT26w using xda premium
Same Boat
shimp208 said:
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Click to expand...
Click to collapse
I'm in the same boat
I use moto-fastboot (any way it's fastboot)
#:\moto-fastboot devices
? fastboot
don't show any info...
I do a system dump in this way
#:\adb pull / c:\PSPR355
mega,co,nz/#!ThIUQYiS!LLbJ9e1-yVJI4juNlWQuPfa9GFH6HP9lr4X8Gwu1MBY
Change "," please, sorry mod if you want i can delete it! =$
klonic0 said:
I'm in the same boat
I use moto-fastboot (any way it's fastboot)
#:\moto-fastboot devices
? fastboot
don't show any info...
I do a system dump in this way
#:\adb pull / c:\PSPR355
mega,co,nz/#!ThIUQYiS!LLbJ9e1-yVJI4juNlWQuPfa9GFH6HP9lr4X8Gwu1MBY
Change "," please, sorry mod if you want i can delete it! =$
Click to expand...
Click to collapse
Unfortunately if fastboot doesn't show your device without any other flashing utility, even with the system dump there is no way to flash a rooted system image if it was created.
Got to see if this guys do the trick!
http://forum.xda-developers.com/showthread.php?t=2066041
shimp208 said:
Since you have the usb drivers working on your computer, try booting into the bootloader and using fastboot to see if the command fastboot devices returns anything. If the computer see's the device in fastboot that's a good sign. If your device doesn't have a locked bootloader which it likely doesn't, then I can try and create a rooted system image for you to flash in fastboot. Provided fastboot see's your device if it does, if you can provide me an adb dump of your /system folder then I will see what can be done.
Click to expand...
Click to collapse
Hello shimp well I connected my device on FastBoot Mode and my computer recognized it and it installed a driver named: ADB Testing Interface I dont know if thats a good sign or what should I do, I tried entering into recovery mode but it shows only an android little guy and exclamation quote... so I think it doesnt have a recovery boot I dont know if thats relevant, Could you help with the adb dump i dont know how to get it. And.... I dont know if besides you help me with the rooted system image you could teach me how I do this.... anyways thanks a lot for helping me! I'll keep doing everything you need so we can root this device!
MecaMarck said:
Hello shimp well I connected my device on FastBoot Mode and my computer recognized it and it installed a driver named: ADB Testing Interface I dont know if thats a good sign or what should I do, I tried entering into recovery mode but it shows only an android little guy and exclamation quote... so I think it doesnt have a recovery boot I dont know if thats relevant, Could you help with the adb dump i dont know how to get it. And.... I dont know if besides you help me with the rooted system image you could teach me how I do this.... anyways thanks a lot for helping me! I'll keep doing everything you need so we can root this device!
Click to expand...
Click to collapse
Since your computer recognizes the device and installed the driver and shows the device when in fastboot mode that's a good sign. The Android with the exclamation point is part of normal stock Android system recovery, it just means that the recovery menu has been hidden (You should be able to get the menu to appear by pressing the power and both the volume buttons in recovery mode). To dump /system run the following command:
Code:
adb pull /system
Then please send me a link to the /system dump, from there I will make a rooted system image.
Factory Rooted??
Hey guys I'm new to this so I may be wrong but has anybody thought to check if the Polaroid PSPR355 comes Factory Rooted??? I had a Polaroid Tablet, PID something(I forget the name), which I tried for hours to root resulting in: bootloop, hard reset, root, bootloop, hard reset, root, bootloop, hard reset, about to give up. So I Googled how to root Polaroid PID something (again, I forget the name), and I come to a post somewhere(forgot that too) that tells me my Tablet and similar Polaroid electronic devices(as well as most electronic devices coming from China) are factory rooted due to some Chinese law. So after the last hard reset, I downloaded HowToRoot App to check if my Polaroid Tablet is, in fact, rooted. I press the little lock button(root checker) and I find that, to my surprise, my Polaroid Table is in fact rooted. So all I had to do was download SuperSU from Google Play Store and Update Binary when prompted and I was Super User. Don't know if this helps but it worked for me.

[Q] missing bitmaps & drivers on dis nabi 2 device specific help plz

Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Twink225 said:
Plz pardon my rant but I need major helpppppppppp lol, I've spent days scouring this site & google to try to fix this myself. I've built pc's but delayed learning droid because it's worse then mickersoft from what I've seen. I babysit for a lady raising her 3 granddaughters, they don't have net & were only able to access a few things. Sooo I volunteered to add some games, I was so flabbergasted at the bloat, shear greed and limitations of both versions of dis ui. I wanted to just disable it to use a different launcher but nooo to easy. no good deed goes unpunished lol. I updated the stock to the current as of two weeks ago ota kitkat and it went down hill fast, the dis ui worked for the most part but it wouldn't let me in the settings that's on the nabi mode for no apparent reason.
So not being able to find much current info for dis version, I made the huge mistake of using kingroots apk. it chocked but then work fine except I still had the above problem. no matter what I tried to clean or debloat. I got stupid tired and did a factory reset it now won't boot fully. I only get a pop up loop even in safe mode of nabiSetup has stopped. I can only turn off but can access recovery and the fastboot etc! I give it wins this round lol.
I have tried both win 10 32 & 64bit I only got it to connect once, it said I unlocked the bootloader but nothing can find the device to reboot-bootloader thru adb or NabiLab, 15 sec abd and etc. I'm to tired to think straight and to new to this so I must be missing something. there has to be away to get droid back on it! I can usually access the tablet and the sd card thru win explorer but no matter witch drivers I've tried it will not connect properly or the drivers won't install fully even with drive sig disabled. so it has to be because of the bitmap error I found in recovery or because it won't fully boot to access the usb on the tablet??
cliff-notes
1. the devise will not fully boot I get a nabiSetup has stopped popup loop in normal & safe mode I can only shut it off.
2a I can still get in recovery I tried to flash it but I assume I was using the wrong file nothing would load, but noticed E: missing bitmap stage_empty & stage_fill it seems to be a common droid problem but no info to be found for this devise version.
2b In the device manager fastboot comes and goes or I see a USB device descriptor failed or set address I think it was and pdanet stalls. I'm gonna fdisk laptop again it's had way to many driver attempts to be sure that's some of problem not operator error or usb in a mood again.
3. being brain-dead tired & a droid newbieish. I can't get to the usb to play nice so I can't install twrp. I assume because of the usb drivers ie google and etc not showing up right in device mangr. no usb on nabi which I just remembered the developer options vanished, that's why I decide to reset since what I think is the reset pinhole didn't work?
p.s I can access win explorer most of the time. the common droid/disney folders are showing but I'm unclear what all is missing.. can someone please give me a laymens clue how to get the os back on it. I deleted the cache and etc to no avail. I pieced together other peeps info here but so far I'm special no one has my exact errors lol. my gut says it's fixable from what I have read it seems to makes a difference its a disney version I don't care what's on it as long as it works at this point any ideas or help is deeply appreciated. I'm running win 10 ent 64bit at the moment and it was stock disney version of NABI2-NV7A-US-D with 4.4.1 before bad update of kitkat ota.
Click to expand...
Click to collapse
It's hard to understand all of that but it sounds like perhaps you deleted some bloat that you should have, you sound like having driver issues, and possibly wrong TWRP version. Need to clear that up and then reinstall the stock Disney ROM.
I'd start here it has all the tools/TWRP/ROM's you need.
http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
So sorry hun, toshiba is driving me nuts and I'm having a bad add moment or three lol. I read about you retiring. so I tried hard not to bother you. now I'm really confused. I've read your nabi2 general info post and even ran across your youtube vids. the problem is I'm not familiar with adb. & the included NabiLabGUI drivers, win10 either fails to finish saying it was interrupted. or it just won't install the 32 bit drivers, I thought I as suppose to use.
The 64bit driver 3 out of 4 install but, I can not get the Google Inc, driver to install properly even with the inf file. (ie the android_winusb.inf ) it says the system can't find the file, it can install the older versions from NabiLabGUI or naked drivers. but doesn't show in add/remove and it still won't detect the tablet most of the time lol.
Pda also has conflicts with adb, I got the nablab disney option to detect it but still failed to install twrp saying it can't find devise and I noticed in device manager 2 driver problems that will not let me update manually or they go missing if I try to force windows to reinstall. (device descriptor request & set address failed)
I must be missing something big, I also tried the 15sec and minimal adb. I assume because the tablet won't fully boot up, windows doesn't know what to do with it. when I tried different cables. windows 10 enterprise won't play nice at all now. so I will format again to be safe but lost what to try next.
I guess my questions should be is there a work around or a full inf version of the newer drivers for NabiLabGUI2015 that might work with this demonic disney nabi2.
&
Is NabiLabGUI compatible with .net framework 4.6 advanced services? (I may have to downgrade o/s. on the nabhacks site is says .net 4.5 is a prerequisites.) I don't know much about the app but saw 4.6 comes preinstalled, I can't install 4.5 yet, I saw there has been compatibility issues. and it won't let you revert versions easily if at all.
I'm to tired of this tab to think straight anymore and so grateful any help I'm in way over my head here.
Update
I lost the battle but I won the war, now google & supersu are messing with me as usual but it boots so I win lol :victory::silly:

Alcatel One Touch Pixi 7 9006w tmoble help

I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol

From bricked to custom ROM in 2019 (GUIDE)

Here you go:
https://1drv.ms/u/s!AshkuG2cY1T0xPZArSsy6iO1e_UnPw
This is a zip file with all the tools and files you need and instructions on how to use them.
What it covers:
Restoring bricked device (as long as download mode still works)
Unlocking bootloader (firmware dependent)
Rooting (any firmware)
Installing a custom recovery (any firmware)
Installing a custom ROM (any firmware)
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
robles4242 said:
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
Click to expand...
Click to collapse
Did you read my guide? You can't flash TWRP unless you successfully unlocked your bootloader with Casual, otherwise you are limited to SafeStrap. Also you can't restore with Kies, you have to use Odin and the files I've included to restore.
yambag said:
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
Click to expand...
Click to collapse
Nice to see people still looking for something like this, so my guide wasn't for nothing!
I was geeked to see this!! but then i got "This item might not exist or is no longer available"
I take it back.. i let it sit on the "failed" page for like 2 min, and randomly it popped up with a download!
Well the auto bootloader didn't work, so now i'm at the root section. However i'm getting an error where ADB isn't detecting my phone. USB debug is on, and i'm definitely in media mode and not installer. The phone shows up in windows and looks good, but adb doesnt detect. I opened command prompt and ran adb /? and found adb devices -l, and it reports "list of devices" and theres nothing in the list. I can't imagine why it's not seeing it. I tried turning on and off debug mode, switching from camera mode to media, changing usb ports. still nothing comes up, but windows sees it fine. grrrr
*edit, well since we can't delete posts i'll leave this here, because i have to. But what i did was re-open the "no you verizon" and it showed DISCONNECTED also. I changed usb ports like 3 times, turned usb debug on and off, changed from installer mode, to camera, to media mode, restarted the phone and the computer multiple times.. and then it just all of a sudden was detected again. So i went with it and it seems to have worked.
-it took 3 times to actually work, you noted it may take multiples, and it sure did. I ran it through the command prompt so i could read the text, and it took 5 times longer and reported much more stuff when it actually worked.
-final edit: if you can't unlock your bootloader, you're still stuck with ditto or alliance from 2014, and lots of apps won't update on android that old. So if you thought this guide was some holy grail, it is not. But still useful if you need the assist, so thanks to the author.
Hi, total noob here, I just bought Verizon note 2 at a yard sale but there is a pin I don't know. When I went to do a factory reset it booted into TWRP, so I am assuming is rooted. Do I need to be able to get into the phone to use your tools? I know nothing about TWRP. I would like to install a newer Android version and unlock it so I can use TMobile. Thanks
Something wrong...
when i try to load this file from the packages folder i get an error message:
"md5 error! Binary is invalid"
none of the other three works for me. they all come back ailed.
any suggestions?
awesome! thanks for posting this, just found my old note 2 and want to get it up and running again for the kids.
Kudos!
Used this to get my Note 2 up and going again temporarily until the Pixel 4a release...
NOTE: I had strange issues with Odin on my modern X570 board (USB 3.2 Gen 2) where I did not receive any errors, yet the process would randomly seem to time out. Sometimes I'd get stuck at flashing boot.img, sometimes it would hang up at the start, once I got to flashing system.img and it seemed to hang....
Used an older PC circa 2013, no issues! Not the first time I've had issues with this newer motherboard and older USB flashing interfaces; had the same issue on my Note 8 (RIP) as well.
excited to try this.
I'm on some rooted 4.4.2 stock-looking rom. Recovery doesn't look custom.
Hoping to be able to install a working Oreo or Pie ROM
great post, bought a couple of these for almost nothing and am having fun playing with them. sadly they are both 4.4.2 but its great fun anyway.
SilentNightx said:
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Click to expand...
Click to collapse
Thank you for sharing. Always difficult to find those tools after a few years!!!

Categories

Resources