Hello,
Here is my problem: Suddenly for no reason at all, the R earbud stopped working. My thought was: "Oh well, it happens with earphones", after that i bought some earphones without microphone which had much more clearer sound, and both of earbuds (R&L) worked well, untill few days ago, suddenly the right one (R), drop dead. I thought that it was again earphone problem, but I've tried to put them to my laptop, stereo, etc. and they worked just fine. So, I thought:"It must be audio jack problem". And it was, because now only left one works, and I must twist earphone plug in a strange way for both of earbuds to work but it is impossible to me to hold them all the time like that.
My brother has also galaxy S3, so I borrowed his original Samsung earphones and I didn't have to twist them or bend them. They just worked fine, both of earbuds. So I've done some searching over the internet and I've learned that it could be some contact problem in jack, that one contact is loose. My question is, how to fix that fast and cheap, because I'm cheap and lazy bastard. I would like to know if there is any solution to my problem so i won't have to go to Samsung service. I've seen that there are replacement parts for audio jack + speaker on eBay, any experiences with that?
Best regards!
Related
Hi all,
to my great frustration, I've discovered that my SGS2 line-out / headphones jack seems to have a slack joint, i.e. if you turn a connected plug around its long axis, a crackling sound is heared in the speakers and at some angular positions the stereo signal will be reduced to mono (i.e. one speaker gos silent). With one device (mobile outdoor speaker) I even had no sound at all at when inserting the plug with the wrong "orientation".
Did anybody experience the same problem or am I just out of luck here?
I am wondering whether sending back the device to the retailer (Amazon) or directly to Samsung (I'm situated in Germany) will yield the faster round-trip time, any experiences here?
Thanks!
PS: I know this may be a stupid question but can somebody PLEASE tell me how to search for multiple keywords with AND logic in this forum? Tried "+word +word" and "word AND word" (without the quotes) but nothing seems to work.
Are you using the headphones that came with it? My better half went through 4 sets of the stock samsung headphones with her original Galaxy S and all produced the same issue of losing one channel after a matter of days/weeks. having the jack inserted to about 2/3rds is a workaround but not ideal as you still lose some frequencies and it's insecure... They're just a bit pony.
No, I used different kind of headphones, including Sennheiser in-ear headphones and a standard male-male audio jack connected to some bigger hifi system. With some jacks I did not encounter the problem, but most of them lost some part of the signal with some orientations: I persume that the manufacturing tolerance of the jacks also plays a role...
Anyway, it's definitely not a problem of the jacks but of the device since I tried it with the SGS2 of a friend yesterday and it worked with the same jack that made problems with my device.
I will proceed sending my phone to Samsung for repair, I hope that won't take to long *sad looking*, I am so used to it now, it's card to survive to weeks without it.
I had the same problem, all I had to do was insert headphones cable "HARDER" into the audio jack until I herd a "click" sound.
I was way to over protective of this phone when i first had it, and wanted to handle too much with care, forced the dam cable in, and "click", sounded like it snapped into place, the audio worked correctly without cracking noise or without the need to wiggle to cable get clearer sound.
Perhaps your friends SGS2 is already used to headphone being inserted, but yours not. Just add a little pressure until you hear clip into place.
If this doesnt help, then repair or return.
Thanks for the hint, but unfortunately I had the jack inserted to the very end, so this was not the problem... sent in for repair now, let's see what happens.
I have a fix for you i think!!!!!!!!
ok . when i got my s2 like 4 days ago (at&t usa version) i noticed that when i plugged into my aux cable in my car that it was low sound cracking more volume on the left side , very annoying . NOW FOR A SIMPLE FIX FOR SOME TO TRY! PLUG IT IN ALL THE WAY! i noticed when plugging it in i wasnt fully plugging it in . it should go all the way down FULLY! the sound is perfect once this is done . I HOPE THIS HELPS YOU !!!!!! good luck
Hello Dear Xda,
I am having a very strange issue with the Audio Jack. When I got my phone I used samsung headphones and they seemed to have worked perfectly. Now when I tried using other headphones - i.e. the ones that work perfectly with my other devices, it simply wont register. I put the jack in, but nothing happens. the music keeps playing. I thought its only that headphone so I tried others, such as my Car's cassette adapter still the same issue arises.
Now I tried my mothers phone which is a Galaxy SL and it works perfectly with all the headphones that wont work for me. then I decided to squeez teh headphone a bit harder and turn it around in different directions and it started to work a bit, with terrible quality, but it worked. and if i hold it into a certain awkward position you could hear the sound almost flawlessly.
I have came to the conclusion that my jack might have a problem. But I am not aware how to fix the problem. Cause it works perfectly with some headphones, but it wont with others. Does this requires full change of the jack, or can it be fixed by readjusting it somehow?
inb4: I have restarted the phone several times, changed to factory setting and even changed rom to no avail, so this clearly is no software issue.
Thanks in advance
Replace jack. Should be YouTube videos around/Google search might reveal how to do it, but in all honesty, if you're not competent with microelectronics (like me), take it to someone who knows what they're doing (local mobile repair shop). Shouldn't be expensive to fix as the jack is a cheap part, main component of the fix will be labour.
EDIT: Moderators, please feel free to move this thread to the troubleshooting/Q&A forum. I didn't realize it might belong there... Sorry!
OK so I got a new HTC One and so far I love it in all aspects except... the following:
With a headset plugged in to the headphone jack (earbuds with in-line mic and button) any amount of jostling or rotation of the plug in the jack causes my phone to skip songs, stop playing music, and begin redialing the last call in my call log. This issue makes the phone practically unusable for listening to music, as even the slightest shaking of the plug (i.e. from phone in pocket while walking, movement of headphone cord from turning head left or right while sitting still, etc) causes problems.
I thought it was a problem with the individual device I got so T-Mobile was nice enough to send me a new HTC One...
And it has the exact same problem.
I have tried several different headsets with button and mic. Notably, all of the headsets with mic I've tried all work flawlessly on all other devices.
Has ANYONE had this problem?
Note that I Intend to record a video of the problem for evidence, but I'm pretty convinced its a design flaw in the HTC One.
At this point I have all intention to go with a different device, as much as that pains me to say (probably the Xperia Z)
EDIT2: After some experimentation, I have discovered the problem. It is a ridiculous design flaw on the part of HTC. I will post pictures later along with videos. In theory it can be remedied with a new set of headphones of a certain style or possibly some electrical tape or other insulating material, but I really don't think that should be a requirement of using the HTC One.
EDIT4: See here for my post on reddit with a description of what I believe to be the cause of this problem: http://www.reddit.com/r/htcone/comments/1k6ia1/illustration_of_a_design_flaw_with_the_htc_one/
And here is a link directly to the photo album on imgur with descriptive captions: http://imgur.com/a/uXvn3
i just picked up a set of ear bud n mic headphones today and played music and did voice commands with it today and had no issues but it was a short period of time...i will try to replicate ur issue and report back later today.
its a issue with something of htc software i believe. it was doing similar with my skullcandy ink'd second gens.
i looked into it a lil but not alot. but it seems only certain headset/earbud combos work properly. i really dont know why theyd have it like that. but for me i had to play around with the mic button and what not.
It's the head set I have earbuds and soul, soul works fine
Sent from my HTC One using Tapatalk 2
I've run into this problem on other phones before, but it was always the 3.5mm jack. Either it was tarnished or the case/jack design combo was causing it to not seat fully. Check very closely that the jack is fully seated and maybe try with another set before condemning the jack in the phone as bad.
I believe I have diagnosed the cause of this and other problems. Please see the OP for links to photo album with descriptions.
I purchased mine back in june and never had this problem. Ive used 2 pairs of headphones with the device (some $5 kyocera promo headset from when I worked at metropcs and a pair of Sony MDR-XB500). Only thing I could think of would be faulty software/hardware (phone jack) combination.
LifeEscalade said:
I purchased mine back in june and never had this problem.
Click to expand...
Click to collapse
yeah , it's right.
I have this very issue on my HTC one Since my wife's HTC one doesn't experience it with the same headphones I just concluded it was some tolerances that were off on mine I mainly use Bluetooth so I didn't feel it was a big enough issue to return. I had originally searched to see if it was a widespread issue, but could not find any others who had it.
I have not had the problem, either with a headset or an AUX cable I use for my car stereo. The headset jack on mine fits very snug and the plug does not touch the housing except maybe a very small area where the lip is metal.
Hello all,
So my girlfriend bought a fake S5 (yes yes, buying fake things ain't smart, but it works great apart from the music.. and the battery)
Well now, when she wants to listen to music, she plugs in her earbuds and what happens is that the vocals are like too low in volume, they are echoing or just at all not being played. Unless she holds the handsfree button (that button that lets you skip songs, pick up a call, etc.) the music is just messed up.
I tried her phone with my headphones (ofcourse doesn't have a handsfree button) and it works just perfect. We bought new earbuds without handsfree button and that just does the same thing as the headphones she already had.
Now, the guy that sold her this phone told us he bought it from here:
http://www.slmart.com/sdp/1258442/4...msung_galaxy_s5_mobile_phone_copy_cell_p.html
Maybe there's somebody here that can help with this issue? Maybe it's the software or just the hardware? I'm convinced it has something to do with the phone's software, but there is so little to be found about this phone that I figured I'd ask it here.
Thanks in advance for helping!:fingers-crossed:
Thread van be closed, it's a hardware probleme unfortunately. When I Tried it again today the sound played good when my cable was in a certain position, we've contacted the seller trying to discover if all phones have this problem.. If so we'll just gonna have tot accept it
Hello there.
Today I've noticed that the left speaker of my headphones doesn't work when I plug them to my Mini Pro. I moved from CM10.2 to SJB 8.0 and found this out while testing stuff out. It's been some time since I've used my phone as a music player last time, but I never had any problems like this. Reverting to CM didn't help either.
I can't really find out whether this is a hardware or software issue. I think connector isn't dirty, wiggling the plug doesnt make any difference. Is there anything more I can try, besides flashing stock firmware? Did anybody have a similar problem?
EDIT: I've connected my PC to the phone as a BT headset, both channels work fine there.
What headphone do you own? Most new headphones with mic won't work correctly on 2011 xperia. Those new headphones use CTIA, our phone uses OMTP. Long story short, you can only use stock headset or the ones without mic. You could buy OMTP to CTIA converter though. Look up on eBay.
fundre said:
What headphone do you own? Most new headphones with mic won't work correctly on 2011 xperia. Those new headphones use CTIA, our phone uses OMTP. Long story short, you can only use stock headset or the ones without mic. You could buy OMTP to CTIA converter though. Look up on eBay.
Click to expand...
Click to collapse
I use only standard stereo headsets, namely Creative Aurvana Live and Creative EP630.
They looked compatible to me. Maybe cleaning phone jack with alcohol would help, I don't know. Sorry
fundre said:
They looked compatible to me. Maybe cleaning phone jack with alcohol would help, I don't know. Sorry
Click to expand...
Click to collapse
Thanks for your input either way. I have tried cleaning the jack with isopropyl alcohol, and also just in case left the phone without battery for some time (because why not).
The strange thing about this is I'm getting absolutely no sound whatsoever on the left channel, while the right one works like a charm. If i'd get any noise while moving the jack around, it would be pretty obvious sign of bad soldering, and therefore a HW problem.
I still struggle with this problem. I have tried downgrading software to stock GB, didn't help. I've took it to some service centre, the folks there have replaced the jack, but it didn't help either. I wonder if i should pump any more money into this.