Well, after saving a long time, I finally got my s3 on amazon.com, when I opened it, it was new and beautiful, I powered it up, inserted my sim, and the phone freezed, after that I waited 2 minutes, and pulled out the battery, and tried to power it up again, but it got stuck at the yellow triangle saying to put it in download mode and use kies, I looked in the forum and found an Odin tutorial , downloaded all the neccessary tools, left the phone plugged to my USB port in download mode doing nothing, and went out fifteen minutes, when i came back decided to flash a new working rom onto my phone i founded the telephone completely dead, not responding to any key combination or cable connection to my pc, i thought it was the battery , charged it on my brothers phone and the phone was still dead,(i tested the battery for voltage and it delivered 3.7 v and 1500 maH, all correct and optimal values, I searched again and tried with a USB jig, trying to get into recovery mode, and it did not work either (the usb jig was allright, because it worked on my brothers phone, and on a friends Galaxy SII , so i do not know what else to do, and i ended posting here. What can i do? i will send it back to warranty , but maybe i can solve it first , Thanks!
Hardware bricked you can do nothing .
USB Jig is not for recovery mode .
If you have flashed your warranty may be void .
But also possible its SDS .
Sudden Death .
http://forum.xda-developers.com/showthread.php?t=2091045
JJEgan said:
Hardware bricked you can do nothing .
USB Jig is not for recovery mode .
If you have flashed your warranty may be void .
But also possible its SDS .
Sudden Death .
http://forum.xda-developers.com/showthread.php?t=2091045
Click to expand...
Click to collapse
usb jig is for download mode! i didnt flashed the phone, it got broken before giving time to use it even for an hour!
wowmauri said:
usb jig is for download mode!
CORRECT not recovery mode,
Flashing the original rom via Odin is your only chance .
Click to expand...
Click to collapse
but odin does not even recognize my phone now! how can i force the recongitiion?
wowmauri said:
but odin does not even recognize my phone now! how can i force the recongitiion?
Click to expand...
Click to collapse
Do you have latest Samsung drivers installed? And also try to run Odin as administrator if you're using Windows.
Related
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
So, I rooted my GS3 with this method http://www.youtube.com/watch?v=XoEVD...ure=plpp_video
Everything went perfectly and was successfully rooted.
I then made a backup of my phone.
I tried installing a rom and it had errors, so I restored my phone and it was successfully stored and hit restart phone.
Thats where I am at now. The phone shut off, and wont turn back on. I have it on the charger and there is no charging light, nothing. tried pulling the battery, entering recovery. Nothing works.
I have no idea what happened or how to get my phone back on.
Please help.
Thank you.
same problem
I have the same issue!!!! I cant start up my phone after following the procedure.
Can you get to download mode .
If not try a USB Jig to enter download mode .
Download mode flash stock rom .
No download mode require a paid for JTag repair .
jje
JJEgan said:
Can you get to download mode .
If not try a USB Jig to enter download mode .
Download mode flash stock rom .
No download mode require a paid for JTag repair .
jje
Click to expand...
Click to collapse
Does usb jig work on our s3? I'm gonna use my s2 jig tonight. Time to go to basement and find a jig...
☞ sent from my GS3
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
The story:
Got a phone with some software problems when calling from a spouse. Tried to update the ROM and it bricked.
Status:
endless loop of bootscreen
could enter recovery mode and boot CWR
can not enter download mode
unable to boot system
Tried endless guides and instructions with stock ROM's and firmwares. Some of them installed some didnt - none worked. Still in endless loop.
Gave up yesterday and went to bed to keep trying today.
Now its totally bricked.
- no recovery mode
- no download mode
- no boot screen
- cant connect to PC via USB (Odin wont recoqnize)
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
elisterr said:
The story:
Got a phone with some software problems when calling from a spouse. Tried to update the ROM and it bricked.
Status:
endless loop of bootscreen
could enter recovery mode and boot CWR
can not enter download mode
unable to boot system
Tried endless guides and instructions with stock ROM's and firmwares. Some of them installed some didnt - none worked. Still in endless loop.
Gave up yesterday and went to bed to keep trying today.
Now its totally bricked.
- no recovery mode
- no download mode
- no boot screen
- cant connect to PC via USB (Odin wont recoqnize)
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
Click to expand...
Click to collapse
You can try this guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Make sure to use the key combination of Download Mode for your device as the one mentioned in the guide is for Samsung Galaxy Ace S5830. If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
elisterr said:
The only sign of life - whatever I do it has black screen with backlight on but nothing else.
What can I do? They say that a broken phone is only with hardware problems but could I have f**** up the software so much that its the same?
Click to expand...
Click to collapse
1. make sure you have installed drivers on your computer
2. remove battery > connect phone to computer > press volume buttons and lock key
3. if you get a black screen just press the volume up button.
odin will recognize the device
if this does not work then try multi-formatter
using it, format rfs partition and then install some custom rom.
link to multi-formatter thread : click here
mahithm said:
You can try this guide by @SuperMini to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Make sure to use the key combination of Download Mode for your device as the one mentioned in the guide is for Samsung Galaxy Ace S5830. If that doesn't work, then you can try the USB Jig (not always guaranteed to work). If USB Jig did work, then it will force open the Download Mode so you can flash stock rom back using odin. If USB Jig doesn't work either, then your last option is to consult the Service Center. Do post the result. Hope I Helped
Click to expand...
Click to collapse
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
elisterr said:
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
Click to expand...
Click to collapse
Go to service center and tell them to flash mobile
Sent from my GT-S5830i using Tapatalk 2
elisterr said:
Well. Bought one from ebay. It finally arrived. Hoping for a miracle.
I connected it and.... Nothing. Absolutely nothing.
Click to expand...
Click to collapse
I'm sorry to hear that. Now as the last resort, you can consult the Service Centre.
Hi
I am having a samsung galaxy s3 i9300. i tried to upgrade my phone to marshmellow but ended in bricking my phone.i dont know whether its hard brick or soft brick............but this the condition,my phone doesn't start into any mode,nothing at all.all it does is that it shows red light while charging for like 5min.i searched the the internet for solution and found out that usb jig might be an option.will this work on my phone?...otherwise what other option do i have ?
Thanks for helping me out guys .
Silver hawk 555 said:
Hi
I am having a samsung galaxy s3 i9300. i tried to upgrade my phone to marshmellow but ended in bricking my phone.i dont know whether its hard brick or soft brick............but this the condition,my phone doesn't start into any mode,nothing at all.all it does is that it shows red light while charging for like 5min.i searched the the internet for solution and found out that usb jig might be an option.will this work on my phone?...otherwise what other option do i have ?
Thanks for helping me out guys .
Click to expand...
Click to collapse
If you mean when you try to start the device normally, in recovery or in download mode, nothing happens(black screen), then yes the next thing I would try is a usb jig. Without knowing the details of what exactly you did when you tried flashing the MM rom, it is impossible to know why you are in your situation.
For the usb jig, just try to have a fully charged battery before you start, pull the battery for 30 seconds or so, insert the battery, then insert the jig. Within a few seconds you should get download mode.
noppy22 said:
If you mean when you try to start the device normally, in recovery or in download mode, nothing happens(black screen), then yes the next thing I would try is a usb jig. Without knowing the details of what exactly you did when you tried flashing the MM rom, it is impossible to know why you are in your situation.
For the usb jig, just try to have a fully charged battery before you start, pull the battery for 30 seconds or so, insert the battery, then insert the jig. Within a few seconds you should get download mode.
Click to expand...
Click to collapse
Thanks for the help...... i really appreciate it.
Could it be that the battery has been drained? Leave it connected to a charger for a few hours to see if it charges up. Does it show the charging animation?
Nop...its not the battery.....
Sent from my GT-S7562 using XDA Free mobile app
audit13 said:
Could it be that the battery has been drained? Leave it connected to a charger for a few hours to see if it charges up. Does it show the charging animation?
Click to expand...
Click to collapse
If i remember correctly you can boot up without the battery, just on the charger alone.
Beamed in by telepathy.
hey there ...once more.i made a usb jig for my phone its of 300k ohm resiatance and tried it on my s3 but nothung happens.its not becuase of the jig...because it wirks on m
hey there ...once more.i made a usb jig for my phone its of 300k ohm resiatance and tried it on my s3 i9300 ,but nothung happens.its not becuase of the jig...because it works on my duos....so now what options do i have..
thanks for the help guys
Hi, my tablet SAMSUNG Galaxy tab 2 10.1 , had an error while installing the stock firmware with Odin. Now it shows:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I tried with kies: nothing, it won't recognise the tablet.
The problem is this: the tablet can't go on Download Mode! And can't power off until the battery is "out"
Is USB Jig good for this problem?
Open Odin, load the stock rom for your tablet, connect it to the computer, even if it is stuck on the "Firmware upgrade encountered....." screen, and flash it.