Hi.! Guys i really need help.! I Know There is a "NON - ZTE Blade" Thread in The ZTE Blade Forums for All The NON ZTE Devices (Obviously) But this need more Help than a Quick Reply and i Dont Know Where to put It.!
Well The Problem is.. i Got a ZTE Nubia Z5 ("2nd Hand") With a Software Camera Problem (I Think is a Software problems Because the Camera Works Sometimes), I Tried To Hard Reset the Phone But i Just Got a White Screen, And i Tried To enter in Recovery Mode And Get The Same White Screen (The Phone in ADB its Recognized as "NX501 Recovery" Normally is in "NX501 Device"), That means Something in The Recovery NAND or Something i Dont Know is Bad.!
(The Phone was Normally Working Fine, Since... My Brother Installed Chainfire 3D and is Stuck in the Boot Logo, Sounds Normal like is Entering in the OS (That music that sound when u Turn on a Phone) But Still Stuck on the Boot Logo, i Read is a Chainfire Problem in some Devices)
So I Start to try To Install Some Custom Recovery CWM, TWRP etc.! Was TOO HARD to find a Recovery Because ALL The Information you can find on the Internet about This Phone is in Chinese (i Dont know Chinese) And Some Russian Too (Dont know Russian to (lol))..
So i Found a TWRP Recovery (Also a CWM Too) But both in Chinse (I Dont care if is in Chinese).! So I Tried To Enter in Bootloader Mode To Install The Custom Recovery, Ok The Phone ENTERS in Bootloader (i Think so) The phone Gets on the Boot logo and get "Recognized" as a "Sooner ADB Device", but in ADB dont get Recognized, With ANY of the ADB Drivers, ADB Composite, ADB Interface etc.! So i Dont Know What to Do Now.! Looks Like the Bootloader is Blocked or Something.!
So i Hope Someone Here Can Help Me .!
(Sorry For my bad English) Cheers!
Seriously No One Here have a Clue.? Some Admin Can Move This to The More Appropiate Place.? :crying:
Bumb!
Related
HI
I have unfortunately flashed a rom from another phone (ZTE NUBIA Z5 mini), now my screen is black, but I can hear that the phone is working; sound when turn on/off phone and sound when I adjust sound level. I have tried to use fastboot mode, but phone will not boot into fastboot, only into ADB mode where my device are listed. Due to my “ROM” fault, USB debugging mode is not turned on, so many of the tools I have tried does not work. Is the phone totally bricked or is there some possibilities that I can try?? Help will be much appreciated.
ROM is root, when I did a test with ONECLICK root, tools tells me that phone is root, so something are working just not my screen.
PS I cant remove battery, it is built into the phone
Basmand
UPDATE: HELP PLEASE
By a luck I was able to install a new ROM "ZTE-nubia-Z5-cm-10.2-20140115-" but be course I didn't have any picture on the screen I may have touch the phone, because the rom is booting up, but don't work probably due to uncompleted install. Now I have picture on the screen, I can go to recovery and bootloader mode, but still no picture on the screen in these 2 modes. I can use adb but not fastboot maybe driver issue, I have tried nearly every driver on the internet including SDK manager tool.
So is there any change that I can flash via adb mode?
Basmand
basmand said:
HI
I have unfortunately flashed a rom from another phone (ZTE NUBIA Z5 mini), now my screen is black, but I can hear that the phone is working; sound when turn on/off phone and sound when I adjust sound level. I have tried to use fastboot mode, but phone will not boot into fastboot, only into ADB mode where my device are listed. Due to my “ROM” fault, USB debugging mode is not turned on, so many of the tools I have tried does not work. Is the phone totally bricked or is there some possibilities that I can try?? Help will be much appreciated.
ROM is root, when I did a test with ONECLICK root, tools tells me that phone is root, so something are working just not my screen.
PS I cant remove battery, it is built into the phone
Basmand
UPDATE: HELP PLEASE
By a luck I was able to install a new ROM "ZTE-nubia-Z5-cm-10.2-20140115-" but be course I didn't have any picture on the screen I may have touch the phone, because the rom is booting up, but don't work probably due to uncompleted install. Now I have picture on the screen, I can go to recovery and bootloader mode, but still no picture on the screen in these 2 modes. I can use adb but not fastboot maybe driver issue, I have tried nearly every driver on the internet including SDK manager tool.
So is there any change that I can flash via adb mode?
Basmand
Click to expand...
Click to collapse
Solved this problem? If not, write to the Skype oleg_gutov. I can help you
olezhek1975 said:
Solved this problem? If not, write to the Skype oleg_gutov. I can help you
Click to expand...
Click to collapse
Hi
Thanks for offering your help, my phone is still bricked! I have searched on Skype and there are more than one person with the name oleg_gutov
My Skype name is Michael.jensen123
Basmand
hello, sorry if I will open new threat but I am super lost... and sorry for my english.. I am from Slovenia... Yesterday I just root my lg g2 d802... But when I was wanted to install bootloader my phone write me some error... but this is not important because I was repaired in ubuntu with terminal.. so I am now stuck in TWRP bootloader... Whatever I want to do nothing is possible.. I was done everything... wipe, erase, hard reset reboot even writing codes in TWRP terminals... I cant get it fastboot because I always get same errors... When I am in cmd i write adb devices and I get some serial number and recovery mode... even if I try reboot bootloader I get same respond... I am without hope not... I was trying everything what I was see on the youtube and xda forums... I am now without options and with my precious phone stucked in twrp ... ohh yea one more thing... I have instaled all drivers and everything even adb universal drivers... my computer does not recognized my phone in download mode... please respond and help me saving my little precious :crying::crying:
Kdz installation with usb connected to the pc and flashtool _ easy way
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
I'm stuck with this problem too. The exact problem. Have you found a way to fix it?
I have exactly the same problem with my Huawei Tablet.
If I boot with the original ROM and look in the "/log" - directory with adb shell, there is a cust.log. The contents say, that the specific ROM is not original or factory.
I think even the bootloader is unlocked, there is a kind of signature checking.
EDIT: @Asdforcer: Have you tried to boot the original boot.rom with "fastboot boot" - command?
How to remove FRP on Huawei Y6 TIT U02
Hi,
Since I try to update firmware from HUAWEI website, my phone comes non stop booting (bootloop). Any one can help me how to fix my phone?
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Try to unlock your bootloader
Maybe I'm just stupid, but I have a weird problem.
So: I was at new bootloader and I wanted to install an old backup I made with old bootloader. So I searched on XDA for an instruction to install the old bootloader. I found this http://forum.xda-developers.com/oneplus-x/general/2-2-x-lollipop-bootloader-download-t3479948 and I flashed the second zip. I installed my old backup and there was just the oneplus Logo, without the powered by android text. I tried to boot into recovery and flash my newest OOS zip. - Buuut there was just the Oneplus Logo too. So I tried to manually boot into recovery with fastboot - buuut fastboot did not recognize it (I cant even boot into fastboot mode on phone). So I thought that I have maybe hardbricked it and I did the hardbricked guide - buuut my phone was not even recognized as the Qualcomm xxx or so. It was just nothing (and yes I checked my USB connection). So I have no idea what I have to do now. Thanks for your help and sorry for my bad english.
IchBinNoob said:
Maybe I'm just stupid, but I have a weird problem.
So: I was at new bootloader and I wanted to install an old backup I made with old bootloader. So I searched on XDA for an instruction to install the old bootloader. I found this http://forum.xda-developers.com/oneplus-x/general/2-2-x-lollipop-bootloader-download-t3479948 and I flashed the second zip. I installed my old backup and there was just the oneplus Logo, without the powered by android text. I tried to boot into recovery and flash my newest OOS zip. - Buuut there was just the Oneplus Logo too. So I tried to manually boot into recovery with fastboot - buuut fastboot did not recognize it (I cant even boot into fastboot mode on phone). So I thought that I have maybe hardbricked it and I did the hardbricked guide - buuut my phone was not even recognized as the Qualcomm xxx or so. It was just nothing (and yes I checked my USB connection). So I have no idea what I have to do now. Thanks for your help and sorry for my bad english.
Click to expand...
Click to collapse
If it's not recognized, search and ask in mega unbrick guide thread. U may find your answer there.
Hello everyone guys, i hope i write in the right section so don't get angry whit me if i don't.
Like i said in the title i have some troubles to make my first root ever on my LG G6 International (h870) let me explain better.
I have enabled developer permissions and enabled USB Debug and OEM Unlock, i have installed on my pc ADB and FASTBOOT and i have unlocked the BOOTLOADER and i have SUPERSU.ZIP in the memory of the phone and TWRP flashed in my phone but the problem starts here, after i going in recovery mode whit POWER BUTTON + VOLUME- and do all the process to start TWRP the phone shows me the TWRP image but it don't start and after few seconds it reboot into my normal android recovery.
i really apprecciate if some of you guys wanna help me out whit this.