I flash the recovery with the fastboot command. When I go into the recovery is shows either the teamwin or cwm screen, whichever I flash, then loops back to the HTC screen. Help!
booked said:
I flash the recovery with the fastboot command. When I go into the recovery is shows either the teamwin or cwm screen, whichever I flash, then loops back to the HTC screen. Help!
Click to expand...
Click to collapse
Go into boot loader and erase cache
Put the phone into fastboot mode open a command window and type fastboot erase cache and then try to flash the recovery and it will boot into it.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Jaggar345 said:
Put the phone into fastboot mode open a command window and type fastboot erase cache and then try to flash the recovery and it will boot into it.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
^ is what I meant
Related
I unlocked bootloader and successfully cwm recovery on it and it wont boot in cwm recovery mode any ideas?
Sent from my MB860 using XDA App
fastboot or zip
did you flash a zip for CWM or fastboot flash it? I had best results when I "fastboot flash ....." then "fastboot reboot" and held down volume immediately after the screen went blank..down to android recovery and up to boot into CWM..
I figured it out thnxs
Sent from my MB860 using XDA App
Going to sound nooby, but how do I flash a new recovery with s on?
Sent from my PG86100 using xda premium
xblackvalorx said:
Going to sound nooby, but how do I flash a new recovery with s on?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
have you atleast unlocked your bootloader is the first question...and if so easiest, do you have root access?... way i found to flash a recovery is like this:
have a fully charged battery
boot into your hboot screen and select fastboot
plug the phone into the computer with the data cable
once the phone is loaded open a terminal or ms-dos window
navigate to where you have the fastboot.exe command and make sure you have your new recovery as "recovery.img"
then type in fastboot flash recovery recovery.img
and then let it write it to your phone then unplug it and reboot into your new recovery
wloftus said:
have you atleast unlocked your bootloader is the first question...and if so easiest, do you have root access?... way i found to flash a recovery is like this:
have a fully charged battery
boot into your hboot screen and select fastboot
plug the phone into the computer with the data cable
once the phone is loaded open a terminal or ms-dos window
navigate to where you have the fastboot.exe command and make sure you have your new recovery as "recovery.img"
then type in fastboot flash recovery recovery.img
and then let it write it to your phone then unplug it and reboot into your new recovery
Click to expand...
Click to collapse
Yes I have, I'm on mean ROM ics, should have included that. And so, basically much alike how I boot into my recovery?
Sent from my PG86100 using xda premium
xblackvalorx said:
Yes I have, I'm on mean ROM ics, should have included that. And so, basically much alike how I boot into my recovery?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
first you have to write your recovery to that partition and like if you download teamwin recovery rename it to recovery.img etc....then you can boot into the new recovery
Code:
adb reboot bootloader
(This will reboot you into boot loader)
Then to flash recovery
Code:
fastboot flash recovery name.img
(Change "name" to the name of your recovery. )
Then you should be good.
Sent from my PG86100 using Tapatalk 2
iTzLOLtrain said:
Code:
adb reboot bootloader
(This will reboot you into boot loader)
Then to flash recovery
Code:
fastboot flash recovery name.img[code]
(Change "name" to the name of your recovery. )
Then you should be good.
Sent from my PG86100 using Tapatalk 2[/QUOTE]
Through fastboot usb?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
xblackvalorx said:
Through fastboot usb?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
yes....when your phone says fasboot usb in red go to the computer and type in
fastboot flash recovery recovery.img
itll say its sending data then writing data once that is done type in
fastboot reboot-bootloader
then select recovery and it should be your new recvery...if not private message me from a computer ill walk you through it all
wloftus said:
yes....when your phone says fasboot usb in red go to the computer and type in
fastboot flash recovery recovery.img
itll say its sending data then writing data once that is done type in
fastboot reboot-bootloader
then select recovery and it should be your new recvery...if not private message me from a computer ill walk you through it all
Click to expand...
Click to collapse
Thanks. Pretty sure I'll be able to do it, just wanted to make sure it was was the same folder for the command window.
Sent from my PG86100 using xda premium
If you are trying to flash 4ext, you can install the app and run it (see my signature). No need for adb.
Sent from my PG86100 using Tapatalk 2
I flashed neutrino rom 2.9 and google addon everything worked well. After that flashed all others adoons which are for the rom without boot after each fashing of addons and finally when tryded to boot it stayed on moto screen without booting. When tried to get into recovery but when entered just showed an empty screen and no further action. I tried a lot of times! When stays on moto screen it flashes moto screen and empty screen - when trying to boot.
I have no idea what to do.Tried to get in fastboot just to try something but could'n get into it as well.
Please help!!!
Does your PC recognize the phone at all through USB?
Sent from my MB860 using xda app-developers app
try to flash recovery one more time
fastboot devices
fastboot erase recovery
fastboot flash recovery recovery_name.img
ovitz said:
try to flash recovery one more time
fastboot devices
fastboot erase recovery
fastboot flash recovery recovery_name.img
Click to expand...
Click to collapse
I had a similar issue one time flashing neutrino, and reflashing recovery via fast boot like this worked for me.
Sent from my MB860 using xda app-developers app
JPBeard21 said:
Does your PC recognize the phone at all through USB?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think , doesn't recognize.when I plug usb phone start flashing moto screen and black screen , the same like pug in to the carger.
=JKT= said:
I had a similar issue one time flashing neutrino, and reflashing recovery via fast boot like this worked for me.
Sent from my MB860 using xda app-developers app[/QUOT
In cmd when type "fasboot devices" it says fastboot is not recognized like as un internal or external command, operable program or batch file
Click to expand...
Click to collapse
turankris said:
In cmd when type "fasboot devices" it says fastboot is not recognized like as un internal or external command, operable program or batch file
Click to expand...
Click to collapse
And what does that tell you?
To me it says you can't use something before you have it installed.
If you don't have your system PATH pointed to the fastboot executable, then you must run the commands from the folder where you have the fastboot file saved.
Sent from my Thunderbolt using xda app-developers app
Did you look here?
http://forum.xda-developers.com/showthread.php?t=1905222
I flashed a new recovery and everything went well. Thank you very much to ones helped me !:good:
Use Rom Manager for best results when backing/restoring...
USB OTG Info:
USB OTG will show up as external_sd. If external_sd is not mounting, reboot recovery. You must enter recovery with usb already inserted.
Installation:
Inscrutions can be found here @ http://www.techgeekal.com/2013/03/1...ckworkmod-touch-recovery-v6-0-2-8-on-htc-one/(outdated)
Unlock bootloader at http://www.htcdev.com/bootloader/
Make sure fastboot is unchecked in power options and turn phone completely off
Boot into HBOOT then Fastboot
From fastboot. Use command "fastboot erase cache"
From fastboot. Use command "fastboot flash recovery recovery.img"
OR
Flash via Rom Manager(must have root already).
Video Tutorials:
How To Unlock The Bootloader EASIEST Method - https://www.youtube.com/watch?v=r0gzJdwCxX0
How To ROOT EASIEST METHOD - https://www.youtube.com/watch?v=S1KmsxO84UU
Downloads:
You can now flash in Rom Manager in rom if rooted
Classic - http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.4.3-m7att.img
OR
Touch - http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.3-m7att.img
PC USB Mass Storage:
You can't! http://teamw.in/DataMedia
Mirror for files http://d-h.st/users/flyhalf205/?fld_id=11322#files or http://www.clockworkmod.com/rommanager
Thanks for this. :good:
How do you flash recovery on fastboot? Is this a cmd line I have to do with pc?
Sent from my HTC One using Tapatalk 2
rgoyena said:
How do you flash recovery on fastboot? Is this a cmd line I have to do with pc?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Yep. Open up cmd and navigate to fastboot then run rhe command or flash with the toolkit
Sent from my ADR6425LVW using Tapatalk 2
Flyhalf205 said:
Yep. Open up cmd and navigate to fastboot then run rhe command or flash with the toolkit
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Do you flash supersu in recovery for root?
Sent from my HTC One using Tapatalk 2
rgoyena said:
Do you flash supersu in recovery for root?
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Yep. That or superuser. Whichever one you prefer.
Sent from my ADR6425LVW using Tapatalk 2
CWM Touch is just flat out not working for me. I flash via fastboot, but when I try to reboot into recovery it fails and goes back to OS.
Hunt3r.j2 said:
CWM Touch is just flat out not working for me. I flash via fastboot, but when I try to reboot into recovery it fails and goes back to OS.
Click to expand...
Click to collapse
Make sire your turning phone completely off and boot into fastboot via power and volume down.
Sent from my ADR6425LVW using Tapatalk 2
Yep! Touch is working awesome for me!
I also had problems with the touch not working, so I switched to the non-touch version and it works fine.
i have the HTC one Dev edition. I just want someone to tell me that it's identical to the ATT version. AFAIK it is. I just want someone to confirm that for me before I go ahead flash the wrong thing and brick my phone
adityaksharma said:
i have the HTC one Dev edition. I just want someone to tell me that it's identical to the ATT version. AFAIK it is. I just want someone to confirm that for me before I go ahead flash the wrong thing and brick my phone
Click to expand...
Click to collapse
Flash away. It's fine. The dev edition is the same device as an unlocked 64 GB ATT phone
I have the device Bootloader unlocked and i
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
I get a successfully sent, however i am unable to boot into recovery via cmd or bootloader
Any ideas?
Thanks
Drew
drewdatrip said:
I have the device Bootloader unlocked and i I get a successfully sent, however i am unable to boot into recovery via cmd or bootloader
Any ideas?
Thanks
Drew
Click to expand...
Click to collapse
make sure Fast Boot is NOT selected in Settings/Power. Then turn the phone COMPLETELY OFF and boot to Hboot then fastboot and flash recovery again. Then power off and reboot to hboot. If it says *Tampered* at the top your all set, if it doesn't, then recovery didn't take. I had to flash recovery 6 or 8 times, but I think the deciding factor was when I turned fast boot off in Settings.
Ok. In order to flash a boot.img do we have to rename it to boot.img.zip ? I'm trying to completely understand how to flash the boot.img using HTC dumlock rather than having to use the computer all the time for fast boot.
Sent from my HTCONE using Xparent Blue Tapatalk 2
treIII said:
Ok. In order to flash a boot.img do we have to rename it to boot.img.zip ? I'm trying to completely understand how to flash the boot.img using HTC dumlock rather than having to use the computer all the time for fast boot.
Sent from my HTCONE using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
To flash a boot.img. You must enter fastboot on the phone. and issue the fastboot command fastboot flash boot boot.img using a computer.
For some reason, I cannot enter recovery. I get the entering recovery screen, then it boots back to the boot screen and freezes there. Gonna try to fastboot flash the recovery img
Sent from my HTC One using xda premium
cdordon said:
For some reason, I cannot enter recovery. I get the entering recovery screen, then it boots back to the boot screen and freezes there. Gonna try to fastboot flash the recovery img
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Fastboot erase cache, then retry fastboot flashing your recovery
Sent from my HTC One using Tapatalk 2
cdordon said:
For some reason, I cannot enter recovery. I get the entering recovery screen, then it boots back to the boot screen and freezes there. Gonna try to fastboot flash the recovery img
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Also Make sure fast boot is turned off in settings. Then cold boot into hboot then fastboot then flash.
Sent from my ADR6425LVW using Tapatalk 2
Is this exactly the same as the CWM Recovery in the international HTC One M7 forum?
Okay, so yesterday I was flashing from SlimBean to stock 4.3 on my Nexus 7. Okay, good no problem. After that I was using WugFresh's toolkit to update from 4.3-4.4 since my bootloader is unlocked and it wouldn't take the OTA. The cmd prompt said something akin to:
boot.sig not in archive
Recover.sig not in archive
And then it froze, for a bit before giving me the end message about the first reboot taking 5-10 minutes. OK, cool. I was still in fastboot mode, so I went ahead and volume upped to start. The Google image flashed, along with the unlock symbol, and in very tiny text at the top right says Booting Failed.... On the same screen off to the right is the arrow that says start, just like in bootloader. I'm freaking out because this is basically brand new, and I don't wanna NAFTA buy another.
Oh, and it's the 2012 Grouper/Nasaki WiFi only model.
Thanks in advance for any and all advice.
Sent from my GNEX running SlimBean
Just boot back to bootloader and flash a custom recovery through fastboot
Then boot back to this recovery and flash ROM of choice
If you want to go back to stock fully then drop the tool kits and just flash stock and relock bootloader
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Just boot back to bootloader and flash a custom recovery through fastboot
Then boot back to this recovery and flash ROM of choice
If you want to go back to stock fully then drop the tool kits and just flash stock and relock bootloader
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright I did that, erasing the non existent recovery as well. Now when I try to boot, its stuck at the Google logo. When I enter bootloader and select reboot recovery, it just goes to the screen with Google logo and the fastboot arrow
Sent from my GNEX running SlimBean
So through fastboot you ran
fastboot erase recovery
fastboot flash recovery recovery.img
And output said OK to both and the recovery you used was for grouper correct? The md5sum checked out right?
If so you may need to flash a factory image from google
https://developers.google.com/android/nexus/images
This time
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot update nameofupdate.zip
Oh and you may need to relock bootloader before update
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
So through fastboot you ran
fastboot erase recovery
fastboot flash recovery recovery.img
And output said OK to both and the recovery you used was for grouper correct? The md5sum checked out right?
If so you may need to flash a factory image from google
https://developers.google.com/android/nexus/images
This time
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot update nameofupdate.zip
Oh and you may need to relock bootloader before update
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright, so after i flashed the recovery, I attempted to boot into recovery. I am stuck at the google logo. But let me try the rest of the commands you gave me really quick.
Oh, and when I downloaded the factory image, I got a .tgz file, not a zip.
Sent from my GNEX running SlimBean
So the recovery.img you are flashing through fastboot says it worked but when you boot to it you get nothing? Is this correct? What recovery image are you flashing?
Can you try
fastboot boot recovery.img
Sent from my Nexus 7 using Tapatalk 2
Alright, I figured it out. The recovery was flashing right, but the file I had wouldn't stick for some reason. So I found the grouper TWRP .IMG file, flashed it, and it stayed. After that, it was as simple as pushing the file and flashing it all. Thank you so much for all of your help in this matter. Hope to see ya around the forums!!!
Sent from my Nexus 7 using xda app-developers app