Can't boot in cwm - Atrix 4G Q&A, Help & Troubleshooting

I unlocked bootloader and successfully cwm recovery on it and it wont boot in cwm recovery mode any ideas?
Sent from my MB860 using XDA App

fastboot or zip
did you flash a zip for CWM or fastboot flash it? I had best results when I "fastboot flash ....." then "fastboot reboot" and held down volume immediately after the screen went blank..down to android recovery and up to boot into CWM..

I figured it out thnxs
Sent from my MB860 using XDA App

Related

Flashing recovery hboot 1.5

Going to sound nooby, but how do I flash a new recovery with s on?
Sent from my PG86100 using xda premium
xblackvalorx said:
Going to sound nooby, but how do I flash a new recovery with s on?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
have you atleast unlocked your bootloader is the first question...and if so easiest, do you have root access?... way i found to flash a recovery is like this:
have a fully charged battery
boot into your hboot screen and select fastboot
plug the phone into the computer with the data cable
once the phone is loaded open a terminal or ms-dos window
navigate to where you have the fastboot.exe command and make sure you have your new recovery as "recovery.img"
then type in fastboot flash recovery recovery.img
and then let it write it to your phone then unplug it and reboot into your new recovery
wloftus said:
have you atleast unlocked your bootloader is the first question...and if so easiest, do you have root access?... way i found to flash a recovery is like this:
have a fully charged battery
boot into your hboot screen and select fastboot
plug the phone into the computer with the data cable
once the phone is loaded open a terminal or ms-dos window
navigate to where you have the fastboot.exe command and make sure you have your new recovery as "recovery.img"
then type in fastboot flash recovery recovery.img
and then let it write it to your phone then unplug it and reboot into your new recovery
Click to expand...
Click to collapse
Yes I have, I'm on mean ROM ics, should have included that. And so, basically much alike how I boot into my recovery?
Sent from my PG86100 using xda premium
xblackvalorx said:
Yes I have, I'm on mean ROM ics, should have included that. And so, basically much alike how I boot into my recovery?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
first you have to write your recovery to that partition and like if you download teamwin recovery rename it to recovery.img etc....then you can boot into the new recovery
Code:
adb reboot bootloader
(This will reboot you into boot loader)
Then to flash recovery
Code:
fastboot flash recovery name.img
(Change "name" to the name of your recovery. )
Then you should be good.
Sent from my PG86100 using Tapatalk 2
iTzLOLtrain said:
Code:
adb reboot bootloader
(This will reboot you into boot loader)
Then to flash recovery
Code:
fastboot flash recovery name.img[code]
(Change "name" to the name of your recovery. )
Then you should be good.
Sent from my PG86100 using Tapatalk 2[/QUOTE]
Through fastboot usb?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
xblackvalorx said:
Through fastboot usb?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
yes....when your phone says fasboot usb in red go to the computer and type in
fastboot flash recovery recovery.img
itll say its sending data then writing data once that is done type in
fastboot reboot-bootloader
then select recovery and it should be your new recvery...if not private message me from a computer ill walk you through it all
wloftus said:
yes....when your phone says fasboot usb in red go to the computer and type in
fastboot flash recovery recovery.img
itll say its sending data then writing data once that is done type in
fastboot reboot-bootloader
then select recovery and it should be your new recvery...if not private message me from a computer ill walk you through it all
Click to expand...
Click to collapse
Thanks. Pretty sure I'll be able to do it, just wanted to make sure it was was the same folder for the command window.
Sent from my PG86100 using xda premium
If you are trying to flash 4ext, you can install the app and run it (see my signature). No need for adb.
Sent from my PG86100 using Tapatalk 2

Cwm 5.0.2.7 Optimus V error

So a friend of mine asked me to see if I can help him fix his phone. He apparently used Rom Manager to download Cwm 5.0.2.7. Now he cannot select anything when the phone reboots because its stuck in Cwm 5.0.2.7. Is there a way to flash stock or a different recovery threw Emergency mode? That seems to be the only thing I can get into.
Thanks
Is it stuck in recovery (CWM 5.0.2.7)? If so try to flash amonra recovery via cwm
http://www.mediafire.com/?iwoygujg0qztoof
Hope I helped
Sent from my LG-P500 using xda premium
Ecuadude said:
Is it stuck in recovery (CWM 5.0.2.7)? If so try to flash amonra recovery via cwm
http://www.mediafire.com/?iwoygujg0qztoof
Hope I helped
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
thanks but there seems to be a problem. with this version of cwm you cant select an option in the menu. the cursor just disappears and it shows the cwm logo
Ecuadude you around?
Try to boot into Fastboot Mode and flash a new recovery. This guide is for the LG Optimus One, but it should work if you download a recovery for the Optimus V instead for the Optimus One:
http://forum.xda-developers.com/showthread.php?p=13972163
Here's how you boot into fastboot (only tested on Optimus One):
Press and hold the following keys until Fastboot mode appears:
HOME+Power
Another way to fix this is via flash_image using terminal emulator.
Type su
Make sure that the recovery u want to flash is on root of sd and it is named recovery.img.
Now type this:
flash_image recovery /sdcard/recovery.img
Sent from my LG-P500 using xda premium
You get some output and after that a #. It means that ur recovery.img has been flashed.
Sent from my LG-P500 using xda premium

[Q] nothing but bootloader what to do?

i was trying to update to kingcobra rom didnt back anything up it flashed successfully but now my phone is stuck at the boot up screen any help what to do???
Did you wipe before you flashed ? A lot of things could cause that.
Sent from my PG86100 using xda premium
Ah, you're S-on, correct?
Please read the thread for the ROM before you flash it.
If you're flashing that particular ROM and you're S-On, you must follow this to flash the boot.img.
Flashing the kernel using fastboot:
Reboot your phone into "fastboot" mode using the "Booting into Fastboot Mode" instructions
Connect the phone to the computer using the USB cable
Download this kernel to a folder on your computer (eg: c:\boot.img)
Flash the kernel using the command: "fastboot flash boot c:\boot.img"
Reboot your phone with the command "fastboot reboot"
Source: http://forum.xda-developers.com/showpost.php?p=25949202&postcount=3

Nexus 7 Meltdown

Okay, so yesterday I was flashing from SlimBean to stock 4.3 on my Nexus 7. Okay, good no problem. After that I was using WugFresh's toolkit to update from 4.3-4.4 since my bootloader is unlocked and it wouldn't take the OTA. The cmd prompt said something akin to:
boot.sig not in archive
Recover.sig not in archive
And then it froze, for a bit before giving me the end message about the first reboot taking 5-10 minutes. OK, cool. I was still in fastboot mode, so I went ahead and volume upped to start. The Google image flashed, along with the unlock symbol, and in very tiny text at the top right says Booting Failed.... On the same screen off to the right is the arrow that says start, just like in bootloader. I'm freaking out because this is basically brand new, and I don't wanna NAFTA buy another.
Oh, and it's the 2012 Grouper/Nasaki WiFi only model.
Thanks in advance for any and all advice.
Sent from my GNEX running SlimBean
Just boot back to bootloader and flash a custom recovery through fastboot
Then boot back to this recovery and flash ROM of choice
If you want to go back to stock fully then drop the tool kits and just flash stock and relock bootloader
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Just boot back to bootloader and flash a custom recovery through fastboot
Then boot back to this recovery and flash ROM of choice
If you want to go back to stock fully then drop the tool kits and just flash stock and relock bootloader
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright I did that, erasing the non existent recovery as well. Now when I try to boot, its stuck at the Google logo. When I enter bootloader and select reboot recovery, it just goes to the screen with Google logo and the fastboot arrow
Sent from my GNEX running SlimBean
So through fastboot you ran
fastboot erase recovery
fastboot flash recovery recovery.img
And output said OK to both and the recovery you used was for grouper correct? The md5sum checked out right?
If so you may need to flash a factory image from google
https://developers.google.com/android/nexus/images
This time
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot update nameofupdate.zip
Oh and you may need to relock bootloader before update
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
So through fastboot you ran
fastboot erase recovery
fastboot flash recovery recovery.img
And output said OK to both and the recovery you used was for grouper correct? The md5sum checked out right?
If so you may need to flash a factory image from google
https://developers.google.com/android/nexus/images
This time
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
fastboot update nameofupdate.zip
Oh and you may need to relock bootloader before update
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Alright, so after i flashed the recovery, I attempted to boot into recovery. I am stuck at the google logo. But let me try the rest of the commands you gave me really quick.
Oh, and when I downloaded the factory image, I got a .tgz file, not a zip.
Sent from my GNEX running SlimBean
So the recovery.img you are flashing through fastboot says it worked but when you boot to it you get nothing? Is this correct? What recovery image are you flashing?
Can you try
fastboot boot recovery.img
Sent from my Nexus 7 using Tapatalk 2
Alright, I figured it out. The recovery was flashing right, but the file I had wouldn't stick for some reason. So I found the grouper TWRP .IMG file, flashed it, and it stayed. After that, it was as simple as pushing the file and flashing it all. Thank you so much for all of your help in this matter. Hope to see ya around the forums!!!
Sent from my Nexus 7 using xda app-developers app

Cannot flash recovery

I flash the recovery with the fastboot command. When I go into the recovery is shows either the teamwin or cwm screen, whichever I flash, then loops back to the HTC screen. Help!
booked said:
I flash the recovery with the fastboot command. When I go into the recovery is shows either the teamwin or cwm screen, whichever I flash, then loops back to the HTC screen. Help!
Click to expand...
Click to collapse
Go into boot loader and erase cache
Put the phone into fastboot mode open a command window and type fastboot erase cache and then try to flash the recovery and it will boot into it.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Jaggar345 said:
Put the phone into fastboot mode open a command window and type fastboot erase cache and then try to flash the recovery and it will boot into it.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
^ is what I meant

Categories

Resources