Related
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
KevandLynds said:
I changed the USB cable and it sorted my problems. Needs to be official Samsung cable.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not actually true. It just needs to be a working micro USB cable. I use a generic micro USB cable (originally for a BlackBerry, I think) for all my flashing. Works fine.
this doesnt work guys, iv tried 3 different usb cables. nothing is happening it just wont connect. is it a way of installing a usb driver for my phone so it will reckonise my phone??
please help some one need help
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
blackgf said:
But you try reboot into download mode before connect to your pc?
vol- + menu + power off
Click to expand...
Click to collapse
Yes i tried all that with no luck i just cant get my phone connected to my laptoo if i could I
could unbrick
Check for Windoze updates if you're unable to get your PC & phone to recognise each other after trying the obvious (different USB ports, different cables, different versions of Odin, making sure Kies/its processes aren't running in Task Manager on PC. Try *all* of these).
This has solved the issue for a few people over the last week or so. Failing that, uninstall Kies from your PC, reboot, redownload it, reinstall it, reboot & try again.
If that doesn't work, try a different PC.
Bratcher123 said:
i have tried to flash a overclock kernal over cm9 via mobile odin my phone went strait into bootloop and wont go past the samsung s2 logo. it still goes into recovery and download but cwm has gone its on stock 3e?? i wiped everything and tried to reboot with no luck so now i found a thread to unbrick but i cant connect my phone to my laptop. says drivers not installed properly. having trouble just getting to recognize my phone. so i cant flash anything via odin because it just wont recognize please help its doing my nut it. its not even my phone either its the misses. haha she'll kill me now. i blinging a brand new gnote ;p
Click to expand...
Click to collapse
This method not required to connect your mobile to PC.
Just need external sdcard and ics based recovery
If you are ics recovery version , we can come from this issue.
1, download any ics ROM ( stock based ) and copy to your external sdcard.
2, root the mobile using this way
http://forum.xda-developers.com/showthread.php?t=1501719
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel
3, as per the above guide once you flashed cwm.zip , you will get cwm based recovery screen.
4, wipe system and cache
5, install the custom ROM from external sdcard
I believe this method will work for you.
All the best
Sent from my GT-I9100 using XDA
sendhiloo7 said:
I believe this method will work for you.
Click to expand...
Click to collapse
I believe it won't since he bricked his device and can't even start the phone.
Do what MistahBungle said + make sure that you install Kies first so that you have the proper drivers for Odin.
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
That's nice.
Now have you tried the other suggestions that have been made ? If your phone & PC can't/won't recognise each other, you need to fix that first. Forget about CW not working. It's not relevant. You're not going to fix this without an Odin flash and making that happen should be your focus/priority.
Bratcher123 said:
i have tried this methed. copied all the files on to the sd card, inserted back into the phone put into recovery but would not read external sd card only internal comes up????
Click to expand...
Click to collapse
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Might be. Try the (many) suggestions on the first page. Any one of those could be/resolve the problem. In addition to those suggestions, you can also try uninstalling Kies on your PC, rebooting, re-downloading it, reinstalling it, rebooting & then seeing if your PC & phone recognise each other.
But definitely try those other suggestions first.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
trell959 said:
This is definitely NOT a cable issue. I have the same problem, and i too was using Siyah. It's something with the kernel.
Click to expand...
Click to collapse
I use Siyah, and have no such problems.
crunchie-uk said:
I'm having the same issue today, i flashed the siyah kernel beta and now recovery doesn't work and phone stays on Samsung logo.
I can get into download mode but pc says unrecognised device . It was working fine a few days earlier.
Unfortunately my Samsung USB cable appears to have vanished too but I don't see why my other cable shouldn't work as long as it supports data? Maybe the cable is the issue though??
Click to expand...
Click to collapse
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
grungysquash said:
OK have had this problem, CWM is gone bye bye - bootloop, download recovery mode possible on phone but can't connect using Odin. Right??
See this thread
http://forum.xda-developers.com/showthread.php?t=1449771
You will need all the files, make sure Keis is not messing with Odin so check to make sure it's not running on the PC.
Have had this happen to me - keep the files safe and you will fix pretty much any brick u manage to do. Mine was in CM9 - dropped and battery fell out had to do the full repair job to fix.
Click to expand...
Click to collapse
That doesnt help as Odin doesnt recognise the phone in Download mode.
crunchie-uk said:
That doesnt help as Odin doesnt recognise the phone in Download mode.
Click to expand...
Click to collapse
+1 10char.....
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
AntAust1513 said:
If you have a memory card slot in your laptop, couldn't you take it out of your phone, put it in laptop. Download stock 2.3.5 firmware put it Back in then reboot into recovery and flash? Just an idea. Hope you find a solution soon!
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Well I thought of that, but none of us can get into recovery at all.
Sent from my SGH-I897 using XDA
Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
TheDarkTemptation said:
Hi everybody!
I'm actually running the MiniCM7 from nAa (version 2.2.1 with nAa kernel v.11) and I can't connect my phone to my PC anymore! Any PC displays the ''USB Slot not recognized'' and my phone won't display the ''Connect to your PC'' message in the notification bar. Any help please? Thanks a lot
TheDarkTemptation
Click to expand...
Click to collapse
1st make sure which one is the problem, is it from the phone or from the pc. have u try to put the cable in other usb port on your pc?
Try to re-flash your rom once again. If that is not working too, reboot your phone in cwm. make sure the cable is connected between your phone and the pc, then select mount and usb in cwm. select mount usb. see if this working for you.
<-----If i helped u
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
TheDarkTemptation said:
Thanks for your answer but I've already tried all those options... I'm deseperate now. :/
Click to expand...
Click to collapse
Does it charge when the USB cable is plugged in? E.g. does the phone state that it is recharging?
If in Windows, check if the device manager (Start Button > Right-click on Computer > Properties > Device Manager) still detects 'something' on the USB port, if you see a yellow exclamation mark, perhaps reinstall the drivers for your phone. (Flashtool comes with drivers IIRC). In any case, it might be worth a try to run SEUS with the phone disconnected, then it'll offer a 'repair' option, after which you must select your type of phone and connect it, hopefully the tool does not rely on the same driver. This would flash stock rom and stock kernel to your phone.
Should this fail, if your battery and WiFi still work, perhaps you can engineer a solution that downloads a new ROM over WiFi. You could upload it to your Google drive and download through the app or just use the internet browser. Then use a file manager like Root Explorer to move the files to the correct location on the SD-Card. Boot it into CWM and flash the new ROM and see if it helps.
Is the stock SE cable???, have you tried with another cable???
I have the same problem with the SE cable, my phone don't connect correctly with my PC, it disconnects automatically or never work...
Actually I'm using a Samsung cable for use the phone with my PC and works perfectly.
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Problem mounting usb on cm9 3.0.3
ponext said:
Actually u can try to take out the memory card and used card reader to other ROM beside that u used one. Then flash it. see how it going.
Click to expand...
Click to collapse
I have a similar issue with CM9....Everything was working fine untill 2 days ago the USB no longer mounts!! I can charge my phone but can mount the sd card..Tried reflashing the kernel,the rom and stuff its not working...Any help would be appreciated!!
:crying:
Thanks for all those answers but it doesn't work at all... I even buyed an official version of windows and a new usb cable, downloaded a new rom (XPM V.13) and tried to mount via CWM but that doesn't work! And I think I'll have to wait till November to get a new phone. FML.
Tried through a different computer?
speedsys said:
Tried through a different computer?
Click to expand...
Click to collapse
Already tried... 6 times.
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
x10man said:
Only some cables. Work on the MP. Samsung for sure. It might be the USB port, not the cable so you may be a Tad screwed. Sorry
X10man
Sent from my Fender Stratocaster to your face via XDA Premium
Click to expand...
Click to collapse
Thanks X10man, I've checked the inside of my X10 MP and the USB port is ****ed up. Gotta wait till november for a Xperia S Or a HTC. FML Again.
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app
today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help
rabea-abo-awad said:
today sammobile upload the new jb for sgs2 so i take my phone and go to -philz cmw- and do a full wipe with format to all the file in {mounts and storage} -like this i prepare my s2 to flash a new rom - everthing was ok but when go to download mode and connect the phone to pc and open odin .. nothing happen .. please help
Click to expand...
Click to collapse
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.
WardenBerret said:
Do you have Samsung Kies and all its necessary drivers installed?
*EDIT* Sorry, it seems like i didn't see your comment.
Click to expand...
Click to collapse
No problem mate, we posted at the exact same time! I see we think alike anyway.
??
themadba said:
Have you installed the Kies drivers on your computer? I'm not 100% sure, but I think you may need USB Debugging enabled too. Try these and then try again. Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
i have install kies Diligently nothing happend .. look in the pic
rabea-abo-awad said:
i have install kies Diligently nothing happend .. look in the pic
Click to expand...
Click to collapse
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.
no luck
themadba said:
Ok, try these steps I found on Microsoft's support website:
As all the hardware devices have drivers associated similarly USB devices also have it. Sometimes proper drivers do not get detected after the initial installation so reinstallation of the drivers helps resolve the issues.
You may check after uninstalling and reinstalling the USB drivers if you are able to connect. You may disconnect all USB devices and then perform the following steps:
1. Click Start, and then click Control Panel.
2. Click System and Maintenance, click System, and then click Device Manager.
* Note * If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
Check if at all there is an exclamation mark along the driver, it suggests issues with the driver installed.
4. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If you still face the same issue then you may check for the updated USB device drivers using windows update.
Click to expand...
Click to collapse
when i restart the pc and connect the phone thats what happend
rabea-abo-awad said:
when i restart the pc and connect the phone thats what happend
Click to expand...
Click to collapse
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Also try this:
1. Hold your phone and look at the micro USB connector on the bottom edge of your phone.
2. You will see a "tongue" inside the USB port.
3. Put something "non metalic" (I used a flat wooden toothpick) in the port. Gently, lift up the "tongue". I used a twirling motion on my toothpick to raise the tongue up a little bit. Don't go PRYING it up, just be gentle because you don't want to break your toothpick inside the phone or break the tongue.
no luck
themadba said:
Try a different Micro-USB cable if possible, and in different USB ports in your computer.
Click to expand...
Click to collapse
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them.
nothing happend
themadba said:
What do you mean in your original post that nothing happens in Odin? If you have Kies installed and the processes killed in the Task Manager, and your phone in download mode, just put your ROM in the PDA section of Odin, and click start. Does it fail, or does absolutely nothing happen?
Click to expand...
Click to collapse
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb
rabea-abo-awad said:
nothing happend on odin >> after i go to download mode and connect the phone to pc notthing happend even the pc Did not recognize him and make a sound like when we connect a usb
Click to expand...
Click to collapse
Maybe you didn't see my changed post on the last page:
HERE YOU GO: http://forum.xda-developers.com/showthread.php?t=961956/
Just download the drivers instead of waiting for Windows to find them!
ok
rabea-abo-awad said:
I have tried all ports and tried a different micro -usb - still not working ... i have to tell you something about the phone .. there is no rom inside him .. i told you i have delet the rom when a do for him format so he stuck at the logo is this help you more .. my english lunguge is bad
Click to expand...
Click to collapse
ok just a sec
This maybe?
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."
sorry sir
suenoromis said:
Open Task manager and kill Kies
If you don't know, follow these steps:
·Open Task manager, CTRL+SHIFT+ESC
·Go to "Processes" tab
·Select "Kies.exe" and click on "End process" located on the bottom right of that same window
·Repeat the previous step for "KiesAirMessage.exe" and "KiesPDLR.exe"
"People aren't lazy, people have impotent goals and therefore are not inspired by their impotent goals."
Click to expand...
Click to collapse
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time
rabea-abo-awad said:
i think that the problem in the phone himself i tried all of your Methods nothing changed thx for your time
Click to expand...
Click to collapse
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
thanks again
themadba said:
Did you try install the drivers I linked you to? It clearly isn't the phone it is your computer not finding the drivers! The previous poster suggested something I suggested ages ago and you thank him for that post, I have posted like 5 responses and you keep responding that nothing is working, and haven't thanked me for anything. I'll let you figure it out yourself, I'm done.
Just to refresh your memory, that was the second post: Remember to make sure you have killed all Kies related processes from your Task Manager before using Odin, as it could potentially mess up the flashing process.
Click to expand...
Click to collapse
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot
rabea-abo-awad said:
thanks again .. the info you have give it to me is so helpful i will try it again but Later cause i have to sleep no Tomorrow thx alot
Click to expand...
Click to collapse
Might wanna try another computer.
Samsung usb cable or generic?
gastonw said:
Might wanna try another computer.
Samsung usb cable or generic?
Click to expand...
Click to collapse
I tried alots of cables nothing happened .. but I will try another computer today .. i hope this will work
good luck.
Sent from the little guy
Hi to all!
Since yesterday, my PC which is running W8 gave an error whenever i tried to connect my xperia mini to my PC. 'USB device not recognized'. I was running CM 10.1 and a new update was available so i tried to flash it. Flashed it successfully and then the network was gone so, what i did was flash back to CM 9.1. Here the problem occurred. My PC is not recognizing my phone. I tried flashing the kernel with flash tool and followed this :- http://forum.xda-developers.com/showthread.php?t=2095087 Still nothing. Connected it to another laptop running windows 8. Even that didn't work so i connected my phone to my dad's laptop running windows 7. I was somehow able to flash kernel at first but then the same error there too! Tried 3 different PC's and i'm not able to solve this issue! Please help!
as you have a custom kernel on device,try accessing CWM and installing the stock ROM,then install CM again..
btw did you check the CM10.1 page for any bugs..?
a|\|droid_user said:
as you have a kernel on device,access CWM and try installing the stock ROM,then install CWM again..
Click to expand...
Click to collapse
Tried 2 different ROM's on the same kernel. Nothing happens. I get the same error each time! Also now my ear-piece won't work too (In both the ROM's i flashed) :'(
I also noticed that using Win XP, i can connect MSC to my PC and copy/paste items. But as soon i go into fastboot mode, it gives me the error!
Edit: I have used CM 10.1 before with no bugs. This started happening only yesterday!
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Gamertroid said:
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Click to expand...
Click to collapse
I have everything installed! Right now i'm on XP. Even it doesn't recognize my phone in fastboot mode!
check device manager..
when you connect your xperia..what does it show ?
try updating the driver by manual selection...
if that doesnt work..
open flashtool..
check the logs when you connect your xperia..
-DELETE-
I somehow managed to connect it to flashhtool in flash mode! Now i'm flashing .42 ftf file to use my device somehow with 0 bugs/glitches. It is taking forever to do so! See the attachment!
Any other way to flash ftf file?
Thank you
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Is your computer detecting any other xperia device,or an iphone...?
check if your micro usb port is damaged...
Sent from my WT19i using xda app-developers app
ishanbhatnagr96 said:
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Click to expand...
Click to collapse
Goto flashtool/drivers/ and install drivers and check...
a|\|droid_user said:
Is your computer detecting any other xperia device,or an iphone...?
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
It is detecting my pendrive, my hard-drive and my nexus!
Edit: Tested on 3 laptops each running:- Win8 and other two Win7. Also, tested on 1 PC (dual-booted with XP and Win8) Same result in all of them.
Is SEUS detecting the phone?
Try changing connection modes on the phone...
if not..flash stock kernel
get me a screenshot of flashtool logs for check drivers option..
its here help->check drivers..
Solved (I guess)
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
Maybe its the prob with ports, others reported it not working with usb3.
Regards
-N
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
well,why dont try reinstalling your usb controller drivers to see if the front port is workin?...
otherwise if you are done with this problem...change the topic to RESOLVED..