I tried to root my S3 L9305T following instructions from here:
redmondpieDOTcom/root-galaxy-s3-on-android-4.1.2-how-to-tutorial
However, now Odin says "PASS!" and my device is stuck on the "Downloading... Do not turn off target!!" screen. There is no odin writing or anything in the top left like when you enter download mode.
I live in Australia and my provider is Vodafone
Please help, i really need to fix this as soon as possible :crying:
i think u used wrong files
head over to sammobile download stock rom and flashed with odin
This is not I9305 Q&A.
Root please read the sticky faqs and guides or ask those who supplied your root file .
Can you download a recovery .tar and then transfer a ROM to your phone and flash it ?
Andr3y29 said:
Can you download a recovery .tar and then transfer a ROM to your phone and flash it ?
Click to expand...
Click to collapse
Sorry, i have no idea how to do that. I'm in this situation because i jumped into things without knowing enough.
I'm trying to download a stock rom from sammobile, however i wont be able to connect to my carrier will i? They only have a Telstra rom and I'm with Vodafone
kaitur8 said:
Sorry, i have no idea how to do that. I'm in this situation because i jumped into things without knowing enough.
I'm trying to download a stock rom from sammobile, however i wont be able to connect to my carrier will i? They only have a Telstra rom and I'm with Vodafone
Click to expand...
Click to collapse
Download this: http://techerrata.com/file/twrp2/i9305T/openrecovery-twrp-2.6.3.0-i9305T.tar . Open Odin, connect the p[hone in "Download mode" , click Pd, and choose this file. then click start. because you have no OS, I think it will boot straight to TWRP. If not, open yourself by holding Volume UP+Power+Home at the same time. And about the arrier, I don't think it will be a problem. Just in case your phone brakesa nd you want to take to a service, it may detect that you changed the software(Even if it is an original one from SamMobile). But this cases are very rare. Except that, you will be able to use your phone normally just as you did until now !
You have I9305T ???
This is I9300 forum not for your phone please do not flash I9300 firmware .
There are two non Telstra roms listed on sammobile for GT-I9305T
GT-I9305T Australia 2013 February
I9305TDVBMB1 I9305TXSABMB2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GT-I9305T Australia 2013 January 4.1.2 I9305TDVBMA2 I9305TXSABMA4
Related
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA
FIXED: My own stupid. I also have a SGS2 and was using the wrong image as they a named similarly and reside in the same folder.
Hi all,
I wanted to flash teh stock Firmware to my S3 and Odin hangs at NAND Write Start.
Phone: Galaxy S3 International Version
Carrier: O2 Germany
What I have done before:
1. I was tired of waiting for OTA updates by my Carrier so I went to samfirmware.com and flashed the latest Firmware they had for my Phone (German Open; XXALF6). - No Problems
2. Since I like root, I flashed CF 6.4.
3. I installed TriangleAway and reset the flash counter.
Thats it, no further modifications.
Now, since my CSC actually seems able to deliver OTA updates and I want them, I decided to get the original Firmware from samfirmware for my CSC (XXALE8). But when I try to flash it via Odin, it hangs at "NAND Write Start" without any progress.
When I get bored and simply disconnect the USB cable, this does not hurt the phone, but i want the original Firmware on my phone again.
Any suggestions? I am open for anything but would prefer if it didn't involve wiping/factory resetting the phone.
Galaxy I9300
Android 4.0.4 Stock with CF 6.4
Baseband: I9300XXLF5
Kernel: 3.0.15-705505-user [email protected] #1
Buildnumber: IMM76D.I9300XXALF6
Cheers,
Ape
Post screenshot please
Sent from my Galaxy SIII
This should be in Q&A
Sent from the asylum
Something going on ??? with all these broken Nand posts .
jje
JJEgan said:
Something going on ??? with all these broken Nand posts .
jje
Click to expand...
Click to collapse
Yea, there seems to be a lot of them, wonder what's causing it...
Here's a screenshot.
PS: I'm using Odin3 1.85. Should I use a different version?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: as you can see in the picture, I am an idiot for trying to flash an SGS2 ROM to an SGS3.
primedape said:
Here's a screenshot.
PS: I'm using Odin3 1.85. Should I use a different version?
Edit: as you can see in the picture, I am an idiot for trying to flash an SGS2 ROM to an SGS3.
Click to expand...
Click to collapse
i have the same problem
how you solve your problem ??
Eng.MohamedFathy said:
i have the same problem
how you solve your problem ??
Click to expand...
Click to collapse
Seriously?
primedape said:
FIXED: My own stupid. I also have a SGS2 and was using the wrong image as they a named similarly and reside in the same folder.
Click to expand...
Click to collapse
hi guys :good:
iam have GALAXY s III
MODEL:GT-I9300
i try to download European rom and not downloading :crying:
and turn on my device >>>still in show "samsung galaxy s III GT-9300"
how can repair my phone ??
in any way>> i will do
please help me
Boot into recovery, wipe data/factory reset
Sent from my GT-I9300 using xda premium
copra11 said:
hi guys :good:
iam have GALAXY s III
MODEL:GT-I9300
i try to download European rom and not downloading :crying:
and turn on my device >>>still in show "samsung galaxy s III GT-9300"
how can repair my phone ??
in any way>> i will do
please help me
Click to expand...
Click to collapse
Have you tried a hard reset? I guess you have rooted your phone? I'm sorry, but I'm not familiar with your problem. I do not know if it's up to rom or cw, maybe you should reinstall CVM via Odin's,then try to install some custom rom.
ok ......thanks for all
iam not have Options in recovery and not have any rom know
iam want flash new kernel and rom from computer via odin or any program ..... please i want how to do it
in my device in recovery i have two option :
up-volume to download ____if we choice not download
down-volume to cancel
As you don't understand the basics i would read before bricking your phone .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what i doing??
it will display samsung galaxy s III GT-9300 no matter which rom you will flash on it , other than that post link of the rom you are trying to flash because i have a feeling you are trying to flash a wrong version of the rom and end up hard bricking the phone
copra11 said:
what i doing??
Click to expand...
Click to collapse
Failing to read/understand the basics .
Looks like you have no PIT . Why ////// who knows what you have done .
First question is what model phone and what firmware .
jje
Remove battery.
Put it back.
Go to Odin mode (volume down + home + power)
Open Odin
Flash the .md5 file on PDA in Odin. Make sure you unzip the file you downloaded from sammobile.com
Sent from my GT-I9300 using xda premium
guys i tryed to root my device first i used a local turkish site and succesfully installed recovert but it didnt installed supersu. it said veritifaction failed or something like that idk.
then i saw this on here
http://forum.xda-developers.com/showthread.php?t=2355680
well it says supersu comes with it so i tryed to flash this. now my device not booting but i can reach download mode.
what i must do?
here is what happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well it was a quick shot from my note 4 but still explains the problem. phone stays like this with blue led flashing after i heard samsung boot sound. i tryed to flash old recovert first i used but it also didnt worked.
update: i cant reach recovery...
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
trurl3 said:
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
Click to expand...
Click to collapse
well i already tryed battery trick. i found stock rom (1.3gb from internet) downloading now. if i flash that will it fix it?
and no i dont have a backup
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
trurl3 said:
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
Click to expand...
Click to collapse
thx for help dude i fixed it.
there is 3 different model in turkey i found the correct one.
but i was scared when first one didnt worked
Hello! I badly NEEDED your help guys!
My Device is Samsung Galaxy S3 GT-I9300.
I have installed a new firmware, its android version is 4.3 and an open line version for Philippines.
But it can't make and can't receive call and sms. (I have tested all the 4.3 version that is open line from sammobile.com, but it didn't work to my carrier)
The only solution I think is to flash a new modem, or to bring it back to its default stockrom which is 4.1.2(this device is bought from Israel, but it works to our carriers in the Philippines.)
The picture below is the screenshot of my device before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please HELP me, any help that makes the possible solution is MUCH appreciated.
Please HELP me, I really NEED you assistance please.
@jphilip04: is IMEI, showed in settings, the same as shown on the label under battery?
@rp158, yes sir, they were the same. What should I do now? Please.
@jphilip04: go back to your last firmware with working net access (with Odin). If everythings works fine there, let it update to 4.3 by KIES. If you still have net access, try to install your Phillipines-firmware.
rp158 said:
@jphilip04: go back to your last firmware with working net access (with Odin). If everythings works fine there, let it update to 4.3 by KIES. If you still have net access, try to install your Phillipines-firmware.
Click to expand...
Click to collapse
@rp158, The problem is, I can't find the default firmware from sammobile.com. Because my device was bought from Israel. I tried to search it on google, but theres' no link that can direct me to download the exact firmware with the exact modem version.
But before I did anything on my device, I also did a nandroid backup to my default firmware thru TWRP recovery .
@jphilip04: I find on sammobile.com Israel-EMC2-build. So what?
rp158 said:
@jphilip04: I find on sammobile.com Israel-EMC2-build. So what?
Click to expand...
Click to collapse
@rp158 And what about the baseband version? Is it I9300JKEMC1 too? because I can't find the firmware with the same BASEBAND VERSION: I9300JKEMC1 on sammobile.
@jphilip04: not important. If you loose IMEI with old firmware, do nothing with OTA or KIES but flash immediatly the actual Israel-firmware with Odin.
rp158 said:
@jphilip04: not important. If you loose IMEI with old firmware, do nothing with OTA or KIES but flash immediatly the actual Israel-firmware with Odin.
Click to expand...
Click to collapse
I will try it. I'll give you an update asap once I have install it.
Thanks!