[Q] possible soft-brick & complete n00b to this gt-s5830i - Android Q&A, Help & Troubleshooting

hi guys an girls im bobert01
i hope i am posting in the correct place.
my friend has handed me an old ish phone he had
i have no idea what he has done to it but it needs fixing
it is stuck in some type of recovery (Clockworkmod recovery 5.0.2.6) and i cannot move up or down and everytime i boot up the phone its there and i cannot do anything
samsung galaxy ace gt-s5830i
how do i fix this back to what i believe is called stock ?

Related

[Q] please heeelp?? my galaxy mini not booting

i have my galaxy mini/pop rooted and running unofficial android 2.3.6
i did flash clockworkmod recovery from ROM Manager, when the CWM is flashed
the phone reboot but nothing happend, just the phone not booting i hold power
bouton, the phone dont boot, always black screen and nothing happend
How i can boot my phone again into any android??!!
please any ideas, i need help!!
AND I'M VERY SORRY ABOUT MY ENGLISH
another victim....
dont use rom manager to flash cwm.
there's many same case.. u got u'r phone bricked.
my advice, search how to unbrick your device, if no luck, bring it to service center to replace the motherboard....
Sent from my Nokia 3310
ahh.. man u shd hv done some reading before rooting.
rom manager/cwm dont go well with galaxy mini/pop. i hv read many users bricking their devices by this.
Sent from my Nexus One using Tapatalk

Soft briked or hard briked

Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy

[Q] Urgent help needed

hi to all
i have samsung galaxy s3 i9300 international version,...i had try to create a cwm rom backup on device storage....after that my phone starts getting restart continuosly....
then i restarted it to recovery mode and wiped the data+cache....aftet resetting it same result was there but now lcd starts invisible or too much fade after the samsung logo...n gettin unfortunately contacts,touchWiz,gallery etc stopped working errors...m getting blurry display now.....i dont know whatsgoing on....i shall e thankful to my helper.....eagerly waiting for responses sorry for bad english...
regards
flash a stock rom in Odin, factory reset from recovery. it's all in the stickies

[Q] i9070 soft brick/ nand rw corrupt, how to recover?

hi guys, i am new here.. im not really sure if the problem of my i9070 is soft brick or nand rw corruption.. but i will tell you what i have done that leads me to this problem...
my phone i samsung galaxy advance - jelly bean - rooted
i am using nobloat software and i want to delete bloatware to increase my ram.
i delete system apps and back up them... i put my phone on a table because i need to do something.
when i look again on my phone it is turned off.. and when i turned it on .. it just black screen and i cant access any apps i can only slide down the upper feature of the phone .. i guess i delete something important system apps.
so i use odin to flush my stock rom. it is successful.
but when the odin reboot my phone it stuck again on " samsung galaxy s advance gt 9070"
i guess my phone was soft brick or nand rw corrupted..
can you help me guys how to recover this? thanks in advance... i am having a big trouble here...
by the way i founf a tutorial how to recover this ,, it is for SII , can i used it?

Help with Samsung galaxy tab 4.8.0 SM-T1330NU booting up

First of all i'd like to say sorry if i put this in the wrong forum, i.m never good with this stuff.
So..... I messed up bad I tried rooting my samsung galaxy tab 4.8 and i dont know what happend. Im new with rooting. Yes im that one dumb kid who actually bricked something. Im currently on a booting loop. It turns on shows the Samsung Galaxy powered by android thing and then has the booting animation that says "Samsung" but then it will just stay playing that animation for ever. I dont want to factory reset either. (yes im also the noob who didnt backup the tablet, to be fair i couldnt even get twrp to work for some reason) Im wondering if there is a way I can find something like a iso where i can reinstall the Samsung kitkat 4.4 or what ever the name of the version was because i got horrible memory. Yes i understand im the living image of noob, with not backing up and messing up my tablet, go ahead laugh at my stupidity, but at least try and help
Thanks to anyone who can help or try. :good: :fingers-crossed:
Samsung Galaxy tab 4
SM-T1330NU

Categories

Resources