Okay so my razr is stuck in fastboot and i can't get out of it. Whenever i turn it on it goes to AP fastboot flash mode (s) (flash failure).
I'vetried flashing numerous things including, system.img, recovery.img, boot.img, empty.img_radi etc. I downloaded the fastboot package of the final ICS release as well but im not too sure what to do with it. After it tries to boot using fastboot, it say AP fastboot flash mode (s) (Boot failure) and below it says :
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status 0X004E)
Invalid CG OTV (CG: webtop)
Im not to sure what to try now. Im running out of things to try. This all happened after i used the droid utility to try and root my phone. My battery is OK and it says OK to program. Im desperate to so anything you guys can suggest i'll try. Thanks in advance!
Were you already on jellybean? If so, you can't go back to ics.
I'd say, download matt's utility, install drivers with it, then wipe and reinstall from that
Sent from my DROID RAZR using Tapatalk
jbag1489 said:
Were you already on jellybean? If so, you can't go back to ics.
I'd say, download matt's utility, install drivers with it, then wipe and reinstall from that
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
Yes I was in Jellybean. Which Utility should i use? So far I've tried 1.42, 1.6 and 1.82. In each case i get the same problem of " preflash FAILED remote". I've also tried using the BP tools however it just takes me to the boot logo for a split second then shows me a message of Boot failure
same situation here
apharasi said:
Okay so my razr is stuck in fastboot and i can't get out of it. Whenever i turn it on it goes to AP fastboot flash mode (s) (flash failure).
I'vetried flashing numerous things including, system.img, recovery.img, boot.img, empty.img_radi etc. I downloaded the fastboot package of the final ICS release as well but im not too sure what to do with it. After it tries to boot using fastboot, it say AP fastboot flash mode (s) (Boot failure) and below it says :
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status 0X004E)
Invalid CG OTV (CG: webtop)
Im not to sure what to try now. Im running out of things to try. This all happened after i used the droid utility to try and root my phone. My battery is OK and it says OK to program. Im desperate to so anything you guys can suggest i'll try. Thanks in advance!
Click to expand...
Click to collapse
I can't reflash stock via "Droid razr utility jellybean" the process failed du to battery low and it seems not charging at all . i lost cwm & stock recovery , now my phone is just brick can only do fastboot with low battery !
Related
i am stuck at the ap fastboot step when i tried to use the droid razr utilities tool to restore the rogers razr stock rom, cant boot the phone.
i am stuck at here:
AP fastboot Flash Mode (S) (Boot failure)
0A.0C
Device is locked, status code:0
Battery OK
OK to program
Connect USB
Data Cable
invalid CG OTV (CG system): Invalid SP Data
invalid CG HAB (CG:system, status 0X004E)
invalid CG OTV (CG: system)
i don't know what should i do next, can u please help???
Factory Cable for Razr
I am having the same issue...or actually, my buddy who tried to root his Razr and had asked for my help. I even got a factory cable, but so far, any and all instructions are quite vague. Can anyone provide a simple detailed step by step on how to fix this phone???
I don't understand where to use the CMD??? Empty radio users...HELP!!
hartlin said:
I am having the same issue...or actually, my buddy who tried to root his Razr and had asked for my help. I even got a factory cable, but so far, any and all instructions are quite vague. Can anyone provide a simple detailed step by step on how to fix this phone???
I don't understand where to use the CMD??? Empty radio users...HELP!!
Click to expand...
Click to collapse
My Droid Razr Maxx is European, I went through this before, first when in AP fastboot mode erase all what's on your Razr, fastboot -w, fastboot erase boot, fastboot erase system, fastboot erase preinstall, fastboot erase webtop.
Then try to download a different country system like (6.7.2-180_SLC-34_SIGNLATAM_USASPYDRETBRPLUSB1B2B5B8B8LA033.0R_SPYDERICSMAXRETBRLA_fastboot.xml) this is the one which I used of Brazil ICS 4.0.4 and re-flashed it using RSD Lite.
Then try re-flashing your own system.
It worked for me, hopefully it works for you.
baojerry123 said:
i am stuck at the ap fastboot step when i tried to use the droid razr utilities tool to restore the rogers razr stock rom, cant boot the phone.
i am stuck at here:
AP fastboot Flash Mode (S) (Boot failure)
0A.0C
Device is locked, status code:0
Battery OK
OK to program
Connect USB
Data Cable
invalid CG OTV (CG system): Invalid SP Data
invalid CG HAB (CG:system, status 0X004E)
invalid CG OTV (CG: system)
i don't know what should i do next, can u please help???
Click to expand...
Click to collapse
instead of the utilities tool, have u tried using the latest RSDLite? (and make sure u run as Admin if ur running it from Win7 or Win8.
grab the latest Rogers fastboot, RSD Lite, reboot phone to fastboot screen (which u might not need since ur stuck there already? but try reboot it anyway), and flash the img file.
let us know what happens.
Hi guys! I need help!
I have tried to flash my RAZR XT910 (EMEA) but something goes wrong and it's bricked.
Now I can use AP Fastboot only and If I select "Normal Powerup" or "Recovery" or "BP Tools", I get the "Dual Core" Motorola logo for a while, and then the following screen:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
I flashed the ROM Blur_Version.673.94.324.XT910.MERetail.en.06 (6.7.3-94_SPI-324) - Retail Asian through RSD, the result was Sucess, but it's not help.
Please help me to resolve this problem!
SOS! help needed!!
http://sbf.droid-developers.org/umt...PDRICSRTCEE_HWp2b_Service1FF_fastboot.xml.zip
Flash this one.
Gesendet von meinem XT890 mit Tapatalk 2
I just tried. Same result :crying:
Does anyone have any solution?
Stayers said:
Does anyone have any solution?
Click to expand...
Click to collapse
Go to recovery, make the wipes and flash the stock rom again
Semseddin said:
Go to recovery, make the wipes and flash the stock rom again
Click to expand...
Click to collapse
I can't go to recovery. If I select "Recovery", I get the "Dual Core" Motorola logo for a while, and then the following screen again:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
The only screen I can get to is the AP Fastboot
you need to get the factory cable from ebay and flash sbf for your region
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
I flash with a factory cable, i made it with this video: http://www.youtube.com/watch?v=XwwI_6doBWk
somebody else can help?
I flashed stock ISC (SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml) with RSD 5.7. The result was "PASS" but i still have a same problem! =((((
What can i do else? Maybe i can erase all partitions and flash it again?
fastboot erase userdata
fastboot erase cache
fastboot reboot
it didn't help me =(
factory cable
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
What is the difference between factory cable and normal cable? Will I able to flash official stock with factory cable?
So, I was trying to root the phone, something got messed up and now it fails to boot. When I try to boot normally or recorver I get:
----------------------------------------------------------------------------------------
Invalid Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG:system): Invalid SP Data
Invalid CG HAB (CG:system, status: 0X0056)
Invalid CG OTV (CG:system)
----------------------------------------------------------------------------------------
Right now I'm charging the phone again because the battery is low.
When I download the stock ROMs from anywhere I get 1 of 2 problems, either I cant extract it completely because:
1 or more files are "corrupt" or the XML file is "wrong"
or when using RSD lite It stops at 1/16 - 3/16 because "Phone returned fail"
All I need to do is reinstall the stock ROM or a custom one in order to even get the phone usable.
Is there a way to unlock the bootloader to install a ROM from this situation? I'm unable to boot normally or recovery.
Please help :c
MORE INFO:
So while trying to manually flash 4.1.2 jellybean back onto my razr, it wouldnt flash system.img or cdrom
Keeps telling me it failed, and when using RSDlite, it now goes up to about step 11/16 or 10/14 (depending on the fastboot files) which is where it's trying to flash system.img.
I need the xt912 4.1.2 jellybean fastboot files.
Right now I have the phone jumpcharging so there is no problem with low battery, but when flashing the phone I've tried RSD lite, fastboot.exe and moto-fastboot.exe/mfastboot.exe
When using any of those I just cant flash system.img and CDrom, sometimes in Matts utility it won't flash the preinstall.img.
saikitsune said:
So, I was trying to root the phone, something got messed up and now it fails to boot. When I try to boot normally or recorver I get:
----------------------------------------------------------------------------------------
Invalid Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG:system): Invalid SP Data
Invalid CG HAB (CG:system, status: 0X0056)
Invalid CG OTV (CG:system)
----------------------------------------------------------------------------------------
Right now I'm charging the phone again because the battery is low.
When I download the stock ROMs from anywhere I get 1 of 2 problems, either I cant extract it completely because:
1 or more files are "corrupt" or the XML file is "wrong"
or when using RSD lite It stops at 1/16 - 3/16 because "Phone returned fail"
All I need to do is reinstall the stock ROM or a custom one in order to even get the phone usable.
Is there a way to unlock the bootloader to install a ROM from this situation? I'm unable to boot normally or recovery.
Please help :c
MORE INFO:
So while trying to manually flash 4.1.2 jellybean back onto my razr, it wouldnt flash system.img or cdrom
Keeps telling me it failed, and when using RSDlite, it now goes up to about step 11/16 or 10/14 (depending on the fastboot files) which is where it's trying to flash system.img.
I need the xt912 4.1.2 jellybean fastboot files.
Right now I have the phone jumpcharging so there is no problem with low battery, but when flashing the phone I've tried RSD lite, fastboot.exe and moto-fastboot.exe/mfastboot.exe
When using any of those I just cant flash system.img and CDrom, sometimes in Matts utility it won't flash the preinstall.img.
Click to expand...
Click to collapse
Have you tried following this procedure?
http://www.youtube.com/watch?v=z9lPw5Lxpx4
Hi everybody,
I've a big problem with a friend's Motorola XT912 Verizon 4G-LTE
This phone was on 4.1.2
672.300.400.XT910.Asia3Retail.en.CN and GAS_ASIA_SPYDERICS_P008 but no Google APPS.
I rooted it and installed Safestrap recovery successfully but when i power it on it boot into AP Fastboot Mode, i everytime manually boot to normal boot by pressing the 3 butons. I used Matt's DROID_RAZR_Utility_Jellybean_XT912 to fix it. Done with success but no network!
I tried to fix it too and now my problem started.
My BIG mistake is i tried to flash another official firmware and now it's stuck on this screen:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Devices is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: Invalid SP Data)
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
Google for 672.300.400.XT910.Asia3Retail.en.CN and NOTHING found!!!
When i try with Matt's DROID_RAZR_Utility_Jellybean_XT912 i get errors on CDT.BIN file "infopreflash validation failure (No such file or directory)"
RSD Lite got error on "6/18 cdt.bin".
Same error with recovery, boot and devtree files!
Can't access into recovery mode too.
HELP ME! Someone can give me the link for the 672.300.400.XT910.Asia3Retail.en.CN version?
Or give me a solution to get this Rarz XT912 Verizon back! I'm desperate! :crying:
Come on guys need your help PLEASE!
Nobody can help me? Need help to take me out from this hell
Still waiting...
Are you positive it is an xt912? I see Asia in the firmware name suggesting it is actually an xt 910 (I.e. not us version for use on Verizon CDMA network, but the version designed for gsm networks everywhere except the us). If so you need the version of matt's utility designed for the xt910 in order to flash back to stock.
Sent from my Droid RAZR Maxx (XT912, spyder) using TapaTalk.
can use this rom "http://forum.xda-developers.com/showthread.php?t=2434629" and is perfect for walking with other DepNet.com for as kikat 4.4.2 .. I have no signal!
XT912 Verizon 4G-LTE problem
WaveMaster1406 said:
Hi everybody,
I've a big problem with a friend's Motorola XT912 Verizon 4G-LTE
This phone was on 4.1.2
672.300.400.XT910.Asia3Retail.en.CN and GAS_ASIA_SPYDERICS_P008 but no Google APPS.
I rooted it and installed Safestrap recovery successfully but when i power it on it boot into AP Fastboot Mode, i everytime manually boot to normal boot by pressing the 3 butons. I used Matt's DROID_RAZR_Utility_Jellybean_XT912 to fix it. Done with success but no network!
I tried to fix it too and now my problem started.
My BIG mistake is i tried to flash another official firmware and now it's stuck on this screen:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Devices is LOCKED. Status Code: 0
Battery OK
OK to Program
Transfer Mode:
USB Connected
Invalid CG OTV (CG: Invalid SP Data)
Invalid CG Version (CG: system)
Invalid CG OTV (CG: system)
Google for 672.300.400.XT910.Asia3Retail.en.CN and NOTHING found!!!
When i try with Matt's DROID_RAZR_Utility_Jellybean_XT912 i get errors on CDT.BIN file "infopreflash validation failure (No such file or directory)"
RSD Lite got error on "6/18 cdt.bin".
Same error with recovery, boot and devtree files!
Can't access into recovery mode too.
HELP ME! Someone can give me the link for the 672.300.400.XT910.Asia3Retail.en.CN version?
Or give me a solution to get this Rarz XT912 Verizon back! I'm desperate! :crying:
Click to expand...
Click to collapse
hi, am facing this same problem, been battling it for weeks now. please how did you resolve the issue? thanks much
I have a xt912 that i tried to root and install a custom rom. It all went successful. I was installing CM11 from custom recovery. It showed that the installaion was not successful. It did not turn on so I used Droid Razr Utility (which was successful previously) to flash it back to the stock firmware. It said thhat battery is low so it couldnt flash the stock rom. Now its stuck in fastboot mode and battery is low. When I reboot to bootloader and select the last option that says "tools", it does nothing and there is a text that says ap fastboot flash failure. I am now stuck. Can you help me out
Hi,
You need to charge the battery to do anything at this point. Here's a thread about that... You can ask for help on it here too..
http://forum.xda-developers.com/showthread.php?t=1549625
Good luck!
tried it, not working
@Darth I have tried it, its not working. After the motorola logo there is a screen that shows the following text:
Invalid flash mode (S) (Boot failure)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is locked, status code: 0
Battery low
Cannot program
Connect usb
Data cable
Invalid CC OTV (CG: system): Invalid SP data
Invalid CC HAB (CG: system, status: 0X004E)
Invalid CG OTV (CG: system)
I will have your thread moved to your device section.
?